Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Is this a proxy?
• Similar
• Sol2Uml
• Submit Audit
• Compare

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address} from "@openzeppelin/contracts/utils/Address.sol";
import { IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20} from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { SafeMath} from "@openzeppelin/contracts/math/SafeMath.sol";
import { ReentrancyGuard} from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import { IController } from "../interfaces/IController.sol";
import { IIntegrationRegistry } from "../interfaces/IIntegrationRegistry.sol";
import { IWrapV2Adapter} from "../interfaces/IWrapV2Adapter.sol";
import { IDebtIssuanceModule} from "../interfaces/IDebtIssuanceModule.sol";
import { ISetToken} from "../interfaces/ISetToken.sol";
import { IWETH} from "../interfaces/IWETH.sol";
import { IWrapModuleV2} from "../interfaces/IWrapModuleV2.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { DEXAdapter } from "./DEXAdapter.sol";

import "hardhat/console.sol";

/**
 * @title FlashMintWrapped
 *
 * Flash issues SetTokens whose components contain wrapped tokens.
 *
 * Compatible with:
 * IssuanceModules: DebtIssuanceModule, DebtIssuanceModuleV2
 * WrapAdapters: IWrapV2Adapter
 *
 * Supports flash minting for sets that contain both unwrapped and wrapped components.
 * Does not support debt positions on Set token.
 * Wrapping / Unwrapping is skipped for a component if ComponentSwapData[component_index].underlyingERC20 address == set component address
 *
 * If the set contains both the wrapped and unwrapped version of a token (e.g. DAI and cDAI)
 * ->  two separate component data points have to be supplied in _swapData and _wrapData
 * e.g. for issue
 * Set components at index 0 = DAI; then -> ComponentSwapData[0].underlyingERC20 = DAI; (no wrapping will happen)
 * Set components at index 1 = cDAI; then -> ComponentSwapData[1].underlyingERC20 = DAI; (wrapping will happen)
 */
contract FlashMintWrapped is Ownable, ReentrancyGuard {
  using DEXAdapter for DEXAdapter.Addresses;
  using Address for address payable;
  using Address for address;
  using SafeMath for uint256;
  using SafeERC20 for IERC20;
  using SafeERC20 for ISetToken;

  /* ============ Structs ============ */

  struct ComponentSwapData {
    // unwrapped token version, e.g. DAI
    address underlyingERC20;
    // swap data for DEX operation: fees, path, etc. see DEXAdapter.SwapData
    DEXAdapter.SwapData dexData;
    // ONLY relevant for issue, not used for redeem:
    // amount that has to be bought of the unwrapped token version (to cover required wrapped component amounts for issuance)
    // this amount has to be computed beforehand through the exchange rate of wrapped Component <> unwrappedComponent
    // i.e. getRequiredComponentIssuanceUnits() on the IssuanceModule and then convert units through exchange rate to unwrapped component units
    // e.g. 300 cDAI needed for issuance of 1 Set token. exchange rate 1cDAI = 0.05 DAI. -> buyUnderlyingAmount = 0.05 DAI * 300 = 15 DAI
    uint256 buyUnderlyingAmount;
  }

  struct ComponentWrapData {
    string integrationName; // wrap adapter integration name as listed in the IntegrationRegistry for the wrapModule
    bytes wrapData; // optional wrapData passed to the wrapAdapter
  }

  /* ============ Constants ============= */

  uint256 private constant MAX_UINT256 = type(uint256).max;

  /* ============ Immutables ============ */

  IController public immutable setController;
  IDebtIssuanceModule public immutable issuanceModule; // interface is compatible with DebtIssuanceModuleV2
  address public immutable wrapModule; // used to obtain a valid wrap adapter

  /* ============ State Variables ============ */

  DEXAdapter.Addresses public dexAdapter;

  /* ============ Events ============ */

  event FlashMint(
    address indexed _recipient, // The recipient address of the minted Set token
    ISetToken indexed _setToken, // The minted Set token
    IERC20 indexed _inputToken, // The address of the input asset(ERC20/ETH) used to mint the Set tokens
    uint256 _amountInputToken, // The amount of input tokens used for minting
    uint256 _amountSetIssued // The amount of Set tokens received by the recipient
  );

  event FlashRedeem(
    address indexed _recipient, // The recipient address which redeemed the Set token
    ISetToken indexed _setToken, // The redeemed Set token
    IERC20 indexed _outputToken, // The address of output asset(ERC20/ETH) received by the recipient
    uint256 _amountSetRedeemed, // The amount of Set token redeemed for output tokens
    uint256 _amountOutputToken // The amount of output tokens received by the recipient
  );

  /* ============ Modifiers ============ */

  /**
   * checks that _setToken is a valid listed set token on the setController
   *
   * @param _setToken       set token to check
   */
  modifier isSetToken(ISetToken _setToken) {
    require(setController.isSet(address(_setToken)), "FlashMint: INVALID_SET");
    _;
  }

  /**
   * checks that _inputToken is the first adress in _path and _outputToken is the last address in _path
   *
   * @param _path                      Array of addresses for a DEX swap path
   * @param _inputToken                input token of DEX swap
   * @param _outputToken               output token of DEX swap
   */
  modifier isValidPath(
    address[] memory _path,
    address _inputToken,
    address _outputToken
  ) {
    if (_inputToken != _outputToken) {
      require(
        _path[0] == _inputToken ||
          (_inputToken == dexAdapter.weth && _path[0] == DEXAdapter.ETH_ADDRESS),
        "FlashMint: INPUT_TOKEN_NOT_IN_PATH"
      );
      require(
        _path[_path.length - 1] == _outputToken ||
          (_outputToken == dexAdapter.weth && _path[_path.length - 1] == DEXAdapter.ETH_ADDRESS),
        "FlashMint: OUTPUT_TOKEN_NOT_IN_PATH"
      );
    }
    _;
  }

  /* ========== Constructor ========== */

  /**
   * Constructor initializes various addresses
   *
   * @param _dexAddresses              Address of quickRouter, sushiRouter, uniV3Router, uniV3Router, curveAddressProvider, curveCalculator and weth.
   * @param _setController             Set token controller used to verify a given token is a set
   * @param _issuanceModule            IDebtIssuanceModule used to issue and redeem tokens
   * @param _wrapModule                WrapModuleV2 used to obtain a valid wrap adapter
   */
  constructor(
    DEXAdapter.Addresses memory _dexAddresses,
    IController _setController,
    IDebtIssuanceModule _issuanceModule,
    address _wrapModule
  ) public {
    dexAdapter = _dexAddresses;
    setController = _setController;
    issuanceModule = _issuanceModule;
    wrapModule = _wrapModule;
  }

  /* ============ External Functions ============ */
  receive() external payable {
    // required for weth.withdraw() to work properly
    require(msg.sender == dexAdapter.weth, "FlashMint: DEPOSITS_NOT_ALLOWED");
  }

  /**
  * Withdraw slippage to selected address
  *
  * @param _tokens    Addresses of tokens to withdraw, specifiy ETH_ADDRESS to withdraw ETH
  * @param _to        Address to send the tokens to
  */
  function withdrawTokens(IERC20[] calldata _tokens, address payable _to) external onlyOwner payable {
      for(uint256 i = 0; i < _tokens.length; i++) {
          if(address(_tokens[i]) == DEXAdapter.ETH_ADDRESS){
              _to.sendValue(address(this).balance);
          }
          else{
              _tokens[i].safeTransfer(_to, _tokens[i].balanceOf(address(this)));
          }
      }
  }

  /**
   * Runs all the necessary approval functions required before issuing
   * or redeeming a SetToken. This function need to be called only once before the first time
   * this smart contract is used on any particular SetToken.
   *
   * @param _setToken          Address of the SetToken being initialized
   */
  function approveSetToken(ISetToken _setToken) external isSetToken(_setToken) {
    address[] memory _components = _setToken.getComponents();
    for (uint256 i = 0; i < _components.length; ++i) {
      DEXAdapter._safeApprove(IERC20(_components[i]), address(issuanceModule), MAX_UINT256);
    }
  }

  /**
   * Issues an exact amount of SetTokens for given amount of input ERC20 tokens.
   * The excess amount of input tokens is returned.
   * The sender must have approved the _maxAmountInputToken for input token to this contract.
   *
   * @param _setToken              Address of the SetToken to be issued
   * @param _inputToken            Address of the ERC20 input token
   * @param _amountSetToken        Amount of SetTokens to issue
   * @param _maxAmountInputToken   Maximum amount of input tokens to be used
   * @param _swapData              ComponentSwapData (inputToken -> component) for each set component in the same order
   * @param _wrapData              ComponentWrapData (underlyingERC20 -> wrapped component) for each required set token component in the exact same order
   *
   * @return totalInputTokenSold   Amount of input tokens spent for issuance
   */
  function issueExactSetFromERC20(
    ISetToken _setToken,
    IERC20 _inputToken,
    uint256 _amountSetToken,
    uint256 _maxAmountInputToken,
    ComponentSwapData[] calldata _swapData,
    ComponentWrapData[] calldata _wrapData
  ) external nonReentrant returns (uint256) {
    return
      _issueExactSet(
        _setToken,
        _inputToken,
        _amountSetToken,
        _maxAmountInputToken,
        _swapData,
        _wrapData,
        false
      );
  }

  /**
   * Issues an exact amount of SetTokens for given amount of ETH. Max amount of ETH used is the transferred amount in msg.value.
   * The excess amount of input ETH is returned.
   *
   * @param _setToken              Address of the SetToken to be issued
   * @param _amountSetToken        Amount of SetTokens to issue
   * @param _swapData              ComponentSwapData (WETH -> component) for each set component in the same order
   * @param _wrapData              ComponentWrapData (underlyingERC20 -> wrapped component) for each required set token component in the exact same order
   *
   * @return totalETHSold          Amount of ETH spent for issuance
   */
  function issueExactSetFromETH(
    ISetToken _setToken,
    uint256 _amountSetToken,
    ComponentSwapData[] calldata _swapData,
    ComponentWrapData[] calldata _wrapData
  ) external payable nonReentrant returns (uint256) {
    // input token for all operations is WETH (any sent in ETH will be wrapped)
    IERC20 inputToken = IERC20(dexAdapter.weth);
    uint256 maxAmountInputToken = msg.value; // = deposited amount ETH -> WETH

    return
      _issueExactSet(
        _setToken,
        inputToken,
        _amountSetToken,
        maxAmountInputToken,
        _swapData,
        _wrapData,
        true
      );
  }

  /**
   * Redeems an exact amount of SetTokens for an ERC20 token.
   * The sender must have approved the _amountSetToken of _setToken to this contract.
   *
   * @param _setToken              Address of the SetToken to be redeemed
   * @param _outputToken           Address of the ERC20 output token
   * @param _amountSetToken        Amount of SetTokens to redeem
   * @param _minOutputReceive      Minimum amount of output tokens to be received
   * @param _swapData              ComponentSwapData (underlyingERC20 -> output token) for each _redeemComponents in the same order
   * @param _unwrapData            ComponentWrapData (wrapped Set component -> underlyingERC20) for each required set token component in the exact same order
   *
   * @return outputAmount          Amount of output tokens sent to the caller
   */
  function redeemExactSetForERC20(
    ISetToken _setToken,
    IERC20 _outputToken,
    uint256 _amountSetToken,
    uint256 _minOutputReceive,
    ComponentSwapData[] calldata _swapData,
    ComponentWrapData[] calldata _unwrapData
  ) external nonReentrant returns (uint256) {
    return
      _redeemExactSet(
        _setToken,
        _outputToken,
        _amountSetToken,
        _minOutputReceive,
        _swapData,
        _unwrapData,
        false
      );
  }

  /**
   * Redeems an exact amount of SetTokens for ETH.
   * The sender must have approved the _amountSetToken of _setToken to this contract.
   *
   * @param _setToken              Address of the SetToken to be redemeed
   * @param _amountSetToken        Amount of SetTokens to redeem
   * @param _minOutputReceive      Minimum amount of output tokens to be received
   * @param _swapData              ComponentSwapData (underlyingERC20 -> output token) for each _redeemComponents in the same order
   * @param _unwrapData            ComponentWrapData (wrapped Set component -> underlyingERC20) for each required set token component in the exact same order
   *
   * @return outputAmount          Amount of ETH sent to the caller
   */
  function redeemExactSetForETH(
    ISetToken _setToken,
    uint256 _amountSetToken,
    uint256 _minOutputReceive,
    ComponentSwapData[] calldata _swapData,
    ComponentWrapData[] calldata _unwrapData
  ) external nonReentrant returns (uint256) {
    // output token for all operations is WETH (it will be unwrapped in the end and sent as ETH)
    IERC20 outputToken = IERC20(dexAdapter.weth);

    return
      _redeemExactSet(
        _setToken,
        outputToken,
        _amountSetToken,
        _minOutputReceive,
        _swapData,
        _unwrapData,
        true
      );
  }

  /**
  * ESTIMATES the amount of output ERC20 tokens required to issue an exact amount of SetTokens based on component swap data.
  * Simulates swapping input to all components in swap data. 
  * This function is not marked view, but should be static called off-chain.
  *
  * @param _setToken              Address of the SetToken being issued
  * @param _inputToken            Address of the input token used to pay for issuance
  * @param _setAmount             Amount of SetTokens to issue
  * @param _swapData              ComponentSwapData (inputToken -> component) for each set component in the same order
  *
  * @return amountInputNeeded     Amount of tokens needed to issue specified amount of SetTokens
  */
  function getIssueExactSet(
      ISetToken _setToken,
      address _inputToken,
      uint256 _setAmount,
      ComponentSwapData[] calldata _swapData
  )
      external
      isSetToken(_setToken)
      returns(uint256 amountInputNeeded)
  {
      require(_setAmount > 0, "FlashMint: INVALID_INPUTS");
      require(_inputToken != address(0), "FlashMint: INVALID_INPUTS");

      for (uint256 i = 0; i < _swapData.length; ++i) {
        // if the input token is the swap target token, no swapping is needed

        if (_inputToken == _swapData[i].underlyingERC20) {
          amountInputNeeded = amountInputNeeded.add(_swapData[i].buyUnderlyingAmount);
          continue;
        }
        
        // add required input amount to swap to desired buyUnderlyingAmount
        uint256 amountInNeeded = dexAdapter.getAmountIn(_swapData[i].dexData, _swapData[i].buyUnderlyingAmount);
        amountInputNeeded = amountInputNeeded.add(amountInNeeded);
      }

  }

  /**
  * ESTIMATES the amount of output ERC20 tokens received when redeeming an exact amount of SetTokens based on component swap data.
  * Simulates swapping all components to the output token in swap data. 
  * This function is not marked view, but should be static called off-chain.
  *
  * Note that _swapData.buyUnderlyingAmount has to be specified here with the expected underlying amount received after unwrapping
  *
  * @param _setToken              Address of the SetToken being redeemed
  * @param _outputToken           Address of the output token expected to teceive (if redeeming to ETH, outputToken here is WETH)
  * @param _setAmount             Amount of SetTokens to redeem
  * @param _swapData              ComponentSwapData (component -> outputToken) for each set component in the same order
  *
  * @return amountOutputReceived     Amount of output tokens received
  */
  function getRedeemExactSet(
      ISetToken _setToken,
      address _outputToken,
      uint256 _setAmount,
      ComponentSwapData[] calldata _swapData
  )
      external
      isSetToken(_setToken)
      returns(uint256 amountOutputReceived)
  {
      require(_setAmount > 0, "FlashMint: INVALID_INPUTS");
      require(_outputToken != address(0), "FlashMint: INVALID_INPUTS");

      for (uint256 i = 0; i < _swapData.length; ++i) {
        // if the output token is the swap target token, no swapping is needed

        if (_outputToken == _swapData[i].underlyingERC20) {
          amountOutputReceived = amountOutputReceived.add(_swapData[i].buyUnderlyingAmount);
          continue;
        }

        // add received output amount from swap
        uint256 swapAmountOut = dexAdapter.getAmountOut(_swapData[i].dexData, _swapData[i].buyUnderlyingAmount);
        amountOutputReceived = amountOutputReceived.add(swapAmountOut);
      }

  }

  /* ============ Internal Functions ============ */

  /**
   * Issues an exact amount of SetTokens for given amount of input. Excess amounts are returned
   *
   * @param _setToken                   Address of the SetToken to be issued
   * @param _inputToken                 Address of the ERC20 input token
   * @param _amountSetToken             Amount of SetTokens to issue
   * @param _maxAmountInputToken        Maximum amount of input tokens to be used
   * @param _swapData                   ComponentSwapData (input token -> underlyingERC20) for each _requiredComponents in the same order
   * @param _wrapData                   ComponentWrapData (underlyingERC20 -> wrapped component) for each required set token component in the exact same order
   * @param _issueFromETH               boolean flag to identify if issuing from ETH or from ERC20 tokens
   *
   * @return totalInputSold             Amount of input token spent for issuance
   */
  function _issueExactSet(
    ISetToken _setToken,
    IERC20 _inputToken,
    uint256 _amountSetToken,
    uint256 _maxAmountInputToken,
    ComponentSwapData[] calldata _swapData,
    ComponentWrapData[] calldata _wrapData,
    bool _issueFromETH
  ) internal returns (uint256) {
    // 1. validate input params, get required components with amounts and snapshot input token balance before
    require(address(_inputToken) != address(0), "FlashMint: INVALID_INPUTS");
    uint256 inputTokenBalanceBefore = IERC20(_inputToken).balanceOf(address(this));
    
    // Prevent stack too deep
    {
      (
        address[] memory requiredComponents,
        uint256[] memory requiredAmounts
      ) = _validateIssueParams(
          _setToken,
          _amountSetToken,
          _maxAmountInputToken,
          _swapData,
          _wrapData
        );

      // 2. transfer input to this contract
      if (_issueFromETH) {
        // wrap sent in ETH to WETH for all operations
        IWETH(dexAdapter.weth).deposit{value: msg.value}();
      } else {
        _inputToken.safeTransferFrom(msg.sender, address(this), _maxAmountInputToken);
      }

      // 3. swap input token to all components, then wrap them if needed
      _swapAndWrapComponents(
        _inputToken,
        _maxAmountInputToken,
        _swapData,
        _wrapData,
        requiredComponents,
        requiredAmounts
      );
    }

    // 4. issue set tokens
    issuanceModule.issue(_setToken, _amountSetToken, msg.sender);

    // 5. ensure not too much of input token was spent (covers case where initial input token balance was > 0)
    uint256 spentInputTokenAmount = _validateMaxAmountInputToken(
      _inputToken,
      inputTokenBalanceBefore,
      _maxAmountInputToken
    );

    // 6. return excess inputs
    _returnExcessInput(_inputToken, _maxAmountInputToken, spentInputTokenAmount, _issueFromETH);

    // 7. emit event and return amount spent
    emit FlashMint(
      msg.sender,
      _setToken,
      _issueFromETH ? IERC20(DEXAdapter.ETH_ADDRESS) : _inputToken,
      spentInputTokenAmount,
      _amountSetToken
    );

    return spentInputTokenAmount;
  }

  /**
   * Redeems an exact amount of SetTokens.
   *
   * @param _setToken              Address of the SetToken to be issued
   * @param _outputToken           Address of the ERC20 output token
   * @param _amountSetToken        Amount of SetTokens to redeem
   * @param _minOutputReceive      Minimum amount of output tokens to be received
   * @param _swapData              ComponentSwapData (underlyingERC20 -> output token) for each _redeemComponents in the same order
   * @param _unwrapData            ComponentWrapData (wrapped Set component -> underlyingERC20) for each _redeemComponents in the same order
   * @param _redeemToETH           boolean flag to identify if redeeming to ETH or to ERC20 tokens
   *
   * @return outputAmount          Amount of output received
   */
  function _redeemExactSet(
    ISetToken _setToken,
    IERC20 _outputToken,
    uint256 _amountSetToken,
    uint256 _minOutputReceive,
    ComponentSwapData[] calldata _swapData,
    ComponentWrapData[] calldata _unwrapData,
    bool _redeemToETH
  ) internal returns (uint256) {
    // 1. validate input params and get required components
    (address[] memory redeemComponents, uint256[] memory redeemAmounts) = _validateRedeemParams(
      _setToken,
      _outputToken,
      _amountSetToken,
      _swapData,
      _unwrapData
    );

    // 2. transfer set tokens to be redeemed to this
    _setToken.safeTransferFrom(msg.sender, address(this), _amountSetToken);

    // 3. redeem set tokens
    issuanceModule.redeem(_setToken, _amountSetToken, address(this));

    // 4. unwrap all components if needed and swap them to output token
    uint256 totalOutputTokenObtained = _unwrapAndSwapComponents(
      _outputToken,
      _swapData,
      _unwrapData,
      redeemComponents,
      redeemAmounts
    );

    // 5. ensure expected minimum output amount has been obtained
    require(totalOutputTokenObtained >= _minOutputReceive, "FlashMint: INSUFFICIENT_OUTPUT_AMOUNT");

    // 6. transfer obtained output tokens to msg.sender
    _sendObtainedOutputToSender(_outputToken, totalOutputTokenObtained, _redeemToETH);

    // 7. emit event and return amount obtained
    emit FlashRedeem(
      msg.sender,
      _setToken,
      _redeemToETH ? IERC20(DEXAdapter.ETH_ADDRESS) : _outputToken,
      _amountSetToken,
      totalOutputTokenObtained
    );

    return totalOutputTokenObtained;
  }

  /**
   * Validates input params for _issueExactSet operations
   *
   * @param _setToken                   Address of the SetToken to be redeemed
   * @param _amountSetToken             Amount of SetTokens to issue
   * @param _maxAmountToken             Maximum amount of input token to spend
   * @param _swapData                   ComponentSwapData (input token -> underlyingERC20) for each _requiredComponents in the same order
   * @param _wrapData                   ComponentWrapData (underlyingERC20 -> wrapped Set component) for each _requiredComponents in the same order
   *
   * @return requiredComponents         Array of required issuance components gotten from IDebtIssuanceModule.getRequiredComponentIssuanceUnits()
   * @return requiredAmounts            Array of required issuance component amounts gotten from IDebtIssuanceModule.getRequiredComponentIssuanceUnits()
   */
  function _validateIssueParams(
    ISetToken _setToken,
    uint256 _amountSetToken,
    uint256 _maxAmountToken,
    ComponentSwapData[] calldata _swapData,
    ComponentWrapData[] calldata _wrapData
  )
    internal
    view
    isSetToken(_setToken)
    returns (address[] memory requiredComponents, uint256[] memory requiredAmounts)
  {
    require(_amountSetToken > 0 && _maxAmountToken > 0, "FlashMint: INVALID_INPUTS");

    (requiredComponents, requiredAmounts, ) = issuanceModule.getRequiredComponentIssuanceUnits(
      _setToken,
      _amountSetToken
    );

    require(
      _wrapData.length == _swapData.length && _wrapData.length == requiredComponents.length,
      "FlashMint: MISMATCH_INPUT_ARRAYS"
    );
  }

  /**
   * Validates input params for _redeemExactSet operations
   *
   * @param _setToken                  Address of the SetToken to be redeemed
   * @param _outputToken               Output token that will be redeemed to
   * @param _amountSetToken            Amount of SetTokens to redeem
   * @param _swapData                  ComponentSwapData (underlyingERC20 -> output token) for each _redeemComponents in the same order
   * @param _unwrapData                ComponentWrapData (wrapped Set component -> underlyingERC20) for each _redeemComponents in the same order
   *
   * @return redeemComponents          Array of redemption components gotten from IDebtIssuanceModule.getRequiredComponentRedemptionUnits()
   * @return redeemAmounts             Array of redemption component amounts gotten from IDebtIssuanceModule.getRequiredComponentRedemptionUnits()
   */
  function _validateRedeemParams(
    ISetToken _setToken,
    IERC20 _outputToken,
    uint256 _amountSetToken,
    ComponentSwapData[] calldata _swapData,
    ComponentWrapData[] calldata _unwrapData
  )
    internal
    view
    isSetToken(_setToken)
    returns (address[] memory redeemComponents, uint256[] memory redeemAmounts)
  {
    require(
      _amountSetToken > 0 && address(_outputToken) != address(0),
      "FlashMint: INVALID_INPUTS"
    );

    (redeemComponents, redeemAmounts, ) = issuanceModule.getRequiredComponentRedemptionUnits(
      _setToken,
      _amountSetToken
    );

    require(
      _unwrapData.length == _swapData.length && _unwrapData.length == redeemComponents.length,
      "FlashMint: MISMATCH_INPUT_ARRAYS"
    );
  }

  /**
   * Swaps and then wraps each _requiredComponents sequentially based on _swapData and _wrapData
   *
   * @param _inputToken                 Input token that will be sold
   * @param _maxAmountInputToken        Maximum amount of input token that can be spent
   * @param _swapData                   ComponentSwapData (input token -> underlyingERC20) for each _requiredComponents in the same order
   * @param _wrapData                   ComponentWrapData (underlyingERC20 -> wrapped Set component) for each _requiredComponents in the same order
   * @param _requiredComponents         Issuance components gotten from IDebtIssuanceModule.getRequiredComponentIssuanceUnits()
   * @param _requiredAmounts            Issuance units gotten from IDebtIssuanceModule.getRequiredComponentIssuanceUnits()
   */
  function _swapAndWrapComponents(
    IERC20 _inputToken,
    uint256 _maxAmountInputToken,
    ComponentSwapData[] calldata _swapData,
    ComponentWrapData[] calldata _wrapData,
    address[] memory _requiredComponents,
    uint256[] memory _requiredAmounts
  ) internal {
    // if the required set components contain the input token, we have to make sure that the required amount
    // for issuance is actually still left over at the end of swapping and wrapping
    uint256 requiredLeftOverInputTokenAmount = 0;

    // for each component in the swapData / wrapData / requiredComponents array:
    // 1. swap from input token to unwrapped component (exact to buyUnderlyingAmount)
    // 2. wrap from unwrapped component to wrapped component (unless unwrapped component == wrapped component)
    // 3. ensure amount in contract covers required amount for issuance
    for (uint256 i = 0; i < _requiredComponents.length; ++i) {
      // if the required set component is the input token, no swapping or wrapping is needed
      uint256 requiredAmount = _requiredAmounts[i];
      if (address(_inputToken) == _requiredComponents[i]) {
        requiredLeftOverInputTokenAmount = requiredAmount;
        continue;
      }

      // snapshot balance of required component before swap and wrap operations
      uint256 componentBalanceBefore = IERC20(_requiredComponents[i]).balanceOf(address(this));

      // swap input token to underlying token
      _swapToExact(
        _inputToken, // input
        IERC20(_swapData[i].underlyingERC20), // output
        _swapData[i].buyUnderlyingAmount, // buy amount: must come from flash mint caller, we do not know the exchange rate wrapped <> unwrapped
        _maxAmountInputToken, // maximum spend amount: _maxAmountInputToken as transferred by the flash mint caller
        _swapData[i].dexData // dex path fees data etc.
      );

      // transform underlying token into wrapped version (unless it's the same)
      if (_swapData[i].underlyingERC20 != _requiredComponents[i]) {
        _wrapComponent(
          _wrapData[i],
          _swapData[i].buyUnderlyingAmount,
          _swapData[i].underlyingERC20,
          _requiredComponents[i]
        );
      }

      // ensure obtained component amount covers required component amount for issuance
      // this is not already covered through _swapToExact because it does not take wrapping into consideration
      uint256 componentBalanceAfter = IERC20(_requiredComponents[i]).balanceOf(address(this));
      uint256 componentAmountObtained = componentBalanceAfter.sub(componentBalanceBefore);
      require(componentAmountObtained >= requiredAmount, "FlashMint: UNDERBOUGHT_COMPONENT");
    }

    // ensure left over input token amount covers issuance for component if input token is one of the Set components
    require(
      IERC20(_inputToken).balanceOf(address(this)) >= requiredLeftOverInputTokenAmount,
      "FlashMint: NOT_ENOUGH_INPUT"
    );
  }

  /**
   * Unwraps and then swaps each _redeemComponents sequentially based on _swapData and _unwrapData
   *
   * @param _outputToken                Output token that will be bought
   * @param _swapData                   ComponentSwapData (underlyingERC20 -> output token) for each _redeemComponents in the same order
   * @param _unwrapData                 ComponentWrapData (wrapped Set component -> underlyingERC20) for each _redeemComponents in the same order
   * @param _redeemComponents           redemption components gotten from IDebtIssuanceModule.getRequiredComponentRedemptionUnits()
   * @param _redeemAmounts              redemption units gotten from IDebtIssuanceModule.getRequiredComponentRedemptionUnits()
   *
   * @return totalOutputTokenObtained   total output token amount obtained
   */
  function _unwrapAndSwapComponents(
    IERC20 _outputToken,
    ComponentSwapData[] calldata _swapData,
    ComponentWrapData[] calldata _unwrapData,
    address[] memory _redeemComponents,
    uint256[] memory _redeemAmounts
  ) internal returns (uint256 totalOutputTokenObtained) {
    // for each component in the swapData / wrapData / redeemComponents array:
    // 1. unwrap from wrapped set component to unwrapped underlyingERC20 in swapData
    // 2. swap from underlyingERC20 token to output token (exact from obtained underlyingERC20 amount)

    for (uint256 i = 0; i < _redeemComponents.length; ++i) {
      // default redeemed amount is maximum possible amount that was redeemed for this component
      // this is recomputed if the redeemed amount is unwrapped to the actual unwrapped amount
      uint256 redeemedAmount = _redeemAmounts[i];

      // if the set component is the output token, no swapping or wrapping is needed
      if (address(_outputToken) == _redeemComponents[i]) {
        // add maximum possible amount that was redeemed for this component to totalOutputTokenObtained (=redeemedAmount)
        totalOutputTokenObtained = totalOutputTokenObtained.add(redeemedAmount);
        continue;
      }

      // transform wrapped token into unwrapped version (unless it's the same)
      if (_swapData[i].underlyingERC20 != _redeemComponents[i]) {
        // snapshot unwrapped balance before to compute the actual redeemed amount of underlying token (due to unknown exchange rate)
        uint256 unwrappedBalanceBefore = IERC20(_swapData[i].underlyingERC20).balanceOf(
          address(this)
        );

        _unwrapComponent(
          _unwrapData[i],
          redeemedAmount,
          _swapData[i].underlyingERC20,
          _redeemComponents[i]
        );

        // recompute actual redeemed amount to the underlyingERC20 token amount obtained through unwrapping
        uint256 unwrappedBalanceAfter = IERC20(_swapData[i].underlyingERC20).balanceOf(
          address(this)
        );
        redeemedAmount = unwrappedBalanceAfter.sub(unwrappedBalanceBefore);
      }

      // swap redeemed and unwrapped component to output token
      uint256 boughtOutputTokenAmount = _swapFromExact(
        IERC20(_swapData[i].underlyingERC20), // input
        _outputToken, // output
        redeemedAmount, // sell amount of input token
        _swapData[i].dexData // dex path fees data etc.
      );

      totalOutputTokenObtained = totalOutputTokenObtained.add(boughtOutputTokenAmount);
    }
  }

  /**
   * Swaps _inputToken to exact _amount to _outputToken through _swapDexData
   *
   * @param _inputToken           Input token that will be sold
   * @param _outputToken          Output token that will be bought
   * @param _amount               Amount that will be bought
   * @param _maxAmountIn          Maximum aount of input token that can be spent
   * @param _swapDexData          DEXAdapter.SwapData with path, fees, etc. for inputToken -> outputToken swap
   *
   * @return Amount of spent _inputToken
   */
  function _swapToExact(
    IERC20 _inputToken,
    IERC20 _outputToken,
    uint256 _amount,
    uint256 _maxAmountIn,
    DEXAdapter.SwapData calldata _swapDexData
  )
    internal
    isValidPath(_swapDexData.path, address(_inputToken), address(_outputToken))
    returns (uint256)
  {
    // safe approves are done right in the dexAdapter library
    // swaps are skipped there too if inputToken == outputToken (depending on path)
    return dexAdapter.swapTokensForExactTokens(_amount, _maxAmountIn, _swapDexData);
  }

  /**
   * Swaps exact _amount of _inputToken to _outputToken through _swapDexData
   *
   * @param _inputToken           Input token that will be sold
   * @param _outputToken          Output token that will be bought
   * @param _amount               Amount that will be sold
   * @param _swapDexData          DEXAdapter.SwapData with path, fees, etc. for inputToken -> outputToken swap
   *
   * @return amount of received _outputToken
   */
  function _swapFromExact(
    IERC20 _inputToken,
    IERC20 _outputToken,
    uint256 _amount,
    DEXAdapter.SwapData calldata _swapDexData
  )
    internal
    isValidPath(_swapDexData.path, address(_inputToken), address(_outputToken))
    returns (uint256)
  {
    // safe approves are done right in the dexAdapter library
    return
      dexAdapter.swapExactTokensForTokens(
        _amount,
        // _minAmountOut is 0 here since we don't know what to check against because for wrapped components
        // we only have the required amounts for the wrapped component, but not for the underlying we swap to here
        // This is covered indirectly in later checks though
        // e.g. directly through the issue call (not enough _outputToken -> wrappedComponent -> issue will fail)
        0,
        _swapDexData
      );
  }

  /**
   * Wraps _wrapAmount of _underlyingToken to _wrappedComponent component
   *
   * @param _wrapData                   ComponentWrapData including integration name and optional wrap calldata bytes
   * @param _wrapAmount                 amount of _underlyingToken to wrap
   * @param _underlyingToken            underlying (unwrapped) token to wrap from (e.g. DAI)
   * @param _wrappedToken               wrapped token to wrap to
   */
  function _wrapComponent(
    ComponentWrapData calldata _wrapData,
    uint256 _wrapAmount,
    address _underlyingToken,
    address _wrappedToken
  ) internal {
    // 1. get the wrap adapter directly from the integration registry

    // Note we could get the address of the adapter directly in the params instead of the integration name 
    // but that would allow integrators to use their own potentially somehow malicious WrapAdapter
    // by directly fetching it from our IntegrationRegistry we can be sure that it behaves as expected
    IWrapV2Adapter _wrapAdapter = IWrapV2Adapter(_getAndValidateAdapter(_wrapData.integrationName));

    // 2. get wrap call info from adapter
    (address _wrapCallTarget, uint256 _wrapCallValue, bytes memory _wrapCallData) = _wrapAdapter
      .getWrapCallData(
        _underlyingToken,
        _wrappedToken,
        _wrapAmount,
        address(this),
        _wrapData.wrapData
      );

    // 3. approve token transfer from this to _wrapCallTarget
    DEXAdapter._safeApprove(
      IERC20(_underlyingToken),
      _wrapCallTarget,
      _wrapAmount
    );

    // 4. invoke wrap function call. we can't check any response value because the implementation might be different 
    // between wrapCallTargets... e.g. compoundV2 would return uint256 with value 0 if successful
    _wrapCallTarget.functionCallWithValue(_wrapCallData, _wrapCallValue);
  }

  /**
   * Unwraps _unwrapAmount of _wrappedToken to _underlyingToken
   *
   * @param _unwrapData                 ComponentWrapData including integration name and optional wrap calldata bytes
   * @param _unwrapAmount                 amount of _underlyingToken to wrap
   * @param _underlyingToken            underlying (unwrapped) token to unwrap to (e.g. DAI)
   * @param _wrappedToken               wrapped token to unwrap from
   */
  function _unwrapComponent(
    ComponentWrapData calldata _unwrapData,
    uint256 _unwrapAmount,
    address _underlyingToken,
    address _wrappedToken
  ) internal {
    // 1. get the wrap adapter directly from the integration registry

    // Note we could get the address of the adapter directly in the params instead of the integration name 
    // but that would allow integrators to use their own potentially somehow malicious WrapAdapter
    // by directly fetching it from our IntegrationRegistry we can be sure that it behaves as expected
    IWrapV2Adapter _wrapAdapter = IWrapV2Adapter(_getAndValidateAdapter(_unwrapData.integrationName));

    // 2. get unwrap call info from adapter
    (address _wrapCallTarget, uint256 _wrapCallValue, bytes memory _wrapCallData) = _wrapAdapter
      .getUnwrapCallData(
        _underlyingToken,
        _wrappedToken,
        _unwrapAmount,
        address(this),
        _unwrapData.wrapData
      );

    // 3. invoke unwrap function call. we can't check any response value because the implementation might be different 
    // between wrapCallTargets... e.g. compoundV2 would return uint256 with value 0 if successful
    _wrapCallTarget.functionCallWithValue(_wrapCallData, _wrapCallValue);
  }

  /**
   * Validates that not more than the requested max amount of the input token has been spent
   *
   * @param _inputToken                 Address of the input token to return
   * @param _inputTokenBalanceBefore    input token balance before at the beginning of the operation
   * @param _maxAmountInputToken        maximum amount that could be spent

   * @return spentInputTokenAmount      actual spent amount of the input token
   */
  function _validateMaxAmountInputToken(
    IERC20 _inputToken,
    uint256 _inputTokenBalanceBefore,
    uint256 _maxAmountInputToken
  ) internal view returns (uint256 spentInputTokenAmount) {
    uint256 inputTokenBalanceAfter = _inputToken.balanceOf(address(this));

    // _maxAmountInputToken amount has been transferred to this contract after _inputTokenBalanceBefore snapshot
    spentInputTokenAmount = _inputTokenBalanceBefore.add(_maxAmountInputToken).sub(
      inputTokenBalanceAfter
    );

    require(spentInputTokenAmount <= _maxAmountInputToken, "FlashMint: OVERSPENT_INPUT_TOKEN");
  }

  /**
   * Returns excess input token
   *
   * @param _inputToken         Address of the input token to return
   * @param _receivedAmount     Amount received by the caller
   * @param _spentAmount        Amount spent for issuance
   * @param _returnETH          Boolean flag to identify if ETH should be returned or the input token
   */
  function _returnExcessInput(
    IERC20 _inputToken,
    uint256 _receivedAmount,
    uint256 _spentAmount,
    bool _returnETH
  ) internal {
    uint256 amountTokenReturn = _receivedAmount.sub(_spentAmount);
    if (amountTokenReturn > 0) {
      if (_returnETH) {
        // unwrap from WETH -> ETH and send ETH amount back to sender
        IWETH(dexAdapter.weth).withdraw(amountTokenReturn);
        (payable(msg.sender)).sendValue(amountTokenReturn);
      } else {
        _inputToken.safeTransfer(msg.sender, amountTokenReturn);
      }
    }
  }

  /**
   * Sends the obtained amount of output token / ETH to msg.sender
   *
   * @param _outputToken         Address of the output token to return
   * @param _amount              Amount to transfer
   * @param _redeemToETH         Boolean flag to identify if ETH or the output token should be sent
   */
  function _sendObtainedOutputToSender(
    IERC20 _outputToken,
    uint256 _amount,
    bool _redeemToETH
  ) internal {
    if (_redeemToETH) {
      // unwrap from WETH -> ETH and send ETH amount back to sender
      IWETH(dexAdapter.weth).withdraw(_amount);
      (payable(msg.sender)).sendValue(_amount);
    } else {
      _outputToken.safeTransfer(msg.sender, _amount);
    }
  }

  /**
   * Gets the integration for the passed in integration name listed on the wrapModule. Validates that the address is not empty
   *
   * @param _integrationName      Name of wrap adapter integration (mapping on integration registry)
   *
   * @return adapter              address of the wrap adapter
   */
  function _getAndValidateAdapter(string memory _integrationName)
    internal
    view
    returns (address adapter)
  {
    // integration registry has resourceId 0, see library ResourceIdentifier
    // @dev could also be accomplished with using ResourceIdentifier for IController but this results in less bloat in the repo
    IIntegrationRegistry integrationRegistry = IIntegrationRegistry(setController.resourceId(0));

    adapter = integrationRegistry.getIntegrationAdapterWithHash(
      wrapModule,
      keccak256(bytes(_integrationName))
    );

    require(adapter != address(0), "FlashMint: WRAP_ADAPTER_INVALID");
  }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Math } from "@openzeppelin/contracts/math/Math.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/SafeCast.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

import { BaseExtension } from "../lib/BaseExtension.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";
import { IChainlinkAggregatorV3 } from "../interfaces/IChainlinkAggregatorV3.sol";
import { ILeverageModule } from "../interfaces/ILeverageModule.sol";
import { IProtocolDataProvider } from "../interfaces/IProtocolDataProvider.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { StringArrayUtils } from "../lib/StringArrayUtils.sol";


/**
 * @title AaveLeverageStrategyExtension
 * @author Set Protocol
 *
 * Smart contract that enables trustless leverage tokens. This extension is paired with the AaveLeverageModule from Set protocol where module 
 * interactions are invoked via the IBaseManager contract. Any leveraged token can be constructed as long as the collateral and borrow asset 
 * is available on Aave. This extension contract also allows the operator to set an ETH reward to incentivize keepers calling the rebalance
 * function at different leverage thresholds.
 *
 */
contract AaveLeverageStrategyExtension is BaseExtension {
    using Address for address;
    using PreciseUnitMath for uint256;
    using SafeMath for uint256;
    using SafeCast for int256;
    using StringArrayUtils for string[];

    /* ============ Enums ============ */

    enum ShouldRebalance {
        NONE,                   // Indicates no rebalance action can be taken
        REBALANCE,              // Indicates rebalance() function can be successfully called
        ITERATE_REBALANCE,      // Indicates iterateRebalance() function can be successfully called
        RIPCORD                 // Indicates ripcord() function can be successfully called
    }

    /* ============ Structs ============ */

    struct ActionInfo {
        uint256 collateralBalance;                      // Balance of underlying held in Aave in base units (e.g. USDC 10e6)
        uint256 borrowBalance;                          // Balance of underlying borrowed from Aave in base units
        uint256 collateralValue;                        // Valuation in USD adjusted for decimals in precise units (10e18)
        uint256 borrowValue;                            // Valuation in USD adjusted for decimals in precise units (10e18)
        uint256 collateralPrice;                        // Price of collateral in precise units (10e18) from Chainlink
        uint256 borrowPrice;                            // Price of borrow asset in precise units (10e18) from Chainlink
        uint256 setTotalSupply;                         // Total supply of SetToken
    }

     struct LeverageInfo {
        ActionInfo action;
        uint256 currentLeverageRatio;                   // Current leverage ratio of Set
        uint256 slippageTolerance;                      // Allowable percent trade slippage in preciseUnits (1% = 10^16)
        uint256 twapMaxTradeSize;                       // Max trade size in collateral units allowed for rebalance action
        string exchangeName;                            // Exchange to use for trade
    }

    struct ContractSettings {
        ISetToken setToken;                             // Instance of leverage token
        ILeverageModule leverageModule;                 // Instance of Aave leverage module
        IProtocolDataProvider aaveProtocolDataProvider; // Instance of Aave protocol data provider
        IChainlinkAggregatorV3 collateralPriceOracle;   // Chainlink oracle feed that returns prices in 8 decimals for collateral asset
        IChainlinkAggregatorV3 borrowPriceOracle;       // Chainlink oracle feed that returns prices in 8 decimals for borrow asset
        IERC20 targetCollateralAToken;                  // Instance of target collateral aToken asset
        IERC20 targetBorrowDebtToken;                   // Instance of target borrow variable debt token asset
        address collateralAsset;                        // Address of underlying collateral
        address borrowAsset;                            // Address of underlying borrow asset
        uint256 collateralDecimalAdjustment;            // Decimal adjustment for chainlink oracle of the collateral asset. Equal to 28-collateralDecimals (10^18 * 10^18 / 10^decimals / 10^8)
        uint256 borrowDecimalAdjustment;                // Decimal adjustment for chainlink oracle of the borrowing asset. Equal to 28-borrowDecimals (10^18 * 10^18 / 10^decimals / 10^8)
    }

    struct MethodologySettings {
        uint256 targetLeverageRatio;                     // Long term target ratio in precise units (10e18)
        uint256 minLeverageRatio;                        // In precise units (10e18). If current leverage is below, rebalance target is this ratio
        uint256 maxLeverageRatio;                        // In precise units (10e18). If current leverage is above, rebalance target is this ratio
        uint256 recenteringSpeed;                        // % at which to rebalance back to target leverage in precise units (10e18)
        uint256 rebalanceInterval;                       // Period of time required since last rebalance timestamp in seconds
    }

    struct ExecutionSettings {
        uint256 unutilizedLeveragePercentage;            // Percent of max borrow left unutilized in precise units (1% = 10e16)
        uint256 slippageTolerance;                       // % in precise units to price min token receive amount from trade quantities
        uint256 twapCooldownPeriod;                      // Cooldown period required since last trade timestamp in seconds
    }

    struct ExchangeSettings {
        uint256 twapMaxTradeSize;                        // Max trade size in collateral base units
        uint256 exchangeLastTradeTimestamp;              // Timestamp of last trade made with this exchange
        uint256 incentivizedTwapMaxTradeSize;            // Max trade size for incentivized rebalances in collateral base units
        bytes leverExchangeData;                         // Arbitrary exchange data passed into rebalance function for levering up
        bytes deleverExchangeData;                       // Arbitrary exchange data passed into rebalance function for delevering
    }

    struct IncentiveSettings {
        uint256 etherReward;                             // ETH reward for incentivized rebalances
        uint256 incentivizedLeverageRatio;               // Leverage ratio for incentivized rebalances
        uint256 incentivizedSlippageTolerance;           // Slippage tolerance percentage for incentivized rebalances
        uint256 incentivizedTwapCooldownPeriod;          // TWAP cooldown in seconds for incentivized rebalances
    }

    /* ============ Events ============ */

    event Engaged(uint256 _currentLeverageRatio, uint256 _newLeverageRatio, uint256 _chunkRebalanceNotional, uint256 _totalRebalanceNotional);
    event Rebalanced(
        uint256 _currentLeverageRatio,
        uint256 _newLeverageRatio,
        uint256 _chunkRebalanceNotional,
        uint256 _totalRebalanceNotional
    );
    event RebalanceIterated(
        uint256 _currentLeverageRatio,
        uint256 _newLeverageRatio,
        uint256 _chunkRebalanceNotional,
        uint256 _totalRebalanceNotional
    );
    event RipcordCalled(
        uint256 _currentLeverageRatio,
        uint256 _newLeverageRatio,
        uint256 _rebalanceNotional,
        uint256 _etherIncentive
    );
    event Disengaged(uint256 _currentLeverageRatio, uint256 _newLeverageRatio, uint256 _chunkRebalanceNotional, uint256 _totalRebalanceNotional);
    event MethodologySettingsUpdated(
        uint256 _targetLeverageRatio,
        uint256 _minLeverageRatio,
        uint256 _maxLeverageRatio,
        uint256 _recenteringSpeed,
        uint256 _rebalanceInterval
    );
    event ExecutionSettingsUpdated(
        uint256 _unutilizedLeveragePercentage,
        uint256 _twapCooldownPeriod,
        uint256 _slippageTolerance
    );
    event IncentiveSettingsUpdated(
        uint256 _etherReward,
        uint256 _incentivizedLeverageRatio,
        uint256 _incentivizedSlippageTolerance,
        uint256 _incentivizedTwapCooldownPeriod
    );
    event ExchangeUpdated(
        string _exchangeName,
        uint256 twapMaxTradeSize,
        uint256 exchangeLastTradeTimestamp,
        uint256 incentivizedTwapMaxTradeSize,
        bytes leverExchangeData,
        bytes deleverExchangeData
    );
    event ExchangeAdded(
        string _exchangeName,
        uint256 twapMaxTradeSize,
        uint256 exchangeLastTradeTimestamp,
        uint256 incentivizedTwapMaxTradeSize,
        bytes leverExchangeData,
        bytes deleverExchangeData
    );
    event ExchangeRemoved(
        string _exchangeName
    );

    /* ============ Modifiers ============ */

    /**
     * Throws if rebalance is currently in TWAP`
     */
    modifier noRebalanceInProgress() {
        require(twapLeverageRatio == 0, "Rebalance is currently in progress");
        _;
    }

    /* ============ State Variables ============ */

    ContractSettings internal strategy;                             // Struct of contracts used in the strategy (SetToken, price oracles, leverage module etc)
    MethodologySettings internal methodology;                       // Struct containing methodology parameters
    ExecutionSettings internal execution;                           // Struct containing execution parameters
    mapping(string => ExchangeSettings) internal exchangeSettings;  // Mapping from exchange name to exchange settings
    IncentiveSettings internal incentive;                           // Struct containing incentive parameters for ripcord
    string[] public enabledExchanges;                               // Array containing enabled exchanges
    uint256 public twapLeverageRatio;                               // Stored leverage ratio to keep track of target between TWAP rebalances
    uint256 public globalLastTradeTimestamp;                        // Last rebalance timestamp. Current timestamp must be greater than this variable + rebalance interval to rebalance

    /* ============ Constructor ============ */

    /**
     * Instantiate addresses, methodology parameters, execution parameters, and incentive parameters.
     *
     * @param _manager                  Address of IBaseManager contract
     * @param _strategy                 Struct of contract addresses
     * @param _methodology              Struct containing methodology parameters
     * @param _execution                Struct containing execution parameters
     * @param _incentive                Struct containing incentive parameters for ripcord
     * @param _exchangeNames            List of initial exchange names
     * @param _exchangeSettings         List of structs containing exchange parameters for the initial exchanges
     */
    constructor(
        IBaseManager _manager,
        ContractSettings memory _strategy,
        MethodologySettings memory _methodology,
        ExecutionSettings memory _execution,
        IncentiveSettings memory _incentive,
        string[] memory _exchangeNames,
        ExchangeSettings[] memory _exchangeSettings
    )
        public
        BaseExtension(_manager)
    {
        strategy = _strategy;
        methodology = _methodology;
        execution = _execution;
        incentive = _incentive;

        for (uint256 i = 0; i < _exchangeNames.length; i++) {
            _validateExchangeSettings(_exchangeSettings[i]);
            exchangeSettings[_exchangeNames[i]] = _exchangeSettings[i];
            enabledExchanges.push(_exchangeNames[i]);
        }

        _validateNonExchangeSettings(methodology, execution, incentive);
    }

    /* ============ External Functions ============ */

    /**
     * OPERATOR ONLY: Engage to target leverage ratio for the first time. SetToken will borrow debt position from Aave and trade for collateral asset. If target
     * leverage ratio is above max borrow or max trade size, then TWAP is kicked off. To complete engage if TWAP, any valid caller must call iterateRebalance until target
     * is met.
     *
     * @param _exchangeName     the exchange used for trading
     */
    function engage(string memory _exchangeName) external onlyOperator {
        ActionInfo memory engageInfo = _createActionInfo();

        require(engageInfo.setTotalSupply > 0, "SetToken must have > 0 supply");
        require(engageInfo.collateralBalance > 0, "Collateral balance must be > 0");
        require(engageInfo.borrowBalance == 0, "Debt must be 0");

        LeverageInfo memory leverageInfo = LeverageInfo({
            action: engageInfo,
            currentLeverageRatio: PreciseUnitMath.preciseUnit(), // 1x leverage in precise units
            slippageTolerance: execution.slippageTolerance,
            twapMaxTradeSize: exchangeSettings[_exchangeName].twapMaxTradeSize,
            exchangeName: _exchangeName
        });

        // Calculate total rebalance units and kick off TWAP if above max borrow or max trade size
        (
            uint256 chunkRebalanceNotional,
            uint256 totalRebalanceNotional
        ) = _calculateChunkRebalanceNotional(leverageInfo, methodology.targetLeverageRatio, true);

        _lever(leverageInfo, chunkRebalanceNotional);

        _updateRebalanceState(
            chunkRebalanceNotional,
            totalRebalanceNotional,
            methodology.targetLeverageRatio,
            _exchangeName
        );

        emit Engaged(
            leverageInfo.currentLeverageRatio,
            methodology.targetLeverageRatio,
            chunkRebalanceNotional,
            totalRebalanceNotional
        );
    }

    /**
     * ONLY EOA AND ALLOWED CALLER: Rebalance product. If current leverage ratio is between the max and min bounds, then rebalance 
     * can only be called once the rebalance interval has elapsed since last timestamp. If outside the max and min, rebalance can be called anytime to bring leverage
     * ratio back to the max or min bounds. The methodology will determine whether to delever or lever.
     *
     * Note: If the calculated current leverage ratio is above the incentivized leverage ratio or in TWAP then rebalance cannot be called. Instead, you must call
     * ripcord() which is incentivized with a reward in Ether or iterateRebalance().
     *
     * @param _exchangeName     the exchange used for trading
     */
     function rebalance(string memory _exchangeName) external onlyEOA onlyAllowedCaller(msg.sender) {
        LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
            execution.slippageTolerance,
            exchangeSettings[_exchangeName].twapMaxTradeSize,
            _exchangeName
        );

