Contract Name:
FreezeTokenWallet
Contract Source Code:
File 1 of 1 : FreezeTokenWallet
// File: @openzeppelin/contracts/math/SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: contracts/IERC20Cutted.sol
pragma solidity ^0.6.2;
interface IERC20Cutted {
// Some old tokens are implemented without a retrun parameter (this was prior to the ERC20 standart change)
function transfer(address to, uint256 value) external;
function balanceOf(address who) external view returns (uint256);
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/RetrieveTokensFeature.sol
pragma solidity ^0.6.2;
contract RetrieveTokensFeature is Context, Ownable {
function retrieveTokens(address to, address anotherToken) virtual public onlyOwner() {
IERC20Cutted alienToken = IERC20Cutted(anotherToken);
alienToken.transfer(to, alienToken.balanceOf(address(this)));
}
function retriveETH(address payable to) virtual public onlyOwner() {
to.transfer(address(this).balance);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: contracts/StagedCrowdsale.sol
pragma solidity ^0.6.2;
contract StagedCrowdsale is Context, Ownable {
using SafeMath for uint256;
using Address for address;
struct Milestone {
uint256 start;
uint256 end;
uint256 bonus;
uint256 minInvestedLimit;
uint256 maxInvestedLimit;
uint256 invested;
uint256 tokensSold;
uint256 hardcapInTokens;
}
Milestone[] public milestones;
function milestonesCount() public view returns (uint) {
return milestones.length;
}
function addMilestone(uint256 start, uint256 end, uint256 bonus, uint256 minInvestedLimit, uint256 maxInvestedLimit, uint256 invested, uint256 tokensSold, uint256 hardcapInTokens) public onlyOwner {
milestones.push(Milestone(start, end, bonus, minInvestedLimit, maxInvestedLimit, invested, tokensSold, hardcapInTokens));
}
function removeMilestone(uint8 number) public onlyOwner {
require(number < milestones.length);
//Milestone storage milestone = milestones[number];
delete milestones[number];
// check it
for (uint i = number; i < milestones.length - 1; i++) {
milestones[i] = milestones[i + 1];
}
}
function changeMilestone(uint8 number, uint256 start, uint256 end, uint256 bonus, uint256 minInvestedLimit, uint256 maxInvestedLimit, uint256 invested, uint256 tokensSold, uint256 hardcapInTokens) public onlyOwner {
require(number < milestones.length);
Milestone storage milestone = milestones[number];
milestone.start = start;
milestone.end = end;
milestone.bonus = bonus;
milestone.minInvestedLimit = minInvestedLimit;
milestone.maxInvestedLimit = maxInvestedLimit;
milestone.invested = invested;
milestone.tokensSold = tokensSold;
milestone.hardcapInTokens = hardcapInTokens;
}
function insertMilestone(uint8 index, uint256 start, uint256 end, uint256 bonus, uint256 minInvestedLimit, uint256 maxInvestedLimit, uint256 invested, uint256 tokensSold, uint256 hardcapInTokens) public onlyOwner {
require(index < milestones.length);
for (uint i = milestones.length; i > index; i--) {
milestones[i] = milestones[i - 1];
}
milestones[index] = Milestone(start, end, bonus, minInvestedLimit, maxInvestedLimit, invested, tokensSold, hardcapInTokens);
}
function clearMilestones() public onlyOwner {
require(milestones.length > 0);
for (uint i = 0; i < milestones.length; i++) {
delete milestones[i];
}
}
function currentMilestone() public view returns (uint256) {
for (uint256 i = 0; i < milestones.length; i++) {
if (now >= milestones[i].start && now < milestones[i].end && milestones[i].tokensSold <= milestones[i].hardcapInTokens) {
return i;
}
}
revert();
}
}
// File: contracts/CommonSale.sol
pragma solidity ^0.6.2;
contract CommonSale is StagedCrowdsale, RetrieveTokensFeature {
IERC20Cutted public token;
uint256 public price; // amount of tokens per 1 ETH
uint256 public invested;
uint256 public percentRate = 100;
address payable public wallet;
bool public isPause = false;
mapping(address => bool) public whitelist;
mapping(uint256 => mapping(address => uint256)) public balances;
