Contract Source Code:
File 1 of 1 : TCPToken
pragma solidity ^0.4.24;
// produced by the Solididy File Flattener (c) David Appleton 2018
// contact : [email protected]
// released under Apache 2.0 licence
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender)
external view returns (uint256);
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value)
external returns (bool);
function transferFrom(address from, address to, uint256 value)
external returns (bool);
event Transfer(
address indexed from,
address indexed to,
uint256 value
);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
library SafeMath {
/**
* @dev Multiplies two numbers, reverts on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers truncating the quotient, reverts on division by zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0); // Solidity only automatically asserts when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
/**
* @dev Adds two numbers, reverts on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
/**
* @dev Divides two numbers and returns the remainder (unsigned integer modulo),
* reverts when dividing by zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
contract ERC20 is IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowed;
uint256 private _totalSupply;
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev Gets the balance of the specified address.
* @param owner The address to query the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address owner) public view returns (uint256) {
return _balances[owner];
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param owner address The address which owns the funds.
* @param spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(
address owner,
address spender
)
public
view
returns (uint256)
{
return _allowed[owner][spender];
}
/**
* @dev Transfer token for a specified address
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function transfer(address to, uint256 value) public returns (bool) {
_transfer(msg.sender, to, value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
*/
function approve(address spender, uint256 value) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
/**
* @dev Transfer tokens from one address to another
* @param from address The address which you want to send tokens from
* @param to address The address which you want to transfer to
* @param value uint256 the amount of tokens to be transferred
*/
function transferFrom(
address from,
address to,
uint256 value
)
public
returns (bool)
{
require(value <= _allowed[from][msg.sender]);
_allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
_transfer(from, to, value);
return true;
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param spender The address which will spend the funds.
* @param addedValue The amount of tokens to increase the allowance by.
*/
function increaseAllowance(
address spender,
uint256 addedValue
)
public
returns (bool)
{
require(spender != address(0));
_allowed[msg.sender][spender] = (
_allowed[msg.sender][spender].add(addedValue));
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param spender The address which will spend the funds.
* @param subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseAllowance(
address spender,
uint256 subtractedValue
)
public
returns (bool)
{
require(spender != address(0));
_allowed[msg.sender][spender] = (
_allowed[msg.sender][spender].sub(subtractedValue));
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Transfer token for a specified addresses
* @param from The address to transfer from.
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function _transfer(address from, address to, uint256 value) internal {
require(value <= _balances[from]);
require(to != address(0));
_balances[from] = _balances[from].sub(value);
_balances[to] = _balances[to].add(value);
emit Transfer(from, to, value);
}
/**
* @dev Internal function that mints an amount of the token and assigns it to
* an account. This encapsulates the modification of balances such that the
* proper events are emitted.
* @param account The account that will receive the created tokens.
* @param value The amount that will be created.
*/
function _mint(address account, uint256 value) internal {
require(account != 0);
_totalSupply = _totalSupply.add(value);
_balances[account] = _balances[account].add(value);
emit Transfer(address(0), account, value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account.
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burn(address account, uint256 value) internal {
require(account != 0);
require(value <= _balances[account]);
_totalSupply = _totalSupply.sub(value);
_balances[account] = _balances[account].sub(value);
emit Transfer(account, address(0), value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account, deducting from the sender's allowance for said account. Uses the
* internal burn function.
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burnFrom(address account, uint256 value) internal {
require(value <= _allowed[account][msg.sender]);
// Should https://github.com/OpenZeppelin/zeppelin-solidity/issues/707 be accepted,
// this function needs to emit an event with the updated approval.
_allowed[account][msg.sender] = _allowed[account][msg.sender].sub(
value);
_burn(account, value);
}
}
contract TCPToken is ERC20 {
string public constant name = "TCP";
string public constant symbol = "TCP";
uint8 public constant decimals = 8;
uint256 public constant INITIAL_SUPPLY = 1000000000 * (10 ** uint256(decimals));
/**
* @dev Constructor that gives msg.sender all of existing tokens.
*/
constructor() public {
_mint(msg.sender, INITIAL_SUPPLY);
}
}