        // use globalLastTradeTimestamps to prevent multiple rebalances being called with different exchanges during the epoch rebalance
        _validateNormalRebalance(leverageInfo, methodology.rebalanceInterval, globalLastTradeTimestamp);
        _validateNonTWAP();

        uint256 newLeverageRatio = _calculateNewLeverageRatio(leverageInfo.currentLeverageRatio);

        (
            uint256 chunkRebalanceNotional,
            uint256 totalRebalanceNotional
        ) = _handleRebalance(leverageInfo, newLeverageRatio);

        _updateRebalanceState(chunkRebalanceNotional, totalRebalanceNotional, newLeverageRatio, _exchangeName);

        emit Rebalanced(
            leverageInfo.currentLeverageRatio,
            newLeverageRatio,
            chunkRebalanceNotional,
            totalRebalanceNotional
        );
    }

    /**
     * ONLY EOA AND ALLOWED CALLER: Iterate a rebalance when in TWAP. TWAP cooldown period must have elapsed. If price moves advantageously, then exit without rebalancing
     * and clear TWAP state. This function can only be called when below incentivized leverage ratio and in TWAP state.
     *
     * @param _exchangeName     the exchange used for trading
     */
    function iterateRebalance(string memory _exchangeName) external onlyEOA onlyAllowedCaller(msg.sender) {
        LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
            execution.slippageTolerance,
            exchangeSettings[_exchangeName].twapMaxTradeSize,
            _exchangeName
        );

        // Use the exchangeLastTradeTimestamp since cooldown periods are measured on a per-exchange basis, allowing it to rebalance multiple time in quick
        // succession with different exchanges
        _validateNormalRebalance(leverageInfo, execution.twapCooldownPeriod, exchangeSettings[_exchangeName].exchangeLastTradeTimestamp);
        _validateTWAP();

        uint256 chunkRebalanceNotional;
        uint256 totalRebalanceNotional;
        if (!_isAdvantageousTWAP(leverageInfo.currentLeverageRatio)) {
            (chunkRebalanceNotional, totalRebalanceNotional) = _handleRebalance(leverageInfo, twapLeverageRatio);
        }

        // If not advantageous, then rebalance is skipped and chunk and total rebalance notional are both 0, which means TWAP state is
        // cleared
        _updateIterateState(chunkRebalanceNotional, totalRebalanceNotional, _exchangeName);

        emit RebalanceIterated(
            leverageInfo.currentLeverageRatio,
            twapLeverageRatio,
            chunkRebalanceNotional,
            totalRebalanceNotional
        );
    }

    /**
     * ONLY EOA: In case the current leverage ratio exceeds the incentivized leverage threshold, the ripcord function can be called by anyone to return leverage ratio
     * back to the max leverage ratio. This function typically would only be called during times of high downside volatility and / or normal keeper malfunctions. The caller
     * of ripcord() will receive a reward in Ether. The ripcord function uses it's own TWAP cooldown period, slippage tolerance and TWAP max trade size which are typically
     * looser than in regular rebalances.
     *
     * @param _exchangeName     the exchange used for trading
     */
    function ripcord(string memory _exchangeName) external onlyEOA {
        LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
            incentive.incentivizedSlippageTolerance,
            exchangeSettings[_exchangeName].incentivizedTwapMaxTradeSize,
            _exchangeName
        );

        // Use the exchangeLastTradeTimestamp so it can ripcord quickly with multiple exchanges
        _validateRipcord(leverageInfo, exchangeSettings[_exchangeName].exchangeLastTradeTimestamp);

        ( uint256 chunkRebalanceNotional, ) = _calculateChunkRebalanceNotional(leverageInfo, methodology.maxLeverageRatio, false);

        _delever(leverageInfo, chunkRebalanceNotional);

        _updateRipcordState(_exchangeName);

        uint256 etherTransferred = _transferEtherRewardToCaller(incentive.etherReward);

        emit RipcordCalled(
            leverageInfo.currentLeverageRatio,
            methodology.maxLeverageRatio,
            chunkRebalanceNotional,
            etherTransferred
        );
    }

    /**
     * OPERATOR ONLY: Return leverage ratio to 1x and delever to repay loan. This can be used for upgrading or shutting down the strategy. SetToken will redeem
     * collateral position and trade for debt position to repay Aave. If the chunk rebalance size is less than the total notional size, then this function will
     * delever and repay entire borrow balance on Aave. If chunk rebalance size is above max borrow or max trade size, then operator must
     * continue to call this function to complete repayment of loan. The function iterateRebalance will not work.
     *
     * Note: Delever to 0 will likely result in additional units of the borrow asset added as equity on the SetToken due to oracle price / market price mismatch
     *
     * @param _exchangeName     the exchange used for trading
     */
    function disengage(string memory _exchangeName) external onlyOperator {
        LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
            execution.slippageTolerance,
            exchangeSettings[_exchangeName].twapMaxTradeSize,
            _exchangeName
        );

        uint256 newLeverageRatio = PreciseUnitMath.preciseUnit();

        (
            uint256 chunkRebalanceNotional,
            uint256 totalRebalanceNotional
        ) = _calculateChunkRebalanceNotional(leverageInfo, newLeverageRatio, false);

        if (totalRebalanceNotional > chunkRebalanceNotional) {
            _delever(leverageInfo, chunkRebalanceNotional);
        } else {
            _deleverToZeroBorrowBalance(leverageInfo, totalRebalanceNotional);
        }

        emit Disengaged(
            leverageInfo.currentLeverageRatio,
            newLeverageRatio,
            chunkRebalanceNotional,
            totalRebalanceNotional
        );
    }

    /**
     * OPERATOR ONLY: Set methodology settings and check new settings are valid. Note: Need to pass in existing parameters if only changing a few settings. Must not be
     * in a rebalance.
     *
     * @param _newMethodologySettings          Struct containing methodology parameters
     */
    function setMethodologySettings(MethodologySettings memory _newMethodologySettings) external onlyOperator noRebalanceInProgress {
        methodology = _newMethodologySettings;

        _validateNonExchangeSettings(methodology, execution, incentive);

        emit MethodologySettingsUpdated(
            methodology.targetLeverageRatio,
            methodology.minLeverageRatio,
            methodology.maxLeverageRatio,
            methodology.recenteringSpeed,
            methodology.rebalanceInterval
        );
    }

    /**
     * OPERATOR ONLY: Set execution settings and check new settings are valid. Note: Need to pass in existing parameters if only changing a few settings. Must not be
     * in a rebalance.
     *
     * @param _newExecutionSettings          Struct containing execution parameters
     */
    function setExecutionSettings(ExecutionSettings memory _newExecutionSettings) external onlyOperator noRebalanceInProgress {
        execution = _newExecutionSettings;

        _validateNonExchangeSettings(methodology, execution, incentive);

        emit ExecutionSettingsUpdated(
            execution.unutilizedLeveragePercentage,
            execution.twapCooldownPeriod,
            execution.slippageTolerance
        );
    }

    /**
     * OPERATOR ONLY: Set incentive settings and check new settings are valid. Note: Need to pass in existing parameters if only changing a few settings. Must not be
     * in a rebalance.
     *
     * @param _newIncentiveSettings          Struct containing incentive parameters
     */
    function setIncentiveSettings(IncentiveSettings memory _newIncentiveSettings) external onlyOperator noRebalanceInProgress {
        incentive = _newIncentiveSettings;

        _validateNonExchangeSettings(methodology, execution, incentive);

        emit IncentiveSettingsUpdated(
            incentive.etherReward,
            incentive.incentivizedLeverageRatio,
            incentive.incentivizedSlippageTolerance,
            incentive.incentivizedTwapCooldownPeriod
        );
    }

    /**
     * OPERATOR ONLY: Add a new enabled exchange for trading during rebalances. New exchanges will have their exchangeLastTradeTimestamp set to 0. Adding
     * exchanges during rebalances is allowed, as it is not possible to enter an unexpected state while doing so.
     *
     * @param _exchangeName         Name of the exchange
     * @param _exchangeSettings     Struct containing exchange parameters
     */
    function addEnabledExchange(
        string memory _exchangeName,
        ExchangeSettings memory _exchangeSettings
    )
        external
        onlyOperator
    {
        require(exchangeSettings[_exchangeName].twapMaxTradeSize == 0, "Exchange already enabled");
        _validateExchangeSettings(_exchangeSettings);

        exchangeSettings[_exchangeName].twapMaxTradeSize = _exchangeSettings.twapMaxTradeSize;
        exchangeSettings[_exchangeName].incentivizedTwapMaxTradeSize = _exchangeSettings.incentivizedTwapMaxTradeSize;
        exchangeSettings[_exchangeName].leverExchangeData = _exchangeSettings.leverExchangeData;
        exchangeSettings[_exchangeName].deleverExchangeData = _exchangeSettings.deleverExchangeData;
        exchangeSettings[_exchangeName].exchangeLastTradeTimestamp = 0;

        enabledExchanges.push(_exchangeName);

        emit ExchangeAdded(
            _exchangeName,
            _exchangeSettings.twapMaxTradeSize,
            _exchangeSettings.exchangeLastTradeTimestamp,
            _exchangeSettings.incentivizedTwapMaxTradeSize,
            _exchangeSettings.leverExchangeData,
            _exchangeSettings.deleverExchangeData
        );
    }

    /**
     * OPERATOR ONLY: Removes an exchange. Reverts if the exchange is not already enabled. Removing exchanges during rebalances is allowed,
     * as it is not possible to enter an unexpected state while doing so.
     *
     * @param _exchangeName     Name of exchange to remove
     */
    function removeEnabledExchange(string memory _exchangeName) external onlyOperator {
        require(exchangeSettings[_exchangeName].twapMaxTradeSize != 0, "Exchange not enabled");

        delete exchangeSettings[_exchangeName];
        enabledExchanges.removeStorage(_exchangeName);

        emit ExchangeRemoved(_exchangeName);
    }

    /**
     * OPERATOR ONLY: Updates the settings of an exchange. Reverts if exchange is not already added. When updating an exchange, exchangeLastTradeTimestamp
     * is preserved. Updating exchanges during rebalances is allowed, as it is not possible to enter an unexpected state while doing so. Note: Need to
     * pass in all existing parameters even if only changing a few settings.
     *
     * @param _exchangeName         Name of the exchange
     * @param _exchangeSettings     Struct containing exchange parameters
     */
    function updateEnabledExchange(
        string memory _exchangeName,
        ExchangeSettings memory _exchangeSettings
    )
        external
        onlyOperator
    {
        require(exchangeSettings[_exchangeName].twapMaxTradeSize != 0, "Exchange not enabled");
        _validateExchangeSettings(_exchangeSettings);

        exchangeSettings[_exchangeName].twapMaxTradeSize = _exchangeSettings.twapMaxTradeSize;
        exchangeSettings[_exchangeName].incentivizedTwapMaxTradeSize = _exchangeSettings.incentivizedTwapMaxTradeSize;
        exchangeSettings[_exchangeName].leverExchangeData = _exchangeSettings.leverExchangeData;
        exchangeSettings[_exchangeName].deleverExchangeData = _exchangeSettings.deleverExchangeData;

        emit ExchangeUpdated(
            _exchangeName,
            _exchangeSettings.twapMaxTradeSize,
            _exchangeSettings.exchangeLastTradeTimestamp,
            _exchangeSettings.incentivizedTwapMaxTradeSize,
            _exchangeSettings.leverExchangeData,
            _exchangeSettings.deleverExchangeData
        );
    }

    /**
     * OPERATOR ONLY: Withdraw entire balance of ETH in this contract to operator. Rebalance must not be in progress
     */
    function withdrawEtherBalance() external onlyOperator noRebalanceInProgress {
        msg.sender.transfer(address(this).balance);
    }

    receive() external payable {}

    /* ============ External Getter Functions ============ */

    /**
     * Get current leverage ratio. Current leverage ratio is defined as the USD value of the collateral divided by the USD value of the SetToken. Prices for collateral
     * and borrow asset are retrieved from the Chainlink Price Oracle.
     *
     * return currentLeverageRatio         Current leverage ratio in precise units (10e18)
     */
    function getCurrentLeverageRatio() public view returns(uint256) {
        ActionInfo memory currentLeverageInfo = _createActionInfo();

        return _calculateCurrentLeverageRatio(currentLeverageInfo.collateralValue, currentLeverageInfo.borrowValue);
    }

    /**
     * Calculates the chunk rebalance size. This can be used by external contracts and keeper bots to calculate the optimal exchange to rebalance with.
     * Note: this function does not take into account timestamps, so it may return a nonzero value even when shouldRebalance would return ShouldRebalance.NONE for
     * all exchanges (since minimum delays have not elapsed)
     *
     * @param _exchangeNames    Array of exchange names to get rebalance sizes for
     *
     * @return sizes            Array of total notional chunk size. Measured in the asset that would be sold
     * @return sellAsset        Asset that would be sold during a rebalance
     * @return buyAsset         Asset that would be purchased during a rebalance
     */
    function getChunkRebalanceNotional(
        string[] calldata _exchangeNames
    )
        external
        view
        returns(uint256[] memory sizes, address sellAsset, address buyAsset)
    {

        uint256 newLeverageRatio;
        uint256 currentLeverageRatio = getCurrentLeverageRatio();
        bool isRipcord = false;

        // if over incentivized leverage ratio, always ripcord
        if (currentLeverageRatio > incentive.incentivizedLeverageRatio) {
            newLeverageRatio = methodology.maxLeverageRatio;
            isRipcord = true;
        // if we are in an ongoing twap, use the cached twapLeverageRatio as our target leverage
        } else if (twapLeverageRatio > 0) {
            newLeverageRatio = twapLeverageRatio;
        // if all else is false, then we would just use the normal rebalance new leverage ratio calculation
        } else {
            newLeverageRatio = _calculateNewLeverageRatio(currentLeverageRatio);
        }

        ActionInfo memory actionInfo = _createActionInfo();
        bool isLever = newLeverageRatio > currentLeverageRatio;

        sizes = new uint256[](_exchangeNames.length);

        for (uint256 i = 0; i < _exchangeNames.length; i++) {
    
            LeverageInfo memory leverageInfo = LeverageInfo({
                action: actionInfo,
                currentLeverageRatio: currentLeverageRatio,
                slippageTolerance: isRipcord ? incentive.incentivizedSlippageTolerance : execution.slippageTolerance,
                twapMaxTradeSize: isRipcord ?
                    exchangeSettings[_exchangeNames[i]].incentivizedTwapMaxTradeSize :
                    exchangeSettings[_exchangeNames[i]].twapMaxTradeSize,
                exchangeName: _exchangeNames[i]
            });

            (uint256 collateralNotional, ) = _calculateChunkRebalanceNotional(leverageInfo, newLeverageRatio, isLever);

            // _calculateBorrowUnits can convert both unit and notional values
            sizes[i] = isLever ? _calculateBorrowUnits(collateralNotional, leverageInfo.action) : collateralNotional;
        }

        sellAsset = isLever ? strategy.borrowAsset : strategy.collateralAsset;
        buyAsset = isLever ? strategy.collateralAsset : strategy.borrowAsset;
    }

    /**
     * Get current Ether incentive for when current leverage ratio exceeds incentivized leverage ratio and ripcord can be called. If ETH balance on the contract is
     * below the etherReward, then return the balance of ETH instead.
     *
     * return etherReward               Quantity of ETH reward in base units (10e18)
     */
    function getCurrentEtherIncentive() external view returns(uint256) {
        uint256 currentLeverageRatio = getCurrentLeverageRatio();

        if (currentLeverageRatio >= incentive.incentivizedLeverageRatio) {
            // If ETH reward is below the balance on this contract, then return ETH balance on contract instead
            return incentive.etherReward < address(this).balance ? incentive.etherReward : address(this).balance;
        } else {
            return 0;
        }
    }

    /**
     * Helper that checks if conditions are met for rebalance or ripcord. Returns an enum with 0 = no rebalance, 1 = call rebalance(), 2 = call iterateRebalance()
     * 3 = call ripcord()
     *
     * @return (string[] memory, ShouldRebalance[] memory)      List of exchange names and a list of enums representing whether that exchange should rebalance
     */
    function shouldRebalance() external view returns(string[] memory, ShouldRebalance[] memory) {
        uint256 currentLeverageRatio = getCurrentLeverageRatio();

        return _shouldRebalance(currentLeverageRatio, methodology.minLeverageRatio, methodology.maxLeverageRatio);
    }

    /**
     * Helper that checks if conditions are met for rebalance or ripcord with custom max and min bounds specified by caller. This function simplifies the
     * logic for off-chain keeper bots to determine what threshold to call rebalance when leverage exceeds max or drops below min. Returns an enum with
     * 0 = no rebalance, 1 = call rebalance(), 2 = call iterateRebalance(), 3 = call ripcord()
     *
     * @param _customMinLeverageRatio          Min leverage ratio passed in by caller
     * @param _customMaxLeverageRatio          Max leverage ratio passed in by caller
     *
     * @return (string[] memory, ShouldRebalance[] memory)      List of exchange names and a list of enums representing whether that exchange should rebalance
     */
    function shouldRebalanceWithBounds(
        uint256 _customMinLeverageRatio,
        uint256 _customMaxLeverageRatio
    )
        external
        view
        returns(string[] memory, ShouldRebalance[] memory)
    {
        require (
            _customMinLeverageRatio <= methodology.minLeverageRatio && _customMaxLeverageRatio >= methodology.maxLeverageRatio,
            "Custom bounds must be valid"
        );

        uint256 currentLeverageRatio = getCurrentLeverageRatio();

        return _shouldRebalance(currentLeverageRatio, _customMinLeverageRatio, _customMaxLeverageRatio);
    }

    /**
     * Gets the list of enabled exchanges
     */
    function getEnabledExchanges() external view returns (string[] memory) {
        return enabledExchanges;
    }

    /**
     * Explicit getter functions for parameter structs are defined as workaround to issues fetching structs that have dynamic types.
     */
    function getStrategy() external view returns (ContractSettings memory) { return strategy; }
    function getMethodology() external view returns (MethodologySettings memory) { return methodology; }
    function getExecution() external view returns (ExecutionSettings memory) { return execution; }
    function getIncentive() external view returns (IncentiveSettings memory) { return incentive; }
    function getExchangeSettings(string memory _exchangeName) external view returns (ExchangeSettings memory) {
        return exchangeSettings[_exchangeName];
    }

    /* ============ Internal Functions ============ */

    /**
     * Calculate notional rebalance quantity, whether to chunk rebalance based on max trade size and max borrow and invoke lever on AaveLeverageModule
     *
     */
     function _lever(
        LeverageInfo memory _leverageInfo,
        uint256 _chunkRebalanceNotional
    )
        internal
    {
        uint256 collateralRebalanceUnits = _chunkRebalanceNotional.preciseDiv(_leverageInfo.action.setTotalSupply);

        uint256 borrowUnits = _calculateBorrowUnits(collateralRebalanceUnits, _leverageInfo.action);

        uint256 minReceiveCollateralUnits = _calculateMinCollateralReceiveUnits(collateralRebalanceUnits, _leverageInfo.slippageTolerance);

        bytes memory leverCallData = abi.encodeWithSignature(
            "lever(address,address,address,uint256,uint256,string,bytes)",
            address(strategy.setToken),
            strategy.borrowAsset,
            strategy.collateralAsset,
            borrowUnits,
            minReceiveCollateralUnits,
            _leverageInfo.exchangeName,
            exchangeSettings[_leverageInfo.exchangeName].leverExchangeData
        );

        invokeManager(address(strategy.leverageModule), leverCallData);
    }

    /**
     * Calculate delever units Invoke delever on AaveLeverageModule.
     */
    function _delever(
        LeverageInfo memory _leverageInfo,
        uint256 _chunkRebalanceNotional
    )
        internal
    {
        uint256 collateralRebalanceUnits = _chunkRebalanceNotional.preciseDiv(_leverageInfo.action.setTotalSupply);

        uint256 minRepayUnits = _calculateMinRepayUnits(collateralRebalanceUnits, _leverageInfo.slippageTolerance, _leverageInfo.action);

        bytes memory deleverCallData = abi.encodeWithSignature(
            "delever(address,address,address,uint256,uint256,string,bytes)",
            address(strategy.setToken),
            strategy.collateralAsset,
            strategy.borrowAsset,
            collateralRebalanceUnits,
            minRepayUnits,
            _leverageInfo.exchangeName,
            exchangeSettings[_leverageInfo.exchangeName].deleverExchangeData
        );

        invokeManager(address(strategy.leverageModule), deleverCallData);
    }

    /**
     * Invoke deleverToZeroBorrowBalance on AaveLeverageModule.
     */
    function _deleverToZeroBorrowBalance(
        LeverageInfo memory _leverageInfo,
        uint256 _chunkRebalanceNotional
    )
        internal
    {
        // Account for slippage tolerance in redeem quantity for the deleverToZeroBorrowBalance function
        uint256 maxCollateralRebalanceUnits = _chunkRebalanceNotional
            .preciseMul(PreciseUnitMath.preciseUnit().add(execution.slippageTolerance))
            .preciseDiv(_leverageInfo.action.setTotalSupply);

        bytes memory deleverToZeroBorrowBalanceCallData = abi.encodeWithSignature(
            "deleverToZeroBorrowBalance(address,address,address,uint256,string,bytes)",
            address(strategy.setToken),
            strategy.collateralAsset,
            strategy.borrowAsset,
            maxCollateralRebalanceUnits,
            _leverageInfo.exchangeName,
            exchangeSettings[_leverageInfo.exchangeName].deleverExchangeData
        );

        invokeManager(address(strategy.leverageModule), deleverToZeroBorrowBalanceCallData);
    }

    /**
     * Check whether to delever or lever based on the current vs new leverage ratios. Used in the rebalance() and iterateRebalance() functions
     *
     * return uint256           Calculated notional to trade
     * return uint256           Total notional to rebalance over TWAP
     */
    function _handleRebalance(LeverageInfo memory _leverageInfo, uint256 _newLeverageRatio) internal returns(uint256, uint256) {
        uint256 chunkRebalanceNotional;
        uint256 totalRebalanceNotional;
        if (_newLeverageRatio < _leverageInfo.currentLeverageRatio) {
            (
                chunkRebalanceNotional,
                totalRebalanceNotional
            ) = _calculateChunkRebalanceNotional(_leverageInfo, _newLeverageRatio, false);

            _delever(_leverageInfo, chunkRebalanceNotional);
        } else {
            (
                chunkRebalanceNotional,
                totalRebalanceNotional
            ) = _calculateChunkRebalanceNotional(_leverageInfo, _newLeverageRatio, true);

            _lever(_leverageInfo, chunkRebalanceNotional);
        }

        return (chunkRebalanceNotional, totalRebalanceNotional);
    }

    /**
     * Create the leverage info struct to be used in internal functions
     *
     * return LeverageInfo                Struct containing ActionInfo and other data
     */
    function _getAndValidateLeveragedInfo(uint256 _slippageTolerance, uint256 _maxTradeSize, string memory _exchangeName) internal view returns(LeverageInfo memory) {
        // Assume if maxTradeSize is 0, then the exchange is not enabled. This is enforced by addEnabledExchange and updateEnabledExchange
        require(_maxTradeSize > 0, "Must be valid exchange");

        ActionInfo memory actionInfo = _createActionInfo();

        require(actionInfo.setTotalSupply > 0, "SetToken must have > 0 supply");
        require(actionInfo.collateralBalance > 0, "Collateral balance must be > 0");
        require(actionInfo.borrowBalance > 0, "Borrow balance must exist");

        // Get current leverage ratio
        uint256 currentLeverageRatio = _calculateCurrentLeverageRatio(
            actionInfo.collateralValue,
            actionInfo.borrowValue
        );

        return LeverageInfo({
            action: actionInfo,
            currentLeverageRatio: currentLeverageRatio,
            slippageTolerance: _slippageTolerance,
            twapMaxTradeSize: _maxTradeSize,
            exchangeName: _exchangeName
        });
    }

    /**
     * Create the action info struct to be used in internal functions
     *
     * return ActionInfo                Struct containing data used by internal lever and delever functions
     */
    function _createActionInfo() internal view returns(ActionInfo memory) {
        ActionInfo memory rebalanceInfo;

        // Calculate prices from chainlink. Chainlink returns prices with 8 decimal places, but we need 36 - underlyingDecimals decimal places.
        // This is so that when the underlying amount is multiplied by the received price, the collateral valuation is normalized to 36 decimals. 
        // To perform this adjustment, we multiply by 10^(36 - 8 - underlyingDecimals)
        int256 rawCollateralPrice = strategy.collateralPriceOracle.latestAnswer();
        rebalanceInfo.collateralPrice = rawCollateralPrice.toUint256().mul(10 ** strategy.collateralDecimalAdjustment);
        int256 rawBorrowPrice = strategy.borrowPriceOracle.latestAnswer();
        rebalanceInfo.borrowPrice = rawBorrowPrice.toUint256().mul(10 ** strategy.borrowDecimalAdjustment);

        rebalanceInfo.collateralBalance = strategy.targetCollateralAToken.balanceOf(address(strategy.setToken));
        rebalanceInfo.borrowBalance = strategy.targetBorrowDebtToken.balanceOf(address(strategy.setToken));
        rebalanceInfo.collateralValue = rebalanceInfo.collateralPrice.preciseMul(rebalanceInfo.collateralBalance);
        rebalanceInfo.borrowValue = rebalanceInfo.borrowPrice.preciseMul(rebalanceInfo.borrowBalance);
        rebalanceInfo.setTotalSupply = strategy.setToken.totalSupply();

        return rebalanceInfo;
    }

    /**
     * Validate non-exchange settings in constructor and setters when updating.
     */
    function _validateNonExchangeSettings(
        MethodologySettings memory _methodology,
        ExecutionSettings memory _execution,
        IncentiveSettings memory _incentive
    )
        internal
        pure
    {
        require (
            _methodology.minLeverageRatio <= _methodology.targetLeverageRatio && _methodology.minLeverageRatio > 0,
            "Must be valid min leverage"
        );
        require (
            _methodology.maxLeverageRatio >= _methodology.targetLeverageRatio,
            "Must be valid max leverage"
        );
        require (
            _methodology.recenteringSpeed <= PreciseUnitMath.preciseUnit() && _methodology.recenteringSpeed > 0,
            "Must be valid recentering speed"
        );
        require (
            _execution.unutilizedLeveragePercentage <= PreciseUnitMath.preciseUnit(),
            "Unutilized leverage must be <100%"
        );
        require (
            _execution.slippageTolerance <= PreciseUnitMath.preciseUnit(),
            "Slippage tolerance must be <100%"
        );
        require (
            _incentive.incentivizedSlippageTolerance <= PreciseUnitMath.preciseUnit(),
            "Incentivized slippage tolerance must be <100%"
        );
        require (
            _incentive.incentivizedLeverageRatio >= _methodology.maxLeverageRatio,
            "Incentivized leverage ratio must be > max leverage ratio"
        );
        require (
            _methodology.rebalanceInterval >= _execution.twapCooldownPeriod,
            "Rebalance interval must be greater than TWAP cooldown period"
        );
        require (
            _execution.twapCooldownPeriod >= _incentive.incentivizedTwapCooldownPeriod,
            "TWAP cooldown must be greater than incentivized TWAP cooldown"
        );
    }

    /**
     * Validate an ExchangeSettings struct when adding or updating an exchange. Does not validate that twapMaxTradeSize < incentivizedMaxTradeSize since
     * it may be useful to disable exchanges for ripcord by setting incentivizedMaxTradeSize to 0.
     */
     function _validateExchangeSettings(ExchangeSettings memory _settings) internal pure {
         require(_settings.twapMaxTradeSize != 0, "Max TWAP trade size must not be 0");
     }

    /**
     * Validate that current leverage is below incentivized leverage ratio and cooldown / rebalance period has elapsed or outsize max/min bounds. Used
     * in rebalance() and iterateRebalance() functions
     */
    function _validateNormalRebalance(LeverageInfo memory _leverageInfo, uint256 _coolDown, uint256 _lastTradeTimestamp) internal view {
        require(_leverageInfo.currentLeverageRatio < incentive.incentivizedLeverageRatio, "Must be below incentivized leverage ratio");
        require(
            block.timestamp.sub(_lastTradeTimestamp) > _coolDown
            || _leverageInfo.currentLeverageRatio > methodology.maxLeverageRatio
            || _leverageInfo.currentLeverageRatio < methodology.minLeverageRatio,
            "Cooldown not elapsed or not valid leverage ratio"
        );
    }

    /**
     * Validate that current leverage is above incentivized leverage ratio and incentivized cooldown period has elapsed in ripcord()
     */
    function _validateRipcord(LeverageInfo memory _leverageInfo, uint256 _lastTradeTimestamp) internal view {
        require(_leverageInfo.currentLeverageRatio >= incentive.incentivizedLeverageRatio, "Must be above incentivized leverage ratio");
        // If currently in the midst of a TWAP rebalance, ensure that the cooldown period has elapsed
        require(_lastTradeTimestamp.add(incentive.incentivizedTwapCooldownPeriod) < block.timestamp, "TWAP cooldown must have elapsed");
    }

    /**
     * Validate TWAP in the iterateRebalance() function
     */
    function _validateTWAP() internal view {
        require(twapLeverageRatio > 0, "Not in TWAP state");
    }

    /**
     * Validate not TWAP in the rebalance() function
     */
    function _validateNonTWAP() internal view {
        require(twapLeverageRatio == 0, "Must call iterate");
    }

    /**
     * Check if price has moved advantageously while in the midst of the TWAP rebalance. This means the current leverage ratio has moved over/under
     * the stored TWAP leverage ratio on lever/delever so there is no need to execute a rebalance. Used in iterateRebalance()
     */
    function _isAdvantageousTWAP(uint256 _currentLeverageRatio) internal view returns (bool) {
        return (
            (twapLeverageRatio < methodology.targetLeverageRatio && _currentLeverageRatio >= twapLeverageRatio)
            || (twapLeverageRatio > methodology.targetLeverageRatio && _currentLeverageRatio <= twapLeverageRatio)
        );
    }

    /**
     * Calculate the current leverage ratio given a valuation of the collateral and borrow asset, which is calculated as collateral USD valuation / SetToken USD valuation
     *
     * return uint256            Current leverage ratio
     */
    function _calculateCurrentLeverageRatio(
        uint256 _collateralValue,
        uint256 _borrowValue
    )
        internal
        pure
        returns(uint256)
    {
        return _collateralValue.preciseDiv(_collateralValue.sub(_borrowValue));
    }

    /**
     * Calculate the new leverage ratio. The methodology reduces the size of each rebalance by weighting
     * the current leverage ratio against the target leverage ratio by the recentering speed percentage. The lower the recentering speed, the slower
     * the leverage token will move towards the target leverage each rebalance.
     *
     * return uint256          New leverage ratio
     */
    function _calculateNewLeverageRatio(uint256 _currentLeverageRatio) internal view returns(uint256) {
        // CLRt+1 = max(MINLR, min(MAXLR, CLRt * (1 - RS) + TLR * RS))
        // a: TLR * RS
        // b: (1- RS) * CLRt
        // c: (1- RS) * CLRt + TLR * RS
        // d: min(MAXLR, CLRt * (1 - RS) + TLR * RS)
        uint256 a = methodology.targetLeverageRatio.preciseMul(methodology.recenteringSpeed);
        uint256 b = PreciseUnitMath.preciseUnit().sub(methodology.recenteringSpeed).preciseMul(_currentLeverageRatio);
        uint256 c = a.add(b);
        uint256 d = Math.min(c, methodology.maxLeverageRatio);
        return Math.max(methodology.minLeverageRatio, d);
    }

    /**
     * Calculate total notional rebalance quantity and chunked rebalance quantity in collateral units.
     *
     * return uint256          Chunked rebalance notional in collateral units
     * return uint256          Total rebalance notional in collateral units
     */
    function _calculateChunkRebalanceNotional(
        LeverageInfo memory _leverageInfo,
        uint256 _newLeverageRatio,
        bool _isLever
    )
        internal
        view
        returns (uint256, uint256)
    {
        // Calculate absolute value of difference between new and current leverage ratio
        uint256 leverageRatioDifference = _isLever ? _newLeverageRatio.sub(_leverageInfo.currentLeverageRatio) : _leverageInfo.currentLeverageRatio.sub(_newLeverageRatio);

        uint256 totalRebalanceNotional = leverageRatioDifference.preciseDiv(_leverageInfo.currentLeverageRatio).preciseMul(_leverageInfo.action.collateralBalance);

        uint256 maxBorrow = _calculateMaxBorrowCollateral(_leverageInfo.action, _isLever);

        uint256 chunkRebalanceNotional = Math.min(Math.min(maxBorrow, totalRebalanceNotional), _leverageInfo.twapMaxTradeSize);

        return (chunkRebalanceNotional, totalRebalanceNotional);
    }

    /**
     * Calculate the max borrow / repay amount allowed in base units for lever / delever. This is due to overcollateralization requirements on
     * assets deposited in lending protocols for borrowing.
     *
     * For lever, max borrow is calculated as:
     * (Net borrow limit in USD - existing borrow value in USD) / collateral asset price adjusted for decimals
     *
     * For delever, max repay is calculated as:
     * Collateral balance in base units * (net borrow limit in USD - existing borrow value in USD) / net borrow limit in USD
     *
     * Net borrow limit for levering is calculated as:
     * The collateral value in USD * Aave collateral factor * (1 - unutilized leverage %)
     *
     * Net repay limit for delevering is calculated as:
     * The collateral value in USD * Aave liquiditon threshold * (1 - unutilized leverage %)
     *
     * return uint256          Max borrow notional denominated in collateral asset
     */
    function _calculateMaxBorrowCollateral(ActionInfo memory _actionInfo, bool _isLever) internal view returns(uint256) {
        
        // Retrieve collateral factor and liquidation threshold for the collateral asset in precise units (1e16 = 1%)
        ( , uint256 maxLtvRaw, uint256 liquidationThresholdRaw, , , , , , ,) = strategy.aaveProtocolDataProvider.getReserveConfigurationData(address(strategy.collateralAsset));

        // Normalize LTV and liquidation threshold to precise units. LTV is measured in 4 decimals in Aave which is why we must multiply by 1e14
        // for example ETH has an LTV value of 8000 which represents 80%
        if (_isLever) {
            uint256 netBorrowLimit = _actionInfo.collateralValue
                .preciseMul(maxLtvRaw.mul(10 ** 14))
                .preciseMul(PreciseUnitMath.preciseUnit().sub(execution.unutilizedLeveragePercentage));

            return netBorrowLimit
                .sub(_actionInfo.borrowValue)
                .preciseDiv(_actionInfo.collateralPrice);
        } else {
            uint256 netRepayLimit = _actionInfo.collateralValue
                .preciseMul(liquidationThresholdRaw.mul(10 ** 14))
                .preciseMul(PreciseUnitMath.preciseUnit().sub(execution.unutilizedLeveragePercentage));

            return _actionInfo.collateralBalance
                .preciseMul(netRepayLimit.sub(_actionInfo.borrowValue))
                .preciseDiv(netRepayLimit);
        }
    }

    /**
     * Derive the borrow units for lever. The units are calculated by the collateral units multiplied by collateral / borrow asset price.
     * Output is measured to borrow unit decimals.
     *
     * return uint256           Position units to borrow
     */
    function _calculateBorrowUnits(uint256 _collateralRebalanceUnits, ActionInfo memory _actionInfo) internal pure returns (uint256) {
        return _collateralRebalanceUnits.preciseMul(_actionInfo.collateralPrice).preciseDiv(_actionInfo.borrowPrice);
    }

    /**
     * Calculate the min receive units in collateral units for lever. Units are calculated as target collateral rebalance units multiplied by slippage tolerance
     * Output is measured in collateral asset decimals.
     *
     * return uint256           Min position units to receive after lever trade
     */
    function _calculateMinCollateralReceiveUnits(uint256 _collateralRebalanceUnits, uint256 _slippageTolerance) internal pure returns (uint256) {
        return _collateralRebalanceUnits.preciseMul(PreciseUnitMath.preciseUnit().sub(_slippageTolerance));
    }

    /**
     * Derive the min repay units from collateral units for delever. Units are calculated as target collateral rebalance units multiplied by slippage tolerance
     * and pair price (collateral oracle price / borrow oracle price). Output is measured in borrow unit decimals.
     *
     * return uint256           Min position units to repay in borrow asset
     */
    function _calculateMinRepayUnits(uint256 _collateralRebalanceUnits, uint256 _slippageTolerance, ActionInfo memory _actionInfo) internal pure returns (uint256) {
        return _collateralRebalanceUnits
            .preciseMul(_actionInfo.collateralPrice)
            .preciseDiv(_actionInfo.borrowPrice)
            .preciseMul(PreciseUnitMath.preciseUnit().sub(_slippageTolerance));
    }

    /**
     * Update last trade timestamp and if chunk rebalance size is less than total rebalance notional, store new leverage ratio to kick off TWAP. Used in
     * the engage() and rebalance() functions
     */
    function _updateRebalanceState(
        uint256 _chunkRebalanceNotional,
        uint256 _totalRebalanceNotional,
        uint256 _newLeverageRatio,
        string memory _exchangeName
    )
        internal
    {

        _updateLastTradeTimestamp(_exchangeName);

        if (_chunkRebalanceNotional < _totalRebalanceNotional) {
            twapLeverageRatio = _newLeverageRatio;
        }
    }

    /**
     * Update last trade timestamp and if chunk rebalance size is equal to the total rebalance notional, end TWAP by clearing state. This function is used
     * in iterateRebalance()
     */
    function _updateIterateState(uint256 _chunkRebalanceNotional, uint256 _totalRebalanceNotional, string memory _exchangeName) internal {

        _updateLastTradeTimestamp(_exchangeName);

        // If the chunk size is equal to the total notional meaning that rebalances are not chunked, then clear TWAP state.
        if (_chunkRebalanceNotional == _totalRebalanceNotional) {
            delete twapLeverageRatio;
        }
    }

    /**
     * Update last trade timestamp and if currently in a TWAP, delete the TWAP state. Used in the ripcord() function.
     */
    function _updateRipcordState(string memory _exchangeName) internal {

        _updateLastTradeTimestamp(_exchangeName);

        // If TWAP leverage ratio is stored, then clear state. This may happen if we are currently in a TWAP rebalance, and the leverage ratio moves above the
        // incentivized threshold for ripcord.
        if (twapLeverageRatio > 0) {
            delete twapLeverageRatio;
        }
    }

    /**
     * Update globalLastTradeTimestamp and exchangeLastTradeTimestamp values. This function updates both the exchange-specific and global timestamp so that the
     * epoch rebalance can use the global timestamp (since the global timestamp is always  equal to the most recently used exchange timestamp). This allows for
     * multiple rebalances to occur simultaneously since only the exchange-specific timestamp is checked for non-epoch rebalances.
     */
     function _updateLastTradeTimestamp(string memory _exchangeName) internal {
        globalLastTradeTimestamp = block.timestamp;
        exchangeSettings[_exchangeName].exchangeLastTradeTimestamp = block.timestamp;
     }

    /**
     * Transfer ETH reward to caller of the ripcord function. If the ETH balance on this contract is less than required
     * incentive quantity, then transfer contract balance instead to prevent reverts.
     *
     * return uint256           Amount of ETH transferred to caller
     */
    function _transferEtherRewardToCaller(uint256 _etherReward) internal returns(uint256) {
        uint256 etherToTransfer = _etherReward < address(this).balance ? _etherReward : address(this).balance;

        msg.sender.transfer(etherToTransfer);

        return etherToTransfer;
    }

    /**
     * Internal function returning the ShouldRebalance enum used in shouldRebalance and shouldRebalanceWithBounds external getter functions
     *
     * return ShouldRebalance         Enum detailing whether to rebalance, iterateRebalance, ripcord or no action
     */
    function _shouldRebalance(
        uint256 _currentLeverageRatio,
        uint256 _minLeverageRatio,
        uint256 _maxLeverageRatio
    )
        internal
        view
        returns(string[] memory, ShouldRebalance[] memory)
    {

        ShouldRebalance[] memory shouldRebalanceEnums = new ShouldRebalance[](enabledExchanges.length);

        for (uint256 i = 0; i < enabledExchanges.length; i++) {
            // If none of the below conditions are satisfied, then should not rebalance
            shouldRebalanceEnums[i] = ShouldRebalance.NONE;

            // If above ripcord threshold, then check if incentivized cooldown period has elapsed
            if (_currentLeverageRatio >= incentive.incentivizedLeverageRatio) {
                if (exchangeSettings[enabledExchanges[i]].exchangeLastTradeTimestamp.add(incentive.incentivizedTwapCooldownPeriod) < block.timestamp) {
                    shouldRebalanceEnums[i] = ShouldRebalance.RIPCORD;
                }
            } else {
                // If TWAP, then check if the cooldown period has elapsed
                if (twapLeverageRatio > 0) {
                    if (exchangeSettings[enabledExchanges[i]].exchangeLastTradeTimestamp.add(execution.twapCooldownPeriod) < block.timestamp) {
                        shouldRebalanceEnums[i] = ShouldRebalance.ITERATE_REBALANCE;
                    }
                } else {
                    // If not TWAP, then check if the rebalance interval has elapsed OR current leverage is above max leverage OR current leverage is below
                    // min leverage
                    if (
                        block.timestamp.sub(globalLastTradeTimestamp) > methodology.rebalanceInterval
                        || _currentLeverageRatio > _maxLeverageRatio
                        || _currentLeverageRatio < _minLeverageRatio
                    ) {
                        shouldRebalanceEnums[i] = ShouldRebalance.REBALANCE;
                    }
                }
            }
        }

        return (enabledExchanges, shouldRebalanceEnums);
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { AddressArrayUtils } from "../lib/AddressArrayUtils.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";

/**
 * @title BaseExtension
 * @author Set Protocol
 *
 * Abstract class that houses common extension-related state and functions.
 */
abstract contract BaseExtension {
    using AddressArrayUtils for address[];

    /* ============ Events ============ */

    event CallerStatusUpdated(address indexed _caller, bool _status);
    event AnyoneCallableUpdated(bool indexed _status);

    /* ============ Modifiers ============ */

    /**
     * Throws if the sender is not the SetToken operator
     */
    modifier onlyOperator() {
        require(msg.sender == manager.operator(), "Must be operator");
        _;
    }

    /**
     * Throws if the sender is not the SetToken methodologist
     */
    modifier onlyMethodologist() {
        require(msg.sender == manager.methodologist(), "Must be methodologist");
        _;
    }

    /**
     * Throws if caller is a contract, can be used to stop flash loan and sandwich attacks
     */
    modifier onlyEOA() {
        require(msg.sender == tx.origin, "Caller must be EOA Address");
        _;
    }

    /**
     * Throws if not allowed caller
     */
    modifier onlyAllowedCaller(address _caller) {
        require(isAllowedCaller(_caller), "Address not permitted to call");
        _;
    }

    /* ============ State Variables ============ */

    // Instance of manager contract
    IBaseManager public manager;

    // Boolean indicating if anyone can call function
    bool public anyoneCallable;

    // Mapping of addresses allowed to call function
    mapping(address => bool) public callAllowList;

    /* ============ Constructor ============ */

    constructor(IBaseManager _manager) public { manager = _manager; }

    /* ============ External Functions ============ */

    /**
     * OPERATOR ONLY: Toggle ability for passed addresses to call only allowed caller functions
     *
     * @param _callers           Array of caller addresses to toggle status
     * @param _statuses          Array of statuses for each caller
     */
    function updateCallerStatus(address[] calldata _callers, bool[] calldata _statuses) external onlyOperator {
        require(_callers.length == _statuses.length, "Array length mismatch");
        require(_callers.length > 0, "Array length must be > 0");
        require(!_callers.hasDuplicate(), "Cannot duplicate callers");

        for (uint256 i = 0; i < _callers.length; i++) {
            address caller = _callers[i];
            bool status = _statuses[i];
            callAllowList[caller] = status;
            emit CallerStatusUpdated(caller, status);
        }
    }

    /**
     * OPERATOR ONLY: Toggle whether anyone can call function, bypassing the callAllowlist
     *
     * @param _status           Boolean indicating whether to allow anyone call
     */
    function updateAnyoneCallable(bool _status) external onlyOperator {
        anyoneCallable = _status;
        emit AnyoneCallableUpdated(_status);
    }

    /* ============ Internal Functions ============ */

    /**
     * Invoke manager to transfer tokens from manager to other contract.
     *
     * @param _token           Token being transferred from manager contract
     * @param _amount          Amount of token being transferred
     */
    function invokeManagerTransfer(address _token, address _destination, uint256 _amount) internal {
        manager.transferTokens(_token, _destination, _amount);
    }

    /**
     * Invoke call from manager
     *
     * @param _module           Module to interact with
     * @param _encoded          Encoded byte data
     */
    function invokeManager(address _module, bytes memory _encoded) internal {
        manager.interactManager(_module, _encoded);
    }

    /**
     * Determine if passed address is allowed to call function. If anyoneCallable set to true anyone can call otherwise needs to be approved.
     *
     * return bool              Boolean indicating if allowed caller
     */
    function isAllowedCaller(address _caller) internal view virtual returns (bool) {
        return anyoneCallable || callAllowList[_caller];
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { ISetToken } from "./ISetToken.sol";

interface IBaseManager {
    function setToken() external returns(ISetToken);

    function methodologist() external returns(address);

    function operator() external returns(address);

    function interactManager(address _module, bytes calldata _encoded) external;

    function transferTokens(address _token, address _destination, uint256 _amount) external;
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;

interface IChainlinkAggregatorV3 {
    function latestAnswer() external view returns (int256);
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { ISetToken } from "./ISetToken.sol";

interface ILeverageModule {
    function sync(
        ISetToken _setToken
    ) external;

    function lever(
        ISetToken _setToken,
        address _borrowAsset,
        address _collateralAsset,
        uint256 _borrowQuantity,
        uint256 _minReceiveQuantity,
        string memory _tradeAdapterName,
        bytes memory _tradeData
    ) external;

    function delever(
        ISetToken _setToken,
        address _collateralAsset,
        address _repayAsset,
        uint256 _redeemQuantity,
        uint256 _minRepayQuantity,
        string memory _tradeAdapterName,
        bytes memory _tradeData
    ) external;

    function gulp(
        ISetToken _setToken,
        address _collateralAsset,
        uint256 _minNotionalReceiveQuantity,
        string memory _tradeAdapterName,
        bytes memory _tradeData
    ) external;
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

interface IProtocolDataProvider {
  struct TokenData {
    string symbol;
    address tokenAddress;
  }

  function ADDRESSES_PROVIDER() external view returns (address);
  function getAllReservesTokens() external view returns (TokenData[] memory);
  function getAllATokens() external view returns (TokenData[] memory);
  function getReserveConfigurationData(address asset) external view returns (uint256 decimals, uint256 ltv, uint256 liquidationThreshold, uint256 liquidationBonus, uint256 reserveFactor, bool usageAsCollateralEnabled, bool borrowingEnabled, bool stableBorrowRateEnabled, bool isActive, bool isFrozen);
  function getReserveData(address asset) external view returns (uint256 availableLiquidity, uint256 totalStableDebt, uint256 totalVariableDebt, uint256 liquidityRate, uint256 variableBorrowRate, uint256 stableBorrowRate, uint256 averageStableBorrowRate, uint256 liquidityIndex, uint256 variableBorrowIndex, uint40 lastUpdateTimestamp);
  function getUserReserveData(address asset, address user) external view returns (uint256 currentATokenBalance, uint256 currentStableDebt, uint256 currentVariableDebt, uint256 principalStableDebt, uint256 scaledVariableDebt, uint256 stableBorrowRate, uint256 liquidityRate, uint40 stableRateLastUpdated, bool usageAsCollateralEnabled);
  function getReserveTokensAddresses(address asset) external view returns (address aTokenAddress, address stableDebtTokenAddress, address variableDebtTokenAddress);
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/**
 * @title ISetToken
 * @author Set Protocol
 *
 * Interface for operating with SetTokens.
 */
interface ISetToken is IERC20 {

    /* ============ Enums ============ */

    enum ModuleState {
        NONE,
        PENDING,
        INITIALIZED
    }

    /* ============ Structs ============ */
    /**
     * The base definition of a SetToken Position
     *
     * @param component           Address of token in the Position
     * @param module              If not in default state, the address of associated module
     * @param unit                Each unit is the # of components per 10^18 of a SetToken
     * @param positionState       Position ENUM. Default is 0; External is 1
     * @param data                Arbitrary data
     */
    struct Position {
        address component;
        address module;
        int256 unit;
        uint8 positionState;
        bytes data;
    }

    /**
     * A struct that stores a component's cash position details and external positions
     * This data structure allows O(1) access to a component's cash position units and
     * virtual units.
     *
     * @param virtualUnit               Virtual value of a component's DEFAULT position. Stored as virtual for efficiency
     *                                  updating all units at once via the position multiplier. Virtual units are achieved
     *                                  by dividing a "real" value by the "positionMultiplier"
     * @param componentIndex
     * @param externalPositionModules   List of external modules attached to each external position. Each module
     *                                  maps to an external position
     * @param externalPositions         Mapping of module => ExternalPosition struct for a given component
     */
    struct ComponentPosition {
      int256 virtualUnit;
      address[] externalPositionModules;
      mapping(address => ExternalPosition) externalPositions;
    }

    /**
     * A struct that stores a component's external position details including virtual unit and any
     * auxiliary data.
     *
     * @param virtualUnit       Virtual value of a component's EXTERNAL position.
     * @param data              Arbitrary data
     */
    struct ExternalPosition {
      int256 virtualUnit;
      bytes data;
    }


    /* ============ Functions ============ */

    function addComponent(address _component) external;
    function removeComponent(address _component) external;
    function editDefaultPositionUnit(address _component, int256 _realUnit) external;
    function addExternalPositionModule(address _component, address _positionModule) external;
    function removeExternalPositionModule(address _component, address _positionModule) external;
    function editExternalPositionUnit(address _component, address _positionModule, int256 _realUnit) external;
    function editExternalPositionData(address _component, address _positionModule, bytes calldata _data) external;

    function invoke(address _target, uint256 _value, bytes calldata _data) external returns(bytes memory);

    function editPositionMultiplier(int256 _newMultiplier) external;

    function mint(address _account, uint256 _quantity) external;
    function burn(address _account, uint256 _quantity) external;

    function lock() external;
    function unlock() external;

    function addModule(address _module) external;
    function removeModule(address _module) external;
    function initializeModule() external;

    function setManager(address _manager) external;

    function manager() external view returns (address);
    function moduleStates(address _module) external view returns (ModuleState);
    function getModules() external view returns (address[] memory);

    function getDefaultPositionRealUnit(address _component) external view returns(int256);
    function getExternalPositionRealUnit(address _component, address _positionModule) external view returns(int256);
    function getComponents() external view returns(address[] memory);
    function getExternalPositionModules(address _component) external view returns(address[] memory);
    function getExternalPositionData(address _component, address _positionModule) external view returns(bytes memory);
    function isExternalPositionModule(address _component, address _module) external view returns(bool);
    function isComponent(address _component) external view returns(bool);

    function positionMultiplier() external view returns (int256);
    function getPositions() external view returns (Position[] memory);
    function getTotalComponentRealUnits(address _component) external view returns(int256);

    function isInitializedModule(address _module) external view returns(bool);
    function isPendingModule(address _module) external view returns(bool);
    function isLocked() external view returns (bool);
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SignedSafeMath } from "@openzeppelin/contracts/math/SignedSafeMath.sol";


/**
 * @title PreciseUnitMath
 * @author Set Protocol
 *
 * Arithmetic for fixed-point numbers with 18 decimals of precision. Some functions taken from
 * dYdX's BaseMath library.
 *
 * CHANGELOG:
 * - 9/21/20: Added safePower function
 */
library PreciseUnitMath {
    using SafeMath for uint256;
    using SignedSafeMath for int256;

    // The number One in precise units.
    uint256 constant internal PRECISE_UNIT = 10 ** 18;
    int256 constant internal PRECISE_UNIT_INT = 10 ** 18;

    // Max unsigned integer value
    uint256 constant internal MAX_UINT_256 = type(uint256).max;
    // Max and min signed integer value
    int256 constant internal MAX_INT_256 = type(int256).max;
    int256 constant internal MIN_INT_256 = type(int256).min;

    /**
     * @dev Getter function since constants can't be read directly from libraries.
     */
    function preciseUnit() internal pure returns (uint256) {
        return PRECISE_UNIT;
    }

    /**
     * @dev Getter function since constants can't be read directly from libraries.
     */
    function preciseUnitInt() internal pure returns (int256) {
        return PRECISE_UNIT_INT;
    }

    /**
     * @dev Getter function since constants can't be read directly from libraries.
     */
    function maxUint256() internal pure returns (uint256) {
        return MAX_UINT_256;
    }