mapping(uint256 => bool) public whitelistedMilestones;
function setMilestoneWithWhitelist(uint256 index) public onlyOwner {
whitelistedMilestones[index] = true;
}
function unsetMilestoneWithWhitelist(uint256 index) public onlyOwner {
whitelistedMilestones[index] = false;
}
function addToWhiteList(address target) public onlyOwner {
require(!whitelist[target], "Already in whitelist");
whitelist[target] = true;
}
function addToWhiteListMultiple(address[] memory targets) public onlyOwner {
for (uint i = 0; i < targets.length; i++) {
if (!whitelist[targets[i]]) whitelist[targets[i]] = true;
}
}
function pause() public onlyOwner {
isPause = true;
}
function unpause() public onlyOwner {
isPause = false;
}
function setToken(address newTokenAddress) public onlyOwner() {
token = IERC20Cutted(newTokenAddress);
}
function setPercentRate(uint256 newPercentRate) public onlyOwner() {
percentRate = newPercentRate;
}
function setWallet(address payable newWallet) public onlyOwner() {
wallet = newWallet;
}
function setPrice(uint256 newPrice) public onlyOwner() {
price = newPrice;
}
function updateInvested(uint256 value) internal {
invested = invested.add(value);
}
function internalFallback() internal returns (uint) {
require(!isPause, "Contract paused");
uint256 milestoneIndex = currentMilestone();
Milestone storage milestone = milestones[milestoneIndex];
uint256 limitedInvestValue = msg.value;
// limit the minimum amount for one transaction (ETH)
require(limitedInvestValue >= milestone.minInvestedLimit, "The amount is too small");
// check if the milestone requires user to be whitelisted
if (whitelistedMilestones[milestoneIndex]) {
require(whitelist[_msgSender()], "The address must be whitelisted!");
}
// limit the maximum amount that one user can spend during the current milestone (ETH)
uint256 maxAllowableValue = milestone.maxInvestedLimit - balances[milestoneIndex][_msgSender()];
if (limitedInvestValue > maxAllowableValue) {
limitedInvestValue = maxAllowableValue;
}
require(limitedInvestValue > 0, "Investment limit exceeded!");
// apply a bonus if any (10SET)
uint256 tokensWithoutBonus = limitedInvestValue.mul(price).div(1 ether);
uint256 tokensWithBonus = tokensWithoutBonus;
if (milestone.bonus > 0) {
tokensWithBonus = tokensWithoutBonus.add(tokensWithoutBonus.mul(milestone.bonus).div(percentRate));
}
// limit the number of tokens that user can buy according to the hardcap of the current milestone (10SET)
if (milestone.tokensSold.add(tokensWithBonus) > milestone.hardcapInTokens) {
tokensWithBonus = milestone.hardcapInTokens.sub(milestone.tokensSold);
if (milestone.bonus > 0) {
tokensWithoutBonus = tokensWithBonus.mul(percentRate).div(percentRate + milestone.bonus);
}
}
// calculate the resulting amount of ETH that user will spend and calculate the change if any
uint256 tokenBasedLimitedInvestValue = tokensWithoutBonus.mul(1 ether).div(price);
uint256 change = msg.value - tokenBasedLimitedInvestValue;
// update stats
invested = invested.add(tokenBasedLimitedInvestValue);
milestone.tokensSold = milestone.tokensSold.add(tokensWithBonus);
balances[milestoneIndex][_msgSender()] = balances[milestoneIndex][_msgSender()].add(tokenBasedLimitedInvestValue);
wallet.transfer(tokenBasedLimitedInvestValue);
// we multiply the amount to send by 100 / 98 to compensate the buyer 2% fee charged on each transaction
token.transfer(_msgSender(), tokensWithBonus.mul(100).div(98));
if (change > 0) {
_msgSender().transfer(change);
}
return tokensWithBonus;
}
receive() external payable {
internalFallback();
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/TenSetToken.sol
pragma solidity ^0.6.2;
contract TenSetToken is IERC20, RetrieveTokensFeature {
using SafeMath for uint256;
using Address for address;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant INITIAL_SUPPLY = 210000000 * 10 ** 18;
uint256 private constant BURN_STOP_SUPPLY = 2100000 * 10 ** 18;
