ETH Price: $2,993.28 (+2.38%)
Gas: 7 Gwei

Contract Diff Checker

Contract Name:
Route

Contract Source Code:

File 1 of 1 : Route

// File: contracts/SafeMath.sol

pragma solidity >=0.5.16;

// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, errorMessage);

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot underflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction underflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot underflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, errorMessage);

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers.
     * Reverts on division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers.
     * Reverts with custom message on division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: contracts/NativeMetaTransaction/Initializable.sol

pragma solidity >= 0.6.6;

contract Initializable {
    bool inited = false;

    modifier initializer() {
        require(!inited, "already inited");
        _;
        inited = true;
    }
}

// File: contracts/NativeMetaTransaction/EIP712Base.sol

pragma solidity >= 0.6.6;


contract EIP712Base is Initializable {
    struct EIP712Domain {
        string name;
        string version;
        address verifyingContract;
        uint256 chainId;
    }

    string constant public ERC712_VERSION = "1";

    bytes32 internal constant EIP712_DOMAIN_TYPEHASH = keccak256(
        bytes(
            "EIP712Domain(string name,string version,address verifyingContract,uint256 chainId)"
        )
    );
    bytes32 internal domainSeperator;

    // supposed to be called once while initializing.
    // one of the contractsa that inherits this contract follows proxy pattern
    // so it is not possible to do this in a constructor
    function _initializeEIP712(
        string memory name
    )
        internal
        initializer
    {
        _setDomainSeperator(name);
    }

    function _setDomainSeperator(string memory name) internal {
        domainSeperator = keccak256(
            abi.encode(
                EIP712_DOMAIN_TYPEHASH,
                keccak256(bytes(name)),
                keccak256(bytes(ERC712_VERSION)),
                address(this),
                getChainId()
            )
        );
    }

    function getDomainSeperator() public view returns (bytes32) {
        return domainSeperator;
    }

    function getChainId() public pure returns (uint256) {
        uint256 id;
        assembly {
            id := chainid()
        }
        return id;
    }

    /**
     * Accept message hash and returns hash message in EIP712 compatible form
     * So that it can be used to recover signer from signature signed using EIP712 formatted data
     * https://eips.ethereum.org/EIPS/eip-712
     * "\\x19" makes the encoding deterministic
     * "\\x01" is the version byte to make it compatible to EIP-191
     */
    function toTypedMessageHash(bytes32 messageHash)
        internal
        view
        returns (bytes32)
    {
        return
            keccak256(
                abi.encodePacked("\x19\x01", getDomainSeperator(), messageHash)
            );
    }
}

// File: contracts/NativeMetaTransaction/NativeMetaTransaction.sol

pragma solidity >= 0.6.6;



contract NativeMetaTransaction is EIP712Base {
    using SafeMath for uint;
    bytes32 private constant META_TRANSACTION_TYPEHASH = keccak256(
        bytes(
            "MetaTransaction(uint256 nonce,address from,bytes functionSignature)"
        )
    );
    event MetaTransactionExecuted(
        address userAddress,
        address payable relayerAddress,
        bytes functionSignature
    );
    mapping(address => uint256) public nonces;

    /*
     * Meta transaction structure.
     * No point of including value field here as if user is doing value transfer then he has the funds to pay for gas
     * He should call the desired function directly in that case.
     */
    struct MetaTransaction {
        uint256 nonce;
        address from;
        bytes functionSignature;
    }

    function executeMetaTransaction(
        address userAddress,
        bytes memory functionSignature,
        bytes32 sigR,
        bytes32 sigS,
        uint8 sigV
    ) public payable returns (bytes memory) {
        MetaTransaction memory metaTx = MetaTransaction({
            nonce: nonces[userAddress],
            from: userAddress,
            functionSignature: functionSignature
        });

        require(
            verify(userAddress, metaTx, sigR, sigS, sigV),
            "Signer and signature do not match"
        );