    /**
     * @dev Getter function since constants can't be read directly from libraries.
     */
    function maxInt256() internal pure returns (int256) {
        return MAX_INT_256;
    }

    /**
     * @dev Getter function since constants can't be read directly from libraries.
     */
    function minInt256() internal pure returns (int256) {
        return MIN_INT_256;
    }

    /**
     * @dev Multiplies value a by value b (result is rounded down). It's assumed that the value b is the significand
     * of a number with 18 decimals precision.
     */
    function preciseMul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a.mul(b).div(PRECISE_UNIT);
    }

    /**
     * @dev Multiplies value a by value b (result is rounded towards zero). It's assumed that the value b is the
     * significand of a number with 18 decimals precision.
     */
    function preciseMul(int256 a, int256 b) internal pure returns (int256) {
        return a.mul(b).div(PRECISE_UNIT_INT);
    }

    /**
     * @dev Multiplies value a by value b (result is rounded up). It's assumed that the value b is the significand
     * of a number with 18 decimals precision.
     */
    function preciseMulCeil(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0 || b == 0) {
            return 0;
        }
        return a.mul(b).sub(1).div(PRECISE_UNIT).add(1);
    }

    /**
     * @dev Divides value a by value b (result is rounded down).
     */
    function preciseDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        return a.mul(PRECISE_UNIT).div(b);
    }


    /**
     * @dev Divides value a by value b (result is rounded towards 0).
     */
    function preciseDiv(int256 a, int256 b) internal pure returns (int256) {
        return a.mul(PRECISE_UNIT_INT).div(b);
    }

    /**
     * @dev Divides value a by value b (result is rounded up or away from 0).
     */
    function preciseDivCeil(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "Cant divide by 0");

        return a > 0 ? a.mul(PRECISE_UNIT).sub(1).div(b).add(1) : 0;
    }

    /**
     * @dev Divides value a by value b (result is rounded down - positive numbers toward 0 and negative away from 0).
     */
    function divDown(int256 a, int256 b) internal pure returns (int256) {
        require(b != 0, "Cant divide by 0");
        require(a != MIN_INT_256 || b != -1, "Invalid input");

        int256 result = a.div(b);
        if (a ^ b < 0 && a % b != 0) {
            result -= 1;
        }

        return result;
    }

    /**
     * @dev Multiplies value a by value b where rounding is towards the lesser number. 
     * (positive values are rounded towards zero and negative values are rounded away from 0). 
     */
    function conservativePreciseMul(int256 a, int256 b) internal pure returns (int256) {
        return divDown(a.mul(b), PRECISE_UNIT_INT);
    }

    /**
     * @dev Divides value a by value b where rounding is towards the lesser number. 
     * (positive values are rounded towards zero and negative values are rounded away from 0). 
     */
    function conservativePreciseDiv(int256 a, int256 b) internal pure returns (int256) {
        return divDown(a.mul(PRECISE_UNIT_INT), b);
    }

    /**
    * @dev Performs the power on a specified value, reverts on overflow.
    */
    function safePower(
        uint256 a,
        uint256 pow
    )
        internal
        pure
        returns (uint256)
    {
        require(a > 0, "Value must be positive");

        uint256 result = 1;
        for (uint256 i = 0; i < pow; i++){
            uint256 previousResult = result;

            // Using safemath multiplication prevents overflows
            result = previousResult.mul(a);
        }

        return result;
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

/**
 * @title StringArrayUtils
 * @author Set Protocol
 *
 * Utility functions to handle String Arrays
 */
library StringArrayUtils {

    /**
     * Finds the index of the first occurrence of the given element.
     * @param A The input string to search
     * @param a The value to find
     * @return Returns (index and isIn) for the first occurrence starting from index 0
     */
    function indexOf(string[] memory A, string memory a) internal pure returns (uint256, bool) {
        uint256 length = A.length;
        for (uint256 i = 0; i < length; i++) {
            if (keccak256(bytes(A[i])) == keccak256(bytes(a))) {
                return (i, true);
            }
        }
        return (uint256(-1), false);
    }

    /**
     * @param A The input array to search
     * @param a The string to remove
     */
    function removeStorage(string[] storage A, string memory a)
        internal
    {
        (uint256 index, bool isIn) = indexOf(A, a);
        if (!isIn) {
            revert("String not in array.");
        } else {
            uint256 lastIndex = A.length - 1; // If the array would be empty, the previous line would throw, so no underflow here
            if (index != lastIndex) { A[index] = A[lastIndex]; }
            A.pop();
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;


/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value < 2**128, "SafeCast: value doesn\'t fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value < 2**64, "SafeCast: value doesn\'t fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value < 2**32, "SafeCast: value doesn\'t fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value < 2**16, "SafeCast: value doesn\'t fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value < 2**8, "SafeCast: value doesn\'t fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= -2**127 && value < 2**127, "SafeCast: value doesn\'t fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= -2**63 && value < 2**63, "SafeCast: value doesn\'t fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= -2**31 && value < 2**31, "SafeCast: value doesn\'t fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= -2**15 && value < 2**15, "SafeCast: value doesn\'t fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= -2**7 && value < 2**7, "SafeCast: value doesn\'t fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        require(value < 2**255, "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

/**
 * @title AddressArrayUtils
 * @author Set Protocol
 *
 * Utility functions to handle Address Arrays
 *
 * CHANGELOG:
 * - 4/27/21: Added validatePairsWithArray methods
 */
library AddressArrayUtils {

    /**
     * Finds the index of the first occurrence of the given element.
     * @param A The input array to search
     * @param a The value to find
     * @return Returns (index and isIn) for the first occurrence starting from index 0
     */
    function indexOf(address[] memory A, address a) internal pure returns (uint256, bool) {
        uint256 length = A.length;
        for (uint256 i = 0; i < length; i++) {
            if (A[i] == a) {
                return (i, true);
            }
        }
        return (uint256(-1), false);
    }

    /**
    * Returns true if the value is present in the list. Uses indexOf internally.
    * @param A The input array to search
    * @param a The value to find
    * @return Returns isIn for the first occurrence starting from index 0
    */
    function contains(address[] memory A, address a) internal pure returns (bool) {
        (, bool isIn) = indexOf(A, a);
        return isIn;
    }

    /**
    * Returns true if there are 2 elements that are the same in an array
    * @param A The input array to search
    * @return Returns boolean for the first occurrence of a duplicate
    */
    function hasDuplicate(address[] memory A) internal pure returns(bool) {
        require(A.length > 0, "A is empty");

        for (uint256 i = 0; i < A.length - 1; i++) {
            address current = A[i];
            for (uint256 j = i + 1; j < A.length; j++) {
                if (current == A[j]) {
                    return true;
                }
            }
        }
        return false;
    }

    /**
     * @param A The input array to search
     * @param a The address to remove
     * @return Returns the array with the object removed.
     */
    function remove(address[] memory A, address a)
        internal
        pure
        returns (address[] memory)
    {
        (uint256 index, bool isIn) = indexOf(A, a);
        if (!isIn) {
            revert("Address not in array.");
        } else {
            (address[] memory _A,) = pop(A, index);
            return _A;
        }
    }

    /**
     * @param A The input array to search
     * @param a The address to remove
     */
    function removeStorage(address[] storage A, address a)
        internal
    {
        (uint256 index, bool isIn) = indexOf(A, a);
        if (!isIn) {
            revert("Address not in array.");
        } else {
            uint256 lastIndex = A.length - 1; // If the array would be empty, the previous line would throw, so no underflow here
            if (index != lastIndex) { A[index] = A[lastIndex]; }
            A.pop();
        }
    }

    /**
    * Removes specified index from array
    * @param A The input array to search
    * @param index The index to remove
    * @return Returns the new array and the removed entry
    */
    function pop(address[] memory A, uint256 index)
        internal
        pure
        returns (address[] memory, address)
    {
        uint256 length = A.length;
        require(index < A.length, "Index must be < A length");
        address[] memory newAddresses = new address[](length - 1);
        for (uint256 i = 0; i < index; i++) {
            newAddresses[i] = A[i];
        }
        for (uint256 j = index + 1; j < length; j++) {
            newAddresses[j - 1] = A[j];
        }
        return (newAddresses, A[index]);
    }

    /**
     * Returns the combination of the two arrays
     * @param A The first array
     * @param B The second array
     * @return Returns A extended by B
     */
    function extend(address[] memory A, address[] memory B) internal pure returns (address[] memory) {
        uint256 aLength = A.length;
        uint256 bLength = B.length;
        address[] memory newAddresses = new address[](aLength + bLength);
        for (uint256 i = 0; i < aLength; i++) {
            newAddresses[i] = A[i];
        }
        for (uint256 j = 0; j < bLength; j++) {
            newAddresses[aLength + j] = B[j];
        }
        return newAddresses;
    }

    /**
     * Validate that address and uint array lengths match. Validate address array is not empty
     * and contains no duplicate elements.
     *
     * @param A         Array of addresses
     * @param B         Array of uint
     */
    function validatePairsWithArray(address[] memory A, uint[] memory B) internal pure {
        require(A.length == B.length, "Array length mismatch");
        _validateLengthAndUniqueness(A);
    }

    /**
     * Validate that address and bool array lengths match. Validate address array is not empty
     * and contains no duplicate elements.
     *
     * @param A         Array of addresses
     * @param B         Array of bool
     */
    function validatePairsWithArray(address[] memory A, bool[] memory B) internal pure {
        require(A.length == B.length, "Array length mismatch");
        _validateLengthAndUniqueness(A);
    }

    /**
     * Validate that address and string array lengths match. Validate address array is not empty
     * and contains no duplicate elements.
     *
     * @param A         Array of addresses
     * @param B         Array of strings
     */
    function validatePairsWithArray(address[] memory A, string[] memory B) internal pure {
        require(A.length == B.length, "Array length mismatch");
        _validateLengthAndUniqueness(A);
    }

    /**
     * Validate that address array lengths match, and calling address array are not empty
     * and contain no duplicate elements.
     *
     * @param A         Array of addresses
     * @param B         Array of addresses
     */
    function validatePairsWithArray(address[] memory A, address[] memory B) internal pure {
        require(A.length == B.length, "Array length mismatch");
        _validateLengthAndUniqueness(A);
    }

    /**
     * Validate that address and bytes array lengths match. Validate address array is not empty
     * and contains no duplicate elements.
     *
     * @param A         Array of addresses
     * @param B         Array of bytes
     */
    function validatePairsWithArray(address[] memory A, bytes[] memory B) internal pure {
        require(A.length == B.length, "Array length mismatch");
        _validateLengthAndUniqueness(A);
    }

    /**
     * Validate address array is not empty and contains no duplicate elements.
     *
     * @param A          Array of addresses
     */
    function _validateLengthAndUniqueness(address[] memory A) internal pure {
        require(A.length > 0, "Array length must be > 0");
        require(!hasDuplicate(A), "Cannot duplicate addresses");
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @title SignedSafeMath
 * @dev Signed math operations with safety checks that revert on error.
 */
library SignedSafeMath {
    int256 constant private _INT256_MIN = -2**255;

    /**
     * @dev Returns the multiplication of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(int256 a, int256 b) internal pure returns (int256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        require(!(a == -1 && b == _INT256_MIN), "SignedSafeMath: multiplication overflow");

        int256 c = a * b;
        require(c / a == b, "SignedSafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two signed integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(int256 a, int256 b) internal pure returns (int256) {
        require(b != 0, "SignedSafeMath: division by zero");
        require(!(b == -1 && a == _INT256_MIN), "SignedSafeMath: division overflow");

        int256 c = a / b;

        return c;
    }

    /**
     * @dev Returns the subtraction of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a - b;
        require((b >= 0 && c <= a) || (b < 0 && c > a), "SignedSafeMath: subtraction overflow");

        return c;
    }

    /**
     * @dev Returns the addition of two signed integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a + b;
        require((b >= 0 && c >= a) || (b < 0 && c < a), "SignedSafeMath: addition overflow");

        return c;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity ^0.6.10;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { IIndexModule } from "../interfaces/IIndexModule.sol";
import { IStreamingFeeModule } from "../interfaces/IStreamingFeeModule.sol";
import { MutualUpgrade } from "../lib/MutualUpgrade.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { TimeLockUpgrade } from "../lib/TimeLockUpgrade.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";

contract ICManager is TimeLockUpgrade, MutualUpgrade {
    using Address for address;
    using SafeMath for uint256;
    using PreciseUnitMath for uint256;

    /* ============ Events ============ */

    event FeesAccrued(
        uint256 _totalFees,
        uint256 _operatorTake,
        uint256 _methodologistTake
    );

    /* ============ Modifiers ============ */

    /**
     * Throws if the sender is not the SetToken operator
     */
    modifier onlyOperator() {
        require(msg.sender == operator, "Must be operator");
        _;
    }

    /**
     * Throws if the sender is not the SetToken methodologist
     */
    modifier onlyMethodologist() {
        require(msg.sender == methodologist, "Must be methodologist");
        _;
    }

    /* ============ State Variables ============ */

    // Instance of SetToken
    ISetToken public setToken;

    // Address of IndexModule for managing rebalances
    IIndexModule public indexModule;

    // Address of StreamingFeeModule
    IStreamingFeeModule public feeModule;

    // Address of operator
    address public operator;

    // Address of methodologist
    address public methodologist;

    // Percent in 1e18 of streamingFees sent to operator
    uint256 public operatorFeeSplit;

    /* ============ Constructor ============ */

    constructor(
        ISetToken _setToken,
        IIndexModule _indexModule,
        IStreamingFeeModule _feeModule,
        address _operator,
        address _methodologist,
        uint256 _operatorFeeSplit
    )
        public
    {
        require(
            _operatorFeeSplit <= PreciseUnitMath.preciseUnit(),
            "Operator Fee Split must be less than 1e18"
        );

        setToken = _setToken;
        indexModule = _indexModule;
        feeModule = _feeModule;
        operator = _operator;
        methodologist = _methodologist;
        operatorFeeSplit = _operatorFeeSplit;
    }

    /* ============ External Functions ============ */

    /**
     * OPERATOR ONLY: Start rebalance in IndexModule. Set new target units, zeroing out any units for components being removed from index.
     * Log position multiplier to adjust target units in case fees are accrued.
     *
     * @param _newComponents                    Array of new components to add to allocation
     * @param _newComponentsTargetUnits         Array of target units at end of rebalance for new components, maps to same index of component
     * @param _oldComponentsTargetUnits         Array of target units at end of rebalance for old component, maps to same index of component,
     *                                              if component being removed set to 0.
     * @param _positionMultiplier               Position multiplier when target units were calculated, needed in order to adjust target units
     *                                              if fees accrued
     */
    function startRebalance(
        address[] calldata _newComponents,
        uint256[] calldata _newComponentsTargetUnits,
        uint256[] calldata _oldComponentsTargetUnits,
        uint256 _positionMultiplier
    )
        external
        onlyOperator
    {
        indexModule.startRebalance(_newComponents, _newComponentsTargetUnits, _oldComponentsTargetUnits, _positionMultiplier);
    }

    /**
     * OPERATOR ONLY: Set trade maximums for passed components
     *
     * @param _components            Array of components
     * @param _tradeMaximums         Array of trade maximums mapping to correct component
     */
    function setTradeMaximums(
        address[] calldata _components,
        uint256[] calldata _tradeMaximums
    )
        external
        onlyOperator
    {
        indexModule.setTradeMaximums(_components, _tradeMaximums);
    }

    /**
     * OPERATOR ONLY: Set exchange for passed components
     *
     * @param _components        Array of components
     * @param _exchanges         Array of exchanges mapping to correct component, uint256 used to signify exchange
     */
    function setAssetExchanges(
        address[] calldata _components,
        uint256[] calldata _exchanges
    )
        external
        onlyOperator
    {
        indexModule.setExchanges(_components, _exchanges);
    }

    /**
     * OPERATOR ONLY: Set exchange for passed components
     *
     * @param _components           Array of components
     * @param _coolOffPeriods       Array of cool off periods to correct component
     */
    function setCoolOffPeriods(
        address[] calldata _components,
        uint256[] calldata _coolOffPeriods
    )
        external
        onlyOperator
    {
        indexModule.setCoolOffPeriods(_components, _coolOffPeriods);
    }

    /**
     * OPERATOR ONLY: Toggle ability for passed addresses to trade from current state
     *
     * @param _traders           Array trader addresses to toggle status
     * @param _statuses          Booleans indicating if matching trader can trade
     */
    function updateTraderStatus(
        address[] calldata _traders,
        bool[] calldata _statuses
    )
        external
        onlyOperator
    {
        indexModule.updateTraderStatus(_traders, _statuses);
    }

    /**
     * OPERATOR ONLY: Toggle whether anyone can trade, bypassing the traderAllowList
     *
     * @param _status           Boolean indicating if anyone can trade
     */
    function updateAnyoneTrade(bool _status) external onlyOperator {
        indexModule.updateAnyoneTrade(_status);
    }

    /**
     * Accrue fees from streaming fee module and transfer tokens to operator / methodologist addresses based on fee split
     */
    function accrueFeeAndDistribute() public {
        feeModule.accrueFee(setToken);

        uint256 setTokenBalance = setToken.balanceOf(address(this));

        uint256 operatorTake = setTokenBalance.preciseMul(operatorFeeSplit);
        uint256 methodologistTake = setTokenBalance.sub(operatorTake);

        setToken.transfer(operator, operatorTake);

        setToken.transfer(methodologist, methodologistTake);

        emit FeesAccrued(setTokenBalance, operatorTake, methodologistTake);
    }

    /**
     * OPERATOR OR METHODOLOGIST ONLY: Update the SetToken manager address. Operator and Methodologist must each call
     * this function to execute the update.
     *
     * @param _newManager           New manager address
     */
    function updateManager(address _newManager) external mutualUpgrade(operator, methodologist) {
        setToken.setManager(_newManager);
    }

    /**
     * OPERATOR ONLY: Add a new module to the SetToken.
     *
     * @param _module           New module to add
     */
    function addModule(address _module) external onlyOperator {
        setToken.addModule(_module);
    }

    /**
     * OPERATOR ONLY: Interact with a module registered on the SetToken. Cannot be used to call functions in the
     * fee module, due to ability to bypass methodologist permissions to update streaming fee.
     *
     * @param _module           Module to interact with
     * @param _data             Byte data of function to call in module
     */
    function interactModule(address _module, bytes calldata _data) external onlyOperator {
        require(_module != address(feeModule), "Must not be fee module");

        // Invoke call to module, assume value will always be 0
        _module.functionCallWithValue(_data, 0);
    }

    /**
     * OPERATOR ONLY: Remove a new module from the SetToken.
     *
     * @param _module           Module to remove
     */
    function removeModule(address _module) external onlyOperator {
        setToken.removeModule(_module);
    }

    /**
     * METHODOLOGIST ONLY: Update the streaming fee for the SetToken. Subject to timelock period agreed upon by the
     * operator and methodologist
     *
     * @param _newFee           New streaming fee percentage
     */
    function updateStreamingFee(uint256 _newFee) external timeLockUpgrade onlyMethodologist {
        feeModule.updateStreamingFee(setToken, _newFee);
    }

    /**
     * OPERATOR OR METHODOLOGIST ONLY: Update the fee recipient address. Operator and Methodologist must each call
     * this function to execute the update.
     *
     * @param _newFeeRecipient           New fee recipient address
     */
    function updateFeeRecipient(address _newFeeRecipient) external mutualUpgrade(operator, methodologist) {
        feeModule.updateFeeRecipient(setToken, _newFeeRecipient);
    }

    /**
     * OPERATOR OR METHODOLOGIST ONLY: Update the fee split percentage. Operator and Methodologist must each call
     * this function to execute the update.
     *
     * @param _newFeeSplit           New fee split percentage
     */
    function updateFeeSplit(uint256 _newFeeSplit) external mutualUpgrade(operator, methodologist) {
        require(
            _newFeeSplit <= PreciseUnitMath.preciseUnit(),
            "Operator Fee Split must be less than 1e18"
        );

        // Accrue fee to operator and methodologist prior to new fee split
        accrueFeeAndDistribute();
        operatorFeeSplit = _newFeeSplit;
    }

    /**
     * OPERATOR ONLY: Update the index module
     *
     * @param _newIndexModule           New index module
     */
    function updateIndexModule(IIndexModule _newIndexModule) external onlyOperator {
        indexModule = _newIndexModule;
    }

    /**
     * METHODOLOGIST ONLY: Update the methodologist address
     *
     * @param _newMethodologist           New methodologist address
     */
    function updateMethodologist(address _newMethodologist) external onlyMethodologist {
        methodologist = _newMethodologist;
    }

    /**
     * OPERATOR ONLY: Update the operator address
     *
     * @param _newOperator           New operator address
     */
    function updateOperator(address _newOperator) external onlyOperator {
        operator = _newOperator;
    }

    /**
     * OPERATOR OR METHODOLOGIST ONLY: Update the timelock period for updating the streaming fee percentage.
     * Operator and Methodologist must each call this function to execute the update.
     *
     * @param _newTimeLockPeriod           New timelock period in seconds
     */
    function setTimeLockPeriod(uint256 _newTimeLockPeriod) external override mutualUpgrade(operator, methodologist) {
        timeLockPeriod = _newTimeLockPeriod;
    }
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { ISetToken } from "./ISetToken.sol";

interface IIndexModule {
    function startRebalance(
        address[] calldata _newComponents,
        uint256[] calldata _newComponentsTargetUnits,
        uint256[] calldata _oldComponentsTargetUnits,
        uint256 _positionMultiplier
    ) external;

    function setTradeMaximums(
        address[] calldata _components,
        uint256[] calldata _tradeMaximums
    ) external;

    function setExchanges(
        address[] calldata _components,
        uint256[] calldata _exchanges
    ) external;

    function setCoolOffPeriods(
        address[] calldata _components,
        uint256[] calldata _coolOffPeriods
    ) external;

    function updateTraderStatus(address[] calldata _traders, bool[] calldata _statuses) external;

    function updateAnyoneTrade(bool _status) external;
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { ISetToken } from "./ISetToken.sol";

interface IStreamingFeeModule {
    struct FeeState {
        address feeRecipient;
        uint256 maxStreamingFeePercentage;
        uint256 streamingFeePercentage;
        uint256 lastStreamingFeeTimestamp;
    }

    function getFee(ISetToken _setToken) external view returns (uint256);
    function accrueFee(ISetToken _setToken) external;
    function updateStreamingFee(ISetToken _setToken, uint256 _newFee) external;
    function updateFeeRecipient(ISetToken _setToken, address _newFeeRecipient) external;
    function initialize(ISetToken _setToken, FeeState memory _settings) external;
}

/*
    Copyright 2018 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

/**
 * @title MutualUpgrade
 * @author Set Protocol
 *
 * The MutualUpgrade contract contains a modifier for handling mutual upgrades between two parties
 */
contract MutualUpgrade {
    /* ============ State Variables ============ */

    // Mapping of upgradable units and if upgrade has been initialized by other party
    mapping(bytes32 => bool) public mutualUpgrades;

    /* ============ Events ============ */

    event MutualUpgradeRegistered(
        bytes32 _upgradeHash
    );

    /* ============ Modifiers ============ */

    modifier mutualUpgrade(address _signerOne, address _signerTwo) {
        require(
            msg.sender == _signerOne || msg.sender == _signerTwo,
            "Must be authorized address"
        );

        address nonCaller = _getNonCaller(_signerOne, _signerTwo);

        // The upgrade hash is defined by the hash of the transaction call data and sender of msg,
        // which uniquely identifies the function, arguments, and sender.
        bytes32 expectedHash = keccak256(abi.encodePacked(msg.data, nonCaller));

        if (!mutualUpgrades[expectedHash]) {
            bytes32 newHash = keccak256(abi.encodePacked(msg.data, msg.sender));

            mutualUpgrades[newHash] = true;

            emit MutualUpgradeRegistered(newHash);

            return;
        }

        delete mutualUpgrades[expectedHash];

        // Run the rest of the upgrades
        _;
    }

    /* ============ Internal Functions ============ */

    function _getNonCaller(address _signerOne, address _signerTwo) internal view returns(address) {
        return msg.sender == _signerOne ? _signerTwo : _signerOne;
    }
}

/*
    Copyright 2018 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

/**
 * @title TimeLockUpgrade
 * @author Set Protocol
 *
 * The TimeLockUpgrade contract contains a modifier for handling minimum time period updates
 */
contract TimeLockUpgrade is
    Ownable
{
    using SafeMath for uint256;

    /* ============ State Variables ============ */

    // Timelock Upgrade Period in seconds
    uint256 public timeLockPeriod;

    // Mapping of upgradable units and initialized timelock
    mapping(bytes32 => uint256) public timeLockedUpgrades;

    /* ============ Events ============ */

    event UpgradeRegistered(
        bytes32 _upgradeHash,
        uint256 _timestamp
    );

    /* ============ Modifiers ============ */

    modifier timeLockUpgrade() {
        // If the time lock period is 0, then allow non-timebound upgrades.
        // This is useful for initialization of the protocol and for testing.
        if (timeLockPeriod == 0) {
            _;

            return;
        }

        // The upgrade hash is defined by the hash of the transaction call data,
        // which uniquely identifies the function as well as the passed in arguments.
        bytes32 upgradeHash = keccak256(
            abi.encodePacked(
                msg.data
            )
        );

        uint256 registrationTime = timeLockedUpgrades[upgradeHash];

        // If the upgrade hasn't been registered, register with the current time.
        if (registrationTime == 0) {
            timeLockedUpgrades[upgradeHash] = block.timestamp;

            emit UpgradeRegistered(
                upgradeHash,
                block.timestamp
            );

            return;
        }

        require(
            block.timestamp >= registrationTime.add(timeLockPeriod),
            "TimeLockUpgrade: Time lock period must have elapsed."
        );

        // Reset the timestamp to 0
        timeLockedUpgrades[upgradeHash] = 0;

        // Run the rest of the upgrades
        _;
    }

    /* ============ Function ============ */

    /**
     * Change timeLockPeriod period. Generally called after initially settings have been set up.
     *
     * @param  _timeLockPeriod   Time in seconds that upgrades need to be evaluated before execution
     */
    function setTimeLockPeriod(
        uint256 _timeLockPeriod
    )
        virtual
        external
        onlyOwner
    {
        // Only allow setting of the timeLockPeriod if the period is greater than the existing
        require(
            _timeLockPeriod > timeLockPeriod,
            "TimeLockUpgrade: New period must be greater than existing"
        );

        timeLockPeriod = _timeLockPeriod;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/Context.sol";

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { IQuoter } from "../interfaces/IQuoter.sol";
import { IUniswapV3SwapCallback } from "../interfaces/IUniswapV3SwapCallback.sol";
import { ISwapRouter} from "../interfaces/external/ISwapRouter.sol";
import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { Context } from "@openzeppelin/contracts/GSN/Context.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { SignedSafeMath } from "@openzeppelin/contracts/math/SignedSafeMath.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { TransferHelper } from "../lib/TransferHelper.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { IDebtIssuanceModule } from "../interfaces/IDebtIssuanceModule.sol";
import { ISlippageIssuanceModule } from "../interfaces/ISlippageIssuanceModule.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { Withdrawable } from "external/contracts/aaveV2/utils/Withdrawable.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/SafeCast.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";


/**
 * @title FlashMintPerp
 *
 * Flash issue basis trading products using SlippageIssuanceModule
 *
 */
contract FlashMintPerp is Withdrawable {
    using PreciseUnitMath for uint256;
    using SafeMath for uint256;
    using SafeCast for int256;


    ////////////// State //////////////

    ISlippageIssuanceModule public immutable slippageIssuanceModule;
    ISwapRouter public immutable uniV3Router;
    IQuoter public immutable uniV3Quoter;
    IERC20 public immutable usdc;
    mapping (ISetToken => SetPoolInfo) public setPoolInfo;
    mapping(ISetToken => bool) public initializedSets;

    ////////////// Structs //////////////

    struct SetPoolInfo {
        bytes spotToUsdcRoute;
        address spotToken;
    }

    ////////////// Constructor //////////////

    constructor(
        ISwapRouter _uniV3Router,
        IQuoter _uniV3Quoter,
        ISlippageIssuanceModule _slippageIssuanceModule,
        IERC20 _usdc
    ) 
        public
    {
        uniV3Router = _uniV3Router;
        uniV3Quoter = _uniV3Quoter;
        slippageIssuanceModule = _slippageIssuanceModule;
        usdc = _usdc;

        // Approve USDC to SlippageIssuanceModule
        _usdc.approve(address(_slippageIssuanceModule), PreciseUnitMath.maxUint256());

        // Approve USDC
        _usdc.approve(address(_uniV3Router), PreciseUnitMath.maxUint256());
    }

    ///////////// Modifier ///////////////

    modifier isInitializedSet(ISetToken _setToken) {
        require(initializedSets[_setToken], "Set not initialized");
        _;
    }

    ////////// Helper functions /////////////

    /**
     * @dev Approve specific amount of token to spender
     *
     * @param _token    Address of the token which needs approval
     * @param _spender  Address of the spender which will be approved to spend token. (Must be a whitlisted issuance module)
     * @param _amount   The amount of tokens to approve
     */
    function approve(address _token, address _spender, uint256 _amount) external onlyOwner {
        TransferHelper.safeApprove(_token, _spender, _amount);
    }

    /**
     * @dev Enable the SetToken issuance 
     *
     * @param _setToken         Address of the SetToken to be issued
     * @param _spotToUsdcRoute  Uniswap V3 Path to be used for exchange
     * @param _spotToken        Address of the spot token
     */
    function initializeSet(
        ISetToken _setToken,
        bytes calldata _spotToUsdcRoute,
        address _spotToken
    )
        external
        onlyOwner
    {
        // Approve spot token to V3 and SIM
        TransferHelper.safeApprove(_spotToken, address(uniV3Router), PreciseUnitMath.maxUint256());
        TransferHelper.safeApprove(_spotToken, address(slippageIssuanceModule), PreciseUnitMath.maxUint256());

        // Store SetToken pool data in mapping
        setPoolInfo[_setToken] = SetPoolInfo({
            spotToUsdcRoute: _spotToUsdcRoute,
            spotToken: _spotToken
        });

        initializedSets[_setToken] = true;
    }

    /**
     * @dev Disable the SetToken issuance 
     *
     * @param _setToken         Address of the SetToken to be issued
     */
    function removeSet(ISetToken _setToken) external onlyOwner {
        delete setPoolInfo[_setToken];
        initializedSets[_setToken] = false;
    }

    ///////////////// Getter Functions /////////////////////

    /**
     * Returns USDC amount required for issuance
     *
     * @param _setToken     Address of the SetToken
     * @param _amountOut    The issuance amount of the SetToken
     */
    function getUsdcAmountInForFixedSetOffChain(
        ISetToken _setToken,
        uint256 _amountOut
    )
        external
        returns (uint256 totalUsdcAmountIn)
    {
        // Get units and components
        (
            address[] memory slippageIssuanceComponents,
            uint256[] memory slippageIssuanceUnits,
        ) = slippageIssuanceModule.getRequiredComponentIssuanceUnitsOffChain(
            _setToken,
            _amountOut
        );

        // Assert assumptions
        require(slippageIssuanceComponents.length <= 2, "invalid set");

        // calculate total usdc amount in and usdcForSpot
        for (uint256 i = 0; i < slippageIssuanceComponents.length; i++) {

            if (slippageIssuanceComponents[i] == address(usdc)) {

                totalUsdcAmountIn = totalUsdcAmountIn.add(slippageIssuanceUnits[i]);

            } else {

                uint256 usdcForSpot = uniV3Quoter.quoteExactOutput(
                    setPoolInfo[_setToken].spotToUsdcRoute,
                    slippageIssuanceUnits[i].add(1) // Add 1 wei
                );
                totalUsdcAmountIn = totalUsdcAmountIn.add(usdcForSpot);
            }
        }
    }

    /**
     * Returns USDC amount required for redemption
     *
     * @param _setToken     Address of the SetToken
     * @param _amountIn     The redeem amount of the SetToken
     */
    function getUsdcAmountOutForFixedSetOffChain(
        ISetToken _setToken,
        uint256 _amountIn
    )
        external
        returns (uint256 totalUsdcAmountOut)
    {
        // Get underlying spot and usdc units
        (
            address[] memory slippageIssuanceComponents,
            uint256[] memory slippageIssuanceUnits,
        ) = slippageIssuanceModule.getRequiredComponentRedemptionUnitsOffChain(
            _setToken,
            _amountIn
        );

        // Assert assumptions
        require(slippageIssuanceComponents.length <= 2, "invalid set");

        // calculate total usdc amount in and usdcFromSpot
        for (uint256 i = 0; i <  slippageIssuanceComponents.length; i++) {
            if (slippageIssuanceComponents[i] == address(usdc)) {

                totalUsdcAmountOut = totalUsdcAmountOut.add(slippageIssuanceUnits[i]);

            } else {

                uint256 usdcFromSpot = uniV3Quoter.quoteExactInput(
                    setPoolInfo[_setToken].spotToUsdcRoute,
                    slippageIssuanceUnits[i].sub(1) // Leave 1 wei
                );
                totalUsdcAmountOut = totalUsdcAmountOut.add(usdcFromSpot);
            }
        }
    }

    //////////////// External Functions ////////////////////

    /**
     * Issue expected amount of SetToken using USDC
     *
     * @param _setToken     Address of the SetToken
     * @param _amount       The expected issuance amount of the SetToken
     * @param _maxAmountIn  The maximum input amount of USDC
     */
    function issueFixedSetFromUsdc(
        ISetToken _setToken,
        uint256 _amount,
        uint256 _maxAmountIn
    )
        external
        isInitializedSet(_setToken)
    {
        // Transfer max amount in
        TransferHelper.safeTransferFrom(address(usdc), msg.sender, address(this), _maxAmountIn);

        // calculate spot asset quantity
        uint256 spotAssetQuantity = _spotAssetQuantity(_setToken, _amount);

        // Trade USDC for exact spot token
        ISwapRouter.ExactOutputParams memory spotTokenParams = ISwapRouter.ExactOutputParams(
            setPoolInfo[_setToken].spotToUsdcRoute,
            address(this),
            block.timestamp,
            spotAssetQuantity.add(1), // Add 1 wei
            PreciseUnitMath.maxUint256() // No need for slippage check
        );

        // Executes the swap
        uniV3Router.exactOutput(spotTokenParams);

        // Issue Set with spot tokens and USDC
        slippageIssuanceModule.issueWithSlippage(
            _setToken,
            _amount,
            new address[](0), // No need to check for slippage cause L2; If not enough USDC then issue would fail
            new uint256[](0),
            msg.sender
        );

        // Return unused USDC
        uint256 usdcBalance = usdc.balanceOf(address(this));
        TransferHelper.safeTransfer(address(usdc), msg.sender, usdcBalance);
    }

    /**
     * Redeem expected amount of SetToken using USDC
     *
     * @param _setToken         Address of the SetToken
     * @param _amount           The expected redeem amount of the SetToken
     * @param _minAmountOut     The minimum output amount of USDC
     */
    function redeemFixedSetForUsdc(
        ISetToken _setToken,
        uint256 _amount,
        uint256 _minAmountOut
    )
        external
        isInitializedSet(_setToken)
    {

        TransferHelper.safeTransferFrom(address(_setToken), msg.sender, address(this), _amount);

        // Redeem Set to spot tokens and USDC
        slippageIssuanceModule.redeemWithSlippage(
            _setToken,
            _amount,
            new address[](0), // No need to check for slippage as there is no risk of sandwiching due to flashloans
            new uint256[](0),
            address(this)
        );

        // calculate spot asset quantity
        uint256 spotAssetQuantity = _spotAssetQuantity(_setToken, _amount);

        // check with actual spot token balance
        uint256 spotTokenBalance = IERC20(setPoolInfo[_setToken].spotToken).balanceOf(address(this));
        if (spotAssetQuantity > spotTokenBalance) {
            spotAssetQuantity = spotTokenBalance;
        }

        ISwapRouter.ExactInputParams memory spotTokenParams = ISwapRouter.ExactInputParams(
            setPoolInfo[_setToken].spotToUsdcRoute,
            address(this),
            block.timestamp,
            spotAssetQuantity.sub(1), // Leave 1 wei
            0 // No need for slippage check
        );

        // Executes the swap
        uniV3Router.exactInput(spotTokenParams);

        // Return the USDC
        uint256 usdcBalance = usdc.balanceOf(address(this));

        require(usdcBalance >= _minAmountOut, "Not enough USDC");

        TransferHelper.safeTransfer(address(usdc), msg.sender, usdcBalance);
    }


    /////////////// Internal functions //////////////////

    function _spotAssetQuantity(ISetToken _setToken, uint256 _amount) internal view returns (uint256) {
        address spotAsset = setPoolInfo[_setToken].spotToken;

        uint256 spotAssetQuantity = _setToken
            .getDefaultPositionRealUnit(spotAsset)
            .toUint256()
            .preciseMul(_amount);

        return spotAssetQuantity;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

/// @title Quoter Interface
/// @notice Supports quoting the calculated amounts from exact input or exact output swaps
/// @dev These functions are not marked view because they rely on calling non-view functions and reverting
/// to compute the result. They are also not gas efficient and should not be called on-chain.
interface IQuoter {
    /// @notice Returns the amount out received for a given exact input swap without executing the swap
    /// @param path The path of the swap, i.e. each token pair and the pool fee
    /// @param amountIn The amount of the first token to swap
    /// @return amountOut The amount of the last token that would be received
    function quoteExactInput(bytes memory path, uint256 amountIn) external returns (uint256 amountOut);

    /// @notice Returns the amount out received for a given exact input but for a swap of a single pool
    /// @param tokenIn The token being swapped in
    /// @param tokenOut The token being swapped out
    /// @param fee The fee of the token pool to consider for the pair
    /// @param amountIn The desired input amount
    /// @param sqrtPriceLimitX96 The price limit of the pool that cannot be exceeded by the swap
    /// @return amountOut The amount of `tokenOut` that would be received
    function quoteExactInputSingle(
        address tokenIn,
        address tokenOut,
        uint24 fee,
        uint256 amountIn,
        uint160 sqrtPriceLimitX96
    ) external returns (uint256 amountOut);

    /// @notice Returns the amount in required for a given exact output swap without executing the swap
    /// @param path The path of the swap, i.e. each token pair and the pool fee. Path must be provided in reverse order
    /// @param amountOut The amount of the last token to receive
    /// @return amountIn The amount of first token required to be paid
    function quoteExactOutput(bytes memory path, uint256 amountOut) external returns (uint256 amountIn);

    /// @notice Returns the amount in required to receive the given exact output amount but for a swap of a single pool
    /// @param tokenIn The token being swapped in
    /// @param tokenOut The token being swapped out
    /// @param fee The fee of the token pool to consider for the pair
    /// @param amountOut The desired output amount
    /// @param sqrtPriceLimitX96 The price limit of the pool that cannot be exceeded by the swap
    /// @return amountIn The amount required as the input for the swap in order to receive `amountOut`
    function quoteExactOutputSingle(
        address tokenIn,
        address tokenOut,
        uint24 fee,
        uint256 amountOut,
        uint160 sqrtPriceLimitX96
    ) external returns (uint256 amountIn);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;


/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Uniswap V3
interface ISwapRouter {
    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactInpuSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);

    struct ExactInputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInput(ExactInputParams calldata params) external payable returns (uint256 amountOut);

    struct ExactOutputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutputSingle(ExactOutputSingleParams calldata params) external payable returns (uint256 amountIn);

    struct ExactOutputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutput(ExactOutputParams calldata params) external payable returns (uint256 amountIn);
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

library TransferHelper {
    /// @notice Transfers tokens from the targeted address to the given destination
    /// @notice Errors with 'STF' if transfer fails
    /// @param token The contract address of the token to be transferred
    /// @param from The originating address from which the tokens will be transferred
    /// @param to The destination address of the transfer
    /// @param value The amount to be transferred
    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.transferFrom.selector, from, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "STF");
    }

    /// @notice Transfers tokens from msg.sender to a recipient
    /// @dev Errors with ST if transfer fails
    /// @param token The contract address of the token which will be transferred
    /// @param to The recipient of the transfer
    /// @param value The value of the transfer
    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.transfer.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "ST");
    }

    /// @notice Approves the stipulated contract to spend the given allowance in the given token
    /// @dev Errors with 'SA' if transfer fails
    /// @param token The contract address of the token to be approved
    /// @param to The target of the approval
    /// @param value The amount of the given token the target will be allowed to spend
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(IERC20.approve.selector, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), "SA");
    }

    /// @notice Transfers ETH to the recipient address
    /// @dev Fails with `STE`
    /// @param to The destination of the transfer
    /// @param value The value to be transferred
    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, "STE");
    }
}

/*
    Copyright 2020 Set Labs Inc.
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity >=0.6.10;

import { ISetToken } from "./ISetToken.sol";
import { IManagerIssuanceHook } from "./IManagerIssuanceHook.sol";

interface IDebtIssuanceModule {
    function getRequiredComponentIssuanceUnits(
        ISetToken _setToken,
        uint256 _quantity
    ) external view returns (address[] memory, uint256[] memory, uint256[] memory);
    function getRequiredComponentRedemptionUnits(
        ISetToken _setToken,
        uint256 _quantity
    ) external view returns (address[] memory, uint256[] memory, uint256[] memory);
    function issue(ISetToken _setToken, uint256 _quantity, address _to) external;
    function redeem(ISetToken _token, uint256 _quantity, address _to) external;
    function initialize(
        ISetToken _setToken,
        uint256 _maxManagerFee,
        uint256 _managerIssueFee,
        uint256 _managerRedeemFee,
        address _feeRecipient,
        IManagerIssuanceHook _managerIssuanceHook
    ) external;
}

/*
    Copyright 2020 Set Labs Inc.
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity >=0.6.10;

import { IDebtIssuanceModule, ISetToken } from "./IDebtIssuanceModule.sol";

interface ISlippageIssuanceModule is IDebtIssuanceModule {

    function issueWithSlippage(
        ISetToken _setToken,
        uint256 _setQuantity,
        address[] memory _checkedComponents,
        uint256[] memory _maxTokenAmountsIn,
        address _to
    ) external;

    function redeemWithSlippage(
        ISetToken _setToken,
        uint256 _setQuantity,
        address[] memory _checkedComponents,
        uint256[] memory _minTokenAmountsOut,
        address _to
    ) external;

    function getRequiredComponentIssuanceUnitsOffChain(
        ISetToken _setToken,
        uint256 _quantity
    )
        external
        returns (address[] memory, uint256[] memory, uint256[] memory);

    function getRequiredComponentRedemptionUnitsOffChain(
        ISetToken _setToken,
        uint256 _quantity
    )
        external
        returns (address[] memory, uint256[] memory, uint256[] memory);
}

pragma solidity ^0.6.10;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

/**
    Ensures that any contract that inherits from this contract is able to
    withdraw funds that are accidentally received or stuck.
 */
 
contract Withdrawable is Ownable {
    using SafeERC20 for ERC20;
    address constant ETHER = address(0);

    event LogWithdraw(
        address indexed _from,
        address indexed _assetAddress,
        uint amount
    );

    /**
     * @dev Withdraw asset.
     * @param _assetAddress Asset to be withdrawn.
     */
    function withdraw(address _assetAddress) public onlyOwner {
        uint assetBalance;
        if (_assetAddress == ETHER) {
            address self = address(this); // workaround for a possible solidity bug
            assetBalance = self.balance;
            msg.sender.transfer(assetBalance);
        } else {
            assetBalance = ERC20(_assetAddress).balanceOf(address(this));
            ERC20(_assetAddress).safeTransfer(msg.sender, assetBalance);
        }
        emit LogWithdraw(msg.sender, _assetAddress, assetBalance);
    }
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;

import { ISetToken } from "./ISetToken.sol";

interface IManagerIssuanceHook {
    function invokePreIssueHook(ISetToken _setToken, uint256 _issueQuantity, address _sender, address _to) external;
    function invokePreRedeemHook(ISetToken _setToken, uint256 _redeemQuantity, address _sender, address _to) external;
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.8;

import { SafeMath } from '@openzeppelin/contracts/math/SafeMath.sol';
import { IERC20 } from '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import { SafeERC20 } from '@openzeppelin/contracts/token/ERC20/SafeERC20.sol';
import { IFlashLoanReceiverV2 } from './../../../contracts/interfaces/IFlashLoanReceiverV2.sol';
import { ILendingPoolAddressesProviderV2 } from './../../../contracts/interfaces/ILendingPoolAddressesProviderV2.sol';
import { ILendingPoolV2 } from './../../../contracts/interfaces/ILendingPoolV2.sol';
import "./utils/Withdrawable.sol";

/** 
    !!!
    Never keep funds permanently on your FlashLoanReceiverBase contract as they could be 
    exposed to a 'griefing' attack, where the stored funds are used by an attacker.
    !!!
 */
abstract contract FlashLoanReceiverBaseV2 is IFlashLoanReceiverV2 {
  using SafeERC20 for IERC20;
  using SafeMath for uint256;

  ILendingPoolAddressesProviderV2 public immutable override ADDRESSES_PROVIDER;
  ILendingPoolV2 public immutable override LENDING_POOL;

  constructor(address provider) public {
    ADDRESSES_PROVIDER = ILendingPoolAddressesProviderV2(provider);
    LENDING_POOL = ILendingPoolV2(ILendingPoolAddressesProviderV2(provider).getLendingPool());
  }

  receive() payable external {}
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.10;

import { ILendingPoolAddressesProviderV2 } from "./ILendingPoolAddressesProviderV2.sol";
import { ILendingPoolV2 } from "./ILendingPoolV2.sol";

/**
 * @title IFlashLoanReceiverV2 interface
 * @notice Interface for the Aave fee IFlashLoanReceiver.
 * @author Aave
 * @dev implement this interface to develop a flashloan-compatible flashLoanReceiver contract
 **/
interface IFlashLoanReceiverV2 {
  function executeOperation(
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata premiums,
    address initiator,
    bytes calldata params
  ) external returns (bool);

  function ADDRESSES_PROVIDER() external view returns (ILendingPoolAddressesProviderV2);

  function LENDING_POOL() external view returns (ILendingPoolV2);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.10;

/**
 * @title LendingPoolAddressesProvider contract
 * @dev Main registry of addresses part of or connected to the protocol, including permissioned roles
 * - Acting also as factory of proxies and admin of those, so with right to change its implementations
 * - Owned by the Aave Governance
 * @author Aave
 **/
interface ILendingPoolAddressesProviderV2 {
  event MarketIdSet(string newMarketId);
  event LendingPoolUpdated(address indexed newAddress);
  event ConfigurationAdminUpdated(address indexed newAddress);
  event EmergencyAdminUpdated(address indexed newAddress);
  event LendingPoolConfiguratorUpdated(address indexed newAddress);
  event LendingPoolCollateralManagerUpdated(address indexed newAddress);
  event PriceOracleUpdated(address indexed newAddress);
  event LendingRateOracleUpdated(address indexed newAddress);
  event ProxyCreated(bytes32 id, address indexed newAddress);
  event AddressSet(bytes32 id, address indexed newAddress, bool hasProxy);

  function getMarketId() external view returns (string memory);

  function setMarketId(string calldata marketId) external;

  function setAddress(bytes32 id, address newAddress) external;

  function setAddressAsProxy(bytes32 id, address impl) external;

  function getAddress(bytes32 id) external view returns (address);

  function getLendingPool() external view returns (address);

  function setLendingPoolImpl(address pool) external;

  function getLendingPoolConfigurator() external view returns (address);

  function setLendingPoolConfiguratorImpl(address configurator) external;

  function getLendingPoolCollateralManager() external view returns (address);

  function setLendingPoolCollateralManager(address manager) external;

  function getPoolAdmin() external view returns (address);

  function setPoolAdmin(address admin) external;

  function getEmergencyAdmin() external view returns (address);

  function setEmergencyAdmin(address admin) external;

  function getPriceOracle() external view returns (address);

  function setPriceOracle(address priceOracle) external;

  function getLendingRateOracle() external view returns (address);

  function setLendingRateOracle(address lendingRateOracle) external;
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.10;
pragma experimental ABIEncoderV2;

import {ILendingPoolAddressesProviderV2} from "./ILendingPoolAddressesProviderV2.sol";
import {DataTypes} from "../../external/contracts/aaveV2/lib/DataTypes.sol";

interface ILendingPoolV2 {
  /**
   * @dev Emitted on deposit()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the deposit
   * @param onBehalfOf The beneficiary of the deposit, receiving the aTokens
   * @param amount The amount deposited
   * @param referral The referral code used
   **/
  event Deposit(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referral
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlyng asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to Address that will receive the underlying
   * @param amount The amount to be withdrawn
   **/
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param borrowRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed
   * @param referral The referral code used
   **/
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint256 borrowRateMode,
    uint256 borrowRate,
    uint16 indexed referral
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   **/
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount
  );

  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param rateMode The rate mode that the user wants to swap to
   **/
  event Swap(address indexed reserve, address indexed user, uint256 rateMode);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   **/
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   **/
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   **/
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   **/
  event FlashLoan(
    address indexed target,
    address indexed initiator,
    address indexed asset,
    uint256 amount,
    uint256 premium,
    uint16 referralCode
  );

  /**
   * @dev Emitted when the pause is triggered.
   */
  event Paused();

  /**
   * @dev Emitted when the pause is lifted.
   */
  event Unpaused();

  /**
   * @dev Emitted when a borrower is liquidated. This event is emitted by the LendingPool via
   * LendingPoolCollateral manager using a DELEGATECALL
   * This allows to have the events in the generated ABI for LendingPool.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liiquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   **/
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated. NOTE: This event is actually declared
   * in the ReserveLogic library and emitted in the updateInterestRates() function. Since the function is internal,
   * the event will actually be fired by the LendingPool contract. The event is therefore replicated here so it
   * gets added to the LendingPool ABI
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The new liquidity rate
   * @param stableBorrowRate The new stable borrow rate
   * @param variableBorrowRate The new variable borrow rate
   * @param liquidityIndex The new liquidity index
   * @param variableBorrowIndex The new variable borrow index
   **/
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Deposits an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User deposits 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to deposit
   * @param amount The amount to be deposited
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   **/
  function deposit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @dev Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to Address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   **/
  function withdraw(
    address asset,
    uint256 amount,
    address to
  ) external returns (uint256);

  /**
   * @dev Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already deposited enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf Address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   **/
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param rateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   **/
  function repay(
    address asset,
    uint256 amount,
    uint256 rateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @dev Allows a borrower to swap his debt between stable and variable mode, or viceversa
   * @param asset The address of the underlying asset borrowed
   * @param rateMode The rate mode that the user wants to swap to
   **/
  function swapBorrowRateMode(address asset, uint256 rateMode) external;

  /**
   * @dev Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current deposit APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too much has been
   *        borrowed at a stable rate and depositors are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   **/
  function rebalanceStableBorrowRate(address asset, address user) external;

  /**
   * @dev Allows depositors to enable/disable a specific deposited asset as collateral
   * @param asset The address of the underlying asset deposited
   * @param useAsCollateral `true` if the user wants to use the deposit as collateral, `false` otherwise
   **/
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @dev Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   **/
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @dev Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept into consideration.
   * For further details please visit https://developers.aave.com
   * @param receiverAddress The address of the contract receiving the funds, implementing the IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts amounts being flash-borrowed
   * @param modes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   **/
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata modes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @dev Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralETH the total collateral in ETH of the user
   * @return totalDebtETH the total debt in ETH of the user
   * @return availableBorrowsETH the borrowing power left of the user
   * @return currentLiquidationThreshold the liquidation threshold of the user
   * @return ltv the loan to value of the user
   * @return healthFactor the current health factor of the user
   **/
  function getUserAccountData(address user)
    external
    view
    returns (
      uint256 totalCollateralETH,
      uint256 totalDebtETH,
      uint256 availableBorrowsETH,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  function initReserve(
    address reserve,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  function setReserveInterestRateStrategyAddress(address reserve, address rateStrategyAddress)
    external;

  function setConfiguration(address reserve, uint256 configuration) external;

  /**
   * @dev Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   **/
  function getConfiguration(address asset)
    external
    view
    returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @dev Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   **/
  function getUserConfiguration(address user)
    external
    view
    returns (DataTypes.UserConfigurationMap memory);

  /**
   * @dev Returns the normalized income normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @dev Returns the normalized variable debt per unit of asset
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @dev Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state of the reserve
   **/
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);

  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromAfter,
    uint256 balanceToBefore
  ) external;

  function getReservesList() external view returns (address[] memory);

  function getAddressesProvider() external view returns (ILendingPoolAddressesProviderV2);

  function setPause(bool val) external;

  function paused() external view returns (bool);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity ^0.6.10;