uint256 private _tTotal = INITIAL_SUPPLY;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = "10Set Token";
string private _symbol = "10SET";
uint8 private _decimals = 18;
constructor (address[] memory addresses, uint256[] memory amounts) public {
uint256 rDistributed = 0;
// loop through the addresses array and send tokens to each address except the last one
// the corresponding amount to sent is taken from the amounts array
for(uint8 i = 0; i < addresses.length - 1; i++) {
(uint256 rAmount, , , , , , ) = _getValues(amounts[i]);
_rOwned[addresses[i]] = rAmount;
rDistributed = rDistributed + rAmount;
emit Transfer(address(0), addresses[i], amounts[i]);
}
// all remaining tokens will be sent to the last address in the addresses array
uint256 rRemainder = _rTotal - rDistributed;
address liQuidityWalletAddress = addresses[addresses.length - 1];
_rOwned[liQuidityWalletAddress] = rRemainder;
emit Transfer(address(0), liQuidityWalletAddress, tokenFromReflection(rRemainder));
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if (_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already included");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function burn(uint256 amount) public {
require(_msgSender() != address(0), "ERC20: burn from the zero address");
(uint256 rAmount, , , , , , ) = _getValues(amount);
_burn(_msgSender(), amount, rAmount);
}
function burnFrom(address account, uint256 amount) public {
require(account != address(0), "ERC20: burn from the zero address");
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
(uint256 rAmount, , , , , , ) = _getValues(amount);
_burn(account, amount, rAmount);
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount, , , , , , ) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns (uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount, , , , , , ) = _getValues(tAmount);
return rAmount;
} else {
( , uint256 rTransferAmount, , , , , ) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns (uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
if (tBurn > 0) {
_reflectBurn(rBurn, tBurn, sender);
}
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
if (tBurn > 0) {
_reflectBurn(rBurn, tBurn, sender);
}
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
if (tBurn > 0) {
_reflectBurn(rBurn, tBurn, sender);
}
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn, uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
if (tBurn > 0) {
_reflectBurn(rBurn, tBurn, sender);
}
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _reflectBurn(uint256 rBurn, uint256 tBurn, address account) private {
_rTotal = _rTotal.sub(rBurn);
_tTotal = _tTotal.sub(tBurn);
emit Transfer(account, address(0), tBurn);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tBurn) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 rBurn) = _getRValues(tAmount, tFee, tBurn);
return (rAmount, rTransferAmount, rFee, rBurn, tTransferAmount, tFee, tBurn);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.div(100);
uint256 tTransferAmount = tAmount.sub(tFee);
uint256 tBurn = 0;
if (_tTotal > BURN_STOP_SUPPLY) {
tBurn = tAmount.div(100);
if (_tTotal < BURN_STOP_SUPPLY.add(tBurn)) {
tBurn = _tTotal.sub(BURN_STOP_SUPPLY);
}
tTransferAmount = tTransferAmount.sub(tBurn);
}
return (tTransferAmount, tFee, tBurn);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tBurn) private view returns (uint256, uint256, uint256, uint256) {
uint256 currentRate = _getRate();
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rBurn = 0;
uint256 rTransferAmount = rAmount.sub(rFee);
if (tBurn > 0) {
rBurn = tBurn.mul(currentRate);
rTransferAmount = rTransferAmount.sub(rBurn);
}
return (rAmount, rTransferAmount, rFee, rBurn);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _burn(address account, uint256 tAmount, uint256 rAmount) private {
if (_isExcluded[account]) {
_tOwned[account] = _tOwned[account].sub(tAmount, "ERC20: burn amount exceeds balance");
_rOwned[account] = _rOwned[account].sub(rAmount, "ERC20: burn amount exceeds balance");