        // increase nonce for user (to avoid re-use)
        nonces[userAddress] = nonces[userAddress].add(1);

        emit MetaTransactionExecuted(
            userAddress,
            msg.sender,
            functionSignature
        );

        // Append userAddress and relayer address at the end to extract it from calling context
        (bool success, bytes memory returnData) = address(this).call(
            abi.encodePacked(functionSignature, userAddress)
        );
        require(success, "Function call not successful");

        return returnData;
    }

    function hashMetaTransaction(MetaTransaction memory metaTx)
        internal
        pure
        returns (bytes32)
    {
        return
            keccak256(
                abi.encode(
                    META_TRANSACTION_TYPEHASH,
                    metaTx.nonce,
                    metaTx.from,
                    keccak256(metaTx.functionSignature)
                )
            );
    }

    function getNonce(address user) public view returns (uint256 nonce) {
        nonce = nonces[user];
    }

    function verify(
        address signer,
        MetaTransaction memory metaTx,
        bytes32 sigR,
        bytes32 sigS,
        uint8 sigV
    ) internal view returns (bool) {
        require(signer != address(0), "NativeMetaTransaction: INVALID_SIGNER");
        return
            signer ==
            ecrecover(
                toTypedMessageHash(hashMetaTransaction(metaTx)),
                sigV,
                sigR,
                sigS
            );
    }

    function _msgSender() internal view returns (address payable sender) {
        if(msg.sender == address(this)) {
            bytes memory array = msg.data;
            uint256 index = msg.data.length;
            assembly {
                // Load the 32 bytes word from memory with the address on the lower 20 bytes, and mask those.
                sender := and(mload(add(array, index)), 0xffffffffffffffffffffffffffffffffffffffff)
            }
        } else {
            sender = msg.sender;
        }
        return sender;
    }

}

// File: contracts/Route.sol

pragma solidity >=0.6.6;
pragma experimental ABIEncoderV2;



contract Route is NativeMetaTransaction {
    // @notice EIP-20 token name for this token
    string public constant name = "Route";

    // @notice EIP-20 token symbol for this token
    string public constant symbol = "ROUTE";

    // @notice EIP-20 token decimals for this token
    uint8 public constant decimals = 18;

    // @notice Total number of tokens in circulation
    uint public totalSupply = 20_000_000e18; // 20 Million Route Tokens

    // @notice Allowance amounts on behalf of others
    mapping (address => mapping (address => uint256)) internal allowances;

    // @notice Official record of token balances for each account
    mapping (address => uint256) internal balances;

    // @notice A record of each accounts delegate
    mapping (address => address) public delegates;

    // @notice A checkpoint for marking number of votes from a given block
    struct Checkpoint {
        uint32 fromBlock;
        uint256 votes;
    }

    // @notice A record of votes checkpoints for each account, by index
    mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;

    // @notice The number of checkpoints for each account
    mapping (address => uint32) public numCheckpoints;

    // @notice The EIP-712 typehash for the contract's domain
    bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");

    // @notice The EIP-712 typehash for the delegation struct used by the contract
    bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    // @notice The EIP-712 typehash for the permit struct used by the contract
    bytes32 public constant PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    // // @notice A record of states for signing / validating signatures
    // mapping (address => uint) public nonces;

    // @notice An event thats emitted when an account changes its delegate
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    // @notice An event thats emitted when a delegate account's vote balance changes
    event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);

    // @notice The standard EIP-20 transfer event
    event Transfer(address indexed from, address indexed to, uint256 amount);

    // @notice The standard EIP-20 approval event
    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /**
     * @notice Construct a new Route token
     */
    constructor() public {
        balances[_msgSender()] = uint256(totalSupply);
        emit Transfer(address(0), _msgSender(), totalSupply);
    }

    /**
     * @notice Get the number of tokens `spender` is approved to spend on behalf of `account`
     * @param account The address of the account holding the funds
     * @param spender The address of the account spending the funds
     * @return The number of tokens approved
     */
    function allowance(address account, address spender) external view returns (uint) {
        return allowances[account][spender];
    }