/**
 * @dev This is the Aave V2 DataTypes library.
 */
library DataTypes {
  // refer to the whitepaper, section 1.1 basic concepts for a formal description of these properties.
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    uint40 lastUpdateTimestamp;
    //tokens addresses
    address aTokenAddress;
    address stableDebtTokenAddress;
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint8 id;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: Reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: stable rate borrowing enabled
    //bit 60-63: reserved
    //bit 64-79: reserve factor
    uint256 data;
  }

  struct UserConfigurationMap {
    uint256 data;
  }

  enum InterestRateMode {NONE, STABLE, VARIABLE}
}

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Math } from "@openzeppelin/contracts/math/Math.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import { IAToken } from "../interfaces/IAToken.sol";
import { ICErc20 } from "../interfaces/ICErc20.sol";
import { ICompoundLeverageModule } from "../interfaces/ICompoundLeverageModule.sol";

import { ICErc20Delegator } from "../interfaces/ICErc20Delegator.sol";
import { ICEther } from "../interfaces/ICEther.sol";

import { CErc20Storage } from "../interfaces/CErc20Storage.sol";
import { CompoundLeverageModuleStorage } from "../interfaces/CompoundLeverageModuleStorage.sol";

import { IDebtIssuanceModule } from "../interfaces/IDebtIssuanceModule.sol";
import { IController } from "../interfaces/IController.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { IWETH } from "../interfaces/IWETH.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { UniSushiV2Library } from "../../external/contracts/UniSushiV2Library.sol";
import { FlashLoanReceiverBaseV2 } from "../../external/contracts/aaveV2/FlashLoanReceiverBaseV2.sol";
import { DEXAdapter } from "./DEXAdapter.sol";
import { Exponential } from "../lib/Exponential.sol";

/**
 * @title FlashMintLeveragedForCompound
 * @author Index Coop
 *
 * Contract for minting and redeeming a leveraged Set token.
 * Supports all tokens with one collateral Position in the form of a cToken and one debt position
 * The collateral underlying  must be available on an Aave flashloan.
 * The collateral and debt tokens must be available on Compound.
 * Input/Output tokens must be tradeable on supported dexes.
 */
contract FlashMintLeveragedForCompound is Exponential, ReentrancyGuard, FlashLoanReceiverBaseV2 {

    using DEXAdapter for DEXAdapter.Addresses;
    using Address for address payable;
    using SafeMath for uint256;
    using PreciseUnitMath for uint256;
    using SafeERC20 for IERC20;
    using SafeERC20 for ISetToken;

    /* ============ Structs ============ */

    struct LeveragedTokenData {
        address collateralCToken;
        uint256 cTokenAmount;
        address collateralToken;
        uint256 collateralAmount;
        address debtToken;
        uint256 debtAmount;
    }

    struct DecodedParams {
        ISetToken setToken;
        uint256 setAmount;
        address originalSender;
        bool isIssuance;
        address paymentToken;
        uint256 limitAmount;
        LeveragedTokenData leveragedTokenData;
        DEXAdapter.SwapData collateralAndDebtSwapData;
        DEXAdapter.SwapData paymentTokenSwapData;
    }

    /* ============ Constants ============= */

    uint256 constant private MAX_UINT256 = type(uint256).max;
    uint256 public constant ROUNDING_ERROR_MARGIN = 2;

    /* ============ Immutables ============ */
    
    address public immutable cEtherAddress;
    IController public immutable setController;
    IDebtIssuanceModule public immutable debtIssuanceModule;
    ICompoundLeverageModule public immutable compoundLeverageModule;

    /* ============ State Variables ============ */

    DEXAdapter.Addresses public addresses;

    /* ============ Events ============ */

    event FlashMint(
        address indexed _recipient,     // The recipient address of the minted Set token
        ISetToken indexed _setToken,    // The minted Set token
        address indexed _inputToken,    // The address of the input asset(ERC20/ETH) used to mint the Set tokens
        uint256 _amountInputToken,      // The amount of input tokens used for minting
        uint256 _amountSetIssued        // The amount of Set tokens received by the recipient
    );

    event FlashRedeem(
        address indexed _recipient,     // The recipient address which redeemed the Set token
        ISetToken indexed _setToken,    // The redeemed Set token
        address indexed _outputToken,   // The address of output asset(ERC20/ETH) received by the recipient
        uint256 _amountSetRedeemed,     // The amount of Set token redeemed for output tokens
        uint256 _amountOutputToken      // The amount of output tokens received by the recipient
    );

    /* ============ Modifiers ============ */

    modifier onlyLendingPool() {
        require(msg.sender == address(LENDING_POOL), "FlashMint: LENDING POOL ONLY");
        _;
    }

    modifier isValidPath(
        address[] memory _path,
        address _inputToken,
        address _outputToken
    )
    {
        if(_inputToken != _outputToken){
            require(
                _path[0] == _inputToken || (_inputToken == addresses.weth && _path[0] == DEXAdapter.ETH_ADDRESS),
                "FlashMint: INPUT_TOKEN_NOT_IN_PATH"
            );
            require(
                _path[_path.length-1] == _outputToken ||
                (_outputToken == addresses.weth && _path[_path.length-1] == DEXAdapter.ETH_ADDRESS),
                "FlashMint: OUTPUT_TOKEN_NOT_IN_PATH"
            );
        }
        _;
    }


    /* ============ Constructor ============ */

    /**
    * Sets various contract addresses
    *
    * @param _dexAddresses              Address of quickRouter, sushiRouter, uniV3Router, uniV3Router, curveAddressProvider, curveCalculator and weth. 
    * @param _setController             Set token controller used to verify a given token is a set
    * @param _debtIssuanceModule        DebtIssuanceModule used to issue and redeem tokens
    * @param _compoundLeverageModule    CompoundLeverageModule to sync before every mint / redemption
    * @param _aaveAddressProvider       Address of address provider for aaves addresses
    * @param _cEther                    Address of Compound's cEther token
    */
    constructor(
        DEXAdapter.Addresses memory _dexAddresses,
        IController _setController,
        IDebtIssuanceModule _debtIssuanceModule,
        ICompoundLeverageModule _compoundLeverageModule,
        address _aaveAddressProvider,
        address _cEther
    )
    public
    FlashLoanReceiverBaseV2(_aaveAddressProvider)
    {
        setController = _setController;
        debtIssuanceModule = _debtIssuanceModule;
        compoundLeverageModule = _compoundLeverageModule;
        addresses = _dexAddresses;
        cEtherAddress = _cEther;
    }

    /* ============ External Functions ============ */

    /**
     * Returns the collateral / debt token addresses and amounts for a leveraged index.
     *
     * @param _setToken     Address of the Set token to be minted / redeemed
     * @param _setAmount    Amount to mint / redeem
     * @param _isMint       Boolean indicating if the Set token is to be issued/minted or redeemed
     *
     * @return Struct containing the collateral / debt token addresses and amounts
     */
    function getLeveragedTokenData(
        ISetToken _setToken,
        uint256 _setAmount,
        bool _isMint
    )
    external
    view
    returns (LeveragedTokenData memory)
    {
        return _getLeveragedTokenData(_setToken, _setAmount, _isMint);
    }

    /**
     * Runs all the necessary approval functions required for a given ERC20 token.
     * This function can be called when a new token is added to a Set token during a rebalance.
     *
     * @param _token    Address of the token which needs approval
     */
    function approveToken(IERC20 _token) external {
        _approveToken(_token);
    }

    /**
     * Gets the input cost of issuing/minting a given amount of a Set token. This
     * function is not marked view, but should be static called off-chain.
     * This constraint is due to the need to interact with the Uniswap V3 quoter
     * contract and call sync on CompoundLeverageModule. 
     * @dev If the two SwapData paths contain the same tokens, there will be a slight error introduced in the result.
     *
     * @param _setToken                     Set token to mint
     * @param _setAmount                    Amount to mint
     * @param _swapDataDebtForCollateral    SwapData (token addresses and fee levels) to describe the swap path from debt to collateral token
     * @param _swapDataInputToken           SwapData (token addresses and fee levels) to describe the swap path from input to collateral token
     *
     * @return                              the amount of input tokens required to perfrom the issuance
     */
    function getIssueExactSet(
        ISetToken _setToken,
        uint256 _setAmount,
        DEXAdapter.SwapData memory _swapDataDebtForCollateral,
        DEXAdapter.SwapData memory _swapDataInputToken
    )
    external
    returns (uint256)
    {
        compoundLeverageModule.sync(_setToken, false);
        LeveragedTokenData memory issueInfo = _updateCompoundRateAndGetLeveragedTokenData(_setToken, _setAmount, true);
        uint256 collateralOwed = issueInfo.collateralAmount.preciseMul(1.0009 ether);
        uint256 borrowSaleProceeds = DEXAdapter.getAmountOut(addresses, _swapDataDebtForCollateral, issueInfo.debtAmount);
        collateralOwed = collateralOwed.sub(borrowSaleProceeds);
        return DEXAdapter.getAmountIn(addresses, _swapDataInputToken, collateralOwed);
    }

    /**
     * Gets the proceeds of a redemption of a given amount of a set token. This
     * function is not marked view, but should be static called from frontends.
     * This constraint is due to the need to interact with the Uniswap V3 quoter
     * contract and call sync on CompoundLeverageModule. 
     * @dev If the two SwapData paths contain the same tokens, there will be a slight error introduced in the result.
     *
     * @param _setToken                     Set token to redeem
     * @param _setAmount                    Amount to redeem
     * @param _swapDataCollateralForDebt    SwapData (token path and fee levels) describing the swap from collateral to debt token
     * @param _swapDataOutputToken          SwapData (token path and fee levels) describing the swap from collateral to output token
     *
     * @return                              amount of output token that would be obtained from the redemption
     */
    function getRedeemExactSet(
        ISetToken _setToken,
        uint256 _setAmount,
        DEXAdapter.SwapData memory _swapDataCollateralForDebt,
        DEXAdapter.SwapData memory _swapDataOutputToken
    )
    external
    returns (uint256)
    {
        compoundLeverageModule.sync(_setToken, true);
        LeveragedTokenData memory redeemInfo = _updateCompoundRateAndGetLeveragedTokenData(_setToken, _setAmount, false);
        uint256 debtOwed = redeemInfo.debtAmount.preciseMul(1.0009 ether);
        uint256 debtPurchaseCost = DEXAdapter.getAmountIn(addresses, _swapDataCollateralForDebt, debtOwed);
        uint256 extraCollateral = redeemInfo.collateralAmount.sub(debtPurchaseCost);
        return DEXAdapter.getAmountOut(addresses, _swapDataOutputToken, extraCollateral);
    }

    /**
     * Trigger redemption of Set token to pay the user with Eth
     *
     * @param _setToken                   Set token to redeem
     * @param _setAmount                  Amount to redeem
     * @param _minAmountOutputToken       Minimum amount of ETH to send to the user
     * @param _swapDataCollateralForDebt  SwapData (token path and fee levels) describing the swap from collateral token to debt token
     * @param _swapDataOutputToken        SwapData (token path and fee levels) describing the swap from collateral token to output token
     */
    function redeemExactSetForETH(
        ISetToken _setToken,
        uint256 _setAmount,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapDataCollateralForDebt,
        DEXAdapter.SwapData memory _swapDataOutputToken
    )
    external
    nonReentrant
    {
        _flashRedeem(
            _setToken,
            _setAmount,
            DEXAdapter.ETH_ADDRESS,
            _minAmountOutputToken,
            _swapDataCollateralForDebt,
            _swapDataOutputToken
        );
    }

    /**
     * Trigger redemption of Set token to pay the user with an arbitrary ERC20
     *
     * @param _setToken                   Set token to redeem
     * @param _setAmount                  Amount to redeem
     * @param _outputToken                Address of the ERC20 token to send to the user
     * @param _minAmountOutputToken       Minimum amount of output token to send to the user
     * @param _swapDataCollateralForDebt  SwapData (token path and fee levels) describing the swap from collateral token to debt token
     * @param _swapDataOutputToken        SwapData (token path and fee levels) describing the swap from collateral token to output token
     */
    function redeemExactSetForERC20(
        ISetToken _setToken,
        uint256 _setAmount,
        address _outputToken,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapDataCollateralForDebt,
        DEXAdapter.SwapData memory _swapDataOutputToken
    )
    external
    nonReentrant
    {
        _flashRedeem(
            _setToken,
            _setAmount,
            _outputToken,
            _minAmountOutputToken,
            _swapDataCollateralForDebt,
            _swapDataOutputToken
        );
    }

    /**
     * Trigger minting of Set token paying with any arbitrary ERC20 token.
     *
     * @param _setToken                     Set token to mint
     * @param _setAmount                    Amount to mint
     * @param _inputToken                   Input token to pay with
     * @param _maxAmountInputToken          Maximum amount of input token to spend
     * @param _swapDataDebtForCollateral    SwapData (token addresses and fee levels) to describe the swap path from debt to collateral token
     * @param _swapDataInputToken           SwapData (token addresses and fee levels) to describe the swap path from input to collateral token
     */
    function issueExactSetFromERC20(
        ISetToken _setToken,
        uint256 _setAmount,
        address _inputToken,
        uint256 _maxAmountInputToken,
        DEXAdapter.SwapData memory _swapDataDebtForCollateral,
        DEXAdapter.SwapData memory _swapDataInputToken
    )
    external
    nonReentrant
    {
        _flashMint(
            _setToken,
            _setAmount,
            _inputToken,
            _maxAmountInputToken,
            _swapDataDebtForCollateral,
            _swapDataInputToken
        );
    }

    /**
     * Trigger minting of set token paying with ETH.
     *
     * @param _setToken                     Set token to mint
     * @param _setAmount                    Amount to mint
     * @param _swapDataDebtForCollateral    SwapData (token addresses and fee levels) to describe the swap path from debt to collateral token
     * @param _swapDataInputToken           SwapData (token addresses and fee levels) to describe the swap path from eth to collateral token
     */
    function issueExactSetFromETH(
        ISetToken _setToken,
        uint256 _setAmount,
        DEXAdapter.SwapData memory _swapDataDebtForCollateral,
        DEXAdapter.SwapData memory _swapDataInputToken
    )
    external
    payable
    nonReentrant
    {
        _flashMint(
            _setToken,
            _setAmount,
            DEXAdapter.ETH_ADDRESS,
            msg.value,
            _swapDataDebtForCollateral,
            _swapDataInputToken
        );
    }

    /**
     * This is the callback function that will be called by the AaveLending Pool after flashloaned tokens have been sent
     * to this contract.
     * After exiting this function the Lending Pool will attempt to transfer back the loaned tokens + interest. If it fails to do so
     * the whole transaction gets reverted
     *
     * @param assets     Addresses of all assets that were borrowed
     * @param amounts    Amounts that were borrowed
     * @param premiums   Interest to be paid on top of borrowed amount
     * @param initiator  Address that initiated the flashloan
     * @param params     Encoded bytestring of other parameters from the original contract call to be used downstream
     *
     * @return           Boolean indicating success of the operation (fixed to true otherwise the whole transaction would be reverted by lending pool)
     */
    function executeOperation(
        address[] memory assets,
        uint256[] memory amounts,
        uint256[] memory premiums,
        address initiator,
        bytes memory params
    )
    external
    override
    onlyLendingPool
    returns (bool)
    {
        require(initiator == address(this), "FlashMint: INVALID FLASHLOAN INITIATOR");
        // assets.length must be 1.
        require(assets.length == 1, "FlashMint: TOO MANY ASSETS");
        require(amounts.length == 1, "FlashMint: TOO MANY AMOUNTS");
        require(premiums.length == 1, "FlashMint: TOO MANY PREMIUMS");
        
        DecodedParams memory decodedParams = abi.decode(params, (DecodedParams));

        if(decodedParams.isIssuance){
            _performMint(assets[0], amounts[0], premiums[0], decodedParams);
        } else {
            _performRedemption(assets[0], amounts[0], premiums[0], decodedParams);
        }

        return true;
    }

    /**
     * Runs all the necessary approval functions required for a list of ERC20 tokens.
     *
     * @param _tokens    Addresses of the tokens which need approval
     */
    function approveTokens(IERC20[] memory _tokens) external {
        for (uint256 i = 0; i < _tokens.length; i++) {
            _approveToken(_tokens[i]);
        }
    }

    /**
     * Runs all the necessary approval functions required before minting or redeeming a Set token. 
     * This function need to be called only once before the first time this smart contract is used
     * on any particular Set token.
     *
     * @param _setToken    Address of the SetToken being initialized
     */
    function approveSetToken(ISetToken _setToken) external {
        LeveragedTokenData memory leveragedTokenData = _updateCompoundRateAndGetLeveragedTokenData(_setToken, 1 ether, true);


        _approveToken(IERC20(leveragedTokenData.collateralCToken));
        _approveTokenToLendingPool(IERC20(leveragedTokenData.collateralToken));

        _approveToken(IERC20(leveragedTokenData.debtToken));
        _approveTokenToLendingPool(IERC20(leveragedTokenData.debtToken));
    }

    /* ============ Internal Functions ============ */

    /**
     * Performs all the necessary steps for minting using the collateral tokens obtained in the flashloan.
     *
     * @param _collateralToken            Address of the underlying collateral token that was loaned
     * @param _collateralTokenAmountNet   Amount of collateral token that was received as flashloan
     * @param _premium                    Premium / Interest that has to be returned to the lending pool on top of the loaned amount
     * @param _decodedParams              Struct containing token addresses / amounts to perform mint
     */
    function _performMint(
        address _collateralToken,
        uint256 _collateralTokenAmountNet,
        uint256 _premium,
        DecodedParams memory _decodedParams
    )
    internal
    {
        // Deposit collateral token obtained from flashloan to get the respective cToken position required for issuance
        _depositToCompound(_decodedParams.leveragedTokenData.collateralCToken, _collateralToken, _collateralTokenAmountNet);
        // Issue set using the cToken returned by deposit step
        _mintSet(_decodedParams.setToken, _decodedParams.setAmount, _decodedParams.originalSender);
        // Obtain necessary collateral tokens to repay flashloan
        uint amountInputTokenSpent = _obtainCollateralTokens(
            _collateralToken,
            _collateralTokenAmountNet + _premium,
            _decodedParams
        );
        require(amountInputTokenSpent <= _decodedParams.limitAmount, "FlashMint: INSUFFICIENT INPUT AMOUNT");
    }

    /**
     * Performs all the necessary steps for redemption using the debt tokens obtained in the flashloan
     *
     * @param _debtToken           Address of the debt token that was loaned
     * @param _debtTokenAmountNet  Amount of debt token that was received as flashloan
     * @param _premium             Premium / Interest that has to be returned to the lending pool on top of the loaned amount
     * @param _decodedParams       Struct containing token addresses / amounts to perform redemption
     */
    function _performRedemption(
        address _debtToken,
        uint256 _debtTokenAmountNet,
        uint256 _premium,
        DecodedParams memory _decodedParams
    )
    internal
    {
        // Redeem set using debt tokens obtained from flashloan
        _redeemSet(
            _decodedParams.setToken,
            _decodedParams.setAmount,
            _decodedParams.originalSender
        );

        _withdrawFromCompound(
            _decodedParams.leveragedTokenData.collateralCToken,
            _decodedParams.leveragedTokenData.cTokenAmount,
            _decodedParams.leveragedTokenData.collateralToken,
            _decodedParams.leveragedTokenData.collateralAmount
        );
        // Obtain debt tokens required to repay flashloan by swapping the underlying collateral tokens obtained in withdraw step
        uint256 collateralTokenSpent = _swapCollateralForDebtToken(
            _debtTokenAmountNet + _premium,
            _debtToken,
            _decodedParams.leveragedTokenData.collateralAmount,
            _decodedParams.leveragedTokenData.collateralToken,
            _decodedParams.collateralAndDebtSwapData
        );
        // Liquidate remaining collateral tokens for the payment token specified by user
        uint256 amountOutputToken = _liquidateCollateralTokens(
            collateralTokenSpent,
            _decodedParams.setToken,
            _decodedParams.setAmount,
            _decodedParams.originalSender,
            _decodedParams.paymentToken,
            _decodedParams.limitAmount,
            _decodedParams.leveragedTokenData.collateralToken,
            _decodedParams.leveragedTokenData.collateralAmount  - 2*ROUNDING_ERROR_MARGIN,
            _decodedParams.paymentTokenSwapData
        );
        require(amountOutputToken >= _decodedParams.limitAmount, "FlashMint: INSUFFICIENT OUTPUT AMOUNT");
    }


    /**
    * Returns the collateral / debt token addresses and amounts for a leveraged index
    *
    * @param _setToken      Address of the SetToken to be issued / redeemed
    * @param _setAmount     Amount of SetTokens to issue / redeem
    * @param _isMint        Boolean indicating if the SetToken is to be issued or redeemed
    *
    * @return Struct containing the collateral / debt token addresses and amounts
    */
    function _getBasicLeveragedTokenData(
        ISetToken _setToken,
        uint256 _setAmount,
        bool _isMint
    )
    internal
    view
    returns (LeveragedTokenData memory)
    {
        address[] memory components;
        uint256[] memory equityPositions;
        uint256[] memory debtPositions;
        LeveragedTokenData memory _leveragedTokenData;

        if(_isMint){
            (components, equityPositions, debtPositions) = debtIssuanceModule.getRequiredComponentIssuanceUnits(_setToken, _setAmount);
        } else {
            (components, equityPositions, debtPositions) = debtIssuanceModule.getRequiredComponentRedemptionUnits(_setToken, _setAmount);
        }
        
        require(equityPositions[0] == 0 || equityPositions[1] == 0, "FlashMint: TOO MANY EQUITY POSITIONS");
        
        require(debtPositions[0] == 0 || debtPositions[1] == 0, "FlashMint: TOO MANY DEBT POSITIONS");

        if(equityPositions[0] > 0){
            _leveragedTokenData.collateralCToken = components[0];
            _leveragedTokenData.cTokenAmount = equityPositions[0];
            _leveragedTokenData.debtToken = components[1];
            _leveragedTokenData.debtAmount = debtPositions[1];
        } else {
            _leveragedTokenData.collateralCToken = components[1];
            _leveragedTokenData.cTokenAmount = equityPositions[1];
            _leveragedTokenData.debtToken = components[0];
            _leveragedTokenData.debtAmount = debtPositions[0];
        }
        if (_leveragedTokenData.collateralCToken == cEtherAddress) {
            _leveragedTokenData.collateralToken = addresses.weth;
        } else {
            _leveragedTokenData.collateralToken = CErc20Storage(_leveragedTokenData.collateralCToken).underlying();
        }
        return _leveragedTokenData; 
    }


    /**
    * Returns the collateral / debt token addresses and amounts for a leveraged index
    *
    * @param _setToken     Address of the Set token to be minted / redeemed
    * @param _setAmount    Amount to mint / redeem
    * @param _isMint       Boolean indicating if the Set token is to be issued/minted or redeemed
    *
    * @return Struct containing the collateral / debt token addresses and amounts
    */
    function _getLeveragedTokenData(
        ISetToken _setToken,
        uint256 _setAmount,
        bool _isMint
    )
    internal
    view
    returns (LeveragedTokenData memory)
    {
        LeveragedTokenData memory _leveragedTokenData = _getBasicLeveragedTokenData(_setToken, _setAmount, _isMint);
        Exp memory exchangeRate = Exp({mantissa: ICEther(payable(_leveragedTokenData.collateralCToken)).exchangeRateStored()});
        (, uint256 collateralAmount) = mulScalarTruncate(exchangeRate, _leveragedTokenData.cTokenAmount);
        _leveragedTokenData.collateralAmount = collateralAmount + ROUNDING_ERROR_MARGIN;
        return _leveragedTokenData; 
    }

    /**
    * Returns the collateral / debt token addresses and amounts for a leveraged index
    *
    * @param _setToken     Address of the Set token to be minted / redeemed
    * @param _setAmount    Amount to mint / redeem
    * @param _isMint       Boolean indicating if the Set token is to be issued/minted or redeemed
    *
    * @return Struct containing the collateral / debt token addresses and amounts
    */
    function _updateCompoundRateAndGetLeveragedTokenData(
        ISetToken _setToken,
        uint256 _setAmount,
        bool _isMint
    )
    internal
    returns (LeveragedTokenData memory)
    {
        LeveragedTokenData memory _leveragedTokenData = _getBasicLeveragedTokenData(_setToken, _setAmount, _isMint);
        Exp memory exchangeRate = Exp({mantissa: ICEther(payable(_leveragedTokenData.collateralCToken)).exchangeRateCurrent()});
        (, uint256 collateralAmount) = mulScalarTruncate(exchangeRate, _leveragedTokenData.cTokenAmount);
        _leveragedTokenData.collateralAmount = collateralAmount + ROUNDING_ERROR_MARGIN;
        return _leveragedTokenData; 
    }


    /**
     * Approves max amount of given token to all exchange routers and the debt issuance module
     *
     * @param _token  Address of the token to be approved
     */
    function _approveToken(IERC20 _token) internal {
        _token.approve(address(debtIssuanceModule), MAX_UINT256);
    }

    /**
     * Initiates a flashloan call with the correct parameters for minting Set tokens in the callback
     * Borrows correct amount of collateral token and and forwards encoded memory to control mint in the callback.
     *
     * @param _setToken                     Set token to mint
     * @param _setAmount                    Amount to mint
     * @param _inputToken                   Input token to pay with
     * @param _maxAmountInputToken          Maximum amount of input token to spend
     * @param _swapDataDebtForCollateral    SwapData (token addresses and fee levels) to describe the swap path from debt to collateral token
     * @param _swapDataInputToken           SwapData (token addresses and fee levels) to describe the swap path from input to collateral token
     */
    function _flashMint(
        ISetToken _setToken,
        uint256 _setAmount,
        address _inputToken,
        uint256 _maxAmountInputToken,
        DEXAdapter.SwapData memory _swapDataDebtForCollateral,
        DEXAdapter.SwapData memory _swapDataInputToken
    )
    internal
    {
        // need to check (true or false to issue)
        compoundLeverageModule.sync(_setToken, true);

        LeveragedTokenData memory leveragedTokenData = _updateCompoundRateAndGetLeveragedTokenData(_setToken, _setAmount, true);

        address[] memory assets = new address[](1);
        assets[0] = leveragedTokenData.collateralToken;
        uint[] memory amounts =  new uint[](1);
        amounts[0] = leveragedTokenData.collateralAmount;
        bytes memory params = abi.encode(
            DecodedParams(
                _setToken,
                _setAmount,
                msg.sender,
                true,
                _inputToken,
                _maxAmountInputToken,
                leveragedTokenData,
                _swapDataDebtForCollateral,
                _swapDataInputToken
            )
        );
        _flashloan(assets, amounts, params);
    }

    /**
     * Initiates a flashloan call with the correct parameters for redeeming Set tokens in the callback
     *
     * @param _setToken                   Set token to redeem
     * @param _setAmount                  Amount to redeem
     * @param _outputToken                Address of the output token to send to the user
     * @param _minAmountOutputToken       Minimum amount of output token to send to the user
     * @param _swapDataCollateralForDebt  SwapData (token path and fee levels) describing the swap from collateral token to debt token
     * @param _swapDataOutputToken        SwapData (token path and fee levels) describing the swap from collateral token to output token
     */
    function _flashRedeem(
        ISetToken _setToken,
        uint256 _setAmount,
        address  _outputToken,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapDataCollateralForDebt,
        DEXAdapter.SwapData memory _swapDataOutputToken
    )
    internal
    {   
        compoundLeverageModule.sync(_setToken, true);
        LeveragedTokenData memory leveragedTokenData = _updateCompoundRateAndGetLeveragedTokenData(_setToken, _setAmount, false);
        address[] memory assets = new address[](1);
        assets[0] = leveragedTokenData.debtToken;
        uint[] memory amounts =  new uint[](1);
        amounts[0] = leveragedTokenData.debtAmount;

        bytes memory params = abi.encode(
            DecodedParams(
                _setToken,
                _setAmount,
                msg.sender,
                false,
                _outputToken,
                _minAmountOutputToken,
                leveragedTokenData,
                _swapDataCollateralForDebt,
                _swapDataOutputToken
            )
        );

        _flashloan(assets, amounts, params);

    }

    /**
     * Transfers output tokens to the user from redemption, if conversion is necessary,
     * exchanges collateral token for output token and then transfers them out.
     *
     * @param _collateralTokenSpent    Amount of collateral token spent to obtain the debt token required for redemption
     * @param _setToken                Set token to redeem
     * @param _setAmount               Amount to redeem
     * @param _originalSender          Account that initiated the redemption
     * @param _outputToken             Token to send to the user
     * @param _collateralToken         Collateral token to exchange for the output token
     * @param _collateralAmount        Amount to exchange
     * @param _minAmountOutputToken    Minimum amount of output token to send to the user
     * @param _swapData                SwapData (token path and fee levels) describing the swap from collateral token to output token
     *
     * @return Amount of output token returned to the user
     */
    function _liquidateCollateralTokens(
        uint256 _collateralTokenSpent,
        ISetToken _setToken,
        uint256 _setAmount,
        address _originalSender,
        address _outputToken,
        uint256 _minAmountOutputToken,
        address _collateralToken,
        uint256 _collateralAmount,
        DEXAdapter.SwapData memory _swapData
    )
    internal
    returns (uint256)
    {
        require(_collateralAmount >= _collateralTokenSpent, "FlashMint: OVERSPENT COLLATERAL TOKEN");
        uint256 amountToReturn = _collateralAmount.sub(_collateralTokenSpent);
        uint256 outputAmount;
        if(_outputToken == DEXAdapter.ETH_ADDRESS){
            outputAmount = _liquidateCollateralTokensForETH(
                _collateralToken,
                amountToReturn,
                _originalSender,
                _minAmountOutputToken,
                _swapData
            );
        } else {
            outputAmount = _liquidateCollateralTokensForERC20(
                _collateralToken,
                amountToReturn,
                _originalSender,
                IERC20(_outputToken),
                _minAmountOutputToken,
                _swapData
            );
        }
        emit FlashRedeem(_originalSender, _setToken, _outputToken, _setAmount, outputAmount);
        return outputAmount;
    }

    /**
     * Returns the collateral token directly to the user.
     *
     * @param _collateralToken       Collateral token
     * @param _collateralRemaining   Amount of the collateral token remaining after buying required debt tokens
     * @param _originalSender        Original sender that is to receive the collateral token
     */
    function _returnCollateralTokensToSender(
        address _collateralToken,
        uint256 _collateralRemaining,
        address _originalSender
    )
    internal
    {
        IERC20(_collateralToken).transfer(_originalSender, _collateralRemaining);
    }

    /**
     * Exchanges the collateral tokens for the output tokens and transfers them to the user.
     *
     * @param _collateralToken       Collateral token
     * @param _collateralRemaining   Amount of the collateral tokens remaining after buying required debt tokens
     * @param _originalSender        Original sender that is to receive the output tokens
     * @param _outputToken           ERC20 token to return to the user
     * @param _minAmountOutputToken  Minimum amount of output token to send to the user
     * @param _swapData              SwapData (token path and fee levels) describing the swap from collateral token to output token
     *
     * @return Amount of output token returned to the user
     */
    function _liquidateCollateralTokensForERC20(
        address _collateralToken,
        uint256 _collateralRemaining,
        address _originalSender,
        IERC20 _outputToken,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapData
    )
    internal
    returns (uint256)
    {
        if(address(_outputToken) == _collateralToken){
            _returnCollateralTokensToSender(_collateralToken, _collateralRemaining, _originalSender);
            return _collateralRemaining;
        }
        uint256 outputTokenAmount = _swapCollateralForOutputToken(
            _collateralToken,
            _collateralRemaining,
            address(_outputToken),
            _minAmountOutputToken,
            _swapData
        );
        _outputToken.transfer(_originalSender, outputTokenAmount);
        return outputTokenAmount;
    }

    /**
     * Exchanges the remaining collateral tokens for weth, unwraps that weth and returns native eth to the user.
     *
     * @param _collateralToken            Collateral token
     * @param _collateralRemaining        Amount of the collateral tokens remaining after buying required debt tokens
     * @param _originalSender             Original sender that is to receive the native eth
     * @param _minAmountOutputToken       Minimum amount of native eth to send to the user
     * @param _swapData                   SwapData (token path and fee levels) describing the swap from collateral token to eth
     *
     * @return Amount of eth returned to the user
     */
    function _liquidateCollateralTokensForETH(
        address _collateralToken,
        uint256 _collateralRemaining,
        address _originalSender,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapData
    )
    internal
    isValidPath(_swapData.path, _collateralToken, addresses.weth)
    returns(uint256)
    {
        uint256 ethAmount = _swapCollateralForOutputToken(
            _collateralToken,
            _collateralRemaining,
            addresses.weth,
            _minAmountOutputToken,
            _swapData
        );
        if (ethAmount > 0) {
            IWETH(addresses.weth).withdraw(ethAmount);
            (payable(_originalSender)).sendValue(ethAmount);
        }
        return ethAmount;
    }

    /**
     * Obtains the collateral tokens necessary to return the flashloan by swapping the debt tokens obtained
     * from mint and making up the shortfall using the users funds.
     *
     * @param _collateralToken       Collateral token
     * @param _amountRequired        Amount required to repay the flashloan
     * @param _decodedParams         Struct containing decoded data from original call passed through via flashloan
     *
     * @return Amount of input token spent
     */
    function _obtainCollateralTokens(
        address _collateralToken,
        uint256 _amountRequired,
        DecodedParams memory _decodedParams
    )
    internal
    returns (uint256)
    {
        uint collateralTokenObtained =  _swapDebtForCollateralToken(
            _collateralToken,
            _decodedParams.leveragedTokenData.debtToken,
            _decodedParams.leveragedTokenData.debtAmount,
            _decodedParams.collateralAndDebtSwapData
        );

        uint collateralTokenShortfall = _amountRequired.sub(collateralTokenObtained) + ROUNDING_ERROR_MARGIN;
        uint amountInputToken;

        if(_decodedParams.paymentToken == DEXAdapter.ETH_ADDRESS){
            amountInputToken = _makeUpShortfallWithETH(
                _collateralToken,
                collateralTokenShortfall,
                _decodedParams.originalSender,
                _decodedParams.limitAmount,
                _decodedParams.paymentTokenSwapData
            );
        } else {
            amountInputToken = _makeUpShortfallWithERC20(
                _collateralToken,
                collateralTokenShortfall,
                _decodedParams.originalSender,
                IERC20(_decodedParams.paymentToken),
                _decodedParams.limitAmount,
                _decodedParams.paymentTokenSwapData
            );
        }
        emit FlashMint(
            _decodedParams.originalSender,
            _decodedParams.setToken,
            _decodedParams.paymentToken,
            amountInputToken,
            _decodedParams.setAmount
        );
        return amountInputToken;
    }

    /**
     * Mints Set tokens using the previously obtained collateral token.
     * Results in debt tokens being returned to the contract.
     *
     * @param _setToken         Set token to mint
     * @param _setAmount        Amount to mint
     * @param _originalSender   Account that initiated the mint, which will receive the set tokens
     */
    function _mintSet(ISetToken _setToken, uint256 _setAmount, address _originalSender) internal {
       
        debtIssuanceModule.issue(_setToken, _setAmount, _originalSender);
    }

    /**
     * Redeems Set tokens using the previously obtained debt token.
     * Results in collateral tokens being returned to the contract.
     *
     * @param _setToken         Set token to redeem
     * @param _setAmount        Amount to redeem
     * @param _originalSender   Adress that initiated the redemption which is the source of the set tokens to be redeemed
     */
    function _redeemSet(ISetToken _setToken, uint256 _setAmount, address _originalSender) internal {
        _setToken.safeTransferFrom(_originalSender, address(this), _setAmount);
        debtIssuanceModule.redeem(_setToken, _setAmount, address(this));
    }

    /**
     * Transfers the shortfall between the amount of tokens required to return flashloan and what was obtained
     * from swapping the debt tokens from the users address.
     *
     * @param _token                 Set token to exchange shortfall
     * @param _shortfall             Amount of tokens that the tx is short
     * @param _originalSender        Account of originator, transfer the Set tokens from that account
     */
    function _transferShortfallFromSender(
        address _token,
        uint256 _shortfall,
        address _originalSender
    )
    internal
    {
        if(_shortfall>0){
            IERC20(_token).safeTransferFrom(_originalSender, address(this), _shortfall);
        }
    }

    /**
     * Makes up the collateral token shortfall with user specified ERC20 token.
     *
     * @param _collateralToken             Collateral token
     * @param _collateralTokenShortfall    Amount of tokens that the tx is short after selling debt tokens
     * @param _originalSender              Originator account to return the tokens to
     * @param _inputToken                  Input token to pay with
     * @param _maxAmountInputToken         Maximum amount of input token to spend
     *
     * @return Amount of input token spent
     */
    function _makeUpShortfallWithERC20(
        address _collateralToken,
        uint256 _collateralTokenShortfall,
        address _originalSender,
        IERC20 _inputToken,
        uint256 _maxAmountInputToken,
        DEXAdapter.SwapData memory _swapData
    )
    internal
    returns (uint256)
    {
        if(address(_inputToken) == _collateralToken){
            _transferShortfallFromSender(_collateralToken, _collateralTokenShortfall, _originalSender);
            return _collateralTokenShortfall;
        } else {
            _inputToken.transferFrom(_originalSender, address(this), _maxAmountInputToken);
            uint256 amountInputToken = _swapInputForCollateralToken(
                _collateralToken,
                _collateralTokenShortfall,
                address(_inputToken),
                _maxAmountInputToken,
                _swapData
            );
            if(amountInputToken < _maxAmountInputToken){
                _inputToken.transfer(_originalSender, _maxAmountInputToken.sub(amountInputToken));
            }
            return amountInputToken;
        }
    }

    /**
     * Makes up the collateral token shortfall with native eth.
     *
     * @param _collateralToken             Collateral token
     * @param _collateralTokenShortfall    Amount of tokens that the tx is short after selling debt tokens
     * @param _originalSender              Originator account to return the tokens to
     * @param _maxAmountEth                Maximum amount of eth to pay
     *
     * @return Amount of eth spent
     */
    function _makeUpShortfallWithETH(
        address _collateralToken,
        uint256 _collateralTokenShortfall,
        address _originalSender,
        uint256 _maxAmountEth,
        DEXAdapter.SwapData memory _swapData

    )
    internal
    returns(uint256)
    {
        IWETH(addresses.weth).deposit{value: _maxAmountEth}();

        uint256 amountEth = _swapInputForCollateralToken(
            _collateralToken,
            _collateralTokenShortfall,
            addresses.weth,
            _maxAmountEth,
            _swapData
        );

        if(_maxAmountEth > amountEth){
            uint256 amountEthReturn = _maxAmountEth.sub(amountEth);
            IWETH(addresses.weth).withdraw(amountEthReturn);
            (payable(_originalSender)).sendValue(amountEthReturn);
        }
        return amountEth;
    }

    /**
     * Swaps the debt tokens obtained from minting for the collateral tokens.
     *
     * @param _collateralToken            Collateral token to buy
     * @param _debtToken                  Debt token to sell
     * @param _debtAmount                 Amount of debt token to sell
     * @param _swapData                   SwapData (token path and fee levels) describing the swap from debt token to collateral token
     *
     * @return Amount of collateral token obtained
     */
    function _swapDebtForCollateralToken(
        address _collateralToken,
        address _debtToken,
        uint256 _debtAmount,
        DEXAdapter.SwapData memory _swapData
    )
    internal
    isValidPath(_swapData.path, _debtToken, _collateralToken)
    returns (uint256)
    {
        return addresses.swapExactTokensForTokens(
            _debtAmount,
        // minAmountOut is 0 here since we are going to make up the shortfall with the input token.
        // Sandwich protection is provided by the check at the end against _maxAmountInputToken parameter specified by the user
            0,
            _swapData
        );
    }

    /**
     * Acquires debt tokens needed for flashloan repayment by swapping a portion of the collateral tokens obtained from redemption.
     *
     * @param _debtAmount             Amount of debt token to buy
     * @param _debtToken              Debt token
     * @param _collateralAmount       Amount of collateral token available (eg. maxAmountIn)
     * @param _collateralToken        Collateral token
     * @param _swapData               SwapData (token path and fee levels) describing the swap from collateral token to debt token
     *
     * @return Amount of collateral token spent
     */
    function _swapCollateralForDebtToken(
        uint256 _debtAmount,
        address _debtToken,
        uint256 _collateralAmount,
        address _collateralToken,
        DEXAdapter.SwapData memory _swapData
    )
    internal
    isValidPath(_swapData.path, _collateralToken, _debtToken)
    returns (uint256)
    {
        return addresses.swapTokensForExactTokens(
            _debtAmount,
            _collateralAmount,
            _swapData
        );
    }

    /**
     * Acquires the required amount of collateral tokens by exchanging the input tokens.
     * Does nothing if collateral and input token are indentical.
     *
     * @param _collateralToken       Collateral token
     * @param _amountRequired        Amount required to repay the flashloan
     * @param _inputToken            Input token
     * @param _maxAmountInputToken   Maximum amount of input token to spend
     * @param _swapData              SwapData (token path and fee levels) describing the swap from input token to debt token
     *
     * @return Amount of input token spent
     */
    function _swapInputForCollateralToken(
        address _collateralToken,
        uint256 _amountRequired,
        address _inputToken,
        uint256 _maxAmountInputToken,
        DEXAdapter.SwapData memory _swapData
    )
    internal
    isValidPath(
        _swapData.path,
        _inputToken,
        _collateralToken
    )
    returns (uint256)
    {
        if(_collateralToken == _inputToken) return _amountRequired;
        return addresses.swapTokensForExactTokens(
            _amountRequired,
            _maxAmountInputToken,
            _swapData
        );
    }


    /**
     * Swaps the collateral tokens obtained from redemption for the selected output token
     * If both tokens are the same, does nothing
     *
     * @param _collateralToken        Collateral token
     * @param _collateralTokenAmount  Amount to swap
     * @param _outputToken            ERC20 token to swap into
     * @param _minAmountOutputToken   Minimum amount of output token to receive
     * @param _swapData               SwapData (token path and fee levels) describing the swap from collateral token to output token
     *
     * @return Amount of output token obtained
     */
    function _swapCollateralForOutputToken(
        address _collateralToken,
        uint256 _collateralTokenAmount,
        address _outputToken,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapData
    )
    internal
    isValidPath(_swapData.path, _collateralToken, _outputToken)
    returns (uint256)
    {
        return addresses.swapExactTokensForTokens(
            _collateralTokenAmount,
            _minAmountOutputToken,
            _swapData
        );
    }

    /**
     * Deposit collateral to compound to obtain collateralCToken for mint.
     *
     * @param _cTokenAddress                cToken
     * @param _collateralToken              Collateral token
     * @param _depositAmount                Amount to deposit
     */
    function _depositToCompound(
        address _cTokenAddress,
        address _collateralToken,
        uint256 _depositAmount
    ) internal {
        if (_collateralToken != addresses.weth) {
            IERC20(_collateralToken).approve(_cTokenAddress, _depositAmount);
            ICErc20Delegator(_cTokenAddress).mint(_depositAmount);
        } else {
            IWETH(addresses.weth).withdraw(_depositAmount);
            ICEther(payable(_cTokenAddress)).mint{value: _depositAmount}();
        }
    }

    /**
     * Redeem Compound cToken for underlying collateral.  
     *
     * @param _cTokenAddress         cToken
     * @param _cTokenAmount          Amount to redeem
     * @param _collateralToken       Collateral token to withdraw
     * @param _collateralAmount      If collateral is ETH (eg. cETH), conver this amount to WETH.
     */
    function _withdrawFromCompound(
        address _cTokenAddress,
        uint256 _cTokenAmount,
        address _collateralToken,
        uint256 _collateralAmount
    ) internal returns (uint256){
        uint256 result;
        if (_collateralToken != addresses.weth) {
            result = ICErc20Delegator(_cTokenAddress).redeem(_cTokenAmount);
        } else {
            result = ICEther(payable(_cTokenAddress)).redeem(_cTokenAmount);
            IWETH(addresses.weth).deposit{value: (_collateralAmount - ROUNDING_ERROR_MARGIN)}();
        }
        return result;
    }


    /**
     * Approves max amount of token to Lending Pool.
     *
     * @param _token              Address of the token to approve
     */
    function _approveTokenToLendingPool(
        IERC20 _token
    )
    internal
    {
        _token.approve(address(LENDING_POOL), MAX_UINT256);
    }

    /**
     * Triggers the flashloan from the Lending Pool
     *
     * @param assets         Tokens to borrow 
     * @param amounts        Amounts of tokens to borrow
     * @param params         Encoded memory to forward to the executeOperation method
     */
    function _flashloan(
        address[] memory assets,
        uint256[] memory amounts,
        bytes memory params
    )
    internal
    {
        address receiverAddress = address(this);
        address onBehalfOf = address(this);
        uint16 referralCode = 0;
        uint256[] memory modes = new uint256[](assets.length);

        // 0 = no debt (flash), 1 = stable, 2 = variable
        for (uint256 i = 0; i < assets.length; i++) {
            modes[i] = 0;
        }

        LENDING_POOL.flashLoan(
            receiverAddress,
            assets,
            amounts,
            modes,
            onBehalfOf,
            params,
            referralCode
        );
    }

}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;


interface IAToken {
  /**
   * @dev Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   **/
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";


/**
 * @title ICErc20
 *
 * Interface for interacting with Compound cErc20 tokens (e.g. Dai, USDC)
 */
interface ICErc20 is IERC20 {

    function borrowBalanceCurrent(address _account) external returns (uint256);

    function borrowBalanceStored(address _account) external view returns (uint256);

    function balanceOfUnderlying(address _account) external returns (uint256);

    /**
     * Calculates the exchange rate from the underlying to the CToken
     *
     * @notice Accrue interest then return the up-to-date exchange rate
     * @return Calculated exchange rate scaled by 1e18
     */
    function exchangeRateCurrent() external returns (uint256);

    function exchangeRateStored() external view returns (uint256);

    function underlying() external view returns (address);

    /**
     * Sender supplies assets into the market and receives cTokens in exchange
     *
     * @notice Accrues interest whether or not the operation succeeds, unless reverted
     * @param _mintAmount The amount of the underlying asset to supply
     * @return uint256 0=success, otherwise a failure
     */
    function mint(uint256 _mintAmount) external returns (uint256);

    /**
     * @notice Sender redeems cTokens in exchange for the underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param _redeemTokens The number of cTokens to redeem into underlying
     * @return uint256 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeem(uint256 _redeemTokens) external returns (uint256);

    /**
     * @notice Sender redeems cTokens in exchange for a specified amount of underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param _redeemAmount The amount of underlying to redeem
     * @return uint256 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemUnderlying(uint256 _redeemAmount) external returns (uint256);

    /**
      * @notice Sender borrows assets from the protocol to their own address
      * @param _borrowAmount The amount of the underlying asset to borrow
      * @return uint256 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function borrow(uint256 _borrowAmount) external returns (uint256);

    /**
     * @notice Sender repays their own borrow
     * @param _repayAmount The amount to repay
     * @return uint256 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function repayBorrow(uint256 _repayAmount) external returns (uint256);
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
import { ISetToken } from "./ISetToken.sol";

interface ICompoundLeverageModule {
    function sync(ISetToken _setToken, bool _shouldAccrueInterest) external virtual;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

interface ICErc20Delegator {
    function _acceptAdmin() external returns(uint256);
    function _addReserves(uint256 addAmount) external returns(uint256);
    function _reduceReserves(uint256 reduceAmount) external returns(uint256);
    function _renounceAdminRights() external returns(uint256);
    function _renounceFuseAdminRights() external returns(uint256);
    function _resignImplementation() external;
    function _setAdminFee(uint256 newAdminFeeMantissa) external returns(uint256);
    function _setComptroller(address newComptroller) external returns(uint256);
    function _setFuseFee() external returns(uint256);
    function _setInterestRateModel(address newInterestRateModel) external returns(uint256);
    function _setPendingAdmin(address newPendingAdmin) external returns(uint256);
    function _setReserveFactor(uint256 newReserveFactorMantissa) external returns(uint256);
    function _withdrawAdminFees(uint256 withdrawAmount) external returns(uint256);
    function _withdrawFuseFees(uint256 withdrawAmount) external returns(uint256);
    function accrualBlockNumber() external view returns(uint256);
    function accrueInterest() external returns(uint256);
    function admin() external view returns(address);
    function adminFeeMantissa() external view returns(uint256);
    function adminHasRights() external view returns(bool);
    function allowance(address owner, address spender) external view returns(uint256);
    function approve(address spender, uint256 amount) external returns(bool);
    function balanceOf(address owner) external view returns(uint256);
    function balanceOfUnderlying(address owner) external returns(uint256);
    function borrow(uint256 borrowAmount) external returns(uint256);
    function borrowBalanceCurrent(address account) external returns(uint256);
    function borrowBalanceStored(address account) external view returns(uint256);
    function borrowIndex() external view returns(uint256);
    function borrowRatePerBlock() external view returns(uint256);
    function comptroller() external view returns(address);
    function decimals() external view returns(uint8);
    function exchangeRateCurrent() external returns(uint256);
    function exchangeRateStored() external view returns(uint256);
    function fuseAdminHasRights() external view returns(bool);
    function fuseFeeMantissa() external view returns(uint256);
    function getAccountSnapshot(address account) external view returns(uint256, uint256, uint256, uint256);
    function getCash() external view returns(uint256);
    function implementation() external view returns(address);
    function initialize(address comptroller_, address interestRateModel_, uint256 initialExchangeRateMantissa_, string memory name_, string memory symbol_, uint8 decimals_, uint256 reserveFactorMantissa_, uint256 adminFeeMantissa_) external;
    function initialize(address underlying_, address comptroller_, address interestRateModel_, uint256 initialExchangeRateMantissa_, string memory name_, string memory symbol_, uint8 decimals_, uint256 reserveFactorMantissa_, uint256 adminFeeMantissa_) external;
    function interestRateModel() external view returns(address);
    function isCEther() external view returns(bool);
    function isCToken() external view returns(bool);
    function liquidateBorrow(address borrower, uint256 repayAmount, address cTokenCollateral) external returns(uint256);
    function mint(uint256 mintAmount) external returns(uint256);
    function name() external view returns(string memory);
    function pendingAdmin() external view returns(address);
    function redeem(uint256 redeemTokens) external returns(uint256);
    function redeemUnderlying(uint256 redeemAmount) external returns(uint256);
    function repayBorrow(uint256 repayAmount) external returns(uint256);
    function repayBorrowBehalf(address borrower, uint256 repayAmount) external returns(uint256);
    function reserveFactorMantissa() external view returns(uint256);
    function seize(address liquidator, address borrower, uint256 seizeTokens) external returns(uint256);
    function supplyRatePerBlock() external view returns(uint256);
    function symbol() external view returns(string memory);
    function totalAdminFees() external view returns(uint256);
    function totalBorrows() external view returns(uint256);
    function totalBorrowsCurrent() external returns(uint256);
    function totalFuseFees() external view returns(uint256);
    function totalReserves() external view returns(uint256);
    function totalSupply() external view returns(uint256);
    function transfer(address dst, uint256 amount) external returns(bool);
    function transferFrom(address src, address dst, uint256 amount) external returns(bool);
    function underlying() external view returns(address);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

interface ICEther {
    function mint() external payable;
    function redeem(uint redeemTokens) external returns (uint);
    function redeemUnderlying(uint redeemAmount) external returns (uint);
    function borrow(uint borrowAmount) external returns (uint);
    function getCash() external view returns (uint);
    function exchangeRateStored() external view returns (uint);
    function exchangeRateCurrent() external returns (uint);
    function allowance(address owner, address spender) external view returns (uint256);
    function approve(address spender, uint256 amount) external returns (bool);
    receive() external payable;
}

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

contract CErc20Storage {
    /**
     * @notice Underlying asset for this CToken
     */
    address public underlying;
}

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

contract CompoundLeverageModuleStorage {
    // Mapping of underlying to CToken. If ETH, then map WETH to cETH
    mapping(address => address) public underlyingToCToken;
}

/*
    Copyright 2020 Set Labs Inc.
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;

interface IController {
    function addSet(address _setToken) external;
    function feeRecipient() external view returns(address);
    function getModuleFee(address _module, uint256 _feeType) external view returns(uint256);
    function isModule(address _module) external view returns(bool);
    function isSet(address _setToken) external view returns(bool);
    function isSystemContract(address _contractAddress) external view returns (bool);
    function resourceId(uint256 _id) external view returns(address);
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity >=0.6.10;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IWETH is IERC20 {
    function deposit() external payable;
    function withdraw(uint) external;
}