} else {
_rOwned[account] = _rOwned[account].sub(rAmount, "ERC20: burn amount exceeds balance");
}
_reflectBurn(rAmount, tAmount, account);
}
}
// File: contracts/FreezeTokenWallet.sol
pragma solidity ^0.6.2;
contract FreezeTokenWallet is RetrieveTokensFeature {
using SafeMath for uint256;
IERC20Cutted public token;
bool public started;
uint256 public startDate;
uint256 public startBalance;
uint256 public duration;
uint256 public interval;
uint256 public retrievedTokens;
modifier notStarted() {
require(!started);
_;
}
function setStartDate(uint newStartDate) public onlyOwner notStarted {
startDate = newStartDate;
}
function setDuration(uint newDuration) public onlyOwner notStarted {
duration = newDuration * 1 days;
}
function setInterval(uint newInterval) public onlyOwner notStarted {
interval = newInterval * 1 days;
}
function setToken(address newToken) public onlyOwner notStarted {
token = IERC20Cutted(newToken);
}
function start() public onlyOwner notStarted {
startBalance = token.balanceOf(address(this));
started = true;
}
function retrieveWalletTokens(address to) public onlyOwner {
require(started && now >= startDate);
if (now >= startDate + duration) {
token.transfer(to, token.balanceOf(address(this)));
} else {
uint parts = duration.div(interval);
uint tokensByPart = startBalance.div(parts);
uint timeSinceStart = now.sub(startDate);
uint pastParts = timeSinceStart.div(interval);
uint tokensToRetrieveSinceStart = pastParts.mul(tokensByPart);
uint tokensToRetrieve = tokensToRetrieveSinceStart.sub(retrievedTokens);
require(tokensToRetrieve > 0, "No tokens available for retrieving at this moment.");
retrievedTokens = retrievedTokens.add(tokensToRetrieve);
token.transfer(to, tokensToRetrieve);
}
}
function retrieveTokens(address to, address anotherToken) override public onlyOwner {
require(address(token) != anotherToken, "You should only use this method to withdraw extraneous tokens.");
super.retrieveTokens(to, anotherToken);
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/TokenDistributor.sol
pragma solidity ^0.6.2;
contract TokenDistributor is Ownable, RetrieveTokensFeature {
IERC20Cutted public token;
function setToken(address newTokenAddress) public onlyOwner {
token = IERC20Cutted(newTokenAddress);
}
function distribute(address[] memory receivers, uint[] memory balances) public onlyOwner {
for(uint i = 0; i < receivers.length; i++) {
token.transfer(receivers[i], balances[i]);
}
}
}
// File: contracts/TokenReplacementConfigurator.sol
pragma solidity ^0.6.2;
/**
* @dev Contract-helper for TenSetToken deployment and token distribution.
*
* 1. Company Reserve (10%): 21,000,000 10SET. The total freezing period is 48 months.
* Every 12 months, 25% of the initial amount will be unfrozen and ready for
* withdrawal using address 0x7BD3b301f3537c75bf64B7468998d20045cfa48e.
*
* 2. Team (10%): 21,000,000 10SET. The total freezing period is 30 months.
* Every 3 months, 10% of the initial amount will be unfrozen and ready for
* withdrawal using address 0x44C4A8d57B22597a2c0397A15CF1F32d8A4EA8F7.
*
* 3. Marketing (5%): 10,500,000 10SET.
* A half (5,250,000 10SET) will be transferred immediately to the address
* 0x127D069DC8B964a813889D349eD3dA3f6D35383D.
* The remaining 5,250,000 10SET will be frozen for 12 months.
* Every 3 months, 25% of the initial amount will be unfrozen and ready for
* withdrawal using address 0x127D069DC8B964a813889D349eD3dA3f6D35383D.
*
* 4. Sales: 150,000,000 10SET (147,000,000 10SET plus compensation for the
* initial 2% transferring costs). These tokens will be distributed between
* the CommonSale contract and existing users who participated in the first phase of the sale.
*
* 5. Liquidity Reserve: 7,500,000 10SET (10,500,000 10SET minus tokens that
* went to compensation in paragraph 4). The entire amount will be unfrozen
* from the start and sent to the address 0x91E84302594deFaD552938B6D0D56e9f39908f9F.