    /**
     * @notice Approve `spender` to transfer up to `amount` from `src`
     * @dev This will overwrite the approval amount for `spender`
     *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
     * @param spender The address of the account which may transfer tokens
     * @param rawAmount The number of tokens that are approved (2^256-1 means infinite)
     * @return Whether or not the approval succeeded
     */
    function approve(address spender, uint rawAmount) external returns (bool) {
        uint256 amount;
        if (rawAmount == uint(-1)) {
            amount = uint256(-1);
        } else {
            amount = safe256(rawAmount, "Route::approve: amount exceeds 96 bits");
        }

        allowances[_msgSender()][spender] = amount;

        emit Approval(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @notice Triggers an approval from owner to spends
     * @param owner The address to approve from
     * @param spender The address to be approved
     * @param rawAmount The number of tokens that are approved (2^256-1 means infinite)
     * @param deadline The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function permit(address owner, address spender, uint rawAmount, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
        uint256 amount;
        if (rawAmount == uint(-1)) {
            amount = uint256(-1);
        } else {
            amount = safe256(rawAmount, "Route::permit: amount exceeds 96 bits");
        }

        bytes32 domainSeparator = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name)), getChainId(), address(this)));
        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, rawAmount, nonces[owner]++, deadline));
        bytes32 digest = keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
        address signatory = ecrecover(digest, v, r, s);
        require(signatory != address(0), "Route::permit: invalid signature");
        require(signatory == owner, "Route::permit: unauthorized");
        require(block.timestamp <= deadline, "Route::permit: signature expired");

        allowances[owner][spender] = amount;

        emit Approval(owner, spender, amount);
    }

    /**
     * @notice Get the number of tokens held by the `account`
     * @param account The address of the account to get the balance of
     * @return The number of tokens held
     */
    function balanceOf(address account) external view returns (uint) {
        return balances[account];
    }

    /**
     * @notice Transfer `amount` tokens from `_msgSender()` to `dst`
     * @param dst The address of the destination account
     * @param rawAmount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transfer(address dst, uint rawAmount) external returns (bool) {
        uint256 amount = safe256(rawAmount, "Route::transfer: amount exceeds 96 bits");
        _transferTokens(_msgSender(), dst, amount);
        return true;
    }

    /**
     * @notice Transfer `amount` tokens from `src` to `dst`
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param rawAmount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transferFrom(address src, address dst, uint rawAmount) external returns (bool) {
        address spender = _msgSender();
        uint256 spenderAllowance = allowances[src][spender];
        uint256 amount = safe256(rawAmount, "Route::approve: amount exceeds 96 bits");

        if (spender != src && spenderAllowance != uint256(-1)) {
            uint256 newAllowance = sub256(spenderAllowance, amount, "Route::transferFrom: transfer amount exceeds spender allowance");
            allowances[src][spender] = newAllowance;

            emit Approval(src, spender, newAllowance);
        }

        _transferTokens(src, dst, amount);
        return true;
    }

    /**
     * @notice Delegate votes from `_msgSender()` to `delegatee`
     * @param delegatee The address to delegate votes to
     */
    function delegate(address delegatee) public {
        return _delegate(_msgSender(), delegatee);
    }

    /**
     * @notice Delegates votes from signatory to `delegatee`
     * @param delegatee The address to delegate votes to
     * @param nonce The contract state required to match the signature
     * @param expiry The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function delegateBySig(address delegatee, uint nonce, uint expiry, uint8 v, bytes32 r, bytes32 s) public {
        bytes32 domainSeparator = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes(name)), getChainId(), address(this)));
        bytes32 structHash = keccak256(abi.encode(DELEGATION_TYPEHASH, delegatee, nonce, expiry));
        bytes32 digest = keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
        address signatory = ecrecover(digest, v, r, s);
        require(signatory != address(0), "Route::delegateBySig: invalid signature");
        require(nonce == nonces[signatory]++, "Route::delegateBySig: invalid nonce");
        require(block.timestamp <= expiry, "Route::delegateBySig: signature expired");
        return _delegate(signatory, delegatee);
    }