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { IUniswapV2Router02 } from "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

import { ICurveCalculator } from "../interfaces/external/ICurveCalculator.sol";
import { ICurveAddressProvider } from "../interfaces/external/ICurveAddressProvider.sol";
import { ICurvePoolRegistry } from "../interfaces/external/ICurvePoolRegistry.sol";
import { ICurvePool } from "../interfaces/external/ICurvePool.sol";
import { ISwapRouter} from "../interfaces/external/ISwapRouter.sol";
import { IQuoter } from "../interfaces/IQuoter.sol";
import { IWETH } from "../interfaces/IWETH.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";


/**
 * @title DEXAdapter
 * @author Index Coop
 *
 * Adapter to execute swaps on different DEXes
 */
library DEXAdapter {
    using SafeERC20 for IERC20;
    using PreciseUnitMath for uint256;
    using SafeMath for uint256;

    /* ============ Constants ============= */

    uint256 constant private MAX_UINT256 = type(uint256).max;
    address public constant ETH_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    uint256 public constant ROUNDING_ERROR_MARGIN = 2;

    /* ============ Enums ============ */

    enum Exchange { None, Quickswap, Sushiswap, UniV3, Curve }

    /* ============ Structs ============ */

    struct Addresses {
        address quickRouter;
        address sushiRouter;
        address uniV3Router;
        address uniV3Quoter;
        address curveAddressProvider;
        address curveCalculator;
        // Wrapped native token (WMATIC on polygon)
        address weth;
    }

    struct SwapData {
        address[] path;
        uint24[] fees;
        address pool;
        Exchange exchange;
    }

    struct CurvePoolData {
        int128 nCoins;
        uint256[8] balances;
        uint256 A;
        uint256 fee;
        uint256[8] rates;
        uint256[8] decimals;
    }

    /**
     * Swap exact tokens for another token on a given DEX.
     *
     * @param _addresses    Struct containing relevant smart contract addresses.
     * @param _amountIn     The amount of input token to be spent
     * @param _minAmountOut Minimum amount of output token to receive
     * @param _swapData     Swap data containing the path and fee levels (latter only used for uniV3)
     *
     * @return amountOut    The amount of output tokens
     */
    function swapExactTokensForTokens(
        Addresses memory _addresses,
        uint256 _amountIn,
        uint256 _minAmountOut,
        SwapData memory _swapData
    )
        external
        returns (uint256)
    {
        if (_swapData.path[0] == _swapData.path[_swapData.path.length -1]) {
            return _amountIn;
        }

        if(_swapData.exchange == Exchange.Curve){
            return _swapExactTokensForTokensCurve(
                _swapData.path,
                _swapData.pool,
                _amountIn,
                _minAmountOut,
                _addresses
            );
        }
        if(_swapData.exchange== Exchange.UniV3){
            return _swapExactTokensForTokensUniV3(
                _swapData.path,
                _swapData.fees,
                _amountIn,
                _minAmountOut,
                ISwapRouter(_addresses.uniV3Router)
            );
        } else {
            return _swapExactTokensForTokensUniV2(
                _swapData.path,
                _amountIn,
                _minAmountOut,
                _getRouter(_swapData.exchange, _addresses)
            );
        }
    }


    /**
     * Swap tokens for exact amount of output tokens on a given DEX.
     *
     * @param _addresses    Struct containing relevant smart contract addresses.
     * @param _amountOut    The amount of output token required
     * @param _maxAmountIn  Maximum amount of input token to be spent
     * @param _swapData     Swap data containing the path and fee levels (latter only used for uniV3)
     *
     * @return amountIn     The amount of input tokens spent
     */
    function swapTokensForExactTokens(
        Addresses memory _addresses,
        uint256 _amountOut,
        uint256 _maxAmountIn,
        SwapData memory _swapData
    )
        external
        returns (uint256 amountIn)
    {
        if (_swapData.path[0] == _swapData.path[_swapData.path.length -1]) {
            return _amountOut;
        }

        if(_swapData.exchange == Exchange.Curve){
            return _swapTokensForExactTokensCurve(
                _swapData.path,
                _swapData.pool,
                _amountOut,
                _maxAmountIn,
                _addresses
            );
        }
        if(_swapData.exchange == Exchange.UniV3){
            return _swapTokensForExactTokensUniV3(
                _swapData.path,
                _swapData.fees,
                _amountOut,
                _maxAmountIn,
                ISwapRouter(_addresses.uniV3Router)
            );
        } else {
            return _swapTokensForExactTokensUniV2(
                _swapData.path,
                _amountOut,
                _maxAmountIn,
                _getRouter(_swapData.exchange, _addresses)
            );
        }
    }

    /**
     * Gets the output amount of a token swap.
     *
     * @param _swapData     the swap parameters
     * @param _addresses    Struct containing relevant smart contract addresses.
     * @param _amountIn     the input amount of the trade
     *
     * @return              the output amount of the swap
     */
    function getAmountOut(
        Addresses memory _addresses,
        SwapData memory _swapData,
        uint256 _amountIn
    )
        external
        returns (uint256)
    {
        if (_swapData.path.length == 0 || _swapData.path[0] == _swapData.path[_swapData.path.length-1]) {
            return _amountIn;
        }

        if (_swapData.exchange == Exchange.UniV3) {
            return _getAmountOutUniV3(_swapData, _addresses.uniV3Quoter, _amountIn);
        } else if (_swapData.exchange == Exchange.Curve) {
            (int128 i, int128 j) = _getCoinIndices(
                _swapData.pool,
                _swapData.path[0],
                _swapData.path[1],
                ICurveAddressProvider(_addresses.curveAddressProvider)
            );
            return _getAmountOutCurve(_swapData.pool, i, j, _amountIn, _addresses);
        } else {
            return _getAmountOutUniV2(
                _swapData,
                _getRouter(_swapData.exchange, _addresses),
                _amountIn
            );
        }
    }
    
    /**
     * Gets the input amount of a fixed output swap.
     *
     * @param _swapData     the swap parameters
     * @param _addresses    Struct containing relevant smart contract addresses.
     * @param _amountOut    the output amount of the swap
     *
     * @return              the input amount of the swap
     */
    function getAmountIn(
        Addresses memory _addresses,
        SwapData memory _swapData,
        uint256 _amountOut
    )
        external
        returns (uint256)
    {
        if (_swapData.path.length == 0 || _swapData.path[0] == _swapData.path[_swapData.path.length-1]) {
            return _amountOut;
        }

        if (_swapData.exchange == Exchange.UniV3) {
            return _getAmountInUniV3(_swapData, _addresses.uniV3Quoter, _amountOut);
        } else if (_swapData.exchange == Exchange.Curve) {
            (int128 i, int128 j) = _getCoinIndices(
                _swapData.pool,
                _swapData.path[0],
                _swapData.path[1],
                ICurveAddressProvider(_addresses.curveAddressProvider)
            );
            return _getAmountInCurve(_swapData.pool, i, j, _amountOut, _addresses);
        } else {
            return _getAmountInUniV2(
                _swapData,
                _getRouter(_swapData.exchange, _addresses),
                _amountOut
            );
        }
    }

    /**
     * Sets a max approval limit for an ERC20 token, provided the current allowance
     * is less than the required allownce.
     *
     * @param _token              Token to approve
     * @param _spender            Spender address to approve
     * @param _requiredAllowance  Target allowance to set
     */
    function _safeApprove(
        IERC20 _token,
        address _spender,
        uint256 _requiredAllowance
    )
        internal
    {
        uint256 allowance = _token.allowance(address(this), _spender);
        if (allowance < _requiredAllowance) {
            _token.safeIncreaseAllowance(_spender, MAX_UINT256 - allowance);
        }
    }

    /* ============ Private Methods ============ */

    /**
     *  Execute exact output swap via a UniV2 based DEX. (such as sushiswap);
     *
     * @param _path         List of token address to swap via. 
     * @param _amountOut    The amount of output token required
     * @param _maxAmountIn  Maximum amount of input token to be spent
     * @param _router       Address of the uniV2 router to use
     *
     * @return amountIn    The amount of input tokens spent
     */
    function _swapTokensForExactTokensUniV2(
        address[] memory _path,
        uint256 _amountOut,
        uint256 _maxAmountIn,
        IUniswapV2Router02 _router
    )
        private
        returns (uint256)
    {
        _safeApprove(IERC20(_path[0]), address(_router), _maxAmountIn);
        return _router.swapTokensForExactTokens(_amountOut, _maxAmountIn, _path, address(this), block.timestamp)[0];
    }

    /**
     *  Execute exact output swap via UniswapV3
     *
     * @param _path         List of token address to swap via. (In the order as
     *                      expected by uniV2, the first element being the input toen)
     * @param _fees         List of fee levels identifying the pools to swap via.
     *                      (_fees[0] refers to pool between _path[0] and _path[1])
     * @param _amountOut    The amount of output token required
     * @param _maxAmountIn  Maximum amount of input token to be spent
     * @param _uniV3Router  Address of the uniswapV3 router
     *
     * @return amountIn    The amount of input tokens spent
     */
    function _swapTokensForExactTokensUniV3(
        address[] memory _path,
        uint24[] memory _fees,
        uint256 _amountOut,
        uint256 _maxAmountIn,
        ISwapRouter _uniV3Router
    )
        private
        returns(uint256)
    {

        require(_path.length == _fees.length + 1, "ExchangeIssuance: PATHS_FEES_MISMATCH");
        _safeApprove(IERC20(_path[0]), address(_uniV3Router), _maxAmountIn);
        if(_path.length == 2){
            ISwapRouter.ExactOutputSingleParams memory params =
                ISwapRouter.ExactOutputSingleParams({
                    tokenIn: _path[0],
                    tokenOut: _path[1],
                    fee: _fees[0],
                    recipient: address(this),
                    deadline: block.timestamp,
                    amountOut: _amountOut,
                    amountInMaximum: _maxAmountIn,
                    sqrtPriceLimitX96: 0
                });
            return _uniV3Router.exactOutputSingle(params);
        } else {
            bytes memory pathV3 = _encodePathV3(_path, _fees, true);
            ISwapRouter.ExactOutputParams memory params =
                ISwapRouter.ExactOutputParams({
                    path: pathV3,
                    recipient: address(this),
                    deadline: block.timestamp,
                    amountOut: _amountOut,
                    amountInMaximum: _maxAmountIn
                });
            return _uniV3Router.exactOutput(params);
        }
    }

    /**
     *  Execute exact input swap via Curve
     *
     * @param _path         Path (has to be of length 2)
     * @param _pool         Address of curve pool to use
     * @param _amountIn     The amount of input token to be spent
     * @param _minAmountOut Minimum amount of output token to receive
     * @param _addresses    Struct containing relevant smart contract addresses.
     *
     * @return amountOut    The amount of output token obtained
     */
    function _swapExactTokensForTokensCurve(
        address[] memory _path,
        address _pool,
        uint256 _amountIn,
        uint256 _minAmountOut,
        Addresses memory _addresses
    )
        private
        returns (uint256 amountOut)
    {
        require(_path.length == 2, "ExchangeIssuance: CURVE_WRONG_PATH_LENGTH");
        (int128 i, int128 j) = _getCoinIndices(_pool, _path[0], _path[1], ICurveAddressProvider(_addresses.curveAddressProvider));

        if(_path[0] == ETH_ADDRESS){
            IWETH(_addresses.weth).withdraw(_amountIn);
        }

        amountOut = _exchangeCurve(i, j, _pool, _amountIn, _minAmountOut, _path[0]);

        if(_path[_path.length-1] == ETH_ADDRESS){
            IWETH(_addresses.weth).deposit{value: amountOut}();
        }

    }

    /**
     *  Execute exact output swap via Curve
     *
     * @param _path         Path (has to be of length 2)
     * @param _pool         Address of curve pool to use
     * @param _amountOut    The amount of output token required
     * @param _maxAmountIn  Maximum amount of input token to be spent
     *
     * @return amountOut    The amount of output token obtained
     */
    function _swapTokensForExactTokensCurve(
        address[] memory _path,
        address _pool,
        uint256 _amountOut,
        uint256 _maxAmountIn,
        Addresses memory _addresses
    )
        private
        returns (uint256)
    {
        require(_path.length == 2, "ExchangeIssuance: CURVE_WRONG_PATH_LENGTH");
        (int128 i, int128 j) = _getCoinIndices(_pool, _path[0], _path[1], ICurveAddressProvider(_addresses.curveAddressProvider));

        uint256 amountIn = _getAmountInCurve(
            _pool,
            i,
            j,
            _amountOut,
            _addresses
        );
        require(amountIn <= _maxAmountIn, "ExchangeIssuance: CURVE_OVERSPENT");

        if(_path[0] == ETH_ADDRESS){
            IWETH(_addresses.weth).withdraw(amountIn);
        }

        uint256 returnedAmountOut = _exchangeCurve(i, j, _pool, amountIn, _amountOut, _path[0]);
        require(_amountOut <= returnedAmountOut, "ExchangeIssuance: CURVE_UNDERBOUGHT");

        if(_path[_path.length-1] == ETH_ADDRESS){
            IWETH(_addresses.weth).deposit{ value: returnedAmountOut }();
        }

        return amountIn;
    }
    
    function _exchangeCurve(
        int128 _i,
        int128 _j,
        address _pool,
        uint256 _amountIn,
        uint256 _minAmountOut,
        address _from
    )
        private
        returns (uint256 amountOut)
    {
        ICurvePool pool = ICurvePool(_pool);
        if(_from == ETH_ADDRESS){
            amountOut = pool.exchange{value: _amountIn}(
                _i,
                _j,
                _amountIn,
                _minAmountOut
            );
        }
        else {
            IERC20(_from).approve(_pool, _amountIn);
            amountOut = pool.exchange(
                _i,
                _j,
                _amountIn,
                _minAmountOut
            );
        }
    }

    /**
     *  Calculate required input amount to get a given output amount via Curve swap
     *
     * @param _i            Index of input token as per the ordering of the pools tokens
     * @param _j            Index of output token as per the ordering of the pools tokens
     * @param _pool         Address of curve pool to use
     * @param _amountOut    The amount of output token to be received
     * @param _addresses    Struct containing relevant smart contract addresses.
     *
     * @return amountOut    The amount of output token obtained
     */
    function _getAmountInCurve(
        address _pool,
        int128 _i,
        int128 _j,
        uint256 _amountOut,
        Addresses memory _addresses
    )
        private
        view
        returns (uint256)
    {
        CurvePoolData memory poolData = _getCurvePoolData(_pool, ICurveAddressProvider(_addresses.curveAddressProvider));

        return ICurveCalculator(_addresses.curveCalculator).get_dx(
            poolData.nCoins,
            poolData.balances,
            poolData.A,
            poolData.fee,
            poolData.rates,
            poolData.decimals,
            false,
            _i,
            _j,
            _amountOut
        ) + ROUNDING_ERROR_MARGIN;
    }

    /**
     *  Calculate output amount of a Curve swap
     *
     * @param _i            Index of input token as per the ordering of the pools tokens
     * @param _j            Index of output token as per the ordering of the pools tokens
     * @param _pool         Address of curve pool to use
     * @param _amountIn     The amount of output token to be received
     * @param _addresses    Struct containing relevant smart contract addresses.
     *
     * @return amountOut    The amount of output token obtained
     */
    function _getAmountOutCurve(
        address _pool,
        int128 _i,
        int128 _j,
        uint256 _amountIn,
        Addresses memory _addresses
    )
        private
        view
        returns (uint256)
    {
        return ICurvePool(_pool).get_dy(_i, _j, _amountIn);
    }

    /**
     *  Get metadata on curve pool required to calculate input amount from output amount
     *
     * @param _pool                    Address of curve pool to use
     * @param _curveAddressProvider    Address of curve address provider
     *
     * @return Struct containing all required data to perform getAmountInCurve calculation
     */
    function _getCurvePoolData(
        address _pool,
        ICurveAddressProvider _curveAddressProvider
    ) private view returns(CurvePoolData memory)
    {
        ICurvePoolRegistry registry = ICurvePoolRegistry(_curveAddressProvider.get_registry());

        return CurvePoolData(
            int128(registry.get_n_coins(_pool)[0]),
            registry.get_balances(_pool),
            registry.get_A(_pool),
            registry.get_fees(_pool)[0],
            registry.get_rates(_pool),
            registry.get_decimals(_pool)
        );
    }
    
    /**
     *  Get token indices for given pool
     *  NOTE: This was necessary sine the get_coin_indices function of the CurvePoolRegistry did not work for StEth/ETH pool
     *
     * @param _pool                    Address of curve pool to use
     * @param _from                    Address of input token
     * @param _to                      Address of output token
     * @param _curveAddressProvider    Address of curve address provider
     *
     * @return i Index of input token
     * @return j Index of output token
     */
    function _getCoinIndices(
        address _pool,
        address _from,
        address _to,
        ICurveAddressProvider _curveAddressProvider
    )
        private
        view
        returns (int128 i, int128 j)
    {
        ICurvePoolRegistry registry = ICurvePoolRegistry(_curveAddressProvider.get_registry());

        // Set to out of range index to signal the coin is not found yet
        i = 9;
        j = 9;
        address[8] memory poolCoins = registry.get_coins(_pool);

        for(uint256 k = 0; k < 8; k++){
            if(poolCoins[k] == _from){
                i = int128(k);
            }
            else if(poolCoins[k] == _to){
                j = int128(k);
            }
            // ZeroAddress signals end of list
            if(poolCoins[k] == address(0) || (i != 9 && j != 9)){
                break;
            }
        }

        require(i != 9, "ExchangeIssuance: CURVE_FROM_NOT_FOUND");
        require(j != 9, "ExchangeIssuance: CURVE_TO_NOT_FOUND");

        return (i, j);
    }

    /**
     *  Execute exact input swap via UniswapV3
     *
     * @param _path         List of token address to swap via. 
     * @param _fees         List of fee levels identifying the pools to swap via.
     *                      (_fees[0] refers to pool between _path[0] and _path[1])
     * @param _amountIn     The amount of input token to be spent
     * @param _minAmountOut Minimum amount of output token to receive
     * @param _uniV3Router  Address of the uniswapV3 router
     *
     * @return amountOut    The amount of output token obtained
     */
    function _swapExactTokensForTokensUniV3(
        address[] memory _path,
        uint24[] memory _fees,
        uint256 _amountIn,
        uint256 _minAmountOut,
        ISwapRouter _uniV3Router
    )
        private
        returns (uint256)
    {
        require(_path.length == _fees.length + 1, "ExchangeIssuance: PATHS_FEES_MISMATCH");
        _safeApprove(IERC20(_path[0]), address(_uniV3Router), _amountIn);
        if(_path.length == 2){
            ISwapRouter.ExactInputSingleParams memory params =
                ISwapRouter.ExactInputSingleParams({
                    tokenIn: _path[0],
                    tokenOut: _path[1],
                    fee: _fees[0],
                    recipient: address(this),
                    deadline: block.timestamp,
                    amountIn: _amountIn,
                    amountOutMinimum: _minAmountOut,
                    sqrtPriceLimitX96: 0
                });
            return _uniV3Router.exactInputSingle(params);
        } else {
            bytes memory pathV3 = _encodePathV3(_path, _fees, false);
            ISwapRouter.ExactInputParams memory params =
                ISwapRouter.ExactInputParams({
                    path: pathV3,
                    recipient: address(this),
                    deadline: block.timestamp,
                    amountIn: _amountIn,
                    amountOutMinimum: _minAmountOut
                });
            uint amountOut = _uniV3Router.exactInput(params);
            return amountOut;
        }
    }

    /**
     *  Execute exact input swap via UniswapV2
     *
     * @param _path         List of token address to swap via. 
     * @param _amountIn     The amount of input token to be spent
     * @param _minAmountOut Minimum amount of output token to receive
     * @param _router       Address of uniV2 router to use
     *
     * @return amountOut    The amount of output token obtained
     */
    function _swapExactTokensForTokensUniV2(
        address[] memory _path,
        uint256 _amountIn,
        uint256 _minAmountOut,
        IUniswapV2Router02 _router
    )
        private
        returns (uint256)
    {
        _safeApprove(IERC20(_path[0]), address(_router), _amountIn);
        // NOTE: The following was changed from always returning result at position [1] to returning the last element of the result array
        // With this change, the actual output is correctly returned also for multi-hop swaps
        // See https://github.com/IndexCoop/index-coop-smart-contracts/pull/116 
        uint256[] memory result = _router.swapExactTokensForTokens(_amountIn, _minAmountOut, _path, address(this), block.timestamp);
        // result = uint[] memory	The input token amount and all subsequent output token amounts.
        // we are usually only interested in the actual amount of the output token (so result element at the last place)
        return result[result.length-1];
    }

    /**
     * Gets the output amount of a token swap on Uniswap V2
     *
     * @param _swapData     the swap parameters
     * @param _router       the uniswap v2 router address
     * @param _amountIn     the input amount of the trade
     *
     * @return              the output amount of the swap
     */
    function _getAmountOutUniV2(
        SwapData memory _swapData,
        IUniswapV2Router02 _router,
        uint256 _amountIn
    )
        private
        view
        returns (uint256)
    {
        return _router.getAmountsOut(_amountIn, _swapData.path)[_swapData.path.length-1];
    }

    /**
     * Gets the input amount of a fixed output swap on Uniswap V2.
     *
     * @param _swapData     the swap parameters
     * @param _router       the uniswap v2 router address
     * @param _amountOut    the output amount of the swap
     *
     * @return              the input amount of the swap
     */
    function _getAmountInUniV2(
        SwapData memory _swapData,
        IUniswapV2Router02 _router,
        uint256 _amountOut
    )
        private
        view
        returns (uint256)
    {
        return _router.getAmountsIn(_amountOut, _swapData.path)[0];
    }

    /**
     * Gets the output amount of a token swap on Uniswap V3.
     *
     * @param _swapData     the swap parameters
     * @param _quoter       the uniswap v3 quoter
     * @param _amountIn     the input amount of the trade
     *
     * @return              the output amount of the swap
     */

    function _getAmountOutUniV3(
        SwapData memory _swapData,
        address _quoter,
        uint256 _amountIn
    )
        private
        returns (uint256)
    {
        bytes memory path = _encodePathV3(_swapData.path, _swapData.fees, false);
        return IQuoter(_quoter).quoteExactInput(path, _amountIn);
    }

    /**
     * Gets the input amount of a fixed output swap on Uniswap V3.
     *
     * @param _swapData     the swap parameters
     * @param _quoter       uniswap v3 quoter
     * @param _amountOut    the output amount of the swap
     *
     * @return              the input amount of the swap
     */
    function _getAmountInUniV3(
        SwapData memory _swapData,
        address _quoter,
        uint256 _amountOut
    )
        private
        returns (uint256)
    {
        bytes memory path = _encodePathV3(_swapData.path, _swapData.fees, true);
        return IQuoter(_quoter).quoteExactOutput(path, _amountOut);
    }

    /**
     * Encode path / fees to bytes in the format expected by UniV3 router
     *
     * @param _path          List of token address to swap via (starting with input token)
     * @param _fees          List of fee levels identifying the pools to swap via.
     *                       (_fees[0] refers to pool between _path[0] and _path[1])
     * @param _reverseOrder  Boolean indicating if path needs to be reversed to start with output token.
     *                       (which is the case for exact output swap)
     *
     * @return encodedPath   Encoded path to be forwared to uniV3 router
     */
    function _encodePathV3(
        address[] memory _path,
        uint24[] memory _fees,
        bool _reverseOrder
    )
        private
        pure
        returns(bytes memory encodedPath)
    {
        if(_reverseOrder){
            encodedPath = abi.encodePacked(_path[_path.length-1]);
            for(uint i = 0; i < _fees.length; i++){
                uint index = _fees.length - i - 1;
                encodedPath = abi.encodePacked(encodedPath, _fees[index], _path[index]);
            }
        } else {
            encodedPath = abi.encodePacked(_path[0]);
            for(uint i = 0; i < _fees.length; i++){
                encodedPath = abi.encodePacked(encodedPath, _fees[i], _path[i+1]);
            }
        }
    }

    function _getRouter(
        Exchange _exchange,
        Addresses memory _addresses
    )
        private
        pure
        returns (IUniswapV2Router02)
    {
        return IUniswapV2Router02(
            (_exchange == Exchange.Quickswap) ? _addresses.quickRouter : _addresses.sushiRouter
        );
    }
}

pragma solidity 0.6.10;

/**
  * @title Careful Math
  * @author Compound
  * @notice Derived from OpenZeppelin's SafeMath library
  *         https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/math/SafeMath.sol
  */
contract CarefulMath {

    /**
     * @dev Possible error codes that we can return
     */
    enum MathError {
        NO_ERROR,
        DIVISION_BY_ZERO,
        INTEGER_OVERFLOW,
        INTEGER_UNDERFLOW
    }

    /**
    * @dev Multiplies two numbers, returns an error on overflow.
    */
    function mulUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (a == 0) {
            return (MathError.NO_ERROR, 0);
        }

        uint c = a * b;

        if (c / a != b) {
            return (MathError.INTEGER_OVERFLOW, 0);
        } else {
            return (MathError.NO_ERROR, c);
        }
    }

    /**
    * @dev Integer division of two numbers, truncating the quotient.
    */
    function divUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (b == 0) {
            return (MathError.DIVISION_BY_ZERO, 0);
        }

        return (MathError.NO_ERROR, a / b);
    }

    /**
    * @dev Subtracts two numbers, returns an error on overflow (i.e. if subtrahend is greater than minuend).
    */
    function subUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (b <= a) {
            return (MathError.NO_ERROR, a - b);
        } else {
            return (MathError.INTEGER_UNDERFLOW, 0);
        }
    }

    /**
    * @dev Adds two numbers, returns an error on overflow.
    */
    function addUInt(uint a, uint b) internal pure returns (MathError, uint) {
        uint c = a + b;

        if (c >= a) {
            return (MathError.NO_ERROR, c);
        } else {
            return (MathError.INTEGER_OVERFLOW, 0);
        }
    }

    /**
    * @dev add a and b and then subtract c
    */
    function addThenSubUInt(uint a, uint b, uint c) internal pure returns (MathError, uint) {
        (MathError err0, uint sum) = addUInt(a, b);

        if (err0 != MathError.NO_ERROR) {
            return (err0, 0);
        }

        return subUInt(sum, c);
    }
}


/**
 * @title Exponential module for storing fixed-decision decimals
 * @author Compound
 * @notice Exp is a struct which stores decimals with a fixed precision of 18 decimal places.
 *         Thus, if we wanted to store the 5.1, mantissa would store 5.1e18. That is:
 *         `Exp({mantissa: 5100000000000000000})`.
 */
contract Exponential is CarefulMath {
    uint constant expScale = 1e18;
    uint constant halfExpScale = expScale/2;
    uint constant mantissaOne = expScale;

    struct Exp {
        uint mantissa;
    }

    /**
     * @dev Creates an exponential from numerator and denominator values.
     *      Note: Returns an error if (`num` * 10e18) > MAX_INT,
     *            or if `denom` is zero.
     */
    function getExp(uint num, uint denom) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint scaledNumerator) = mulUInt(num, expScale);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        (MathError err1, uint rational) = divUInt(scaledNumerator, denom);
        if (err1 != MathError.NO_ERROR) {
            return (err1, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: rational}));
    }

    /**
     * @dev Adds two exponentials, returning a new exponential.
     */
    function addExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        (MathError error, uint result) = addUInt(a.mantissa, b.mantissa);

        return (error, Exp({mantissa: result}));
    }

    /**
     * @dev Subtracts two exponentials, returning a new exponential.
     */
    function subExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        (MathError error, uint result) = subUInt(a.mantissa, b.mantissa);

        return (error, Exp({mantissa: result}));
    }

    /**
     * @dev Multiply an Exp by a scalar, returning a new Exp.
     */
    function mulScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint scaledMantissa) = mulUInt(a.mantissa, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: scaledMantissa}));
    }

    /**
     * @dev Multiply an Exp by a scalar, then truncate to return an unsigned integer.
     */
    function mulScalarTruncate(Exp memory a, uint scalar) pure internal returns (MathError, uint) {
        (MathError err, Exp memory product) = mulScalar(a, scalar);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return (MathError.NO_ERROR, truncate(product));
    }

    /**
     * @dev Multiply an Exp by a scalar, truncate, then add an to an unsigned integer, returning an unsigned integer.
     */
    function mulScalarTruncateAddUInt(Exp memory a, uint scalar, uint addend) pure internal returns (MathError, uint) {
        (MathError err, Exp memory product) = mulScalar(a, scalar);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return addUInt(truncate(product), addend);
    }

    /**
     * @dev Divide an Exp by a scalar, returning a new Exp.
     */
    function divScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint descaledMantissa) = divUInt(a.mantissa, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: descaledMantissa}));
    }

    /**
     * @dev Divide a scalar by an Exp, returning a new Exp.
     */
    function divScalarByExp(uint scalar, Exp memory divisor) pure internal returns (MathError, Exp memory) {
        /*
          We are doing this as:
          getExp(mulUInt(expScale, scalar), divisor.mantissa)

          How it works:
          Exp = a / b;
          Scalar = s;
          `s / (a / b)` = `b * s / a` and since for an Exp `a = mantissa, b = expScale`
        */
        (MathError err0, uint numerator) = mulUInt(expScale, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }
        return getExp(numerator, divisor.mantissa);
    }

    /**
     * @dev Divide a scalar by an Exp, then truncate to return an unsigned integer.
     */
    function divScalarByExpTruncate(uint scalar, Exp memory divisor) pure internal returns (MathError, uint) {
        (MathError err, Exp memory fraction) = divScalarByExp(scalar, divisor);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return (MathError.NO_ERROR, truncate(fraction));
    }

    /**
     * @dev Multiplies two exponentials, returning a new exponential.
     */
    function mulExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {

        (MathError err0, uint doubleScaledProduct) = mulUInt(a.mantissa, b.mantissa);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        // We add half the scale before dividing so that we get rounding instead of truncation.
        //  See "Listing 6" and text above it at https://accu.org/index.php/journals/1717
        // Without this change, a result like 6.6...e-19 will be truncated to 0 instead of being rounded to 1e-18.
        (MathError err1, uint doubleScaledProductWithHalfScale) = addUInt(halfExpScale, doubleScaledProduct);
        if (err1 != MathError.NO_ERROR) {
            return (err1, Exp({mantissa: 0}));
        }

        (MathError err2, uint product) = divUInt(doubleScaledProductWithHalfScale, expScale);
        // The only error `div` can return is MathError.DIVISION_BY_ZERO but we control `expScale` and it is not zero.
        assert(err2 == MathError.NO_ERROR);

        return (MathError.NO_ERROR, Exp({mantissa: product}));
    }

    /**
     * @dev Multiplies two exponentials given their mantissas, returning a new exponential.
     */
    function mulExp(uint a, uint b) pure internal returns (MathError, Exp memory) {
        return mulExp(Exp({mantissa: a}), Exp({mantissa: b}));
    }

    /**
     * @dev Multiplies three exponentials, returning a new exponential.
     */
    function mulExp3(Exp memory a, Exp memory b, Exp memory c) pure internal returns (MathError, Exp memory) {
        (MathError err, Exp memory ab) = mulExp(a, b);
        if (err != MathError.NO_ERROR) {
            return (err, ab);
        }
        return mulExp(ab, c);
    }

    /**
     * @dev Divides two exponentials, returning a new exponential.
     *     (a/scale) / (b/scale) = (a/scale) * (scale/b) = a/b,
     *  which we can scale as an Exp by calling getExp(a.mantissa, b.mantissa)
     */
    function divExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        return getExp(a.mantissa, b.mantissa);
    }

    /**
     * @dev Truncates the given exp to a whole number value.
     *      For example, truncate(Exp{mantissa: 15 * expScale}) = 15
     */
    function truncate(Exp memory exp) pure internal returns (uint) {
        // Note: We are not using careful math here as we're performing a division that cannot fail
        return exp.mantissa / expScale;
    }

    /**
     * @dev Checks if first Exp is less than second Exp.
     */
    function lessThanExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa < right.mantissa; //TODO: Add some simple tests and this in another PR yo.
    }

    /**
     * @dev Checks if left Exp <= right Exp.
     */
    function lessThanOrEqualExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa <= right.mantissa;
    }

    /**
     * @dev returns true if Exp is exactly zero
     */
    function isZeroExp(Exp memory value) pure internal returns (bool) {
        return value.mantissa == 0;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.5.0;

import '@uniswap/v2-core/contracts/interfaces/IUniswapV2Pair.sol';

import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

library UniSushiV2Library {
    using SafeMath for uint;

    // returns sorted token addresses, used to handle return values from pairs sorted in this order
    function sortTokens(address tokenA, address tokenB) internal pure returns (address token0, address token1) {
        require(tokenA != tokenB, 'UniswapV2Library: IDENTICAL_ADDRESSES');
        (token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
        require(token0 != address(0), 'UniswapV2Library: ZERO_ADDRESS');
    }

    // fetches and sorts the reserves for a pair
    function getReserves(address pair, address tokenA, address tokenB) internal view returns (uint reserveA, uint reserveB) {
        (address token0,) = sortTokens(tokenA, tokenB);
        (uint reserve0, uint reserve1,) = IUniswapV2Pair(pair).getReserves();
        (reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
    }

    // given some amount of an asset and pair reserves, returns an equivalent amount of the other asset
    function quote(uint amountA, uint reserveA, uint reserveB) internal pure returns (uint amountB) {
        require(amountA > 0, 'UniswapV2Library: INSUFFICIENT_AMOUNT');
        require(reserveA > 0 && reserveB > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
        amountB = amountA.mul(reserveB) / reserveA;
    }

    // given an input amount of an asset and pair reserves, returns the maximum output amount of the other asset
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) internal pure returns (uint amountOut) {
        require(amountIn > 0, 'UniswapV2Library: INSUFFICIENT_INPUT_AMOUNT');
        require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
        uint amountInWithFee = amountIn.mul(997);
        uint numerator = amountInWithFee.mul(reserveOut);
        uint denominator = reserveIn.mul(1000).add(amountInWithFee);
        amountOut = numerator / denominator;
    }

    // given an output amount of an asset and pair reserves, returns a required input amount of the other asset
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) internal pure returns (uint amountIn) {
        require(amountOut > 0, 'UniswapV2Library: INSUFFICIENT_OUTPUT_AMOUNT');
        require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
        uint numerator = reserveIn.mul(amountOut).mul(1000);
        uint denominator = reserveOut.sub(amountOut).mul(997);
        amountIn = (numerator / denominator).add(1);
    }

    // performs chained getAmountOut calculations on any number of pairs
    function getAmountsOut(address factory, uint amountIn, address[] memory path) internal view returns (uint[] memory amounts) {
        require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
        amounts = new uint[](path.length);
        amounts[0] = amountIn;
        for (uint i; i < path.length - 1; i++) {
            (uint reserveIn, uint reserveOut) = getReserves(factory, path[i], path[i + 1]);
            amounts[i + 1] = getAmountOut(amounts[i], reserveIn, reserveOut);
        }
    }

    // performs chained getAmountIn calculations on any number of pairs
    function getAmountsIn(address factory, uint amountOut, address[] memory path) internal view returns (uint[] memory amounts) {
        require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
        amounts = new uint[](path.length);
        amounts[amounts.length - 1] = amountOut;
        for (uint i = path.length - 1; i > 0; i--) {
            (uint reserveIn, uint reserveOut) = getReserves(factory, path[i - 1], path[i]);
            amounts[i - 1] = getAmountIn(amounts[i], reserveIn, reserveOut);
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

// Implementation: https://etherscan.io/address/0xc1DB00a8E5Ef7bfa476395cdbcc98235477cDE4E#readContract
interface ICurveCalculator {
    function get_dx(
        int128 n_coins,
        uint256[8] memory balances,
        uint256 amp,
        uint256 fee,
        uint256[8] memory rates,
        uint256[8] memory precisions,
        bool underlying,
        int128 i,
        int128 j,
        uint256 dy
    ) external view returns(uint256);

    function get_dy(
        int128 n_coins,
        uint256[8] memory balances,
        uint256 amp,
        uint256 fee,
        uint256[8] memory rates,
        uint256[8] memory precisions,
        bool underlying,
        int128 i,
        int128 j,
        uint256 dx
    ) external view returns(uint256);
}

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

// Implementation: https://etherscan.io/address/0x0000000022d53366457f9d5e68ec105046fc4383#readContract
interface ICurveAddressProvider {
    function get_registry() external view returns(address);
    function get_address(uint256 _id) external view returns(address);
}

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

// Implementation: https://etherscan.io/address/0x90E00ACe148ca3b23Ac1bC8C240C2a7Dd9c2d7f5#readContract
interface ICurvePoolRegistry {
    // amplification factor
    function get_A(address _pool) external view returns(uint256);
    function get_balances(address _pool) external view returns(uint256[8] memory);
    function get_coins(address _pool) external view returns(address[8] memory);
    function get_coin_indices(address _pool, address _from, address _to) external view returns(int128, int128, bool);
    function get_decimals(address _pool) external view returns(uint256[8] memory);
    function get_n_coins(address _pool) external view returns(uint256[2] memory);
    function get_fees(address _pool) external view returns(uint256[2] memory);
    function get_rates(address _pool) external view returns(uint256[8] memory);
}

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

// Implementation: https://etherscan.io/address/0x8e764bE4288B842791989DB5b8ec067279829809#writeContract
interface ICurvePool {
    function exchange(
        int128 i,
        int128 j,
        uint256 dx,
        uint256 min_dy
    ) external payable returns (uint256);

    function get_dy(
        int128 i,
        int128 j,
        uint256 dx
    ) external view returns (uint256);
}

pragma solidity >=0.6.2;

import './IUniswapV2Router01.sol';

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;


import { 
    FlashMintLeveragedForCompound,
    ISetToken,
    DEXAdapter,
    IController,
    IDebtIssuanceModule,
    ICompoundLeverageModule,
    IERC20
} from "../exchangeIssuance/FlashMintLeveragedForCompound.sol";


contract FlashMintLeveragedCompMock is FlashMintLeveragedForCompound {
    constructor(
        DEXAdapter.Addresses memory _dexAddresses,
        IController _setController,
        IDebtIssuanceModule _debtIssuanceModule,
        ICompoundLeverageModule _compoundLeverageModule,
        address _aaveAddressProvider,
        address _cEther
    ) public
    FlashMintLeveragedForCompound(_dexAddresses, _setController,_debtIssuanceModule, _compoundLeverageModule, _aaveAddressProvider, _cEther )
    {}


    function liquidateCollateralTokens(
        uint256 _collateralTokenSpent,
        ISetToken _setToken,
        uint256 _setAmount,
        address _originalSender,
        address _outputToken,
        uint256 _minAmountOutputToken,
        address _collateralToken,
        uint256 _collateralAmount,
        DEXAdapter.SwapData memory _swapData
    ) external {
        _liquidateCollateralTokens(
            _collateralTokenSpent,
            _setToken,
            _setAmount,
            _originalSender,
            _outputToken,
            _minAmountOutputToken,
            _collateralToken,
            _collateralAmount,
            _swapData
        );
    }

    function liquidateCollateralTokensForETH(
        address _collateralToken,
        uint256 _collateralRemaining,
        address _originalSender,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapData
    )
    external
    returns(uint256)
    {
        return _liquidateCollateralTokensForETH(
            _collateralToken,
            _collateralRemaining,
            _originalSender,
            _minAmountOutputToken,
            _swapData
        );
    }

    function transferShortfallFromSender(
        address _token,
        uint256 _shortfall,
        address _originalSender
    )
    external
    {
        _transferShortfallFromSender(
            _token,
            _shortfall,
            _originalSender
        );
    }

    function makeUpShortfallWithERC20(
        address _collateralToken,
        uint256 _collateralTokenShortfall,
        address _originalSender,
        IERC20 _inputToken,
        uint256 _maxAmountInputToken,
        DEXAdapter.SwapData memory _swapData
    )
    external
    returns (uint256)
    {
        return _makeUpShortfallWithERC20(
            _collateralToken,
            _collateralTokenShortfall,
            _originalSender,
            _inputToken,
            _maxAmountInputToken,
            _swapData
        );
    }
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity ^0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Math } from  "@openzeppelin/contracts/math/Math.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

// Inheritance
import { RewardsDistributionRecipient } from  "./RewardsDistributionRecipient.sol";

// NOTE: V2 allows setting of rewardsDuration in constructor
contract StakingRewardsV2 is RewardsDistributionRecipient, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    /* ========== STATE VARIABLES ========== */

    /// @notice Token to be distributed to stakers
    IERC20 public rewardsToken;

    /// @notice Token to be staked in the contract
    IERC20 public stakingToken;

    /// @notice Timestamp at which the staking rewards end
    uint256 public periodFinish = 0;

    /// @notice Number of tokens rewarded per unit time
    uint256 public rewardRate = 0;

    /// @notice Duration for which rewards are applied
    uint256 public rewardsDuration;

    uint256 public lastUpdateTime;
    uint256 public rewardPerTokenStored;

    mapping(address => uint256) public userRewardPerTokenPaid;

    /// @notice Accumulated number of `rewardsToken` per address remaining to be claimed.
    ///         Once a staker claims the rewards, it is reset to 0.
    mapping(address => uint256) public rewards;

    /// @notice Total number of staked tokens
    uint256 private _totalSupply;

    /// @notice Number of staked tokens per address
    mapping(address => uint256) private _balances;

    /* ========== CONSTRUCTOR ========== */

    constructor(
        address _rewardsDistribution,
        address _rewardsToken,
        address _stakingToken,
        uint256 _rewardsDuration
    ) public {
        rewardsToken = IERC20(_rewardsToken);
        stakingToken = IERC20(_stakingToken);
        rewardsDistribution = _rewardsDistribution;
        rewardsDuration = _rewardsDuration;
    }

    /* ========== VIEWS ========== */

    // Number of total staked tokens
    function totalSupply() external view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @notice Get the number of tokens staked by the `account`
     * @param account The address of the account to get the balance of
     * @return The number of tokens staked
     */
    function balanceOf(address account) external view returns (uint256) {
        return _balances[account];
    }

    /// @return last time when the reward was applied.
    function lastTimeRewardApplicable() public view returns (uint256) {
        return Math.min(block.timestamp, periodFinish);
    }

    function rewardPerToken() public view returns (uint256) {
        if (_totalSupply == 0) {
            return rewardPerTokenStored;
        }
        return
            rewardPerTokenStored.add(
                lastTimeRewardApplicable().sub(lastUpdateTime).mul(rewardRate).mul(1e18).div(_totalSupply)
            );
    }

    /**
     * @notice Accumulated number of `rewardsToken` remaining to be claimed by `address`.
     */
    function earned(address account) public view returns (uint256) {
        return _balances[account].mul(rewardPerToken().sub(userRewardPerTokenPaid[account])).div(1e18).add(rewards[account]);
    }

    /// @notice Get the number of rewardsToken to be rewarded for `rewardsDuration`
    function getRewardForDuration() external view returns (uint256) {
        return rewardRate.mul(rewardsDuration);
    }

    /* ========== MUTATIVE FUNCTIONS ========== */

    /// @notice Transfer `amount` of stakingToken from `msg.sender` to this contract for staking
    function stake(uint256 amount) external nonReentrant updateReward(msg.sender) {
        require(amount > 0, "Cannot stake 0");
        _totalSupply = _totalSupply.add(amount);
        _balances[msg.sender] = _balances[msg.sender].add(amount);
        stakingToken.safeTransferFrom(msg.sender, address(this), amount);
        emit Staked(msg.sender, amount);
    }

    /// @notice Unstake `amount` number of staked tokens by `msg.sender`
    function withdraw(uint256 amount) public nonReentrant updateReward(msg.sender) {
        require(amount > 0, "Cannot withdraw 0");
        _totalSupply = _totalSupply.sub(amount);
        _balances[msg.sender] = _balances[msg.sender].sub(amount);
        stakingToken.safeTransfer(msg.sender, amount);
        emit Withdrawn(msg.sender, amount);
    }

    /// @notice Transfer the staking rewards from contract to `msg.sender`
    function getReward() public nonReentrant updateReward(msg.sender) {
        uint256 reward = rewards[msg.sender];
        if (reward > 0) {
            rewards[msg.sender] = 0;
            rewardsToken.safeTransfer(msg.sender, reward);
            emit RewardPaid(msg.sender, reward);
        }
    }

    /// @notice Unstake all the staked tokens by `msg.sender` and claim the rewards
    function exit() external {
        withdraw(_balances[msg.sender]);
        getReward();
    }

    /* ========== RESTRICTED FUNCTIONS ========== */

    /**
     * @notice Update the number of `rewardsToken` to be rewarded to stakers.
               The updated reward is only applicable from the next block.
               If the staking period is over, ie, if the current block occurs at or after
               `periodFinish` has passed, a fresh reward period starts with
               duration=`rewardsDuration`.
     * @param reward number of `rewardsToken` to to be rewarded from now on.
     */
    function notifyRewardAmount(uint256 reward) external override onlyRewardsDistribution updateReward(address(0)) {
        if (block.timestamp >= periodFinish) {
            rewardRate = reward.div(rewardsDuration);
        } else {
            uint256 remaining = periodFinish.sub(block.timestamp);
            uint256 leftover = remaining.mul(rewardRate);
            rewardRate = reward.add(leftover).div(rewardsDuration);
        }

        // Ensure the provided reward amount is not more than the balance in the contract.
        // This keeps the reward rate in the right range, preventing overflows due to
        // very high values of rewardRate in the earned and rewardsPerToken functions;
        // Reward + leftover must be less than 2^256 / 10^18 to avoid overflow.
        uint balance = rewardsToken.balanceOf(address(this));
        require(rewardRate <= balance.div(rewardsDuration), "Provided reward too high");

        lastUpdateTime = block.timestamp;
        periodFinish = block.timestamp.add(rewardsDuration);
        emit RewardAdded(reward);
    }

    /* ========== MODIFIERS ========== */

    /// @notice Update rewards for an address along with bookkeeping variables
    modifier updateReward(address account) {
        rewardPerTokenStored = rewardPerToken();
        lastUpdateTime = lastTimeRewardApplicable();
        if (account != address(0)) {
            rewards[account] = earned(account);
            userRewardPerTokenPaid[account] = rewardPerTokenStored;
        }
        _;
    }

    /* ========== EVENTS ========== */

    event RewardAdded(uint256 reward);
    event Staked(address indexed user, uint256 amount);
    event Withdrawn(address indexed user, uint256 amount);
    event RewardPaid(address indexed user, uint256 reward);
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity ^0.6.10;

abstract contract RewardsDistributionRecipient {
    address public rewardsDistribution;

    function notifyRewardAmount(uint256 reward) external virtual;

    modifier onlyRewardsDistribution() {
        require(msg.sender == rewardsDistribution, "Caller is not RewardsDistribution contract");
        _;
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;


import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

import { StakingRewardsV2 } from "../staking/StakingRewardsV2.sol";
import { IMasterChef } from "../interfaces/IMasterChef.sol";
import { IPair } from "../interfaces/IPair.sol";
import { Vesting } from "./Vesting.sol";


/**
 * @title IndexPowah
 * @author Set Protocol
 *
 * An ERC20 token used for tracking the voting power for the Index Coop. The mutative functions of
 * the ERC20 interface have been disabled since the token is only designed to count votes for the
 * sake of utilizing Snapshot's erc20-balance-of strategy. This contract is inspired by Sushiswap's
 * SUSHIPOWAH contract which serves the same purpose.
 */
contract IndexPowah is IERC20, Ownable {

    using SafeMath for uint256;

    IERC20 public indexToken;

    IMasterChef public masterChef;
    uint256 public masterChefId;
    IPair public uniPair;
    IPair public sushiPair;

    StakingRewardsV2[] public farms;
    Vesting[] public vesting;

    /**
     * Sets the appropriate state variables for the contract.
     *
     * @param _owner        owner of this contract
     * @param _indexToken   Index Coop's governance token contract
     * @param _uniPair      INDEX-WETH Uniswap pair
     * @param _sushiPair    INDEX-WETH Sushiswap pair
     * @param _masterChef   Sushiswap MasterChef (Onsen) contract
     * @param _farms        array of Index Coop staking farms
     * @param _vesting      array of vesting contracts from the index sale and full time contributors
     */
    constructor(
        address _owner,
        IERC20 _indexToken,
        IPair _uniPair,
        IPair _sushiPair,
        IMasterChef _masterChef,
        uint256 _masterChefId,
        StakingRewardsV2[] memory _farms,
        Vesting[] memory _vesting
    )
        public
    {
        indexToken = _indexToken;
        uniPair = _uniPair;
        sushiPair = _sushiPair;
        masterChef = _masterChef;
        masterChefId = _masterChefId;
        farms = _farms;
        vesting = _vesting;

        transferOwnership(_owner);
    }

    /**
     * Computes an address's balance of IndexPowah. Balances can not be transfered in the traditional way,
     * but are instead computed by the amount of index that an account directly hold, or indirectly holds
     * through the staking contracts, vesting contracts, uniswap, and sushiswap.
     *
     * @param _account  the address of the voter
     */
    function balanceOf(address _account) public view override returns (uint256) {
        uint256 indexAmount = indexToken.balanceOf(_account);
        uint256 unclaimedInFarms = _getFarmVotes(_account);
        uint256 vestingVotes = _getVestingVotes(_account);
        uint256 dexVotes = _getDexVotes(_account, uniPair) + _getDexVotes(_account, sushiPair) + _getMasterChefVotes(_account);

        return indexAmount + unclaimedInFarms + vestingVotes + dexVotes;
    }

    /**
     * ONLY OWNER: Adds new Index farms to be tracked
     *
     * @param _newFarms list of new farms to be tracked
     */
    function addFarms(StakingRewardsV2[] calldata _newFarms) external onlyOwner {
        for (uint256 i = 0; i < _newFarms.length; i++) {
            farms.push(_newFarms[0]);
        }
    }

    /**
     * ONLY OWNER: Adds new Index vesting contracts to be tracked
     *
     * @param _newVesting   list of new vesting contracts to be tracked
     */
    function addVesting(Vesting[] calldata _newVesting) external onlyOwner {
        for (uint256 i = 0; i < _newVesting.length; i++) {
            vesting.push(_newVesting[i]);
        }
    }

    /**
     * ONLY OWNER: Updates the MasterChef contract and pool ID
     *
     * @param _newMasterChef    address of the new MasterChef contract
     * @param _newMasterChefId  new pool id for the index-eth MasterChef rewards
     */
    function updateMasterChef(IMasterChef _newMasterChef, uint256 _newMasterChefId) external onlyOwner {
        masterChef = _newMasterChef;
        masterChefId = _newMasterChefId;
    }

    function _getFarmVotes(address _account) internal view returns (uint256) {
        uint256 sum = 0;
        for (uint256 i = 0; i < farms.length; i++) {
            sum += farms[i].earned(_account);
        }
        return sum;
    }

    function _getVestingVotes(address _account) internal view returns (uint256) {
        uint256 sum = 0;
        for (uint256 i = 0; i < vesting.length; i++) {
            if(vesting[i].recipient() == _account) {
                sum += indexToken.balanceOf(address(vesting[i]));
            }
        }
        return sum;
    }

    function _getDexVotes(address _account, IPair pair) internal view returns (uint256) {
        uint256 lpBalance = pair.balanceOf(_account);
        return _getDexVotesFromBalance(lpBalance, pair);
    }

    function _getMasterChefVotes(address _account) internal view returns (uint256) {
        (uint256 lpBalance,) = masterChef.userInfo(masterChefId, _account);
        return _getDexVotesFromBalance(lpBalance, sushiPair);
    }

    function _getDexVotesFromBalance(uint256 lpBalance, IPair pair) internal view returns (uint256) {
        uint256 lpIndex = indexToken.balanceOf(address(pair));
        uint256 lpTotal = pair.totalSupply();
        if (lpTotal == 0) return 0;
        return lpIndex.mul(lpBalance).div(lpTotal);
    }