*/
contract TokenReplacementConfigurator is RetrieveTokensFeature {
using SafeMath for uint256;
uint256 private constant COMPANY_RESERVE_AMOUNT = 21000000 * 1 ether;
uint256 private constant TEAM_AMOUNT = 21000000 * 1 ether;
uint256 private constant MARKETING_AMOUNT_1 = 5250000 * 1 ether;
uint256 private constant MARKETING_AMOUNT_2 = 5250000 * 1 ether;
uint256 private constant LIQUIDITY_RESERVE = 7500000 * 1 ether;
address private constant OWNER_ADDRESS = address(0x68CE6F1A63CC76795a70Cf9b9ca3f23293547303);
address private constant TEAM_WALLET_OWNER_ADDRESS = address(0x44C4A8d57B22597a2c0397A15CF1F32d8A4EA8F7);
address private constant MARKETING_WALLET_ADDRESS = address(0x127D069DC8B964a813889D349eD3dA3f6D35383D);
address private constant COMPANY_RESERVE_ADDRESS = address(0x7BD3b301f3537c75bf64B7468998d20045cfa48e);
address private constant LIQUIDITY_WALLET_ADDRESS = address(0x91E84302594deFaD552938B6D0D56e9f39908f9F);
address private constant DEPLOYER_ADDRESS = address(0x6E9DC3D20B906Fd2B52eC685fE127170eD2165aB);
uint256 private constant STAGE1_START_DATE = 1612116000; // Jan 31 2021 19:00:00 GMT+0100
TenSetToken public token;
FreezeTokenWallet public companyReserveWallet;
FreezeTokenWallet public teamWallet;
FreezeTokenWallet public marketingWallet;
TokenDistributor public tokenDistributor;
constructor () public {
address[] memory addresses = new address[](6);
uint256[] memory amounts = new uint256[](5);
companyReserveWallet = new FreezeTokenWallet();
teamWallet = new FreezeTokenWallet();
marketingWallet = new FreezeTokenWallet();
tokenDistributor = new TokenDistributor();
addresses[0] = address(companyReserveWallet);
amounts[0] = COMPANY_RESERVE_AMOUNT;
addresses[1] = address(teamWallet);
amounts[1] = TEAM_AMOUNT;
addresses[2] = MARKETING_WALLET_ADDRESS;
amounts[2] = MARKETING_AMOUNT_1;
addresses[3] = address(marketingWallet);
amounts[3] = MARKETING_AMOUNT_2;
addresses[4] = LIQUIDITY_WALLET_ADDRESS;
amounts[4] = LIQUIDITY_RESERVE;
// will receive the remaining tokens to distribute them between CommonSale contract
// and existing users who participated in the first phase of the sale.
addresses[5] = address(tokenDistributor);
token = new TenSetToken(addresses, amounts);
companyReserveWallet.setToken(address(token));
companyReserveWallet.setStartDate(STAGE1_START_DATE);
companyReserveWallet.setDuration(1440); // 4 years = 48 months = 1440 days
companyReserveWallet.setInterval(360); // 12 months = 360 days
companyReserveWallet.start();
teamWallet.setToken(address(token));
teamWallet.setStartDate(STAGE1_START_DATE);
teamWallet.setDuration(900); // 2.5 years = 30 months = 900 days
teamWallet.setInterval(90); // 3 months = 90 days
teamWallet.start();
marketingWallet.setToken(address(token));
marketingWallet.setStartDate(STAGE1_START_DATE);
marketingWallet.setDuration(360); // 1 year = 12 months = 360 days
marketingWallet.setInterval(90); // 3 months = 90 days
marketingWallet.start();
tokenDistributor.setToken(address(token));
token.transferOwnership(OWNER_ADDRESS);
companyReserveWallet.transferOwnership(COMPANY_RESERVE_ADDRESS);
teamWallet.transferOwnership(TEAM_WALLET_OWNER_ADDRESS);
marketingWallet.transferOwnership(MARKETING_WALLET_ADDRESS);
tokenDistributor.transferOwnership(DEPLOYER_ADDRESS);
}
}