    /**
     * @notice Gets the current votes balance for `account`
     * @param account The address to get votes balance
     * @return The number of current votes for `account`
     */
    function getCurrentVotes(address account) external view returns (uint256) {
        uint32 nCheckpoints = numCheckpoints[account];
        return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
    }

    /**
     * @notice Determine the prior number of votes for an account as of a block number
     * @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
     * @param account The address of the account to check
     * @param blockNumber The block number to get the vote balance at
     * @return The number of votes the account had as of the given block
     */
    function getPriorVotes(address account, uint blockNumber) public view returns (uint256) {
        require(blockNumber < block.number, "Route::getPriorVotes: not yet determined");

        uint32 nCheckpoints = numCheckpoints[account];
        if (nCheckpoints == 0) {
            return 0;
        }

        // First check most recent balance
        if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
            return checkpoints[account][nCheckpoints - 1].votes;
        }

        // Next check implicit zero balance
        if (checkpoints[account][0].fromBlock > blockNumber) {
            return 0;
        }

        uint32 lower = 0;
        uint32 upper = nCheckpoints - 1;
        while (upper > lower) {
            uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
            Checkpoint memory cp = checkpoints[account][center];
            if (cp.fromBlock == blockNumber) {
                return cp.votes;
            } else if (cp.fromBlock < blockNumber) {
                lower = center;
            } else {
                upper = center - 1;
            }
        }
        return checkpoints[account][lower].votes;
    }

    function _delegate(address delegator, address delegatee) internal {
        address currentDelegate = delegates[delegator];
        uint256 delegatorBalance = balances[delegator];
        delegates[delegator] = delegatee;

        emit DelegateChanged(delegator, currentDelegate, delegatee);

        _moveDelegates(currentDelegate, delegatee, delegatorBalance);
    }

    function _transferTokens(address src, address dst, uint256 amount) internal {
        require(src != address(0), "Route::_transferTokens: cannot transfer from the zero address");
        require(dst != address(0), "Route::_transferTokens: cannot transfer to the zero address");

        balances[src] = sub256(balances[src], amount, "Route::_transferTokens: transfer amount exceeds balance");
        balances[dst] = add256(balances[dst], amount, "Route::_transferTokens: transfer amount overflows");
        emit Transfer(src, dst, amount);

        _moveDelegates(delegates[src], delegates[dst], amount);
    }

    function _moveDelegates(address srcRep, address dstRep, uint256 amount) internal {
        if (srcRep != dstRep && amount > 0) {
            if (srcRep != address(0)) {
                uint32 srcRepNum = numCheckpoints[srcRep];
                uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
                uint256 srcRepNew = sub256(srcRepOld, amount, "Route::_moveVotes: vote amount underflows");
                _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
            }

            if (dstRep != address(0)) {
                uint32 dstRepNum = numCheckpoints[dstRep];
                uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
                uint256 dstRepNew = add256(dstRepOld, amount, "Route::_moveVotes: vote amount overflows");
                _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
            }
        }
    }

    function _writeCheckpoint(address delegatee, uint32 nCheckpoints, uint256 oldVotes, uint256 newVotes) internal {
      uint32 blockNumber = safe32(block.number, "Route::_writeCheckpoint: block number exceeds 32 bits");

      if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
          checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
      } else {
          checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
          numCheckpoints[delegatee] = nCheckpoints + 1;
      }

      emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
    }

    function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function safe256(uint n, string memory errorMessage) internal pure returns (uint256) {
        return uint256(n);
    }

    function add256(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, errorMessage);
        return c;
    }

    function sub256(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
}

Please enter a contract address above to load the contract details and source code.

Context size (optional):