    /**
     * These functions are not used, but have been left in to keep the token ERC20 compliant
     */
    function name() public pure returns (string memory) { return "INDEXPOWAH"; }
    function symbol() public pure returns (string memory) { return "INDEXPOWAH"; }
    function decimals() public pure returns(uint8) { return 18; }
    function totalSupply() public view override returns (uint256) { return indexToken.totalSupply(); }
    function allowance(address, address) public view override returns (uint256) { return 0; }
    function transfer(address, uint256) public override returns (bool) { return false; }
    function approve(address, uint256) public override returns (bool) { return false; }
    function transferFrom(address, address, uint256) public override returns (bool) { return false; }
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;

interface IMasterChef {
    function userInfo(uint256 nr, address who) external view returns (uint256, uint256);
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;

interface IPair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity ^0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";


contract Vesting {
    using SafeMath for uint256;

    address public index;
    address public recipient;

    uint256 public vestingAmount;
    uint256 public vestingBegin;
    uint256 public vestingCliff;
    uint256 public vestingEnd;

    uint256 public lastUpdate;

    constructor(
        address index_,
        address recipient_,
        uint256 vestingAmount_,
        uint256 vestingBegin_,
        uint256 vestingCliff_,
        uint256 vestingEnd_
    ) public {
        require(vestingBegin_ >= block.timestamp, "TreasuryVester.constructor: vesting begin too early");
        require(vestingCliff_ >= vestingBegin_, "TreasuryVester.constructor: cliff is too early");
        require(vestingEnd_ > vestingCliff_, "TreasuryVester.constructor: end is too early");

        index = index_;
        recipient = recipient_;

        vestingAmount = vestingAmount_;
        vestingBegin = vestingBegin_;
        vestingCliff = vestingCliff_;
        vestingEnd = vestingEnd_;

        lastUpdate = vestingBegin;
    }

    function setRecipient(address recipient_) public {
        require(msg.sender == recipient, "TreasuryVester.setRecipient: unauthorized");
        recipient = recipient_;
    }

    function claim() public {
        require(block.timestamp >= vestingCliff, "TreasuryVester.claim: not time yet");
        uint256 amount;
        if (block.timestamp >= vestingEnd) {
            amount = IERC20(index).balanceOf(address(this));
        } else {
            amount = vestingAmount.mul(block.timestamp.sub(lastUpdate)).div(vestingEnd.sub(vestingBegin));
            lastUpdate = block.timestamp;
        }
        IERC20(index).transfer(recipient, amount);
    }
}

//SPDX-License-Identifier: Unlicense
pragma solidity ^0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

import { Vesting } from "./Vesting.sol";

/**
 * @title OtcEscrow
 * @author Badger DAO (Modified by Set Protocol)
 * 
 * A simple OTC swap contract allowing two users to set the parameters of an OTC
 * deal in the constructor arguments, and deposits the sold tokens into a vesting
 * contract when a swap is completed.
 */
contract OtcEscrow {

    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    /* ========== Events =========== */

    event VestingDeployed(address vesting);
    
    /* ====== Modifiers ======== */

    /**
     * Throws if the sender is not Index Gov
     */
    modifier onlyIndexGov() {
        require(msg.sender == indexGov, "unauthorized");
        _;
    }

    /**
     * Throws if run more than once
     */
    modifier onlyOnce() {
        require(!hasRun, "swap already executed");
        hasRun = true;
        _;
    }

    /* ======== State Variables ======= */

    address public usdc;
    address public index;

    address public indexGov;
    address public beneficiary;

    uint256 public vestingStart;
    uint256 public vestingEnd;
    uint256 public vestingCliff;

    uint256 public usdcAmount;
    uint256 public indexAmount;

    bool hasRun;



    /* ====== Constructor ======== */

    /**
     * Sets the state variables that encode the terms of the OTC sale
     *
     * @param _beneficiary  Address that will purchase INDEX
     * @param _indexGov     Address that will receive USDC
     * @param _vestingStart Timestamp of vesting start
     * @param _vestingCliff Timestamp of vesting cliff
     * @param _vestingEnd   Timestamp of vesting end
     * @param _usdcAmount   Amount of USDC swapped for the sale
     * @param _indexAmount  Amount of INDEX swapped for the sale
     * @param _usdcAddress  Address of the USDC token
     * @param _indexAddress Address of the Index token
     */
    constructor(
        address _beneficiary,
        address _indexGov,
        uint256 _vestingStart,
        uint256 _vestingCliff,
        uint256 _vestingEnd,
        uint256 _usdcAmount,
        uint256 _indexAmount,
        address _usdcAddress,
        address _indexAddress
    ) public {
        beneficiary = _beneficiary;
        indexGov =  _indexGov;

        vestingStart = _vestingStart;
        vestingCliff = _vestingCliff;
        vestingEnd = _vestingEnd;

        usdcAmount = _usdcAmount;
        indexAmount = _indexAmount;

        usdc = _usdcAddress;
        index = _indexAddress;
        hasRun = false;
    }
    
    /* ======= External Functions ======= */

    /**
     * Executes the OTC deal. Sends the USDC from the beneficiary to Index Governance, and
     * locks the INDEX in the vesting contract. Can only be called once.
     */
    function swap() external onlyOnce {

        require(IERC20(index).balanceOf(address(this)) >= indexAmount, "insufficient INDEX");

        // Transfer expected USDC from beneficiary
        IERC20(usdc).safeTransferFrom(beneficiary, address(this), usdcAmount);

        // Create Vesting contract
        Vesting vesting = new Vesting(index, beneficiary, indexAmount, vestingStart, vestingCliff, vestingEnd);

        // Transfer index to vesting contract
        IERC20(index).safeTransfer(address(vesting), indexAmount);

        // Transfer USDC to index governance
        IERC20(usdc).safeTransfer(indexGov, usdcAmount);

        emit VestingDeployed(address(vesting));
    }

    /**
     * Return INDEX to Index Governance to revoke the deal
     */
    function revoke() external onlyIndexGov {
        uint256 indexBalance = IERC20(index).balanceOf(address(this));
        IERC20(index).safeTransfer(indexGov, indexBalance);
    }

    /**
     * Recovers USDC accidentally sent to the contract
     */
    function recoverUsdc() external {
        uint256 usdcBalance = IERC20(usdc).balanceOf(address(this));
        IERC20(usdc).safeTransfer(beneficiary, usdcBalance);
    }
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity ^0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Math } from  "@openzeppelin/contracts/math/Math.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

// Inheritance
import { RewardsDistributionRecipient } from  "./RewardsDistributionRecipient.sol";

contract StakingRewards is RewardsDistributionRecipient, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    /* ========== STATE VARIABLES ========== */

    IERC20 public rewardsToken;
    IERC20 public stakingToken;
    uint256 public periodFinish = 0;
    uint256 public rewardRate = 0;
    uint256 public rewardsDuration = 60 days;
    uint256 public lastUpdateTime;
    uint256 public rewardPerTokenStored;

    mapping(address => uint256) public userRewardPerTokenPaid;
    mapping(address => uint256) public rewards;

    uint256 private _totalSupply;
    mapping(address => uint256) private _balances;

    /* ========== CONSTRUCTOR ========== */

    constructor(
        address _rewardsDistribution,
        address _rewardsToken,
        address _stakingToken
    ) public {
        rewardsToken = IERC20(_rewardsToken);
        stakingToken = IERC20(_stakingToken);
        rewardsDistribution = _rewardsDistribution;
    }

    /* ========== VIEWS ========== */

    function totalSupply() external view returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account) external view returns (uint256) {
        return _balances[account];
    }

    function lastTimeRewardApplicable() public view returns (uint256) {
        return Math.min(block.timestamp, periodFinish);
    }

    function rewardPerToken() public view returns (uint256) {
        if (_totalSupply == 0) {
            return rewardPerTokenStored;
        }
        return
            rewardPerTokenStored.add(
                lastTimeRewardApplicable().sub(lastUpdateTime).mul(rewardRate).mul(1e18).div(_totalSupply)
            );
    }

    function earned(address account) public view returns (uint256) {
        return _balances[account].mul(rewardPerToken().sub(userRewardPerTokenPaid[account])).div(1e18).add(rewards[account]);
    }

    function getRewardForDuration() external view returns (uint256) {
        return rewardRate.mul(rewardsDuration);
    }

    /* ========== MUTATIVE FUNCTIONS ========== */

    function stake(uint256 amount) external nonReentrant updateReward(msg.sender) {
        require(amount > 0, "Cannot stake 0");
        _totalSupply = _totalSupply.add(amount);
        _balances[msg.sender] = _balances[msg.sender].add(amount);
        stakingToken.safeTransferFrom(msg.sender, address(this), amount);
        emit Staked(msg.sender, amount);
    }

    function withdraw(uint256 amount) public nonReentrant updateReward(msg.sender) {
        require(amount > 0, "Cannot withdraw 0");
        _totalSupply = _totalSupply.sub(amount);
        _balances[msg.sender] = _balances[msg.sender].sub(amount);
        stakingToken.safeTransfer(msg.sender, amount);
        emit Withdrawn(msg.sender, amount);
    }

    function getReward() public nonReentrant updateReward(msg.sender) {
        uint256 reward = rewards[msg.sender];
        if (reward > 0) {
            rewards[msg.sender] = 0;
            rewardsToken.safeTransfer(msg.sender, reward);
            emit RewardPaid(msg.sender, reward);
        }
    }

    function exit() external {
        withdraw(_balances[msg.sender]);
        getReward();
    }

    /* ========== RESTRICTED FUNCTIONS ========== */

    function notifyRewardAmount(uint256 reward) external override onlyRewardsDistribution updateReward(address(0)) {
        if (block.timestamp >= periodFinish) {
            rewardRate = reward.div(rewardsDuration);
        } else {
            uint256 remaining = periodFinish.sub(block.timestamp);
            uint256 leftover = remaining.mul(rewardRate);
            rewardRate = reward.add(leftover).div(rewardsDuration);
        }

        // Ensure the provided reward amount is not more than the balance in the contract.
        // This keeps the reward rate in the right range, preventing overflows due to
        // very high values of rewardRate in the earned and rewardsPerToken functions;
        // Reward + leftover must be less than 2^256 / 10^18 to avoid overflow.
        uint balance = rewardsToken.balanceOf(address(this));
        require(rewardRate <= balance.div(rewardsDuration), "Provided reward too high");

        lastUpdateTime = block.timestamp;
        periodFinish = block.timestamp.add(rewardsDuration);
        emit RewardAdded(reward);
    }

    /* ========== MODIFIERS ========== */

    modifier updateReward(address account) {
        rewardPerTokenStored = rewardPerToken();
        lastUpdateTime = lastTimeRewardApplicable();
        if (account != address(0)) {
            rewards[account] = earned(account);
            userRewardPerTokenPaid[account] = rewardPerTokenStored;
        }
        _;
    }

    /* ========== EVENTS ========== */

    event RewardAdded(uint256 reward);
    event Staked(address indexed user, uint256 amount);
    event Withdrawn(address indexed user, uint256 amount);
    event RewardPaid(address indexed user, uint256 reward);
}

/*
    Copyright 2022 Index Cooperative
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Math } from "@openzeppelin/contracts/math/Math.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import { IBasicIssuanceModule } from "../interfaces/IBasicIssuanceModule.sol";
import { IDebtIssuanceModule } from "../interfaces/IDebtIssuanceModule.sol";
import { IController } from "../interfaces/IController.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { IWETH } from "../interfaces/IWETH.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";


contract ExchangeIssuanceZeroEx is Ownable, ReentrancyGuard {

    using Address for address payable;
    using SafeMath for uint256;
    using PreciseUnitMath for uint256;
    using SafeERC20 for IERC20;
    using SafeERC20 for ISetToken;

    struct IssuanceModuleData {
        bool isAllowed;
        bool isDebtIssuanceModule;
    }

    /* ============ Constants ============== */

    // Placeholder address to identify ETH where it is treated as if it was an ERC20 token
    address constant public ETH_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;

    /* ============ State Variables ============ */

    address public immutable WETH;
    IController public immutable setController;
    address public immutable swapTarget;

    /* ============ Events ============ */

    event ExchangeIssue(
        address indexed _recipient,     // The recipient address of the issued SetTokens
        ISetToken indexed _setToken,    // The issued SetToken
        IERC20 indexed _inputToken,     // The address of the input asset(ERC20/ETH) used to issue the SetTokens
        uint256 _amountInputToken,      // The amount of input tokens used for issuance
        uint256 _amountSetIssued        // The amount of SetTokens received by the recipient
    );

    event ExchangeRedeem(
        address indexed _recipient,     // The recipient adress of the output tokens obtained for redemption
        ISetToken indexed _setToken,    // The redeemed SetToken
        IERC20 indexed _outputToken,    // The address of output asset(ERC20/ETH) received by the recipient
        uint256 _amountSetRedeemed,     // The amount of SetTokens redeemed for output tokens
        uint256 _amountOutputToken      // The amount of output tokens received by the recipient
    );

    /* ============ Modifiers ============ */

    modifier isValidModule(address _issuanceModule) {
        require(setController.isModule(_issuanceModule), "ExchangeIssuance: INVALID ISSUANCE MODULE");
         _;
    }

    constructor(
        address _weth,
        IController _setController,
        address _swapTarget
    )
        public
    {
        setController = _setController;

        WETH = _weth;
        swapTarget = _swapTarget;
    }

    /* ============ External Functions ============ */

    /**
     * Withdraw slippage to selected address
     *
     * @param _tokens    Addresses of tokens to withdraw, specifiy ETH_ADDRESS to withdraw ETH
     * @param _to        Address to send the tokens to
     */
    function withdrawTokens(IERC20[] calldata _tokens, address payable _to) external onlyOwner payable {
        for(uint256 i = 0; i < _tokens.length; i++) {
            if(address(_tokens[i]) == ETH_ADDRESS){
                _to.sendValue(address(this).balance);
            }
            else{
                _tokens[i].safeTransfer(_to, _tokens[i].balanceOf(address(this)));
            }
        }
    }

    receive() external payable {
        // required for weth.withdraw() to work properly
        require(msg.sender == WETH, "ExchangeIssuance: Direct deposits not allowed");
    }

    /* ============ Public Functions ============ */


    /**
     * Runs all the necessary approval functions required for a given ERC20 token.
     * This function can be called when a new token is added to a SetToken during a
     * rebalance.
     *
     * @param _token    Address of the token which needs approval
     * @param _spender  Address of the spender which will be approved to spend token. (Must be a whitlisted issuance module)
     */
    function approveToken(IERC20 _token, address _spender) public  isValidModule(_spender) {
        _safeApprove(_token, _spender, type(uint256).max);
    }

    /**
     * Runs all the necessary approval functions required for a list of ERC20 tokens.
     *
     * @param _tokens    Addresses of the tokens which need approval
     * @param _spender   Address of the spender which will be approved to spend token. (Must be a whitlisted issuance module)
     */
    function approveTokens(IERC20[] calldata _tokens, address _spender) external {
        for (uint256 i = 0; i < _tokens.length; i++) {
            approveToken(_tokens[i], _spender);
        }
    }

    /**
     * Runs all the necessary approval functions required before issuing
     * or redeeming a SetToken. This function need to be called only once before the first time
     * this smart contract is used on any particular SetToken.
     *
     * @param _setToken          Address of the SetToken being initialized
     * @param _issuanceModule    Address of the issuance module which will be approved to spend component tokens.
     */
    function approveSetToken(ISetToken _setToken, address _issuanceModule) external {
        address[] memory components = _setToken.getComponents();
        for (uint256 i = 0; i < components.length; i++) {
            approveToken(IERC20(components[i]), _issuanceModule);
        }
    }

    /**
    * Issues an exact amount of SetTokens for given amount of input ERC20 tokens.
    * The excess amount of tokens is returned in an equivalent amount of ether.
    *
    * @param _setToken              Address of the SetToken to be issued
    * @param _inputToken            Address of the input token
    * @param _amountSetToken        Amount of SetTokens to issue
    * @param _maxAmountInputToken   Maximum amount of input tokens to be used to issue SetTokens.
    * @param _componentQuotes       The encoded 0x transactions to execute 
    *
    * @return totalInputTokenSold   Amount of input token spent for issuance
    */
    function issueExactSetFromToken(
        ISetToken _setToken,
        IERC20 _inputToken,
        uint256 _amountSetToken,
        uint256 _maxAmountInputToken,
        bytes[] memory _componentQuotes,
        address _issuanceModule,
        bool _isDebtIssuance
    )
        isValidModule(_issuanceModule)
        external
        nonReentrant
        returns (uint256)
    {

        _inputToken.safeTransferFrom(msg.sender, address(this), _maxAmountInputToken);
        _safeApprove(_inputToken, swapTarget, _maxAmountInputToken);

        uint256 totalInputTokenSold = _buyComponentsForInputToken(_setToken, _amountSetToken,  _componentQuotes, _inputToken, _issuanceModule, _isDebtIssuance);
        require(totalInputTokenSold <= _maxAmountInputToken, "ExchangeIssuance: OVERSPENT TOKEN");

        IBasicIssuanceModule(_issuanceModule).issue(_setToken, _amountSetToken, msg.sender);

        _returnExcessInputToken(_inputToken, _maxAmountInputToken, totalInputTokenSold);

        emit ExchangeIssue(msg.sender, _setToken, _inputToken, _maxAmountInputToken, _amountSetToken);
        return totalInputTokenSold;
    }


    /**
    * Issues an exact amount of SetTokens for given amount of ETH.
    * The excess amount of tokens is returned in an equivalent amount of ether.
    *
    * @param _setToken              Address of the SetToken to be issued
    * @param _amountSetToken        Amount of SetTokens to issue
    * @param _componentQuotes       The encoded 0x transactions to execute
    *
    * @return amountEthReturn       Amount of ether returned to the caller
    */
    function issueExactSetFromETH(
        ISetToken _setToken,
        uint256 _amountSetToken,
        bytes[] memory _componentQuotes,
        address _issuanceModule,
        bool _isDebtIssuance
    )
        isValidModule(_issuanceModule)
        external
        nonReentrant
        payable
        returns (uint256)
    {
        require(msg.value > 0, "ExchangeIssuance: NO ETH SENT");

        IWETH(WETH).deposit{value: msg.value}();
        _safeApprove(IERC20(WETH), swapTarget, msg.value);

        uint256 totalEthSold = _buyComponentsForInputToken(_setToken, _amountSetToken, _componentQuotes, IERC20(WETH), _issuanceModule, _isDebtIssuance);

        require(totalEthSold <= msg.value, "ExchangeIssuance: OVERSPENT ETH");
        IBasicIssuanceModule(_issuanceModule).issue(_setToken, _amountSetToken, msg.sender);

        uint256 amountEthReturn = msg.value.sub(totalEthSold);
        if (amountEthReturn > 0) {
            IWETH(WETH).withdraw(amountEthReturn);
            payable(msg.sender).sendValue(amountEthReturn);
        }

        emit ExchangeIssue(msg.sender, _setToken, IERC20(ETH_ADDRESS), totalEthSold, _amountSetToken);
        return amountEthReturn; 
    }

    /**
     * Redeems an exact amount of SetTokens for an ERC20 token.
     * The SetToken must be approved by the sender to this contract.
     *
     * @param _setToken             Address of the SetToken being redeemed
     * @param _outputToken          Address of output token
     * @param _amountSetToken       Amount SetTokens to redeem
     * @param _minOutputReceive     Minimum amount of output token to receive
     * @param _componentQuotes      The encoded 0x transactions execute (components -> WETH).
     * @param _issuanceModule       Address of issuance Module to use 
     * @param _isDebtIssuance       Flag indicating wether given issuance module is a debt issuance module
     *
     * @return outputAmount         Amount of output tokens sent to the caller
     */
    function redeemExactSetForToken(
        ISetToken _setToken,
        IERC20 _outputToken,
        uint256 _amountSetToken,
        uint256 _minOutputReceive,
        bytes[] memory _componentQuotes,
        address _issuanceModule,
        bool _isDebtIssuance
    )
        isValidModule(_issuanceModule)
        external
        nonReentrant
        returns (uint256)
    {

        uint256 outputAmount;
        _redeemExactSet(_setToken, _amountSetToken, _issuanceModule);

        outputAmount = _sellComponentsForOutputToken(_setToken, _amountSetToken, _componentQuotes, _outputToken, _issuanceModule, _isDebtIssuance);
        require(outputAmount >= _minOutputReceive, "ExchangeIssuance: INSUFFICIENT OUTPUT AMOUNT");

        // Transfer sender output token
        _outputToken.safeTransfer(msg.sender, outputAmount);
        // Emit event
        emit ExchangeRedeem(msg.sender, _setToken, _outputToken, _amountSetToken, outputAmount);
        // Return output amount
        return outputAmount;
    }

    /**
     * Redeems an exact amount of SetTokens for ETH.
     * The SetToken must be approved by the sender to this contract.
     *
     * @param _setToken             Address of the SetToken being redeemed
     * @param _amountSetToken       Amount SetTokens to redeem
     * @param _minEthReceive        Minimum amount of Eth to receive
     * @param _componentQuotes      The encoded 0x transactions execute
     * @param _issuanceModule       Address of issuance Module to use 
     * @param _isDebtIssuance       Flag indicating wether given issuance module is a debt issuance module
     *
     * @return outputAmount         Amount of output tokens sent to the caller
     */
    function redeemExactSetForETH(
        ISetToken _setToken,
        uint256 _amountSetToken,
        uint256 _minEthReceive,
        bytes[] memory _componentQuotes,
        address _issuanceModule,
        bool _isDebtIssuance
    )
        isValidModule(_issuanceModule)
        external
        nonReentrant
        returns (uint256)
    {
        _redeemExactSet(_setToken, _amountSetToken, _issuanceModule);
        uint ethAmount = _sellComponentsForOutputToken(_setToken, _amountSetToken, _componentQuotes, IERC20(WETH), _issuanceModule, _isDebtIssuance);
        require(ethAmount >= _minEthReceive, "ExchangeIssuance: INSUFFICIENT WETH RECEIVED");

        IWETH(WETH).withdraw(ethAmount);
        (payable(msg.sender)).sendValue(ethAmount);

        emit ExchangeRedeem(msg.sender, _setToken, IERC20(ETH_ADDRESS), _amountSetToken, ethAmount);
        return ethAmount;
         
    }
    

    /**
     * Sets a max approval limit for an ERC20 token, provided the current allowance
     * is less than the required allownce.
     *
     * @param _token    Token to approve
     * @param _spender  Spender address to approve
     */
    function _safeApprove(IERC20 _token, address _spender, uint256 _requiredAllowance) internal {
        uint256 allowance = _token.allowance(address(this), _spender);
        if (allowance < _requiredAllowance) {
            _token.safeIncreaseAllowance(_spender, type(uint256).max - allowance);
        }
    }

    /**
     * Issues an exact amount of SetTokens using WETH.
     * Acquires SetToken components by executing the 0x swaps whose callata is passed in _quotes.
     * Uses the acquired components to issue the SetTokens.
     *
     * @param _setToken             Address of the SetToken being issued
     * @param _amountSetToken       Amount of SetTokens to be issued
     * @param _quotes               The encoded 0x transaction calldata to execute against the 0x ExchangeProxy
     * @param _inputToken           Token to use to pay for issuance. Must be the sellToken of the 0x trades.
     * @param _issuanceModule       Issuance module to use for set token issuance.
     *
     * @return totalInputTokenSold  Total amount of input token spent on this issuance
     */
    function _buyComponentsForInputToken(
        ISetToken _setToken,
        uint256 _amountSetToken,
        bytes[] memory _quotes,
        IERC20 _inputToken,
        address _issuanceModule,
        bool _isDebtIssuance
    ) 
    internal
    returns (uint256 totalInputTokenSold)
    {
        uint256 componentAmountBought;

        (address[] memory components, uint256[] memory componentUnits) = getRequiredIssuanceComponents(_issuanceModule, _isDebtIssuance, _setToken, _amountSetToken);

        uint256 inputTokenBalanceBefore = _inputToken.balanceOf(address(this));
        for (uint256 i = 0; i < components.length; i++) {
            address component = components[i];
            uint256 units = componentUnits[i];

            // If the component is equal to the input token we don't have to trade
            if(component == address(_inputToken)) {
                totalInputTokenSold = totalInputTokenSold.add(units);
                componentAmountBought = units;
            }
            else {
                uint256 componentBalanceBefore = IERC20(component).balanceOf(address(this));
                _fillQuote(_quotes[i]);
                uint256 componentBalanceAfter = IERC20(component).balanceOf(address(this));
                componentAmountBought = componentBalanceAfter.sub(componentBalanceBefore);
                require(componentAmountBought >= units, "ExchangeIssuance: UNDERBOUGHT COMPONENT");
            }
        }
        uint256 inputTokenBalanceAfter = _inputToken.balanceOf(address(this));
        totalInputTokenSold = totalInputTokenSold.add(inputTokenBalanceBefore.sub(inputTokenBalanceAfter));
    }

    /**
     * Redeems a given list of SetToken components for given token.
     *
     * @param _setToken             The set token being swapped.
     * @param _amountSetToken       The amount of set token being swapped.
     * @param _swaps                An array containing ZeroExSwap swaps.
     * @param _outputToken          The token for which to sell the index components must be the same as the buyToken that was specified when generating the swaps
     * @param _issuanceModule    Address of issuance Module to use 
     * @param _isDebtIssuance    Flag indicating wether given issuance module is a debt issuance module
     *
     * @return totalOutputTokenBought  Total amount of output token received after liquidating all SetToken components
     */
    function _sellComponentsForOutputToken(ISetToken _setToken, uint256 _amountSetToken, bytes[] memory _swaps, IERC20 _outputToken, address _issuanceModule, bool _isDebtIssuance)
        internal
        returns (uint256 totalOutputTokenBought)
    {
        (address[] memory components, uint256[] memory componentUnits) = getRequiredRedemptionComponents(_issuanceModule, _isDebtIssuance, _setToken, _amountSetToken);
        uint256 outputTokenBalanceBefore = _outputToken.balanceOf(address(this));
        for (uint256 i = 0; i < _swaps.length; i++) {
            uint256 maxAmountSell = componentUnits[i];

            uint256 componentAmountSold;

            // If the component is equal to the output token we don't have to trade
            if(components[i] == address(_outputToken)) {
                totalOutputTokenBought = totalOutputTokenBought.add(maxAmountSell);
                componentAmountSold = maxAmountSell;
            }
            else {
                _safeApprove(IERC20(components[i]), address(swapTarget), maxAmountSell);
                uint256 componentBalanceBefore = IERC20(components[i]).balanceOf(address(this));
                _fillQuote(_swaps[i]);
                uint256 componentBalanceAfter = IERC20(components[i]).balanceOf(address(this));
                componentAmountSold = componentBalanceBefore.sub(componentBalanceAfter);
                require(maxAmountSell >= componentAmountSold, "ExchangeIssuance: OVERSOLD COMPONENT");
            }

        }
        uint256 outputTokenBalanceAfter = _outputToken.balanceOf(address(this));
        totalOutputTokenBought = totalOutputTokenBought.add(outputTokenBalanceAfter.sub(outputTokenBalanceBefore));
    }

    /**
     * Execute a 0x Swap quote
     *
     * @param _quote          Swap quote as returned by 0x API
     *
     */
    function _fillQuote(
        bytes memory _quote
    )
        internal
        
    {

        (bool success, bytes memory returndata) = swapTarget.call(_quote);

        // Forwarding errors including new custom errors
        // Taken from: https://ethereum.stackexchange.com/a/111187/73805
        if (!success) {
            if (returndata.length == 0) revert();
            assembly {
                revert(add(32, returndata), mload(returndata))
            }
        }

    }

    /**
     * Transfers given amount of set token from the sender and redeems it for underlying components.
     * Obtained component tokens are sent to this contract. 
     *
     * @param _setToken     Address of the SetToken to be redeemed
     * @param _amount       Amount of SetToken to be redeemed
     */
    function _redeemExactSet(ISetToken _setToken, uint256 _amount, address _issuanceModule) internal returns (uint256) {
        _setToken.safeTransferFrom(msg.sender, address(this), _amount);
        IBasicIssuanceModule(_issuanceModule).redeem(_setToken, _amount, address(this));
    }

    /**
     * Returns excess input token
     *
     * @param _inputToken         Address of the input token to return
     * @param _receivedAmount     Amount received by the caller
     * @param _spentAmount        Amount spent for issuance
     */
    function _returnExcessInputToken(IERC20 _inputToken, uint256 _receivedAmount, uint256 _spentAmount) internal {
        uint256 amountTokenReturn = _receivedAmount.sub(_spentAmount);
        if (amountTokenReturn > 0) {
            _inputToken.safeTransfer(msg.sender,  amountTokenReturn);
        }
    }

    /**
     * Returns component positions required for issuance 
     *
     * @param _issuanceModule    Address of issuance Module to use 
     * @param _isDebtIssuance    Flag indicating wether given issuance module is a debt issuance module
     * @param _setToken          Set token to issue
     * @param _amountSetToken    Amount of set token to issue
     */
    function getRequiredIssuanceComponents(address _issuanceModule, bool _isDebtIssuance, ISetToken _setToken, uint256 _amountSetToken) public view returns(address[] memory components, uint256[] memory positions) {
        if(_isDebtIssuance) { 
            (components, positions, ) = IDebtIssuanceModule(_issuanceModule).getRequiredComponentIssuanceUnits(_setToken, _amountSetToken);
        }
        else {
            (components, positions) = IBasicIssuanceModule(_issuanceModule).getRequiredComponentUnitsForIssue(_setToken, _amountSetToken);
        }

    }

    /**
     * Returns component positions required for Redemption 
     *
     * @param _issuanceModule    Address of issuance Module to use 
     * @param _isDebtIssuance    Flag indicating wether given issuance module is a debt issuance module
     * @param _setToken          Set token to issue
     * @param _amountSetToken    Amount of set token to issue
     */
    function getRequiredRedemptionComponents(address _issuanceModule, bool _isDebtIssuance, ISetToken _setToken, uint256 _amountSetToken) public view returns(address[] memory components, uint256[] memory positions) {
        if(_isDebtIssuance) { 
            (components, positions, ) = IDebtIssuanceModule(_issuanceModule).getRequiredComponentRedemptionUnits(_setToken, _amountSetToken);
        }
        else {
            components = _setToken.getComponents();
            positions = new uint256[](components.length);
            for(uint256 i = 0; i < components.length; i++) {
                uint256 unit = uint256(_setToken.getDefaultPositionRealUnit(components[i]));
                positions[i] = unit.preciseMul(_amountSetToken);
            }
        }
    }
}

/*
    Copyright 2020 Set Labs Inc.
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity >=0.6.10;

import { ISetToken } from "./ISetToken.sol";

interface IBasicIssuanceModule {
    function getRequiredComponentUnitsForIssue(
        ISetToken _setToken,
        uint256 _quantity
    ) external view returns(address[] memory, uint256[] memory);
    function issue(ISetToken _setToken, uint256 _quantity, address _to) external;
    function redeem(ISetToken _token, uint256 _quantity, address _to) external;
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

import { FlexibleLeverageStrategyExtension } from "../adapters/FlexibleLeverageStrategyExtension.sol";
import { IFLIStrategyExtension } from "../interfaces/IFLIStrategyExtension.sol";
import { IQuoter } from "../interfaces/IQuoter.sol";
import { IUniswapV2Router } from "../interfaces/IUniswapV2Router.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { StringArrayUtils } from "../lib/StringArrayUtils.sol";


/**
 * @title FLIRebalanceViewer
 * @author Set Protocol
 *
 * Viewer contract for FlexibleLeverageStrategyExtension. Used by keeper bots to determine which exchanges to use when rebalancing.
 * This contract can only determine whether to use Uniswap V3 or Uniswap V2 (or forks) for rebalancing. Since AMMTradeSplitter adheres to
 * the Uniswap V2 router interface, this contract is compatible with that as well.
 */
contract FLIRebalanceViewer {

    using PreciseUnitMath  for uint256;
    using SafeMath for uint256;
    using StringArrayUtils for string[];

    /* ============ Structs ============ */

    struct ActionInfo {
        string[] exchangeNames;                                                     // List of enabled exchange names
        FlexibleLeverageStrategyExtension.ShouldRebalance[] rebalanceActions;       // List of rebalance actions with respect to exchangeNames
        uint256 uniV3Index;                                                         // Index of Uni V3 in both lists
        uint256 uniV2Index;                                                         // Index of Uni V2 in both lists
        uint256 minLeverage;                                                        // Minimum leverage ratio of strategy
        uint256 maxLeverage;                                                        // Maximum leverage ratio of strategy
        uint256[] chunkSendQuantity;                                                // Size of rebalances (quoted in sell asset units)
        address sellAsset;                                                          // Address of asset to sell during rebalance
        address buyAsset;                                                           // Address of asset to buy during rebalance
        bool isLever;                                                               // Whether the rebalance is a lever or delever
    }

    /* ============ State Variables ============ */

    IFLIStrategyExtension public fliStrategyExtension;

    IQuoter public uniswapV3Quoter;
    IUniswapV2Router public uniswapV2Router;

    string public uniswapV3ExchangeName;
    string public uniswapV2ExchangeName;

    /* ============ Constructor ============ */

    /**
     * Sets state variables
     *
     * @param _fliStrategyExtension     FlexibleLeverageStrategyAdapter contract address
     * @param _uniswapV3Quoter          Uniswap V3 Quoter contract address
     * @param _uniswapV2Router          Uniswap v2 Router contract address
     * @param _uniswapV3ExchangeName    Name of Uniswap V3 exchange in Set's IntegrationRegistry (ex: UniswapV3ExchangeAdapter)
     * @param _uniswapV2ExchangeName    Name of Uniswap V2 exchange in Set's IntegrationRegistry (ex: AMMSplitterExchangeAdapter)
     */
    constructor(
        IFLIStrategyExtension _fliStrategyExtension,
        IQuoter _uniswapV3Quoter,
        IUniswapV2Router _uniswapV2Router,
        string memory _uniswapV3ExchangeName,
        string memory _uniswapV2ExchangeName
    )
        public
    {
        fliStrategyExtension = _fliStrategyExtension;
        uniswapV3Quoter = _uniswapV3Quoter;
        uniswapV2Router = _uniswapV2Router;
        uniswapV3ExchangeName = _uniswapV3ExchangeName;
        uniswapV2ExchangeName = _uniswapV2ExchangeName;
    }

    /* =========== External Functions ============ */

    /**
     * Gets the priority order for which exchange should be used while rebalancing. Mimics the interface for
     * shouldRebalanceWithBound of FlexibleLeverageStrategyExtension. Note: this function is not marked as view
     * due to a quirk in the Uniswap V3 Quoter contract, but should be static called to save gas
     *
     * @param _minLeverageRatio       Min leverage ratio
     * @param _maxLeverageRatio       Max leverage ratio
     *
     * @return string[] memory              Ordered array of exchange names to use. Earlier elements in the array produce the best trades
     * @return ShouldRebalance[] memory     Array of ShouldRebalance Enums. Ordered relative to returned exchange names array
     */
    function shouldRebalanceWithBounds(
        uint256 _minLeverageRatio,
        uint256 _maxLeverageRatio
    )
        external
        returns(string[2] memory, FlexibleLeverageStrategyExtension.ShouldRebalance[2] memory)
    {

        ActionInfo memory actionInfo = _getActionInfo(_minLeverageRatio, _maxLeverageRatio);

        (uint256 uniswapV3Price, uint256 uniswapV2Price) = _getPrices(actionInfo);

        return _getExchangePriority(
            uniswapV3Price,
            uniswapV2Price,
            actionInfo
        );
    }

    /* ================= Internal Functions ================= */

    /**
     * Fetches prices for rebalancing trades on Uniswap V3 and Uniswap V2. Trade sizes are determined by FlexibleLeverageStrategyExtension's
     * getChunkRebalanceNotional.
     *
     * @param _actionInfo    ActionInfo struct
     *
     * @return uniswapV3Price   price of rebalancing trade on Uniswap V3 (scaled by trade size)
     * @return uniswapV2Price   price of rebalancing trade on Uniswap V2 (scaled by trade size)
     */
    function _getPrices(ActionInfo memory _actionInfo) internal returns (uint256 uniswapV3Price, uint256 uniswapV2Price) {
        uniswapV3Price = _getV3Price(_actionInfo.chunkSendQuantity[_actionInfo.uniV3Index], _actionInfo.isLever);
        uniswapV2Price = _getV2Price(
            _actionInfo.chunkSendQuantity[_actionInfo.uniV2Index],
            _actionInfo.isLever, _actionInfo.sellAsset, _actionInfo.buyAsset
        );
    }

    /**
     * Fetches price of a Uniswap V3 trade. Uniswap V3 fetches quotes using a write function that always reverts. This means that
     * this function cannot be view only. Additionally, the Uniswap V3 quoting function cannot be static called in solidity due to the
     * internal revert. To save on gas, static call the top level shouldRebalanceWithBounds function when interacting with this contact
     *
     * @param _sellSize     quantity of asset to sell
     * @param _isLever      whether FLI needs to lever or delever
     *
     * @return uint256      price of trade on Uniswap V3
     */
    function _getV3Price(uint256 _sellSize, bool _isLever) internal returns (uint256) {

        bytes memory uniswapV3TradePath = _isLever ?
            fliStrategyExtension.getExchangeSettings(uniswapV3ExchangeName).leverExchangeData :
            fliStrategyExtension.getExchangeSettings(uniswapV3ExchangeName).deleverExchangeData;

        uint256 outputAmount = uniswapV3Quoter.quoteExactInput(uniswapV3TradePath, _sellSize);

        // Divide to get ratio of quote / base asset. Don't care about decimals here. Standardizes to 10e18 with preciseDiv
        return outputAmount.preciseDiv(_sellSize);
    }

    /**
     * Fetches price of a Uniswap V2 trade
     *
     * @param _sellSize     quantity of asset to sell
     * @param _isLever      whether FLI needs to lever or delever
     *
     * @return uint256      price of trade on Uniswap V2
     */
    function _getV2Price(uint256 _sellSize, bool _isLever, address _sellAsset, address _buyAsset) internal view returns (uint256) {

        bytes memory uniswapV2TradePathRaw = _isLever ?
            fliStrategyExtension.getExchangeSettings(uniswapV2ExchangeName).leverExchangeData :
            fliStrategyExtension.getExchangeSettings(uniswapV2ExchangeName).deleverExchangeData;

        address[] memory uniswapV2TradePath;
        if (uniswapV2TradePathRaw.length == 0) {
            uniswapV2TradePath = new address[](2);
            uniswapV2TradePath[0] = _sellAsset;
            uniswapV2TradePath[1] = _buyAsset;
        } else {
            uniswapV2TradePath = abi.decode(uniswapV2TradePathRaw, (address[]));
        }

        uint256 outputAmount = uniswapV2Router.getAmountsOut(_sellSize, uniswapV2TradePath)[uniswapV2TradePath.length.sub(1)];

        // Divide to get ratio of quote / base asset. Don't care about decimals here. Standardizes to 10e18 with preciseDiv
        return outputAmount.preciseDiv(_sellSize);
    }

    /**
     * Gets the ordered priority of which exchanges to use for a rebalance
     *
     * @param _uniswapV3Price               price of rebalance trade on Uniswap V3
     * @param _uniswapV2Price               price of rebalance trade on Uniswap V2
     * @param _actionInfo                   ActionInfo struct
     *
     * @return string[] memory              Ordered array of exchange names to use. Earlier elements in the array produce the best trades
     * @return ShouldRebalance[] memory     Array of ShouldRebalance Enums. Ordered relative to returned exchange names array
     */
    function _getExchangePriority(
        uint256 _uniswapV3Price,
        uint256 _uniswapV2Price,
        ActionInfo memory _actionInfo
    )
        internal
        view
        returns (string[2] memory, FlexibleLeverageStrategyExtension.ShouldRebalance[2] memory)
    {

        // If no rebalance is required, set price to 0 so it is ordered last
        if (_actionInfo.rebalanceActions[_actionInfo.uniV3Index] == FlexibleLeverageStrategyExtension.ShouldRebalance.NONE) _uniswapV3Price = 0;
        if (_actionInfo.rebalanceActions[_actionInfo.uniV2Index] == FlexibleLeverageStrategyExtension.ShouldRebalance.NONE) _uniswapV2Price = 0;

        if (_uniswapV3Price > _uniswapV2Price) {
            return ([ uniswapV3ExchangeName, uniswapV2ExchangeName ],
                    [ _actionInfo.rebalanceActions[_actionInfo.uniV3Index], _actionInfo.rebalanceActions[_actionInfo.uniV2Index] ]);
        } else {
            return ([ uniswapV2ExchangeName, uniswapV3ExchangeName ],
                    [ _actionInfo.rebalanceActions[_actionInfo.uniV2Index], _actionInfo.rebalanceActions[_actionInfo.uniV3Index] ]);
        }
    }

    /**
     * Creates the an ActionInfo struct containing information about the rebalancing action
     *
     * @param _minLeverage          Min leverage ratio
     * @param _maxLeverage          Max leverage ratio
     *
     * @return actionInfo           Populated ActionInfo struct
     */
    function _getActionInfo(uint256 _minLeverage, uint256 _maxLeverage) internal view returns (ActionInfo memory actionInfo) {

        (actionInfo.exchangeNames, actionInfo.rebalanceActions) = fliStrategyExtension.shouldRebalanceWithBounds(
            _minLeverage,
            _maxLeverage
        );

        (actionInfo.uniV3Index, ) = actionInfo.exchangeNames.indexOf(uniswapV3ExchangeName);
        (actionInfo.uniV2Index, ) = actionInfo.exchangeNames.indexOf(uniswapV2ExchangeName);

        actionInfo.minLeverage = _minLeverage;
        actionInfo.maxLeverage = _maxLeverage;

        (actionInfo.chunkSendQuantity, actionInfo.sellAsset, actionInfo.buyAsset) = fliStrategyExtension.getChunkRebalanceNotional(
            actionInfo.exchangeNames
        );

        actionInfo.isLever = actionInfo.sellAsset == fliStrategyExtension.getStrategy().borrowAsset;
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { ERC20 } from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import { Math } from "@openzeppelin/contracts/math/Math.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { SafeCast } from "@openzeppelin/contracts/utils/SafeCast.sol";

import { BaseExtension } from "../lib/BaseExtension.sol";
import { ICErc20 } from "../interfaces/ICErc20.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";
import { IChainlinkAggregatorV3 } from "../interfaces/IChainlinkAggregatorV3.sol";
import { IComptroller } from "../interfaces/IComptroller.sol";
import { ILeverageModule } from "../interfaces/ILeverageModule.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { StringArrayUtils } from "../lib/StringArrayUtils.sol";


/**
 * @title FlexibleLeverageStrategyExtension
 * @author Set Protocol
 *
 * Smart contract that enables trustless leverage tokens using the flexible leverage methodology. This extension is paired with the CompoundLeverageModule from Set
 * protocol where module interactions are invoked via the IBaseManager contract. Any leveraged token can be constructed as long as the collateral and borrow
 * asset is available on Compound. This extension contract also allows the operator to set an ETH reward to incentivize keepers calling the rebalance function at
 * different leverage thresholds.
 *
 * CHANGELOG 4/14/2021:
 * - Update ExecutionSettings struct to split exchangeData into leverExchangeData and deleverExchangeData
 * - Update _lever and _delever internal functions with struct changes
 * - Update setExecutionSettings to account for leverExchangeData and deleverExchangeData
 *
 * CHANGELOG 5/24/2021:
 * - Update _calculateActionInfo to add chainlink prices
 * - Update _calculateBorrowUnits and _calculateMinRepayUnits to use chainlink as an oracle in
 *
 * CHANGELOG 6/29/2021: c55bd3cdb0fd43c03da9904493dcc23771ef0f71
 * - Add ExchangeSettings struct that contains exchange specific information
 * - Update ExecutionSettings struct to not include exchange information
 * - Add mapping of exchange names to ExchangeSettings structs and a list of enabled exchange names
 * - Update constructor to take an array of exchange names and an array of ExchangeSettings
 * - Add _exchangeName parameter to rebalancing functions to select which exchange to use
 * - Add permissioned addEnabledExchange, updateEnabledExchange, and removeEnabledExchange functions
 * - Add getChunkRebalanceNotional function
 * - Update shouldRebalance and shouldRebalanceWithBounds to return an array of ShouldRebalance enums and an array of exchange names
 * - Update _shouldRebalance to use exchange specific last trade timestamps
 * - Update _validateRipcord and _validateNormalRebalance to take in a timestamp parameter (so we can pass either global or exchange specific timestamp)
 * - Add _updateLastTradeTimestamp function to update global and exchange specific timestamp
 * - Change contract name to FlexibleLeverageStrategyExtension
 */
contract FlexibleLeverageStrategyExtension is BaseExtension {
    using Address for address;
    using PreciseUnitMath for uint256;
    using SafeMath for uint256;
    using SafeCast for int256;
    using StringArrayUtils for string[];

    /* ============ Enums ============ */

    enum ShouldRebalance {
        NONE,                   // Indicates no rebalance action can be taken
        REBALANCE,              // Indicates rebalance() function can be successfully called
        ITERATE_REBALANCE,      // Indicates iterateRebalance() function can be successfully called
        RIPCORD                 // Indicates ripcord() function can be successfully called
    }

    /* ============ Structs ============ */

    struct ActionInfo {
        uint256 collateralBalance;                      // Balance of underlying held in Compound in base units (e.g. USDC 10e6)
        uint256 borrowBalance;                          // Balance of underlying borrowed from Compound in base units
        uint256 collateralValue;                        // Valuation in USD adjusted for decimals in precise units (10e18)
        uint256 borrowValue;                            // Valuation in USD adjusted for decimals in precise units (10e18)
        uint256 collateralPrice;                        // Price of collateral in precise units (10e18) from Chainlink
        uint256 borrowPrice;                            // Price of borrow asset in precise units (10e18) from Chainlink
        uint256 setTotalSupply;                         // Total supply of SetToken
    }

     struct LeverageInfo {
        ActionInfo action;
        uint256 currentLeverageRatio;                   // Current leverage ratio of Set
        uint256 slippageTolerance;                      // Allowable percent trade slippage in preciseUnits (1% = 10^16)
        uint256 twapMaxTradeSize;                       // Max trade size in collateral units allowed for rebalance action
        string exchangeName;                            // Exchange to use for trade
    }

    struct ContractSettings {
        ISetToken setToken;                             // Instance of leverage token
        ILeverageModule leverageModule;                 // Instance of Compound leverage module
        IComptroller comptroller;                       // Instance of Compound Comptroller
        IChainlinkAggregatorV3 collateralPriceOracle;   // Chainlink oracle feed that returns prices in 8 decimals for collateral asset
        IChainlinkAggregatorV3 borrowPriceOracle;       // Chainlink oracle feed that returns prices in 8 decimals for borrow asset
        ICErc20 targetCollateralCToken;                 // Instance of target collateral cToken asset
        ICErc20 targetBorrowCToken;                     // Instance of target borrow cToken asset
        address collateralAsset;                        // Address of underlying collateral
        address borrowAsset;                            // Address of underlying borrow asset
        uint256 collateralDecimalAdjustment;            // Decimal adjustment for chainlink oracle of the collateral asset. Equal to 28-collateralDecimals (10^18 * 10^18 / 10^decimals / 10^8)
        uint256 borrowDecimalAdjustment;                // Decimal adjustment for chainlink oracle of the borrowing asset. Equal to 28-borrowDecimals (10^18 * 10^18 / 10^decimals / 10^8)
    }

    struct MethodologySettings {
        uint256 targetLeverageRatio;                     // Long term target ratio in precise units (10e18)
        uint256 minLeverageRatio;                        // In precise units (10e18). If current leverage is below, rebalance target is this ratio
        uint256 maxLeverageRatio;                        // In precise units (10e18). If current leverage is above, rebalance target is this ratio
        uint256 recenteringSpeed;                        // % at which to rebalance back to target leverage in precise units (10e18)
        uint256 rebalanceInterval;                       // Period of time required since last rebalance timestamp in seconds
    }

    struct ExecutionSettings {
        uint256 unutilizedLeveragePercentage;            // Percent of max borrow left unutilized in precise units (1% = 10e16)
        uint256 slippageTolerance;                       // % in precise units to price min token receive amount from trade quantities
        uint256 twapCooldownPeriod;                      // Cooldown period required since last trade timestamp in seconds
    }

    struct ExchangeSettings {
        uint256 twapMaxTradeSize;                        // Max trade size in collateral base units
        uint256 exchangeLastTradeTimestamp;              // Timestamp of last trade made with this exchange
        uint256 incentivizedTwapMaxTradeSize;            // Max trade size for incentivized rebalances in collateral base units
        bytes leverExchangeData;                         // Arbitrary exchange data passed into rebalance function for levering up
        bytes deleverExchangeData;                       // Arbitrary exchange data passed into rebalance function for delevering
    }

    struct IncentiveSettings {
        uint256 etherReward;                             // ETH reward for incentivized rebalances
        uint256 incentivizedLeverageRatio;               // Leverage ratio for incentivized rebalances
        uint256 incentivizedSlippageTolerance;           // Slippage tolerance percentage for incentivized rebalances
        uint256 incentivizedTwapCooldownPeriod;          // TWAP cooldown in seconds for incentivized rebalances
    }

    /* ============ Events ============ */

    event Engaged(uint256 _currentLeverageRatio, uint256 _newLeverageRatio, uint256 _chunkRebalanceNotional, uint256 _totalRebalanceNotional);
    event Rebalanced(
        uint256 _currentLeverageRatio,
        uint256 _newLeverageRatio,
        uint256 _chunkRebalanceNotional,
        uint256 _totalRebalanceNotional
    );
    event RebalanceIterated(
        uint256 _currentLeverageRatio,
        uint256 _newLeverageRatio,
        uint256 _chunkRebalanceNotional,
        uint256 _totalRebalanceNotional
    );
    event RipcordCalled(
        uint256 _currentLeverageRatio,
        uint256 _newLeverageRatio,
        uint256 _rebalanceNotional,
        uint256 _etherIncentive
    );
    event Disengaged(uint256 _currentLeverageRatio, uint256 _newLeverageRatio, uint256 _chunkRebalanceNotional, uint256 _totalRebalanceNotional);
    event MethodologySettingsUpdated(
        uint256 _targetLeverageRatio,
        uint256 _minLeverageRatio,
        uint256 _maxLeverageRatio,
        uint256 _recenteringSpeed,
        uint256 _rebalanceInterval
    );
    event ExecutionSettingsUpdated(
        uint256 _unutilizedLeveragePercentage,
        uint256 _twapCooldownPeriod,
        uint256 _slippageTolerance
    );
    event IncentiveSettingsUpdated(
        uint256 _etherReward,
        uint256 _incentivizedLeverageRatio,
        uint256 _incentivizedSlippageTolerance,
        uint256 _incentivizedTwapCooldownPeriod
    );
    event ExchangeUpdated(
        string _exchangeName,
        uint256 twapMaxTradeSize,
        uint256 exchangeLastTradeTimestamp,
        uint256 incentivizedTwapMaxTradeSize,
        bytes leverExchangeData,
        bytes deleverExchangeData
    );
    event ExchangeAdded(
        string _exchangeName,
        uint256 twapMaxTradeSize,
        uint256 exchangeLastTradeTimestamp,
        uint256 incentivizedTwapMaxTradeSize,
        bytes leverExchangeData,
        bytes deleverExchangeData
    );
    event ExchangeRemoved(
        string _exchangeName
    );

    /* ============ Modifiers ============ */

    /**
     * Throws if rebalance is currently in TWAP`
     */
    modifier noRebalanceInProgress() {
        require(twapLeverageRatio == 0, "Rebalance is currently in progress");
        _;
    }

    /* ============ State Variables ============ */

    ContractSettings internal strategy;                             // Struct of contracts used in the strategy (SetToken, price oracles, leverage module etc)
    MethodologySettings internal methodology;                       // Struct containing methodology parameters
    ExecutionSettings internal execution;                           // Struct containing execution parameters
    mapping(string => ExchangeSettings) internal exchangeSettings;  // Mapping from exchange name to exchange settings
    IncentiveSettings internal incentive;                           // Struct containing incentive parameters for ripcord
    string[] public enabledExchanges;                               // Array containing enabled exchanges
    uint256 public twapLeverageRatio;                               // Stored leverage ratio to keep track of target between TWAP rebalances
    uint256 public globalLastTradeTimestamp;                        // Last rebalance timestamp. Current timestamp must be greater than this variable + rebalance interval to rebalance

    /* ============ Constructor ============ */

    /**
     * Instantiate addresses, methodology parameters, execution parameters, and incentive parameters.
     *
     * @param _manager                  Address of IBaseManager contract
     * @param _strategy                 Struct of contract addresses
     * @param _methodology              Struct containing methodology parameters
     * @param _execution                Struct containing execution parameters
     * @param _incentive                Struct containing incentive parameters for ripcord
     * @param _exchangeNames            List of initial exchange names
     * @param _exchangeSettings         List of structs containing exchange parameters for the initial exchanges
     */
    constructor(
        IBaseManager _manager,
        ContractSettings memory _strategy,
        MethodologySettings memory _methodology,
        ExecutionSettings memory _execution,
        IncentiveSettings memory _incentive,
        string[] memory _exchangeNames,
        ExchangeSettings[] memory _exchangeSettings
    )
        public
        BaseExtension(_manager)
    {
        strategy = _strategy;
        methodology = _methodology;
        execution = _execution;
        incentive = _incentive;

        for (uint256 i = 0; i < _exchangeNames.length; i++) {
            _validateExchangeSettings(_exchangeSettings[i]);
            exchangeSettings[_exchangeNames[i]] = _exchangeSettings[i];
            enabledExchanges.push(_exchangeNames[i]);
        }

        _validateNonExchangeSettings(methodology, execution, incentive);
    }

    /* ============ External Functions ============ */

    /**
     * OPERATOR ONLY: Engage to target leverage ratio for the first time. SetToken will borrow debt position from Compound and trade for collateral asset. If target
     * leverage ratio is above max borrow or max trade size, then TWAP is kicked off. To complete engage if TWAP, any valid caller must call iterateRebalance until target
     * is met.
     *
     * @param _exchangeName     the exchange used for trading
     */
    function engage(string memory _exchangeName) external onlyOperator {
        ActionInfo memory engageInfo = _createActionInfo();

        require(engageInfo.setTotalSupply > 0, "SetToken must have > 0 supply");
        require(engageInfo.collateralBalance > 0, "Collateral balance must be > 0");
        require(engageInfo.borrowBalance == 0, "Debt must be 0");

        LeverageInfo memory leverageInfo = LeverageInfo({
            action: engageInfo,
            currentLeverageRatio: PreciseUnitMath.preciseUnit(), // 1x leverage in precise units
            slippageTolerance: execution.slippageTolerance,
            twapMaxTradeSize: exchangeSettings[_exchangeName].twapMaxTradeSize,
            exchangeName: _exchangeName
        });

        // Calculate total rebalance units and kick off TWAP if above max borrow or max trade size
        (
            uint256 chunkRebalanceNotional,
            uint256 totalRebalanceNotional
        ) = _calculateChunkRebalanceNotional(leverageInfo, methodology.targetLeverageRatio, true);

        _lever(leverageInfo, chunkRebalanceNotional);

        _updateRebalanceState(
            chunkRebalanceNotional,
            totalRebalanceNotional,
            methodology.targetLeverageRatio,
            _exchangeName
        );

        emit Engaged(
            leverageInfo.currentLeverageRatio,
            methodology.targetLeverageRatio,
            chunkRebalanceNotional,
            totalRebalanceNotional
        );
    }

    /**
     * ONLY EOA AND ALLOWED CALLER: Rebalance according to flexible leverage methodology. If current leverage ratio is between the max and min bounds, then rebalance
     * can only be called once the rebalance interval has elapsed since last timestamp. If outside the max and min, rebalance can be called anytime to bring leverage
     * ratio back to the max or min bounds. The methodology will determine whether to delever or lever.
     *
     * Note: If the calculated current leverage ratio is above the incentivized leverage ratio or in TWAP then rebalance cannot be called. Instead, you must call
     * ripcord() which is incentivized with a reward in Ether or iterateRebalance().
     *
     * @param _exchangeName     the exchange used for trading
     */
     function rebalance(string memory _exchangeName) external onlyEOA onlyAllowedCaller(msg.sender) {
        LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
            execution.slippageTolerance,
            exchangeSettings[_exchangeName].twapMaxTradeSize,
            _exchangeName
        );

        // use globalLastTradeTimestamps to prevent multiple rebalances being called with different exchanges during the epoch rebalance
        _validateNormalRebalance(leverageInfo, methodology.rebalanceInterval, globalLastTradeTimestamp);
        _validateNonTWAP();

        uint256 newLeverageRatio = _calculateNewLeverageRatio(leverageInfo.currentLeverageRatio);

        (
            uint256 chunkRebalanceNotional,
            uint256 totalRebalanceNotional
        ) = _handleRebalance(leverageInfo, newLeverageRatio);

        _updateRebalanceState(chunkRebalanceNotional, totalRebalanceNotional, newLeverageRatio, _exchangeName);

        emit Rebalanced(
            leverageInfo.currentLeverageRatio,
            newLeverageRatio,
            chunkRebalanceNotional,
            totalRebalanceNotional
        );
    }

    /**
     * ONLY EOA AND ALLOWED CALLER: Iterate a rebalance when in TWAP. TWAP cooldown period must have elapsed. If price moves advantageously, then exit without rebalancing
     * and clear TWAP state. This function can only be called when below incentivized leverage ratio and in TWAP state.
     *
     * @param _exchangeName     the exchange used for trading
     */
    function iterateRebalance(string memory _exchangeName) external onlyEOA onlyAllowedCaller(msg.sender) {
        LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
            execution.slippageTolerance,
            exchangeSettings[_exchangeName].twapMaxTradeSize,
            _exchangeName
        );

        // Use the exchangeLastTradeTimestamp since cooldown periods are measured on a per-exchange basis, allowing it to rebalance multiple time in quick
        // succession with different exchanges
        _validateNormalRebalance(leverageInfo, execution.twapCooldownPeriod, exchangeSettings[_exchangeName].exchangeLastTradeTimestamp);
        _validateTWAP();

        uint256 chunkRebalanceNotional;
        uint256 totalRebalanceNotional;
        if (!_isAdvantageousTWAP(leverageInfo.currentLeverageRatio)) {
            (chunkRebalanceNotional, totalRebalanceNotional) = _handleRebalance(leverageInfo, twapLeverageRatio);
        }

        // If not advantageous, then rebalance is skipped and chunk and total rebalance notional are both 0, which means TWAP state is
        // cleared
        _updateIterateState(chunkRebalanceNotional, totalRebalanceNotional, _exchangeName);

        emit RebalanceIterated(
            leverageInfo.currentLeverageRatio,
            twapLeverageRatio,
            chunkRebalanceNotional,
            totalRebalanceNotional
        );
    }

    /**
     * ONLY EOA: In case the current leverage ratio exceeds the incentivized leverage threshold, the ripcord function can be called by anyone to return leverage ratio
     * back to the max leverage ratio. This function typically would only be called during times of high downside volatility and / or normal keeper malfunctions. The caller
     * of ripcord() will receive a reward in Ether. The ripcord function uses it's own TWAP cooldown period, slippage tolerance and TWAP max trade size which are typically
     * looser than in regular rebalances.
     *
     * @param _exchangeName     the exchange used for trading
     */
    function ripcord(string memory _exchangeName) external onlyEOA {
        LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
            incentive.incentivizedSlippageTolerance,
            exchangeSettings[_exchangeName].incentivizedTwapMaxTradeSize,
            _exchangeName
        );

        // Use the exchangeLastTradeTimestamp so it can ripcord quickly with multiple exchanges
        _validateRipcord(leverageInfo, exchangeSettings[_exchangeName].exchangeLastTradeTimestamp);

        ( uint256 chunkRebalanceNotional, ) = _calculateChunkRebalanceNotional(leverageInfo, methodology.maxLeverageRatio, false);

        _delever(leverageInfo, chunkRebalanceNotional);

        _updateRipcordState(_exchangeName);

        uint256 etherTransferred = _transferEtherRewardToCaller(incentive.etherReward);

        emit RipcordCalled(
            leverageInfo.currentLeverageRatio,
            methodology.maxLeverageRatio,
            chunkRebalanceNotional,
            etherTransferred
        );
    }

    /**
     * OPERATOR ONLY: Return leverage ratio to 1x and delever to repay loan. This can be used for upgrading or shutting down the strategy. SetToken will redeem
     * collateral position and trade for debt position to repay Compound. If the chunk rebalance size is less than the total notional size, then this function will
     * delever and repay entire borrow balance on Compound. If chunk rebalance size is above max borrow or max trade size, then operator must
     * continue to call this function to complete repayment of loan. The function iterateRebalance will not work.
     *
     * Note: Delever to 0 will likely result in additional units of the borrow asset added as equity on the SetToken due to oracle price / market price mismatch
     *
     * @param _exchangeName     the exchange used for trading
     */
    function disengage(string memory _exchangeName) external onlyOperator {
        LeverageInfo memory leverageInfo = _getAndValidateLeveragedInfo(
            execution.slippageTolerance,
            exchangeSettings[_exchangeName].twapMaxTradeSize,
            _exchangeName
        );

        uint256 newLeverageRatio = PreciseUnitMath.preciseUnit();

        (
            uint256 chunkRebalanceNotional,
            uint256 totalRebalanceNotional
        ) = _calculateChunkRebalanceNotional(leverageInfo, newLeverageRatio, false);

        if (totalRebalanceNotional > chunkRebalanceNotional) {
            _delever(leverageInfo, chunkRebalanceNotional);
        } else {
            _deleverToZeroBorrowBalance(leverageInfo, totalRebalanceNotional);
        }

        emit Disengaged(
            leverageInfo.currentLeverageRatio,
            newLeverageRatio,
            chunkRebalanceNotional,
            totalRebalanceNotional
        );
    }

    /**
     * OPERATOR ONLY: Set methodology settings and check new settings are valid. Note: Need to pass in existing parameters if only changing a few settings. Must not be
     * in a rebalance.
     *
     * @param _newMethodologySettings          Struct containing methodology parameters
     */
    function setMethodologySettings(MethodologySettings memory _newMethodologySettings) external onlyOperator noRebalanceInProgress {
        methodology = _newMethodologySettings;

        _validateNonExchangeSettings(methodology, execution, incentive);

        emit MethodologySettingsUpdated(
            methodology.targetLeverageRatio,
            methodology.minLeverageRatio,
            methodology.maxLeverageRatio,
            methodology.recenteringSpeed,
            methodology.rebalanceInterval
        );
    }

    /**
     * OPERATOR ONLY: Set execution settings and check new settings are valid. Note: Need to pass in existing parameters if only changing a few settings. Must not be
     * in a rebalance.
     *
     * @param _newExecutionSettings          Struct containing execution parameters
     */
    function setExecutionSettings(ExecutionSettings memory _newExecutionSettings) external onlyOperator noRebalanceInProgress {
        execution = _newExecutionSettings;

        _validateNonExchangeSettings(methodology, execution, incentive);

        emit ExecutionSettingsUpdated(
            execution.unutilizedLeveragePercentage,
            execution.twapCooldownPeriod,
            execution.slippageTolerance
        );
    }

    /**
     * OPERATOR ONLY: Set incentive settings and check new settings are valid. Note: Need to pass in existing parameters if only changing a few settings. Must not be
     * in a rebalance.
     *
     * @param _newIncentiveSettings          Struct containing incentive parameters
     */
    function setIncentiveSettings(IncentiveSettings memory _newIncentiveSettings) external onlyOperator noRebalanceInProgress {
        incentive = _newIncentiveSettings;

        _validateNonExchangeSettings(methodology, execution, incentive);

        emit IncentiveSettingsUpdated(
            incentive.etherReward,
            incentive.incentivizedLeverageRatio,
            incentive.incentivizedSlippageTolerance,
            incentive.incentivizedTwapCooldownPeriod
        );
    }

    /**
     * OPERATOR ONLY: Add a new enabled exchange for trading during rebalances. New exchanges will have their exchangeLastTradeTimestamp set to 0. Adding
     * exchanges during rebalances is allowed, as it is not possible to enter an unexpected state while doing so.
     *
     * @param _exchangeName         Name of the exchange
     * @param _exchangeSettings     Struct containing exchange parameters
     */
    function addEnabledExchange(
        string memory _exchangeName,
        ExchangeSettings memory _exchangeSettings
    )
        external
        onlyOperator
    {
        require(exchangeSettings[_exchangeName].twapMaxTradeSize == 0, "Exchange already enabled");
        _validateExchangeSettings(_exchangeSettings);

        exchangeSettings[_exchangeName].twapMaxTradeSize = _exchangeSettings.twapMaxTradeSize;
        exchangeSettings[_exchangeName].incentivizedTwapMaxTradeSize = _exchangeSettings.incentivizedTwapMaxTradeSize;
        exchangeSettings[_exchangeName].leverExchangeData = _exchangeSettings.leverExchangeData;
        exchangeSettings[_exchangeName].deleverExchangeData = _exchangeSettings.deleverExchangeData;
        exchangeSettings[_exchangeName].exchangeLastTradeTimestamp = 0;

        enabledExchanges.push(_exchangeName);

        emit ExchangeAdded(
            _exchangeName,
            _exchangeSettings.twapMaxTradeSize,
            _exchangeSettings.exchangeLastTradeTimestamp,
            _exchangeSettings.incentivizedTwapMaxTradeSize,
            _exchangeSettings.leverExchangeData,
            _exchangeSettings.deleverExchangeData
        );
    }

    /**
     * OPERATOR ONLY: Removes an exchange. Reverts if the exchange is not already enabled. Removing exchanges during rebalances is allowed,
     * as it is not possible to enter an unexpected state while doing so.
     *
     * @param _exchangeName     Name of exchange to remove
     */
    function removeEnabledExchange(string memory _exchangeName) external onlyOperator {
        require(exchangeSettings[_exchangeName].twapMaxTradeSize != 0, "Exchange not enabled");

        delete exchangeSettings[_exchangeName];
        enabledExchanges.removeStorage(_exchangeName);

        emit ExchangeRemoved(_exchangeName);
    }

    /**
     * OPERATOR ONLY: Updates the settings of an exchange. Reverts if exchange is not already added. When updating an exchange, exchangeLastTradeTimestamp
     * is preserved. Updating exchanges during rebalances is allowed, as it is not possible to enter an unexpected state while doing so. Note: Need to
     * pass in all existing parameters even if only changing a few settings.
     *
     * @param _exchangeName         Name of the exchange
     * @param _exchangeSettings     Struct containing exchange parameters
     */
    function updateEnabledExchange(
        string memory _exchangeName,
        ExchangeSettings memory _exchangeSettings
    )
        external
        onlyOperator
    {
        require(exchangeSettings[_exchangeName].twapMaxTradeSize != 0, "Exchange not enabled");
        _validateExchangeSettings(_exchangeSettings);

        exchangeSettings[_exchangeName].twapMaxTradeSize = _exchangeSettings.twapMaxTradeSize;
        exchangeSettings[_exchangeName].incentivizedTwapMaxTradeSize = _exchangeSettings.incentivizedTwapMaxTradeSize;
        exchangeSettings[_exchangeName].leverExchangeData = _exchangeSettings.leverExchangeData;
        exchangeSettings[_exchangeName].deleverExchangeData = _exchangeSettings.deleverExchangeData;

        emit ExchangeUpdated(
            _exchangeName,
            _exchangeSettings.twapMaxTradeSize,
            _exchangeSettings.exchangeLastTradeTimestamp,
            _exchangeSettings.incentivizedTwapMaxTradeSize,
            _exchangeSettings.leverExchangeData,
            _exchangeSettings.deleverExchangeData
        );
    }

    /**
     * OPERATOR ONLY: Withdraw entire balance of ETH in this contract to operator. Rebalance must not be in progress
     */
    function withdrawEtherBalance() external onlyOperator noRebalanceInProgress {
        msg.sender.transfer(address(this).balance);
    }

    receive() external payable {}

    /* ============ External Getter Functions ============ */

    /**
     * Get current leverage ratio. Current leverage ratio is defined as the USD value of the collateral divided by the USD value of the SetToken. Prices for collateral
     * and borrow asset are retrieved from the Compound Price Oracle.
     *
     * return currentLeverageRatio         Current leverage ratio in precise units (10e18)
     */
    function getCurrentLeverageRatio() public view returns(uint256) {
        ActionInfo memory currentLeverageInfo = _createActionInfo();

        return _calculateCurrentLeverageRatio(currentLeverageInfo.collateralValue, currentLeverageInfo.borrowValue);
    }

    /**
     * Calculates the chunk rebalance size. This can be used by external contracts and keeper bots to calculate the optimal exchange to rebalance with.
     * Note: this function does not take into account timestamps, so it may return a nonzero value even when shouldRebalance would return ShouldRebalance.NONE for
     * all exchanges (since minimum delays have not elapsed)
     *
     * @param _exchangeNames    Array of exchange names to get rebalance sizes for
     *
     * @return sizes            Array of total notional chunk size. Measured in the asset that would be sold
     * @return sellAsset        Asset that would be sold during a rebalance
     * @return buyAsset         Asset that would be purchased during a rebalance
     */
    function getChunkRebalanceNotional(
        string[] calldata _exchangeNames
    )
        external
        view
        returns(uint256[] memory sizes, address sellAsset, address buyAsset)
    {

        uint256 newLeverageRatio;
        uint256 currentLeverageRatio = getCurrentLeverageRatio();
        bool isRipcord = false;

        // if over incentivized leverage ratio, always ripcord
        if (currentLeverageRatio > incentive.incentivizedLeverageRatio) {
            newLeverageRatio = methodology.maxLeverageRatio;
            isRipcord = true;
        // if we are in an ongoing twap, use the cached twapLeverageRatio as our target leverage
        } else if (twapLeverageRatio > 0) {
            newLeverageRatio = twapLeverageRatio;
        // if all else is false, then we would just use the normal rebalance new leverage ratio calculation
        } else {
            newLeverageRatio = _calculateNewLeverageRatio(currentLeverageRatio);
        }

        ActionInfo memory actionInfo = _createActionInfo();
        bool isLever = newLeverageRatio > currentLeverageRatio;

        sizes = new uint256[](_exchangeNames.length);

        for (uint256 i = 0; i < _exchangeNames.length; i++) {

            LeverageInfo memory leverageInfo = LeverageInfo({
                action: actionInfo,
                currentLeverageRatio: currentLeverageRatio,
                slippageTolerance: isRipcord ? incentive.incentivizedSlippageTolerance : execution.slippageTolerance,
                twapMaxTradeSize: isRipcord ?
                    exchangeSettings[_exchangeNames[i]].incentivizedTwapMaxTradeSize :
                    exchangeSettings[_exchangeNames[i]].twapMaxTradeSize,
                exchangeName: _exchangeNames[i]
            });

            (uint256 collateralNotional, ) = _calculateChunkRebalanceNotional(leverageInfo, newLeverageRatio, isLever);

            // _calculateBorrowUnits can convert both unit and notional values
            sizes[i] = isLever ? _calculateBorrowUnits(collateralNotional, leverageInfo.action) : collateralNotional;
        }

        sellAsset = isLever ? strategy.borrowAsset : strategy.collateralAsset;
        buyAsset = isLever ? strategy.collateralAsset : strategy.borrowAsset;
    }

    /**
     * Get current Ether incentive for when current leverage ratio exceeds incentivized leverage ratio and ripcord can be called. If ETH balance on the contract is
     * below the etherReward, then return the balance of ETH instead.
     *
     * return etherReward               Quantity of ETH reward in base units (10e18)
     */
    function getCurrentEtherIncentive() external view returns(uint256) {
        uint256 currentLeverageRatio = getCurrentLeverageRatio();

        if (currentLeverageRatio >= incentive.incentivizedLeverageRatio) {
            // If ETH reward is below the balance on this contract, then return ETH balance on contract instead
            return incentive.etherReward < address(this).balance ? incentive.etherReward : address(this).balance;
        } else {
            return 0;
        }
    }

    /**
     * Helper that checks if conditions are met for rebalance or ripcord. Returns an enum with 0 = no rebalance, 1 = call rebalance(), 2 = call iterateRebalance()
     * 3 = call ripcord()
     *
     * @return (string[] memory, ShouldRebalance[] memory)      List of exchange names and a list of enums representing whether that exchange should rebalance
     */
    function shouldRebalance() external view returns(string[] memory, ShouldRebalance[] memory) {
        uint256 currentLeverageRatio = getCurrentLeverageRatio();

        return _shouldRebalance(currentLeverageRatio, methodology.minLeverageRatio, methodology.maxLeverageRatio);
    }

    /**
     * Helper that checks if conditions are met for rebalance or ripcord with custom max and min bounds specified by caller. This function simplifies the
     * logic for off-chain keeper bots to determine what threshold to call rebalance when leverage exceeds max or drops below min. Returns an enum with
     * 0 = no rebalance, 1 = call rebalance(), 2 = call iterateRebalance()3 = call ripcord()
     *
     * @param _customMinLeverageRatio          Min leverage ratio passed in by caller
     * @param _customMaxLeverageRatio          Max leverage ratio passed in by caller
     *
     * @return (string[] memory, ShouldRebalance[] memory)      List of exchange names and a list of enums representing whether that exchange should rebalance
     */
    function shouldRebalanceWithBounds(
        uint256 _customMinLeverageRatio,
        uint256 _customMaxLeverageRatio
    )
        external
        view
        returns(string[] memory, ShouldRebalance[] memory)
    {
        require (
            _customMinLeverageRatio <= methodology.minLeverageRatio && _customMaxLeverageRatio >= methodology.maxLeverageRatio,
            "Custom bounds must be valid"
        );

        uint256 currentLeverageRatio = getCurrentLeverageRatio();

        return _shouldRebalance(currentLeverageRatio, _customMinLeverageRatio, _customMaxLeverageRatio);
    }

    /**
     * Gets the list of enabled exchanges
     */
    function getEnabledExchanges() external view returns (string[] memory) {
        return enabledExchanges;
    }

    /**
     * Explicit getter functions for parameter structs are defined as workaround to issues fetching structs that have dynamic types.
     */
    function getStrategy() external view returns (ContractSettings memory) { return strategy; }
    function getMethodology() external view returns (MethodologySettings memory) { return methodology; }
    function getExecution() external view returns (ExecutionSettings memory) { return execution; }
    function getIncentive() external view returns (IncentiveSettings memory) { return incentive; }
    function getExchangeSettings(string memory _exchangeName) external view returns (ExchangeSettings memory) {
        return exchangeSettings[_exchangeName];
    }

    /* ============ Internal Functions ============ */

    /**
     * Calculate notional rebalance quantity, whether to chunk rebalance based on max trade size and max borrow and invoke lever on CompoundLeverageModule
     *
     */
     function _lever(
        LeverageInfo memory _leverageInfo,
        uint256 _chunkRebalanceNotional
    )
        internal
    {
        uint256 collateralRebalanceUnits = _chunkRebalanceNotional.preciseDiv(_leverageInfo.action.setTotalSupply);

        uint256 borrowUnits = _calculateBorrowUnits(collateralRebalanceUnits, _leverageInfo.action);

        uint256 minReceiveCollateralUnits = _calculateMinCollateralReceiveUnits(collateralRebalanceUnits, _leverageInfo.slippageTolerance);

        bytes memory leverCallData = abi.encodeWithSignature(
            "lever(address,address,address,uint256,uint256,string,bytes)",
            address(strategy.setToken),
            strategy.borrowAsset,
            strategy.collateralAsset,
            borrowUnits,
            minReceiveCollateralUnits,
            _leverageInfo.exchangeName,
            exchangeSettings[_leverageInfo.exchangeName].leverExchangeData
        );

        invokeManager(address(strategy.leverageModule), leverCallData);
    }

    /**
     * Calculate delever units Invoke delever on CompoundLeverageModule.
     */
    function _delever(
        LeverageInfo memory _leverageInfo,
        uint256 _chunkRebalanceNotional
    )
        internal
    {
        uint256 collateralRebalanceUnits = _chunkRebalanceNotional.preciseDiv(_leverageInfo.action.setTotalSupply);

        uint256 minRepayUnits = _calculateMinRepayUnits(collateralRebalanceUnits, _leverageInfo.slippageTolerance, _leverageInfo.action);

        bytes memory deleverCallData = abi.encodeWithSignature(
            "delever(address,address,address,uint256,uint256,string,bytes)",
            address(strategy.setToken),
            strategy.collateralAsset,
            strategy.borrowAsset,
            collateralRebalanceUnits,
            minRepayUnits,
            _leverageInfo.exchangeName,
            exchangeSettings[_leverageInfo.exchangeName].deleverExchangeData
        );

        invokeManager(address(strategy.leverageModule), deleverCallData);
    }

    /**
     * Invoke deleverToZeroBorrowBalance on CompoundLeverageModule.
     */
    function _deleverToZeroBorrowBalance(
        LeverageInfo memory _leverageInfo,
        uint256 _chunkRebalanceNotional
    )
        internal
    {
        // Account for slippage tolerance in redeem quantity for the deleverToZeroBorrowBalance function
        uint256 maxCollateralRebalanceUnits = _chunkRebalanceNotional
            .preciseMul(PreciseUnitMath.preciseUnit().add(execution.slippageTolerance))
            .preciseDiv(_leverageInfo.action.setTotalSupply);

        bytes memory deleverToZeroBorrowBalanceCallData = abi.encodeWithSignature(
            "deleverToZeroBorrowBalance(address,address,address,uint256,string,bytes)",
            address(strategy.setToken),
            strategy.collateralAsset,
            strategy.borrowAsset,
            maxCollateralRebalanceUnits,
            _leverageInfo.exchangeName,
            exchangeSettings[_leverageInfo.exchangeName].deleverExchangeData
        );

        invokeManager(address(strategy.leverageModule), deleverToZeroBorrowBalanceCallData);
    }

    /**
     * Check whether to delever or lever based on the current vs new leverage ratios. Used in the rebalance() and iterateRebalance() functions
     *
     * return uint256           Calculated notional to trade
     * return uint256           Total notional to rebalance over TWAP
     */
    function _handleRebalance(LeverageInfo memory _leverageInfo, uint256 _newLeverageRatio) internal returns(uint256, uint256) {
        uint256 chunkRebalanceNotional;
        uint256 totalRebalanceNotional;
        if (_newLeverageRatio < _leverageInfo.currentLeverageRatio) {
            (
                chunkRebalanceNotional,
                totalRebalanceNotional
            ) = _calculateChunkRebalanceNotional(_leverageInfo, _newLeverageRatio, false);

            _delever(_leverageInfo, chunkRebalanceNotional);
        } else {
            (
                chunkRebalanceNotional,
                totalRebalanceNotional
            ) = _calculateChunkRebalanceNotional(_leverageInfo, _newLeverageRatio, true);

            _lever(_leverageInfo, chunkRebalanceNotional);
        }

        return (chunkRebalanceNotional, totalRebalanceNotional);
    }

    /**
     * Create the leverage info struct to be used in internal functions
     *
     * return LeverageInfo                Struct containing ActionInfo and other data
     */
    function _getAndValidateLeveragedInfo(uint256 _slippageTolerance, uint256 _maxTradeSize, string memory _exchangeName) internal view returns(LeverageInfo memory) {
        // Assume if maxTradeSize is 0, then the exchange is not enabled. This is enforced by addEnabledExchange and updateEnabledExchange
        require(_maxTradeSize > 0, "Must be valid exchange");

        ActionInfo memory actionInfo = _createActionInfo();

        require(actionInfo.setTotalSupply > 0, "SetToken must have > 0 supply");
        require(actionInfo.collateralBalance > 0, "Collateral balance must be > 0");
        require(actionInfo.borrowBalance > 0, "Borrow balance must exist");

        // Get current leverage ratio
        uint256 currentLeverageRatio = _calculateCurrentLeverageRatio(
            actionInfo.collateralValue,
            actionInfo.borrowValue
        );

        return LeverageInfo({
            action: actionInfo,
            currentLeverageRatio: currentLeverageRatio,
            slippageTolerance: _slippageTolerance,
            twapMaxTradeSize: _maxTradeSize,
            exchangeName: _exchangeName
        });
    }

    /**
     * Create the action info struct to be used in internal functions
     *
     * return ActionInfo                Struct containing data used by internal lever and delever functions
     */
    function _createActionInfo() internal view returns(ActionInfo memory) {
        ActionInfo memory rebalanceInfo;

        // Calculate prices from chainlink. Adjusts decimals to be in line with Compound's oracles. Chainlink returns prices with 8 decimal places, but
        // compound expects 36 - underlyingDecimals decimal places from their oracles. This is so that when the underlying amount is multiplied by the
        // received price, the collateral valuation is normalized to 36 decimals. To perform this adjustment, we multiply by 10^(36 - 8 - underlyingDeciamls)
        int256 rawCollateralPrice = strategy.collateralPriceOracle.latestAnswer();
        rebalanceInfo.collateralPrice = rawCollateralPrice.toUint256().mul(10 ** strategy.collateralDecimalAdjustment);
        int256 rawBorrowPrice = strategy.borrowPriceOracle.latestAnswer();
        rebalanceInfo.borrowPrice = rawBorrowPrice.toUint256().mul(10 ** strategy.borrowDecimalAdjustment);

        // Calculate stored exchange rate which does not trigger a state update
        uint256 cTokenBalance = strategy.targetCollateralCToken.balanceOf(address(strategy.setToken));
        rebalanceInfo.collateralBalance = cTokenBalance.preciseMul(strategy.targetCollateralCToken.exchangeRateStored());
        rebalanceInfo.borrowBalance = strategy.targetBorrowCToken.borrowBalanceStored(address(strategy.setToken));
        rebalanceInfo.collateralValue = rebalanceInfo.collateralPrice.preciseMul(rebalanceInfo.collateralBalance);
        rebalanceInfo.borrowValue = rebalanceInfo.borrowPrice.preciseMul(rebalanceInfo.borrowBalance);
        rebalanceInfo.setTotalSupply = strategy.setToken.totalSupply();

        return rebalanceInfo;
    }

    /**
     * Validate non-exchange settings in constructor and setters when updating.
     */
    function _validateNonExchangeSettings(
        MethodologySettings memory _methodology,
        ExecutionSettings memory _execution,
        IncentiveSettings memory _incentive
    )
        internal
        pure
    {
        require (
            _methodology.minLeverageRatio <= _methodology.targetLeverageRatio && _methodology.minLeverageRatio > 0,
            "Must be valid min leverage"
        );
        require (
            _methodology.maxLeverageRatio >= _methodology.targetLeverageRatio,
            "Must be valid max leverage"
        );
        require (
            _methodology.recenteringSpeed <= PreciseUnitMath.preciseUnit() && _methodology.recenteringSpeed > 0,
            "Must be valid recentering speed"
        );
        require (
            _execution.unutilizedLeveragePercentage <= PreciseUnitMath.preciseUnit(),
            "Unutilized leverage must be <100%"
        );
        require (
            _execution.slippageTolerance <= PreciseUnitMath.preciseUnit(),
            "Slippage tolerance must be <100%"
        );
        require (
            _incentive.incentivizedSlippageTolerance <= PreciseUnitMath.preciseUnit(),
            "Incentivized slippage tolerance must be <100%"
        );
        require (
            _incentive.incentivizedLeverageRatio >= _methodology.maxLeverageRatio,
            "Incentivized leverage ratio must be > max leverage ratio"
        );
        require (
            _methodology.rebalanceInterval >= _execution.twapCooldownPeriod,
            "Rebalance interval must be greater than TWAP cooldown period"
        );
        require (
            _execution.twapCooldownPeriod >= _incentive.incentivizedTwapCooldownPeriod,
            "TWAP cooldown must be greater than incentivized TWAP cooldown"
        );
    }

    /**
     * Validate an ExchangeSettings struct when adding or updating an exchange. Does not validate that twapMaxTradeSize < incentivizedMaxTradeSize since
     * it may be useful to disable exchanges for ripcord by setting incentivizedMaxTradeSize to 0.
     */
     function _validateExchangeSettings(ExchangeSettings memory _settings) internal pure {
         require(_settings.twapMaxTradeSize != 0, "Max TWAP trade size must not be 0");
     }

    /**
     * Validate that current leverage is below incentivized leverage ratio and cooldown / rebalance period has elapsed or outsize max/min bounds. Used
     * in rebalance() and iterateRebalance() functions
     */
    function _validateNormalRebalance(LeverageInfo memory _leverageInfo, uint256 _coolDown, uint256 _lastTradeTimestamp) internal view {
        require(_leverageInfo.currentLeverageRatio < incentive.incentivizedLeverageRatio, "Must be below incentivized leverage ratio");
        require(
            block.timestamp.sub(_lastTradeTimestamp) > _coolDown
            || _leverageInfo.currentLeverageRatio > methodology.maxLeverageRatio
            || _leverageInfo.currentLeverageRatio < methodology.minLeverageRatio,
            "Cooldown not elapsed or not valid leverage ratio"
        );
    }

    /**
     * Validate that current leverage is above incentivized leverage ratio and incentivized cooldown period has elapsed in ripcord()
     */
    function _validateRipcord(LeverageInfo memory _leverageInfo, uint256 _lastTradeTimestamp) internal view {
        require(_leverageInfo.currentLeverageRatio >= incentive.incentivizedLeverageRatio, "Must be above incentivized leverage ratio");
        // If currently in the midst of a TWAP rebalance, ensure that the cooldown period has elapsed
        require(_lastTradeTimestamp.add(incentive.incentivizedTwapCooldownPeriod) < block.timestamp, "TWAP cooldown must have elapsed");
    }

    /**
     * Validate TWAP in the iterateRebalance() function
     */
    function _validateTWAP() internal view {
        require(twapLeverageRatio > 0, "Not in TWAP state");
    }

    /**
     * Validate not TWAP in the rebalance() function
     */
    function _validateNonTWAP() internal view {
        require(twapLeverageRatio == 0, "Must call iterate");
    }

    /**
     * Check if price has moved advantageously while in the midst of the TWAP rebalance. This means the current leverage ratio has moved over/under
     * the stored TWAP leverage ratio on lever/delever so there is no need to execute a rebalance. Used in iterateRebalance()
     */
    function _isAdvantageousTWAP(uint256 _currentLeverageRatio) internal view returns (bool) {
        return (
            (twapLeverageRatio < methodology.targetLeverageRatio && _currentLeverageRatio >= twapLeverageRatio)
            || (twapLeverageRatio > methodology.targetLeverageRatio && _currentLeverageRatio <= twapLeverageRatio)
        );
    }

    /**
     * Calculate the current leverage ratio given a valuation of the collateral and borrow asset, which is calculated as collateral USD valuation / SetToken USD valuation
     *
     * return uint256            Current leverage ratio
     */
    function _calculateCurrentLeverageRatio(
        uint256 _collateralValue,
        uint256 _borrowValue
    )
        internal
        pure
        returns(uint256)
    {
        return _collateralValue.preciseDiv(_collateralValue.sub(_borrowValue));
    }

    /**
     * Calculate the new leverage ratio using the flexible leverage methodology. The methodology reduces the size of each rebalance by weighting
     * the current leverage ratio against the target leverage ratio by the recentering speed percentage. The lower the recentering speed, the slower
     * the leverage token will move towards the target leverage each rebalance.
     *
     * return uint256          New leverage ratio based on the flexible leverage methodology
     */
    function _calculateNewLeverageRatio(uint256 _currentLeverageRatio) internal view returns(uint256) {
        // CLRt+1 = max(MINLR, min(MAXLR, CLRt * (1 - RS) + TLR * RS))
        // a: TLR * RS
        // b: (1- RS) * CLRt
        // c: (1- RS) * CLRt + TLR * RS
        // d: min(MAXLR, CLRt * (1 - RS) + TLR * RS)
        uint256 a = methodology.targetLeverageRatio.preciseMul(methodology.recenteringSpeed);
        uint256 b = PreciseUnitMath.preciseUnit().sub(methodology.recenteringSpeed).preciseMul(_currentLeverageRatio);
        uint256 c = a.add(b);
        uint256 d = Math.min(c, methodology.maxLeverageRatio);
        return Math.max(methodology.minLeverageRatio, d);
    }

    /**
     * Calculate total notional rebalance quantity and chunked rebalance quantity in collateral units.
     *
     * return uint256          Chunked rebalance notional in collateral units
     * return uint256          Total rebalance notional in collateral units
     */
    function _calculateChunkRebalanceNotional(
        LeverageInfo memory _leverageInfo,
        uint256 _newLeverageRatio,
        bool _isLever
    )
        internal
        view
        returns (uint256, uint256)
    {
        // Calculate absolute value of difference between new and current leverage ratio
        uint256 leverageRatioDifference = _isLever ? _newLeverageRatio.sub(_leverageInfo.currentLeverageRatio) : _leverageInfo.currentLeverageRatio.sub(_newLeverageRatio);

        uint256 totalRebalanceNotional = leverageRatioDifference.preciseDiv(_leverageInfo.currentLeverageRatio).preciseMul(_leverageInfo.action.collateralBalance);

        uint256 maxBorrow = _calculateMaxBorrowCollateral(_leverageInfo.action, _isLever);

        uint256 chunkRebalanceNotional = Math.min(Math.min(maxBorrow, totalRebalanceNotional), _leverageInfo.twapMaxTradeSize);

        return (chunkRebalanceNotional, totalRebalanceNotional);
    }

    /**
     * Calculate the max borrow / repay amount allowed in collateral units for lever / delever. This is due to overcollateralization requirements on
     * assets deposited in lending protocols for borrowing.
     *
     * For lever, max borrow is calculated as:
     * (Net borrow limit in USD - existing borrow value in USD) / collateral asset price adjusted for decimals
     *
     * For delever, max borrow is calculated as:
     * Collateral balance in base units * (net borrow limit in USD - existing borrow value in USD) / net borrow limit in USD
     *
     * Net borrow limit is calculated as:
     * The collateral value in USD * Compound collateral factor * (1 - unutilized leverage %)
     *
     * return uint256          Max borrow notional denominated in collateral asset
     */
    function _calculateMaxBorrowCollateral(ActionInfo memory _actionInfo, bool _isLever) internal view returns(uint256) {
        // Retrieve collateral factor which is the % increase in borrow limit in precise units (75% = 75 * 1e16)
        ( , uint256 collateralFactorMantissa, ) = strategy.comptroller.markets(address(strategy.targetCollateralCToken));

        uint256 netBorrowLimit = _actionInfo.collateralValue
            .preciseMul(collateralFactorMantissa)
            .preciseMul(PreciseUnitMath.preciseUnit().sub(execution.unutilizedLeveragePercentage));

        if (_isLever) {
            return netBorrowLimit
                .sub(_actionInfo.borrowValue)
                .preciseDiv(_actionInfo.collateralPrice);
        } else {
            return _actionInfo.collateralBalance
                .preciseMul(netBorrowLimit.sub(_actionInfo.borrowValue))
                .preciseDiv(netBorrowLimit);
        }
    }

    /**
     * Derive the borrow units for lever. The units are calculated by the collateral units multiplied by collateral / borrow asset price. Oracle prices
     * have already been adjusted for the decimals in the token.
     *
     * return uint256           Position units to borrow
     */
    function _calculateBorrowUnits(uint256 _collateralRebalanceUnits, ActionInfo memory _actionInfo) internal pure returns (uint256) {
        return _collateralRebalanceUnits.preciseMul(_actionInfo.collateralPrice).preciseDiv(_actionInfo.borrowPrice);
    }

    /**
     * Calculate the min receive units in collateral units for lever. Units are calculated as target collateral rebalance units multiplied by slippage tolerance
     *
     * return uint256           Min position units to receive after lever trade
     */
    function _calculateMinCollateralReceiveUnits(uint256 _collateralRebalanceUnits, uint256 _slippageTolerance) internal pure returns (uint256) {
        return _collateralRebalanceUnits.preciseMul(PreciseUnitMath.preciseUnit().sub(_slippageTolerance));
    }

    /**
     * Derive the min repay units from collateral units for delever. Units are calculated as target collateral rebalance units multiplied by slippage tolerance
     * and pair price (collateral oracle price / borrow oracle price). Oracle prices have already been adjusted for the decimals in the token.
     *
     * return uint256           Min position units to repay in borrow asset
     */
    function _calculateMinRepayUnits(uint256 _collateralRebalanceUnits, uint256 _slippageTolerance, ActionInfo memory _actionInfo) internal pure returns (uint256) {
        return _collateralRebalanceUnits
            .preciseMul(_actionInfo.collateralPrice)
            .preciseDiv(_actionInfo.borrowPrice)
            .preciseMul(PreciseUnitMath.preciseUnit().sub(_slippageTolerance));
    }

    /**
     * Update last trade timestamp and if chunk rebalance size is less than total rebalance notional, store new leverage ratio to kick off TWAP. Used in
     * the engage() and rebalance() functions
     */
    function _updateRebalanceState(
        uint256 _chunkRebalanceNotional,
        uint256 _totalRebalanceNotional,
        uint256 _newLeverageRatio,
        string memory _exchangeName
    )
        internal
    {

        _updateLastTradeTimestamp(_exchangeName);

        if (_chunkRebalanceNotional < _totalRebalanceNotional) {
            twapLeverageRatio = _newLeverageRatio;
        }
    }

    /**
     * Update last trade timestamp and if chunk rebalance size is equal to the total rebalance notional, end TWAP by clearing state. This function is used
     * in iterateRebalance()
     */
    function _updateIterateState(uint256 _chunkRebalanceNotional, uint256 _totalRebalanceNotional, string memory _exchangeName) internal {

        _updateLastTradeTimestamp(_exchangeName);

        // If the chunk size is equal to the total notional meaning that rebalances are not chunked, then clear TWAP state.
        if (_chunkRebalanceNotional == _totalRebalanceNotional) {
            delete twapLeverageRatio;
        }
    }

    /**
     * Update last trade timestamp and if currently in a TWAP, delete the TWAP state. Used in the ripcord() function.
     */
    function _updateRipcordState(string memory _exchangeName) internal {

        _updateLastTradeTimestamp(_exchangeName);

        // If TWAP leverage ratio is stored, then clear state. This may happen if we are currently in a TWAP rebalance, and the leverage ratio moves above the
        // incentivized threshold for ripcord.
        if (twapLeverageRatio > 0) {
            delete twapLeverageRatio;
        }
    }

    /**
     * Update globalLastTradeTimestamp and exchangeLastTradeTimestamp values. This function updates both the exchange-specific and global timestamp so that the
     * epoch rebalance can use the global timestamp (since the global timestamp is always  equal to the most recently used exchange timestamp). This allows for
     * multiple rebalances to occur simultaneously since only the exchange-specific timestamp is checked for non-epoch rebalances.
     */
     function _updateLastTradeTimestamp(string memory _exchangeName) internal {
        globalLastTradeTimestamp = block.timestamp;
        exchangeSettings[_exchangeName].exchangeLastTradeTimestamp = block.timestamp;
     }

    /**
     * Transfer ETH reward to caller of the ripcord function. If the ETH balance on this contract is less than required
     * incentive quantity, then transfer contract balance instead to prevent reverts.
     *
     * return uint256           Amount of ETH transferred to caller
     */
    function _transferEtherRewardToCaller(uint256 _etherReward) internal returns(uint256) {
        uint256 etherToTransfer = _etherReward < address(this).balance ? _etherReward : address(this).balance;

        msg.sender.transfer(etherToTransfer);

        return etherToTransfer;
    }

    /**
     * Internal function returning the ShouldRebalance enum used in shouldRebalance and shouldRebalanceWithBounds external getter functions
     *
     * return ShouldRebalance         Enum detailing whether to rebalance, iterateRebalance, ripcord or no action
     */
    function _shouldRebalance(
        uint256 _currentLeverageRatio,
        uint256 _minLeverageRatio,
        uint256 _maxLeverageRatio
    )
        internal
        view
        returns(string[] memory, ShouldRebalance[] memory)
    {

        ShouldRebalance[] memory shouldRebalanceEnums = new ShouldRebalance[](enabledExchanges.length);

        for (uint256 i = 0; i < enabledExchanges.length; i++) {
            // If none of the below conditions are satisfied, then should not rebalance
            shouldRebalanceEnums[i] = ShouldRebalance.NONE;

            // If above ripcord threshold, then check if incentivized cooldown period has elapsed
            if (_currentLeverageRatio >= incentive.incentivizedLeverageRatio) {
                if (exchangeSettings[enabledExchanges[i]].exchangeLastTradeTimestamp.add(incentive.incentivizedTwapCooldownPeriod) < block.timestamp) {
                    shouldRebalanceEnums[i] = ShouldRebalance.RIPCORD;
                }
            } else {
                // If TWAP, then check if the cooldown period has elapsed
                if (twapLeverageRatio > 0) {
                    if (exchangeSettings[enabledExchanges[i]].exchangeLastTradeTimestamp.add(execution.twapCooldownPeriod) < block.timestamp) {
                        shouldRebalanceEnums[i] = ShouldRebalance.ITERATE_REBALANCE;
                    }
                } else {
                    // If not TWAP, then check if the rebalance interval has elapsed OR current leverage is above max leverage OR current leverage is below
                    // min leverage
                    if (
                        block.timestamp.sub(globalLastTradeTimestamp) > methodology.rebalanceInterval
                        || _currentLeverageRatio > _maxLeverageRatio
                        || _currentLeverageRatio < _minLeverageRatio
                    ) {
                        shouldRebalanceEnums[i] = ShouldRebalance.REBALANCE;
                    }
                }
            }
        }


        return (enabledExchanges, shouldRebalanceEnums);
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { FlexibleLeverageStrategyExtension } from "../adapters/FlexibleLeverageStrategyExtension.sol";

interface IFLIStrategyExtension {
    function getStrategy() external view returns (FlexibleLeverageStrategyExtension.ContractSettings memory);
    function getMethodology() external view returns (FlexibleLeverageStrategyExtension.MethodologySettings memory);
    function getIncentive() external view returns (FlexibleLeverageStrategyExtension.IncentiveSettings memory);
    function getExecution() external view returns (FlexibleLeverageStrategyExtension.ExecutionSettings memory);
    function getExchangeSettings(string memory _exchangeName) external view returns (FlexibleLeverageStrategyExtension.ExchangeSettings memory);
    function getEnabledExchanges() external view returns (string[] memory);

    function getCurrentLeverageRatio() external view returns (uint256);

    function getChunkRebalanceNotional(
        string[] calldata _exchangeNames
    )
        external
        view
        returns(uint256[] memory sizes, address sellAsset, address buyAsset);

    function shouldRebalance() external view returns(string[] memory, FlexibleLeverageStrategyExtension.ShouldRebalance[] memory);
    function shouldRebalanceWithBounds(
        uint256 _customMinLeverageRatio,
        uint256 _customMaxLeverageRatio
    )
        external
        view
        returns(string[] memory, FlexibleLeverageStrategyExtension.ShouldRebalance[] memory);
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

interface IUniswapV2Router {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;


/**
 * @title IComptroller
 *
 * Interface for interacting with Compound Comptroller
 */
interface IComptroller {

    /**
     * @notice Add assets to be included in account liquidity calculation
     * @param cTokens The list of addresses of the cToken markets to be enabled
     * @return Success indicator for whether each corresponding market was entered
     */
    function enterMarkets(address[] memory cTokens) external returns (uint256[] memory);

    /**
     * @notice Removes asset from sender's account liquidity calculation
     * @dev Sender must not have an outstanding borrow balance in the asset,
     *  or be providing neccessary collateral for an outstanding borrow.
     * @param cTokenAddress The address of the asset to be removed
     * @return Whether or not the account successfully exited the market
     */
    function exitMarket(address cTokenAddress) external returns (uint256);

    function claimComp(address holder) external;

    function markets(address cTokenAddress) external view returns (bool, uint256, bool);
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { StringArrayUtils } from "../lib/StringArrayUtils.sol";


contract StringArrayUtilsMock {
    using StringArrayUtils for string[];

    string[] public storageArray;

    function testIndexOf(string[] memory A, string memory a) external pure returns (uint256, bool) {
        return A.indexOf(a);
    }

    function testRemoveStorage(string memory a) external {
        storageArray.removeStorage(a);
    }

    function setStorageArray(string[] memory A) external {
        storageArray = A;
    }

    function getStorageArray() external view returns(string[] memory) {
        return storageArray;
    }
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { FlexibleLeverageStrategyExtension } from "../adapters/FlexibleLeverageStrategyExtension.sol";

// Mock contract for FlexibleLeverageStrategyExtension used to test FLIRebalanceViewer
contract FLIStrategyExtensionMock {

    string[] internal shouldRebalanceNames;
    FlexibleLeverageStrategyExtension.ShouldRebalance[] internal shouldRebalancesEnums;

    uint256[] internal chunkRebalanceSizes;
    address internal chunkRebalanceSellAsset;
    address internal chunkRebalanceBuyAsset;

    FlexibleLeverageStrategyExtension.ContractSettings internal strategy;

    mapping(string => FlexibleLeverageStrategyExtension.ExchangeSettings) internal exchangeSettings;


    function shouldRebalanceWithBounds(
        uint256 /* _customMinLeverageRatio */,
        uint256 /* _customMaxLeverageRatio */
    )
        external
        view
        returns(string[] memory, FlexibleLeverageStrategyExtension.ShouldRebalance[] memory)
    {
        return (shouldRebalanceNames, shouldRebalancesEnums);
    }

    function getChunkRebalanceNotional(
        string[] calldata /* _exchangeNames */
    )
        external
        view
        returns(uint256[] memory sizes, address sellAsset, address buyAsset)
    {
        sizes = chunkRebalanceSizes;
        sellAsset = chunkRebalanceSellAsset;
        buyAsset = chunkRebalanceBuyAsset;
    }

    function getStrategy() external view returns (FlexibleLeverageStrategyExtension.ContractSettings memory) {
        return strategy;
    }

    function getExchangeSettings(string memory _exchangeName) external view returns (FlexibleLeverageStrategyExtension.ExchangeSettings memory) {
        return exchangeSettings[_exchangeName];
    }

    function getEnabledExchanges() external view returns (string[] memory) {
        return shouldRebalanceNames;
    }

    /* =========== Functions for setting mock state =========== */

    function setShouldRebalanceWithBounds(
        string[] memory _shouldRebalanceNames,
        FlexibleLeverageStrategyExtension.ShouldRebalance[] memory _shouldRebalancesEnums
    )
        external
    {
        shouldRebalanceNames = _shouldRebalanceNames;
        shouldRebalancesEnums = _shouldRebalancesEnums;
    }

    function setGetChunkRebalanceWithBounds(
        uint256[] memory _chunkRebalanceSizes,
        address _chunkRebalanceSellAsset,
        address _chunkRebalanceBuyAsset
    )
        external
    {
        chunkRebalanceSizes = _chunkRebalanceSizes;
        chunkRebalanceSellAsset = _chunkRebalanceSellAsset;
        chunkRebalanceBuyAsset = _chunkRebalanceBuyAsset;
    }

    function setStrategy(FlexibleLeverageStrategyExtension.ContractSettings memory _strategy) external {
        strategy = _strategy;
    }

    function setExchangeSettings(string memory _exchangeName, FlexibleLeverageStrategyExtension.ExchangeSettings memory _settings) external {
        exchangeSettings[_exchangeName] = _settings;
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";

import { AddressArrayUtils } from "../lib/AddressArrayUtils.sol";
import { IExtension } from "../interfaces/IExtension.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { MutualUpgrade } from "../lib/MutualUpgrade.sol";


/**
 * @title BaseManagerV2
 * @author Set Protocol
 *
 * Smart contract manager that contains permissions and admin functionality. Implements IIP-64, supporting
 * a registry of protected modules that can only be upgraded with methodologist consent.
 */
contract BaseManagerV2 is MutualUpgrade {
    using Address for address;
    using AddressArrayUtils for address[];
    using SafeERC20 for IERC20;

    /* ============ Struct ========== */

    struct ProtectedModule {
        bool isProtected;                               // Flag set to true if module is protected
        address[] authorizedExtensionsList;             // List of Extensions authorized to call module
        mapping(address => bool) authorizedExtensions;  // Map of extensions authorized to call module
    }

    /* ============ Events ============ */

    event ExtensionAdded(
        address _extension
    );

    event ExtensionRemoved(
        address _extension
    );

    event MethodologistChanged(
        address _oldMethodologist,
        address _newMethodologist
    );

    event OperatorChanged(
        address _oldOperator,
        address _newOperator
    );

    event ExtensionAuthorized(
        address _module,
        address _extension
    );

    event ExtensionAuthorizationRevoked(
        address _module,
        address _extension
    );

    event ModuleProtected(
        address _module,
        address[] _extensions
    );

    event ModuleUnprotected(
        address _module
    );

    event ReplacedProtectedModule(
        address _oldModule,
        address _newModule,
        address[] _newExtensions
    );

    event EmergencyReplacedProtectedModule(
        address _module,
        address[] _extensions
    );

    event EmergencyRemovedProtectedModule(
        address _module
    );

    event EmergencyResolved();

    /* ============ Modifiers ============ */

    /**
     * Throws if the sender is not the SetToken operator
     */
    modifier onlyOperator() {
        require(msg.sender == operator, "Must be operator");
        _;
    }

    /**
     * Throws if the sender is not the SetToken methodologist
     */
    modifier onlyMethodologist() {
        require(msg.sender == methodologist, "Must be methodologist");
        _;
    }

    /**
     * Throws if the sender is not a listed extension
     */
    modifier onlyExtension() {
        require(isExtension[msg.sender], "Must be extension");
        _;
    }

    /**
     * Throws if contract is in an emergency state following a unilateral operator removal of a
     * protected module.
     */
    modifier upgradesPermitted() {
        require(emergencies == 0, "Upgrades paused by emergency");
        _;
    }

    /**
     * Throws if contract is *not* in an emergency state. Emergency replacement and resolution
     * can only happen in an emergency
     */
    modifier onlyEmergency() {
        require(emergencies > 0, "Not in emergency");
        _;
    }

    /* ============ State Variables ============ */

    // Instance of SetToken
    ISetToken public setToken;

    // Array of listed extensions
    address[] internal extensions;

    // Mapping to check if extension is added
    mapping(address => bool) public isExtension;

    // Address of operator which typically executes manager only functions on Set Protocol modules
    address public operator;

    // Address of methodologist which serves as providing methodology for the index
    address public methodologist;

    // Counter incremented when the operator "emergency removes" a protected module. Decremented
    // when methodologist executes an "emergency replacement". Operator can only add modules and
    // extensions when `emergencies` is zero. Emergencies can only be declared "over" by mutual agreement
    // between operator and methodologist or by the methodologist alone via `resolveEmergency`
    uint256 public emergencies;

    // Mapping of protected modules. These cannot be called or removed except by mutual upgrade.
    mapping(address => ProtectedModule) public protectedModules;

    // List of protected modules, for iteration. Used when checking that an extension removal
    // can happen without methodologist approval
    address[] public protectedModulesList;

    // Boolean set when methodologist authorizes initialization after contract deployment.
    // Must be true to call via `interactManager`.
    bool public initialized;

    /* ============ Constructor ============ */

    constructor(
        ISetToken _setToken,
        address _operator,
        address _methodologist
    )
        public
    {
        setToken = _setToken;
        operator = _operator;
        methodologist = _methodologist;
    }

    /* ============ External Functions ============ */

    /**
     * ONLY METHODOLOGIST : Called by the methodologist to enable contract. All `interactManager`
     * calls revert until this is invoked. Lets methodologist review and authorize initial protected
     * module settings.
     */
    function authorizeInitialization() external onlyMethodologist {
        require(!initialized, "Initialization authorized");
        initialized = true;
    }

    /**
     * MUTUAL UPGRADE: Update the SetToken manager address. Operator and Methodologist must each call
     * this function to execute the update.
     *
     * @param _newManager           New manager address
     */
    function setManager(address _newManager) external mutualUpgrade(operator, methodologist) {
        require(_newManager != address(0), "Zero address not valid");
        setToken.setManager(_newManager);
    }

    /**
     * OPERATOR ONLY: Add a new extension that the BaseManager can call.
     *
     * @param _extension           New extension to add
     */
    function addExtension(address _extension) external upgradesPermitted onlyOperator {
        require(!isExtension[_extension], "Extension already exists");
        require(address(IExtension(_extension).manager()) == address(this), "Extension manager invalid");

        _addExtension(_extension);
    }

    /**
     * OPERATOR ONLY: Remove an existing extension tracked by the BaseManager.
     *
     * @param _extension           Old extension to remove
     */
    function removeExtension(address _extension) external onlyOperator {
        require(isExtension[_extension], "Extension does not exist");
        require(!_isAuthorizedExtension(_extension), "Extension used by protected module");

        extensions.removeStorage(_extension);

        isExtension[_extension] = false;

        emit ExtensionRemoved(_extension);
    }

    /**
     * MUTUAL UPGRADE: Authorizes an extension for a protected module. Operator and Methodologist must
     * each call this function to execute the update. Adds extension to manager if not already present.
     *
     * @param _module           Module to authorize extension for
     * @param _extension          Extension to authorize for module
     */
    function authorizeExtension(address _module, address _extension)
        external
        mutualUpgrade(operator, methodologist)
    {
        require(protectedModules[_module].isProtected, "Module not protected");
        require(!protectedModules[_module].authorizedExtensions[_extension], "Extension already authorized");

        _authorizeExtension(_module, _extension);

        emit ExtensionAuthorized(_module, _extension);
    }

    /**
     * MUTUAL UPGRADE: Revokes extension authorization for a protected module. Operator and Methodologist
     * must each call this function to execute the update. In order to remove the extension completely
     * from the contract removeExtension must be called by the operator.
     *
     * @param _module           Module to revoke extension authorization for
     * @param _extension          Extension to revoke authorization of
     */
    function revokeExtensionAuthorization(address _module, address _extension)
        external
        mutualUpgrade(operator, methodologist)
    {
        require(protectedModules[_module].isProtected, "Module not protected");
        require(isExtension[_extension], "Extension does not exist");
        require(protectedModules[_module].authorizedExtensions[_extension], "Extension not authorized");

        protectedModules[_module].authorizedExtensions[_extension] = false;
        protectedModules[_module].authorizedExtensionsList.removeStorage(_extension);

        emit ExtensionAuthorizationRevoked(_module, _extension);
    }

    /**
     * ADAPTER ONLY: Interact with a module registered on the SetToken. Manager initialization must
     * have been authorized by methodologist. Extension making this call must be authorized
     * to call module if module is protected.
     *
     * @param _module           Module to interact with
     * @param _data             Byte data of function to call in module
     */
    function interactManager(address _module, bytes memory _data) external onlyExtension {
        require(initialized, "Manager not initialized");
        require(_module != address(setToken), "Extensions cannot call SetToken");
        require(_senderAuthorizedForModule(_module, msg.sender), "Extension not authorized for module");

        // Invoke call to module, assume value will always be 0
        _module.functionCallWithValue(_data, 0);
    }

    /**
     * OPERATOR ONLY: Transfers _tokens held by the manager to _destination. Can be used to
     * recover anything sent here accidentally. In BaseManagerV2, extensions should
     * be the only contracts designated as `feeRecipient` in fee modules.
     *
     * @param _token           ERC20 token to send
     * @param _destination     Address receiving the tokens
     * @param _amount          Quantity of tokens to send
     */
    function transferTokens(address _token, address _destination, uint256 _amount) external onlyExtension {
        IERC20(_token).safeTransfer(_destination, _amount);
    }

    /**
     * OPERATOR ONLY: Add a new module to the SetToken.
     *
     * @param _module           New module to add
     */
    function addModule(address _module) external upgradesPermitted onlyOperator {
        setToken.addModule(_module);
    }

    /**
     * OPERATOR ONLY: Remove a new module from the SetToken. Any extensions associated with this
     * module need to be removed in separate transactions via removeExtension.
     *
     * @param _module           Module to remove
     */
    function removeModule(address _module) external onlyOperator {
        require(!protectedModules[_module].isProtected, "Module protected");
        setToken.removeModule(_module);
    }

    /**
     * OPERATOR ONLY: Marks a currently protected module as unprotected and deletes its authorized
     * extension registries. Removes module from the SetToken. Increments the `emergencies` counter,
     * prohibiting any operator-only module or extension additions until `emergencyReplaceProtectedModule`
     * is executed or `resolveEmergency` is called by the methodologist.
     *
     * Called by operator when a module must be removed immediately for security reasons and it's unsafe
     * to wait for a `mutualUpgrade` process to play out.
     *
     * NOTE: If removing a fee module, you can ensure all fees are distributed by calling distribute
     * on the module's de-authorized fee extension after this call.
     *
     * @param _module           Module to remove
     */
    function emergencyRemoveProtectedModule(address _module) external onlyOperator {
        _unProtectModule(_module);
        setToken.removeModule(_module);
        emergencies += 1;

        emit EmergencyRemovedProtectedModule(_module);
    }

    /**
     * OPERATOR ONLY: Marks an existing module as protected and authorizes extensions for
     * it, adding them if necessary. Adds module to the protected modules list
     *
     * The operator uses this when they're adding new features and want to assure the methodologist
     * they won't be unilaterally changed in the future. Cannot be called during an emergency because
     * methodologist needs to explicitly approve protection arrangements under those conditions.
     *
     * NOTE: If adding a fee extension while protecting a fee module, it's important to set the
     * module `feeRecipient` to the new extension's address (ideally before this call).
     *
     * @param  _module          Module to protect
     * @param  _extensions        Array of extensions to authorize for protected module
     */
    function protectModule(address _module, address[] memory _extensions)
        external
        upgradesPermitted
        onlyOperator
    {
        require(setToken.getModules().contains(_module), "Module not added yet");
        _protectModule(_module, _extensions);

        emit ModuleProtected(_module, _extensions);
    }

    /**
     * METHODOLOGIST ONLY: Marks a currently protected module as unprotected and deletes its authorized
     * extension registries. Removes old module from the protected modules list.
     *
     * Called by the methodologist when they want to cede control over a protected module without triggering
     * an emergency (for example, to remove it because its dead).
     *
     * @param  _module          Module to revoke protections for
     */
    function unProtectModule(address _module) external onlyMethodologist {
        _unProtectModule(_module);

        emit ModuleUnprotected(_module);
    }

    /**
     * MUTUAL UPGRADE: Replaces a protected module. Operator and Methodologist must each call this
     * function to execute the update.
     *
     * > Marks a currently protected module as unprotected
     * > Deletes its authorized extension registries.
     * > Removes old module from SetToken.
     * > Adds new module to SetToken.
     * > Marks `_newModule` as protected and authorizes new extensions for it.
     *
     * Used when methodologists wants to guarantee that an existing protection arrangement is replaced
     * with a suitable substitute (ex: upgrading a StreamingFeeSplitExtension).
     *
     * NOTE: If replacing a fee module, it's necessary to set the module `feeRecipient` to be
     * the new fee extension address after this call. Any fees remaining in the old module's
     * de-authorized extensions can be distributed by calling `distribute()` on the old extension.
     *
     * @param _oldModule        Module to remove
     * @param _newModule        Module to add in place of removed module
     * @param _newExtensions      Extensions to authorize for new module
     */
    function replaceProtectedModule(address _oldModule, address _newModule, address[] memory _newExtensions)
        external
        mutualUpgrade(operator, methodologist)
    {
        _unProtectModule(_oldModule);

        setToken.removeModule(_oldModule);
        setToken.addModule(_newModule);

        _protectModule(_newModule, _newExtensions);

        emit ReplacedProtectedModule(_oldModule, _newModule, _newExtensions);
    }

    /**
     * MUTUAL UPGRADE & EMERGENCY ONLY: Replaces a module the operator has removed with
     * `emergencyRemoveProtectedModule`. Operator and Methodologist must each call this function to
     *  execute the update.
     *
     * > Adds new module to SetToken.
     * > Marks `_newModule` as protected and authorizes new extensions for it.
     * > Adds `_newModule` to protectedModules list.
     * > Decrements the emergencies counter,
     *
     * Used when methodologist wants to guarantee that a protection arrangement which was
     * removed in an emergency is replaced with a suitable substitute. Operator's ability to add modules
     * or extensions is restored after invoking this method (if this is the only emergency.)
     *
     * NOTE: If replacing a fee module, it's necessary to set the module `feeRecipient` to be
     * the new fee extension address after this call. Any fees remaining in the old module's
     * de-authorized extensions can be distributed by calling `accrueFeesAndDistribute` on the old extension.
     *
     * @param _module          Module to add in place of removed module
     * @param _extensions      Array of extensions to authorize for replacement module
     */
    function emergencyReplaceProtectedModule(
        address _module,
        address[] memory _extensions
    )
        external
        mutualUpgrade(operator, methodologist)
        onlyEmergency
    {
        setToken.addModule(_module);
        _protectModule(_module, _extensions);

        emergencies -= 1;

        emit EmergencyReplacedProtectedModule(_module, _extensions);
    }

    /**
     * METHODOLOGIST ONLY & EMERGENCY ONLY: Decrements the emergencies counter.
     *
     * Allows a methodologist to exit a state of emergency without replacing a protected module that
     * was removed. This could happen if the module has no viable substitute or operator and methodologist
     * agree that restoring normal operations is the best way forward.
     */
    function resolveEmergency() external onlyMethodologist onlyEmergency {
        emergencies -= 1;

        emit EmergencyResolved();
    }

    /**
     * METHODOLOGIST ONLY: Update the methodologist address
     *
     * @param _newMethodologist           New methodologist address
     */
    function setMethodologist(address _newMethodologist) external onlyMethodologist {
        emit MethodologistChanged(methodologist, _newMethodologist);

        methodologist = _newMethodologist;
    }

    /**
     * OPERATOR ONLY: Update the operator address
     *
     * @param _newOperator           New operator address
     */
    function setOperator(address _newOperator) external onlyOperator {
        emit OperatorChanged(operator, _newOperator);

        operator = _newOperator;
    }

    /* ============ External Getters ============ */

    function getExtensions() external view returns(address[] memory) {
        return extensions;
    }

    function getAuthorizedExtensions(address _module) external view returns (address[] memory) {
        return protectedModules[_module].authorizedExtensionsList;
    }

    function isAuthorizedExtension(address _module, address _extension) external view returns (bool) {
        return protectedModules[_module].authorizedExtensions[_extension];
    }

    function getProtectedModules() external view returns (address[] memory) {
        return protectedModulesList;
    }

    /* ============ Internal ============ */


    /**
     * Add a new extension that the BaseManager can call.
     */
    function _addExtension(address _extension) internal {
        extensions.push(_extension);

        isExtension[_extension] = true;

        emit ExtensionAdded(_extension);
    }

    /**
     * Marks a currently protected module as unprotected and deletes it from authorized extension
     * registries. Removes module from the SetToken.
     */
    function _unProtectModule(address _module) internal {
        require(protectedModules[_module].isProtected, "Module not protected");

        // Clear mapping and array entries in struct before deleting mapping entry
        for (uint256 i = 0; i < protectedModules[_module].authorizedExtensionsList.length; i++) {
            address extension = protectedModules[_module].authorizedExtensionsList[i];
            protectedModules[_module].authorizedExtensions[extension] = false;
        }

        delete protectedModules[_module];

        protectedModulesList.removeStorage(_module);
    }

    /**
     * Adds new module to SetToken. Marks `_newModule` as protected and authorizes
     * new extensions for it. Adds `_newModule` module to protectedModules list.
     */
    function _protectModule(address _module, address[] memory _extensions) internal {
        require(!protectedModules[_module].isProtected, "Module already protected");

        protectedModules[_module].isProtected = true;
        protectedModulesList.push(_module);

        for (uint i = 0; i < _extensions.length; i++) {
            _authorizeExtension(_module, _extensions[i]);
        }
    }

    /**
     * Adds extension if not already added and marks extension as authorized for module
     */
    function _authorizeExtension(address _module, address _extension) internal {
        if (!isExtension[_extension]) {
            _addExtension(_extension);
        }

        protectedModules[_module].authorizedExtensions[_extension] = true;
        protectedModules[_module].authorizedExtensionsList.push(_extension);
    }

    /**
     * Searches the extension mappings of each protected modules to determine if an extension
     * is authorized by any of them. Authorized extensions cannot be unilaterally removed by
     * the operator.
     */
    function _isAuthorizedExtension(address _extension) internal view returns (bool) {
        for (uint256 i = 0; i < protectedModulesList.length; i++) {
            if (protectedModules[protectedModulesList[i]].authorizedExtensions[_extension]) {
                return true;
            }
        }

        return false;
    }

    /**
     * Checks if `_sender` (an extension) is allowed to call a module (which may be protected)
     */
    function _senderAuthorizedForModule(address _module, address _sender) internal view returns (bool) {
        if (protectedModules[_module].isProtected) {
            return protectedModules[_module].authorizedExtensions[_sender];
        }

        return true;
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { IBaseManager } from "./IBaseManager.sol";

interface IExtension {
    function manager() external view returns (IBaseManager);
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;

import { MutualUpgrade } from "../lib/MutualUpgrade.sol";


// Mock contract implementation of MutualUpgrade functions
contract MutualUpgradeMock is
    MutualUpgrade
{
    uint256 public testUint;
    address public owner;
    address public methodologist;

    constructor(address _owner, address _methodologist) public {
        owner = _owner;
        methodologist = _methodologist;
    }

    function testMutualUpgrade(
        uint256 _testUint
    )
        external
        mutualUpgrade(owner, methodologist)
    {
        testUint = _testUint;
    }
}

/*
    Copyright 2021 IndexCooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

import { BaseExtension } from "../lib/BaseExtension.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { IStreamingFeeModule } from "../interfaces/IStreamingFeeModule.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { TimeLockUpgrade } from "../lib/TimeLockUpgrade.sol";
import { MutualUpgrade } from "../lib/MutualUpgrade.sol";


/**
 * @title StreamingFeeSplitExtension
 * @author Set Protocol
 *
 * Smart contract manager extension that allows for splitting and setting streaming fees. Fee splits are updated by operator.
 * Any fee updates are timelocked.
 */
contract StreamingFeeSplitExtension is BaseExtension, TimeLockUpgrade, MutualUpgrade {
    using Address for address;
    using PreciseUnitMath for uint256;
    using SafeMath for uint256;

    /* ============ Events ============ */

    event FeesDistributed(
        address indexed _operatorFeeRecipient,
        address indexed _methodologist,
        uint256 _operatorTake,
        uint256 _methodologistTake
    );

    /* ============ State Variables ============ */

    ISetToken public setToken;
    IStreamingFeeModule public streamingFeeModule;

    // Percent of fees in precise units (10^16 = 1%) sent to operator, rest to methodologist
    uint256 public operatorFeeSplit;

    // Address which receives operator's share of fees when they're distributed. (See IIP-72)
    address public operatorFeeRecipient;

    /* ============ Constructor ============ */

    constructor(
        IBaseManager _manager,
        IStreamingFeeModule _streamingFeeModule,
        uint256 _operatorFeeSplit,
        address _operatorFeeRecipient
    )
        public
        BaseExtension(_manager)
    {
        streamingFeeModule = _streamingFeeModule;
        operatorFeeSplit = _operatorFeeSplit;
        operatorFeeRecipient = _operatorFeeRecipient;
        setToken = manager.setToken();
    }

    /* ============ External Functions ============ */

    /**
     * ANYONE CALLABLE: Accrues fees from streaming fee module. Gets resulting balance after fee accrual,
     * calculates fees for operator and methodologist, and sends to operatorFeeRecipient and methodologist
     * respectively.
     */
    function accrueFeesAndDistribute() public {
        // Emits a FeeActualized event
        streamingFeeModule.accrueFee(setToken);

        uint256 totalFees = setToken.balanceOf(address(this));

        address methodologist = manager.methodologist();

        uint256 operatorTake = totalFees.preciseMul(operatorFeeSplit);
        uint256 methodologistTake = totalFees.sub(operatorTake);

        if (operatorTake > 0) {
            setToken.transfer(operatorFeeRecipient, operatorTake);
        }

        if (methodologistTake > 0) {
            setToken.transfer(methodologist, methodologistTake);
        }

        emit FeesDistributed(operatorFeeRecipient, methodologist, operatorTake, methodologistTake);
    }

    /**
     * MUTUAL UPGRADE: Initializes the streaming fee module. Operator and Methodologist must each call
     * this function to execute the update.
     *
     * This method is called after invoking `replaceProtectedModule` or `emergencyReplaceProtectedModule`
     * to configure the replacement streaming fee module's fee settings.
     *
     * @dev FeeState settings encode the following struct
     * ```
     * struct FeeState {
     *   address feeRecipient;                // Address to accrue fees to
     *   uint256 maxStreamingFeePercentage;   // Max streaming fee maanager commits to using (1% = 1e16, 100% = 1e18)
     *   uint256 streamingFeePercentage;      // Percent of Set accruing to manager annually (1% = 1e16, 100% = 1e18)
     *   uint256 lastStreamingFeeTimestamp;   // Timestamp last streaming fee was accrued
     *}
     *```
     * @param _settings     FeeModule.FeeState settings
     */
    function initializeModule(IStreamingFeeModule.FeeState memory _settings)
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
    {
        bytes memory callData = abi.encodeWithSelector(
            IStreamingFeeModule.initialize.selector,
            manager.setToken(),
            _settings
        );

        invokeManager(address(streamingFeeModule), callData);
    }

    /**
     * MUTUAL UPGRADE: Updates streaming fee on StreamingFeeModule. Operator and Methodologist must
     * each call this function to execute the update. Because the method is timelocked, each party
     * must call it twice: once to set the lock and once to execute.
     *
     * Method is timelocked to protect token owners from sudden changes in fee structure which
     * they would rather not bear. The delay gives them a chance to exit their positions without penalty.
     *
     * NOTE: This will accrue streaming fees though not send to operator fee recipient and methodologist.
     *
     * @param _newFee       Percent of Set accruing to fee extension annually (1% = 1e16, 100% = 1e18)
     */
    function updateStreamingFee(uint256 _newFee)
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
        timeLockUpgrade
    {
        bytes memory callData = abi.encodeWithSelector(
            IStreamingFeeModule.updateStreamingFee.selector,
            manager.setToken(),
            _newFee
        );

        invokeManager(address(streamingFeeModule), callData);
    }

    /**
     * MUTUAL UPGRADE: Updates fee recipient on streaming fee module.
     *
     * @param _newFeeRecipient  Address of new fee recipient. This should be the address of the fee extension itself.
     */
    function updateFeeRecipient(address _newFeeRecipient)
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
    {
        bytes memory callData = abi.encodeWithSelector(
            IStreamingFeeModule.updateFeeRecipient.selector,
            manager.setToken(),
            _newFeeRecipient
        );

        invokeManager(address(streamingFeeModule), callData);
    }

    /**
     * MUTUAL UPGRADE: Updates fee split between operator and methodologist. Split defined in precise units (1% = 10^16).
     * Fees will be accrued and distributed before the new split goes into effect.
     *
     * @param _newFeeSplit      Percent of fees in precise units (10^16 = 1%) sent to operator, (rest go to the methodologist).
     */
    function updateFeeSplit(uint256 _newFeeSplit)
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
    {
        require(_newFeeSplit <= PreciseUnitMath.preciseUnit(), "Fee must be less than 100%");
        accrueFeesAndDistribute();
        operatorFeeSplit = _newFeeSplit;
    }

    /**
     * OPERATOR ONLY: Updates the address that receives the operator's share of the fees (see IIP-72)
     *
     * @param _newOperatorFeeRecipient  Address to send operator's fees to.
     */
    function updateOperatorFeeRecipient(address _newOperatorFeeRecipient)
        external
        onlyOperator
    {
        require(_newOperatorFeeRecipient != address(0), "Zero address not valid");
        operatorFeeRecipient = _newOperatorFeeRecipient;
    }
}

/*
    Copyright 2021 IndexCooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

import { BaseExtension } from "../lib/BaseExtension.sol";
import { IIssuanceModule } from "../interfaces/IIssuanceModule.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { IStreamingFeeModule } from "../interfaces/IStreamingFeeModule.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { TimeLockUpgrade } from "../lib/TimeLockUpgrade.sol";
import { MutualUpgrade } from "../lib/MutualUpgrade.sol";


/**
 * @title FeeSplitExtension
 * @author Set Protocol
 *
 * Smart contract extension that allows for splitting and setting streaming and mint/redeem fees.
 */
contract FeeSplitExtension is BaseExtension, TimeLockUpgrade, MutualUpgrade {
    using Address for address;
    using PreciseUnitMath for uint256;
    using SafeMath for uint256;

    /* ============ Events ============ */

    event FeesDistributed(
        address indexed _operatorFeeRecipient,
        address indexed _methodologist,
        uint256 _operatorTake,
        uint256 _methodologistTake
    );

    /* ============ State Variables ============ */

    ISetToken public setToken;
    IStreamingFeeModule public streamingFeeModule;
    IIssuanceModule public issuanceModule;

    // Percent of fees in precise units (10^16 = 1%) sent to operator, rest to methodologist
    uint256 public operatorFeeSplit;

    // Address which receives operator's share of fees when they're distributed. (See IIP-72)
    address public operatorFeeRecipient;

    /* ============ Constructor ============ */

    constructor(
        IBaseManager _manager,
        IStreamingFeeModule _streamingFeeModule,
        IIssuanceModule _issuanceModule,
        uint256 _operatorFeeSplit,
        address _operatorFeeRecipient
    )
        public
        BaseExtension(_manager)
    {
        streamingFeeModule = _streamingFeeModule;
        issuanceModule = _issuanceModule;
        operatorFeeSplit = _operatorFeeSplit;
        operatorFeeRecipient = _operatorFeeRecipient;
        setToken = manager.setToken();
    }

    /* ============ External Functions ============ */

    /**
     * ANYONE CALLABLE: Accrues fees from streaming fee module. Gets resulting balance after fee accrual, calculates fees for
     * operator and methodologist, and sends to operator fee recipient and methodologist respectively. NOTE: mint/redeem fees
     * will automatically be sent to this address so reading the balance of the SetToken in the contract after accrual is
     * sufficient for accounting for all collected fees.
     */
    function accrueFeesAndDistribute() public {
        // Emits a FeeActualized event
        streamingFeeModule.accrueFee(setToken);

        uint256 totalFees = setToken.balanceOf(address(this));

        address methodologist = manager.methodologist();

        uint256 operatorTake = totalFees.preciseMul(operatorFeeSplit);
        uint256 methodologistTake = totalFees.sub(operatorTake);

        if (operatorTake > 0) {
            setToken.transfer(operatorFeeRecipient, operatorTake);
        }

        if (methodologistTake > 0) {
            setToken.transfer(methodologist, methodologistTake);
        }

        emit FeesDistributed(operatorFeeRecipient, methodologist, operatorTake, methodologistTake);
    }

    /**
     * MUTUAL UPGRADE: Initializes the issuance module. Operator and Methodologist must each call
     * this function to execute the update.
     *
     * This method is called after invoking `replaceProtectedModule` or `emergencyReplaceProtectedModule`
     * to configure the replacement streaming fee module's fee settings.
     *
     * @param _maxManagerFee            Max size of issuance and redeem fees in precise units (10^16 = 1%).
     * @param _managerIssueFee          Manager issuance fees in precise units (10^16 = 1%)
     * @param _managerRedeemFee         Manager redeem fees in precise units (10^16 = 1%)
     * @param _feeRecipient             Address that receives all manager issue and redeem fees
     * @param _managerIssuanceHook      Address of manager defined hook contract
     */
    function initializeIssuanceModule(
        uint256 _maxManagerFee,
        uint256 _managerIssueFee,
        uint256 _managerRedeemFee,
        address _feeRecipient,
        address _managerIssuanceHook
    )
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
    {
        bytes memory callData = abi.encodeWithSelector(
            IIssuanceModule.initialize.selector,
            manager.setToken(),
            _maxManagerFee,
            _managerIssueFee,
            _managerRedeemFee,
            _feeRecipient,
            _managerIssuanceHook
        );

        invokeManager(address(issuanceModule), callData);
    }

    /**
     * MUTUAL UPGRADE: Initializes the issuance module. Operator and Methodologist must each call
     * this function to execute the update.
     *
     * This method is called after invoking `replaceProtectedModule` or `emergencyReplaceProtectedModule`
     * to configure the replacement streaming fee module's fee settings.
     *
     * @dev FeeState settings encode the following struct
     * ```
     * struct FeeState {
     *   address feeRecipient;                // Address to accrue fees to
     *   uint256 maxStreamingFeePercentage;   // Max streaming fee maanager commits to using (1% = 1e16, 100% = 1e18)
     *   uint256 streamingFeePercentage;      // Percent of Set accruing to manager annually (1% = 1e16, 100% = 1e18)
     *   uint256 lastStreamingFeeTimestamp;   // Timestamp last streaming fee was accrued
     *}
     *```
     * @param _settings     FeeModule.FeeState settings
     */
    function initializeStreamingFeeModule(IStreamingFeeModule.FeeState memory _settings)
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
    {
        bytes memory callData = abi.encodeWithSelector(
            IStreamingFeeModule.initialize.selector,
            manager.setToken(),
            _settings
        );

        invokeManager(address(streamingFeeModule), callData);
    }

    /**
     * MUTUAL UPGRADE: Updates streaming fee on StreamingFeeModule. Operator and Methodologist must each call
     * this function to execute the update. Because the method is timelocked, each party must call it twice:
     * once to set the lock and once to execute.
     *
     * Method is timelocked to protect token owners from sudden changes in fee structure which
     * they would rather not bear. The delay gives them a chance to exit their positions without penalty.
     *
     * NOTE: This will accrue streaming fees though not send to operator fee recipient and methodologist.
     *
     * @param _newFee       Percent of Set accruing to fee extension annually (1% = 1e16, 100% = 1e18)
     */
    function updateStreamingFee(uint256 _newFee)
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
        timeLockUpgrade
    {
        bytes memory callData = abi.encodeWithSignature("updateStreamingFee(address,uint256)", manager.setToken(), _newFee);
        invokeManager(address(streamingFeeModule), callData);
    }

    /**
     * MUTUAL UPGRADE: Updates issue fee on IssuanceModule. Only is executed once time lock has passed.
     * Operator and Methodologist must each call this function to execute the update. Because the method
     * is timelocked, each party must call it twice: once to set the lock and once to execute.
     *
     * Method is timelocked to protect token owners from sudden changes in fee structure which
     * they would rather not bear. The delay gives them a chance to exit their positions without penalty.
     *
     * @param _newFee           New issue fee percentage in precise units (1% = 1e16, 100% = 1e18)
     */
    function updateIssueFee(uint256 _newFee)
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
        timeLockUpgrade
    {
        bytes memory callData = abi.encodeWithSignature("updateIssueFee(address,uint256)", manager.setToken(), _newFee);
        invokeManager(address(issuanceModule), callData);
    }

    /**
     * MUTUAL UPGRADE: Updates redeem fee on IssuanceModule. Only is executed once time lock has passed.
     * Operator and Methodologist must each call this function to execute the update. Because the method is
     * timelocked, each party must call it twice: once to set the lock and once to execute.
     *
     * Method is timelocked to protect token owners from sudden changes in fee structure which
     * they would rather not bear. The delay gives them a chance to exit their positions without penalty.
     *
     * @param _newFee           New redeem fee percentage in precise units (1% = 1e16, 100% = 1e18)
     */
    function updateRedeemFee(uint256 _newFee)
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
        timeLockUpgrade
    {
        bytes memory callData = abi.encodeWithSignature("updateRedeemFee(address,uint256)", manager.setToken(), _newFee);
        invokeManager(address(issuanceModule), callData);
    }

    /**
     * MUTUAL UPGRADE: Updates fee recipient on both streaming fee and issuance modules.
     *
     * @param _newFeeRecipient  Address of new fee recipient. This should be the address of the fee extension itself.
     */
    function updateFeeRecipient(address _newFeeRecipient)
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
    {
        bytes memory callData = abi.encodeWithSignature("updateFeeRecipient(address,address)", manager.setToken(), _newFeeRecipient);
        invokeManager(address(streamingFeeModule), callData);
        invokeManager(address(issuanceModule), callData);
    }

    /**
     * MUTUAL UPGRADE: Updates fee split between operator and methodologist. Split defined in precise units (1% = 10^16).
     *
     * @param _newFeeSplit      Percent of fees in precise units (10^16 = 1%) sent to operator, (rest go to the methodologist).
     */
    function updateFeeSplit(uint256 _newFeeSplit)
        external
        mutualUpgrade(manager.operator(), manager.methodologist())
    {
        require(_newFeeSplit <= PreciseUnitMath.preciseUnit(), "Fee must be less than 100%");
        accrueFeesAndDistribute();
        operatorFeeSplit = _newFeeSplit;
    }

    /**
     * OPERATOR ONLY: Updates the address that receives the operator's share of the fees (see IIP-72)
     *
     * @param _newOperatorFeeRecipient  Address to send operator's fees to.
     */
    function updateOperatorFeeRecipient(address _newOperatorFeeRecipient)
        external
        onlyOperator
    {
        require(_newOperatorFeeRecipient != address(0), "Zero address not valid");
        operatorFeeRecipient = _newOperatorFeeRecipient;
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;

import { ISetToken } from "./ISetToken.sol";

/**
 * @title IDebtIssuanceModule
 * @author Set Protocol
 *
 * Interface for interacting with Debt Issuance module interface.
 */
interface IIssuanceModule {
    function updateIssueFee(ISetToken _setToken, uint256 _newIssueFee) external;
    function updateRedeemFee(ISetToken _setToken, uint256 _newRedeemFee) external;
    function updateFeeRecipient(ISetToken _setToken, address _newRedeemFee) external;

    function initialize(
        ISetToken _setToken,
        uint256 _maxManagerFee,
        uint256 _managerIssueFee,
        uint256 _managerRedeemFee,
        address _feeRecipient,
        address _managerIssuanceHook
    ) external;
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;


import { IBaseManager } from "../interfaces/IBaseManager.sol";
import { BaseExtension } from "../lib/BaseExtension.sol";

contract FlexibleLeverageStrategyExtensionMock is BaseExtension {

    /* ============ Enums ============ */

    enum ShouldRebalance {
        NONE,                   // Indicates no rebalance action can be taken
        REBALANCE,              // Indicates rebalance() function can be successfully called
        ITERATE_REBALANCE,      // Indicates iterateRebalance() function can be successfully called
        RIPCORD                 // Indicates ripcord() function can be successfully called
    }

    /* ============ State Variables ============ */
    uint256 public currentLeverageRatio;             // The current leverage ratio
    string public exchangeName;                      // The exchange name

    /* ============ Events ============ */
    event RebalanceEvent(ShouldRebalance _rebalance);    // A rebalance occurred

    /**
     * Instantiate addresses, methodology parameters, execution parameters, and incentive parameters.
     *
     * @param _manager                  Address of IBaseManager contract
     */
    constructor(IBaseManager _manager, uint256 _currentLeverageRatio, string memory _exchangeName) public BaseExtension(_manager) {
        currentLeverageRatio = _currentLeverageRatio;
        exchangeName = _exchangeName;
    }

    /**
     * Helper that checks if conditions are met for rebalance or ripcord. Returns an enum with 0 = no rebalance, 1 = call rebalance(), 2 = call iterateRebalance()
     * 3 = call ripcord()
     *
     * @return (string[] memory, ShouldRebalance[] memory)      List of exchange names and a list of enums representing whether that exchange should rebalance
     */
    function shouldRebalance() external view returns (string[] memory, ShouldRebalance[] memory) {
        return _shouldRebalance(); 
    }

    function shouldRebalanceWithBounds(uint256 _customMinLeverageRatio, uint256 _customMaxLeverageRatio) external view returns (string[] memory, ShouldRebalance[] memory) {
        return _shouldRebalance();
    }

    /**
     * @param _exchangeName     the exchange used for trading
     */
    function rebalance(string memory _exchangeName) external onlyAllowedCaller(msg.sender) {
        require(keccak256(abi.encodePacked(_exchangeName)) == keccak256(abi.encodePacked(exchangeName)), "Exchange names are not equal");
        emit RebalanceEvent(ShouldRebalance.REBALANCE);
    }

    /**
     * @param _exchangeName     the exchange used for trading
     */
    function iterateRebalance(string memory _exchangeName) external onlyAllowedCaller(msg.sender) {
        require(keccak256(abi.encodePacked(_exchangeName)) == keccak256(abi.encodePacked(exchangeName)), "Exchange names are not equal");
        emit RebalanceEvent(ShouldRebalance.ITERATE_REBALANCE);
    }

    /**
     *
     * @param _exchangeName     the exchange used for trading
     */
    function ripcord(string memory _exchangeName) external { 
        require(keccak256(abi.encodePacked(_exchangeName)) == keccak256(abi.encodePacked(exchangeName)), "Exchange names are not equal");
        emit RebalanceEvent(ShouldRebalance.RIPCORD);
    }

    function _shouldRebalance() private view returns (string[] memory, ShouldRebalance[] memory) {
        ShouldRebalance rebalanceStrategy = ShouldRebalance.NONE;
        if (currentLeverageRatio == 1) {
            rebalanceStrategy = ShouldRebalance.REBALANCE;
        } else if (currentLeverageRatio == 2) {
            rebalanceStrategy = ShouldRebalance.ITERATE_REBALANCE;
        } else if (currentLeverageRatio == 3) {
            rebalanceStrategy = ShouldRebalance.RIPCORD;
        }
        string[] memory exchangeNames = new string[](1);
        exchangeNames[0] = exchangeName;

        ShouldRebalance[] memory shouldRebalances = new ShouldRebalance[](1);
        shouldRebalances[0] = rebalanceStrategy;
        return (exchangeNames, shouldRebalances);
    }
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { BaseExtension } from "../lib/BaseExtension.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";

contract BaseExtensionMock is BaseExtension {

    constructor(IBaseManager _manager) public BaseExtension(_manager) {}

    /* ============ External Functions ============ */

    function testInvokeManagerTransfer(address _token, address _destination, uint256 _amount) external {
        invokeManagerTransfer(_token, _destination, _amount);
    }

    function testInvokeManager(address _module, bytes calldata _encoded) external {
        invokeManager(_module, _encoded);
    }

    function testOnlyOperator()
        external
        onlyOperator
    {}

    function testOnlyMethodologist()
        external
        onlyMethodologist
    {}

    function testOnlyEOA()
        external
        onlyEOA
    {}

    function testOnlyAllowedCaller(address _caller)
        external
        onlyAllowedCaller(_caller)
    {}

    function interactManager(address _target, bytes calldata _data) external {
        invokeManager(_target, _data);
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";

import { AddressArrayUtils } from "../lib/AddressArrayUtils.sol";
import { IAdapter } from "../interfaces/IAdapter.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";


/**
 * @title BaseManager
 * @author Set Protocol
 *
 * Smart contract manager that contains permissions and admin functionality
 */
contract BaseManager {
    using Address for address;
    using AddressArrayUtils for address[];

    /* ============ Events ============ */

    event AdapterAdded(
        address _adapter
    );

    event AdapterRemoved(
        address _adapter
    );

    event MethodologistChanged(
        address _oldMethodologist,
        address _newMethodologist
    );

    event OperatorChanged(
        address _oldOperator,
        address _newOperator
    );

    /* ============ Modifiers ============ */

    /**
     * Throws if the sender is not the SetToken operator
     */
    modifier onlyOperator() {
        require(msg.sender == operator, "Must be operator");
        _;
    }

    /**
     * Throws if the sender is not the SetToken methodologist
     */
    modifier onlyMethodologist() {
        require(msg.sender == methodologist, "Must be methodologist");
        _;
    }

    /**
     * Throws if the sender is not a listed adapter
     */
    modifier onlyAdapter() {
        require(isAdapter[msg.sender], "Must be adapter");
        _;
    }

    /* ============ State Variables ============ */

    // Instance of SetToken
    ISetToken public setToken;

    // Array of listed adapters
    address[] internal adapters;

    // Mapping to check if adapter is added
    mapping(address => bool) public isAdapter;

    // Address of operator which typically executes manager only functions on Set Protocol modules
    address public operator;

    // Address of methodologist which serves as providing methodology for the index
    address public methodologist;

    /* ============ Constructor ============ */

    constructor(
        ISetToken _setToken,
        address _operator,
        address _methodologist
    )
        public
    {
        setToken = _setToken;
        operator = _operator;
        methodologist = _methodologist;
    }

    /* ============ External Functions ============ */

    /**
     * MUTUAL UPGRADE: Update the SetToken manager address. Operator and Methodologist must each call
     * this function to execute the update.
     *
     * @param _newManager           New manager address
     */
    function setManager(address _newManager) external onlyOperator {
        require(_newManager != address(0), "Zero address not valid");
        setToken.setManager(_newManager);
    }

    /**
     * MUTUAL UPGRADE: Add a new adapter that the BaseManager can call.
     *
     * @param _adapter           New adapter to add
     */
    function addAdapter(address _adapter) external onlyOperator {
        require(!isAdapter[_adapter], "Adapter already exists");
        require(address(IAdapter(_adapter).manager()) == address(this), "Adapter manager invalid");

        adapters.push(_adapter);

        isAdapter[_adapter] = true;

        emit AdapterAdded(_adapter);
    }

    /**
     * MUTUAL UPGRADE: Remove an existing adapter tracked by the BaseManager.
     *
     * @param _adapter           Old adapter to remove
     */
    function removeAdapter(address _adapter) external onlyOperator {
        require(isAdapter[_adapter], "Adapter does not exist");

        adapters.removeStorage(_adapter);

        isAdapter[_adapter] = false;

        emit AdapterRemoved(_adapter);
    }

    /**
     * ADAPTER ONLY: Interact with a module registered on the SetToken.
     *
     * @param _module           Module to interact with
     * @param _data             Byte data of function to call in module
     */
    function interactManager(address _module, bytes calldata _data) external onlyAdapter {
        // Invoke call to module, assume value will always be 0
        _module.functionCallWithValue(_data, 0);
    }

    /**
     * OPERATOR ONLY: Add a new module to the SetToken.
     *
     * @param _module           New module to add
     */
    function addModule(address _module) external onlyOperator {
        setToken.addModule(_module);
    }

    /**
     * OPERATOR ONLY: Remove a new module from the SetToken.
     *
     * @param _module           Module to remove
     */
    function removeModule(address _module) external onlyOperator {
        setToken.removeModule(_module);
    }

    /**
     * METHODOLOGIST ONLY: Update the methodologist address
     *
     * @param _newMethodologist           New methodologist address
     */
    function setMethodologist(address _newMethodologist) external onlyMethodologist {
        emit MethodologistChanged(methodologist, _newMethodologist);

        methodologist = _newMethodologist;
    }

    /**
     * OPERATOR ONLY: Update the operator address
     *
     * @param _newOperator           New operator address
     */
    function setOperator(address _newOperator) external onlyOperator {
        emit OperatorChanged(operator, _newOperator);

        operator = _newOperator;
    }

    /* ============ External Getters ============ */

    function getAdapters() external view returns(address[] memory) {
        return adapters;
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { IBaseManager } from "./IBaseManager.sol";

interface IAdapter {
    function manager() external view returns (IBaseManager);
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { AddressArrayUtils } from "../lib/AddressArrayUtils.sol";

import { IManagerIssuanceHook } from "../interfaces/IManagerIssuanceHook.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";


/**
 * @title SupplyCapAllowedCallerIssuanceHook
 * @author Set Protocol
 *
 * Issuance hook that checks
 * 1) New issuances won't push SetToken totalSupply over supply cap
 * 2) A contract address is allowed to call the module. This does not apply if caller is an EOA
 */
contract SupplyCapAllowedCallerIssuanceHook is Ownable, IManagerIssuanceHook {
    using SafeMath for uint256;
    using AddressArrayUtils for address[];

    /* ============ Events ============ */

    event SupplyCapUpdated(uint256 _newCap);
    event CallerStatusUpdated(address indexed _caller, bool _status);
    event AnyoneCallableUpdated(bool indexed _status);

    /* ============ State Variables ============ */

    // Cap on totalSupply of Sets
    uint256 public supplyCap;

    // Boolean indicating if anyone can call function
    bool public anyoneCallable;

    // Mapping of contract addresses allowed to call function
    mapping(address => bool) public callAllowList;

    /* ============ Constructor ============ */

    /**
     * Constructor, overwrites owner and original supply cap.
     *
     * @param _initialOwner      Owner address, overwrites Ownable logic which sets to deployer as default
     * @param _supplyCap         Supply cap for Set (in wei of Set)
     */
    constructor(
        address _initialOwner,
        uint256 _supplyCap
    )
        public
    {
        supplyCap = _supplyCap;

        // Overwrite _owner param of Ownable contract
        transferOwnership(_initialOwner);
    }

    /* ============ External Functions ============ */

    /**
     * Adheres to IManagerIssuanceHook interface, and checks to make sure the current issue call won't push total supply over cap.
     */
    function invokePreIssueHook(
        ISetToken _setToken,
        uint256 _issueQuantity,
        address _sender,
        address /*_to*/
    )
        external
        override
    {
        _validateAllowedContractCaller(_sender);

        uint256 totalSupply = _setToken.totalSupply();
        require(totalSupply.add(_issueQuantity) <= supplyCap, "Supply cap exceeded");
    }

    /**
     * Adheres to IManagerIssuanceHook interface
     */
    function invokePreRedeemHook(
        ISetToken _setToken,
        uint256 _redeemQuantity,
        address _sender,
        address _to
    )
        external
        override
    {}

    /**
     * ONLY OWNER: Updates supply cap
     */
    function updateSupplyCap(uint256 _newCap) external onlyOwner {
        supplyCap = _newCap;
        SupplyCapUpdated(_newCap);
    }

    /**
     * ONLY OWNER: Toggle ability for passed addresses to call only allowed caller functions
     *
     * @param _callers           Array of caller addresses to toggle status
     * @param _statuses          Array of statuses for each caller
     */
    function updateCallerStatus(address[] calldata _callers, bool[] calldata _statuses) external onlyOwner {
        _callers.validatePairsWithArray(_statuses);

        for (uint256 i = 0; i < _callers.length; i++) {
            address caller = _callers[i];
            bool status = _statuses[i];
            callAllowList[caller] = status;
            emit CallerStatusUpdated(caller, status);
        }
    }

    /**
     * ONLY OWNER: Toggle whether anyone can call function, bypassing the callAllowlist
     *
     * @param _status           Boolean indicating whether to allow anyone call
     */
    function updateAnyoneCallable(bool _status) external onlyOwner {
        anyoneCallable = _status;
        emit AnyoneCallableUpdated(_status);
    }

    /* ============ Internal Functions ============ */

    /**
     * Validate if passed address is allowed to call function. If anyoneCallable is set to true, anyone can call otherwise needs to be an EOA or
     * approved contract address.
     */
    function _validateAllowedContractCaller(address _caller) internal view {
        require(
            _caller == tx.origin || anyoneCallable || callAllowList[_caller],
            "Contract not permitted to call"
        );
    }
}

/*
    Copyright 2020 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;

interface IIntegrationRegistry {
  function addIntegration(
    address _module,
    string memory _id,
    address _wrapper
  ) external;

  function getIntegrationAdapter(address _module, string memory _id)
    external
    view
    returns (address);

  function getIntegrationAdapterWithHash(address _module, bytes32 _id)
    external
    view
    returns (address);

  function isValidIntegration(address _module, string memory _id) external view returns (bool);
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;

/**
 * @title IWrapV2Adapter
 * @author Set Protocol
 */
interface IWrapV2Adapter {
  function ETH_TOKEN_ADDRESS() external view returns (address);

  function getWrapCallData(
    address _underlyingToken,
    address _wrappedToken,
    uint256 _underlyingUnits,
    address _to,
    bytes memory _wrapData
  )
    external
    view
    returns (
      address _subject,
      uint256 _value,
      bytes memory _calldata
    );

  function getUnwrapCallData(
    address _underlyingToken,
    address _wrappedToken,
    uint256 _wrappedTokenUnits,
    address _to,
    bytes memory _unwrapData
  )
    external
    view
    returns (
      address _subject,
      uint256 _value,
      bytes memory _calldata
    );

  function getSpenderAddress(address _underlyingToken, address _wrappedToken)
    external
    view
    returns (address);
}

/*
    Copyright 2021 Index Coop.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

import { ISetToken } from "./ISetToken.sol";

pragma solidity 0.6.10;

interface IWrapModuleV2 {

    function initialize(ISetToken _setToken) external;

    function wrap(
        ISetToken _setToken,
        address _underlyingToken,
        address _wrappedToken,
        uint256 _underlyingUnits,
        string calldata _integrationName,
        bytes memory _wrapData
    ) external;

    function wrapWithEther(
        ISetToken _setToken,
        address _wrappedToken,
        uint256 _underlyingUnits,
        string calldata _integrationName,
        bytes memory _wrapData
    ) external;

    function unwrap(
        ISetToken _setToken,
        address _underlyingToken,
        address _wrappedToken,
        uint256 _wrappedUnits,
        string calldata _integrationName,
        bytes memory _unwrapData
    ) external;

    function unwrapWithEther(
        ISetToken _setToken,
        address _wrappedToken,
        uint256 _wrappedUnits,
        string calldata _integrationName,
        bytes memory _unwrapData
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;

library console {
	address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);

	function _sendLogPayload(bytes memory payload) private view {
		uint256 payloadLength = payload.length;
		address consoleAddress = CONSOLE_ADDRESS;
		assembly {
			let payloadStart := add(payload, 32)
			let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
		}
	}

	function log() internal view {
		_sendLogPayload(abi.encodeWithSignature("log()"));
	}

	function logInt(int256 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(int256)", p0));
	}

	function logUint(uint256 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256)", p0));
	}

	function logString(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function logBool(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function logAddress(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function logBytes(bytes memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
	}

	function logBytes1(bytes1 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
	}

	function logBytes2(bytes2 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
	}

	function logBytes3(bytes3 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
	}

	function logBytes4(bytes4 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
	}

	function logBytes5(bytes5 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
	}

	function logBytes6(bytes6 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
	}

	function logBytes7(bytes7 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
	}

	function logBytes8(bytes8 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
	}

	function logBytes9(bytes9 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
	}

	function logBytes10(bytes10 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
	}

	function logBytes11(bytes11 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
	}

	function logBytes12(bytes12 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
	}

	function logBytes13(bytes13 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
	}

	function logBytes14(bytes14 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
	}

	function logBytes15(bytes15 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
	}

	function logBytes16(bytes16 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
	}

	function logBytes17(bytes17 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
	}

	function logBytes18(bytes18 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
	}

	function logBytes19(bytes19 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
	}

	function logBytes20(bytes20 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
	}

	function logBytes21(bytes21 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
	}

	function logBytes22(bytes22 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
	}

	function logBytes23(bytes23 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
	}

	function logBytes24(bytes24 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
	}

	function logBytes25(bytes25 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
	}

	function logBytes26(bytes26 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
	}

	function logBytes27(bytes27 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
	}

	function logBytes28(bytes28 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
	}

	function logBytes29(bytes29 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
	}

	function logBytes30(bytes30 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
	}

	function logBytes31(bytes31 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
	}

	function logBytes32(bytes32 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
	}

	function log(uint256 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256)", p0));
	}

	function log(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function log(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function log(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function log(uint256 p0, uint256 p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256)", p0, p1));
	}

	function log(uint256 p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string)", p0, p1));
	}

	function log(uint256 p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool)", p0, p1));
	}

	function log(uint256 p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address)", p0, p1));
	}

	function log(string memory p0, uint256 p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256)", p0, p1));
	}

	function log(string memory p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
	}

	function log(string memory p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
	}

	function log(string memory p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
	}

	function log(bool p0, uint256 p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256)", p0, p1));
	}

	function log(bool p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
	}

	function log(bool p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
	}

	function log(bool p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
	}

	function log(address p0, uint256 p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256)", p0, p1));
	}

	function log(address p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
	}

	function log(address p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
	}

	function log(address p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
	}

	function log(uint256 p0, uint256 p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256)", p0, p1, p2));
	}

	function log(uint256 p0, uint256 p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string)", p0, p1, p2));
	}

	function log(uint256 p0, uint256 p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool)", p0, p1, p2));
	}

	function log(uint256 p0, uint256 p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address)", p0, p1, p2));
	}

	function log(uint256 p0, string memory p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256)", p0, p1, p2));
	}

	function log(uint256 p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string)", p0, p1, p2));
	}

	function log(uint256 p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool)", p0, p1, p2));
	}

	function log(uint256 p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address)", p0, p1, p2));
	}

	function log(uint256 p0, bool p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256)", p0, p1, p2));
	}

	function log(uint256 p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string)", p0, p1, p2));
	}

	function log(uint256 p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool)", p0, p1, p2));
	}

	function log(uint256 p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address)", p0, p1, p2));
	}

	function log(uint256 p0, address p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256)", p0, p1, p2));
	}

	function log(uint256 p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string)", p0, p1, p2));
	}

	function log(uint256 p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool)", p0, p1, p2));
	}

	function log(uint256 p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address)", p0, p1, p2));
	}

	function log(string memory p0, uint256 p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256)", p0, p1, p2));
	}

	function log(string memory p0, uint256 p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string)", p0, p1, p2));
	}

	function log(string memory p0, uint256 p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool)", p0, p1, p2));
	}

	function log(string memory p0, uint256 p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
	}

	function log(string memory p0, address p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256)", p0, p1, p2));
	}

	function log(string memory p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
	}

	function log(string memory p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
	}

	function log(string memory p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
	}

	function log(bool p0, uint256 p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256)", p0, p1, p2));
	}

	function log(bool p0, uint256 p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string)", p0, p1, p2));
	}

	function log(bool p0, uint256 p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool)", p0, p1, p2));
	}

	function log(bool p0, uint256 p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
	}

	function log(bool p0, bool p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256)", p0, p1, p2));
	}

	function log(bool p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
	}

	function log(bool p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
	}

	function log(bool p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
	}

	function log(bool p0, address p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256)", p0, p1, p2));
	}

	function log(bool p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
	}

	function log(bool p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
	}

	function log(bool p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
	}

	function log(address p0, uint256 p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256)", p0, p1, p2));
	}

	function log(address p0, uint256 p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string)", p0, p1, p2));
	}

	function log(address p0, uint256 p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool)", p0, p1, p2));
	}

	function log(address p0, uint256 p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address)", p0, p1, p2));
	}

	function log(address p0, string memory p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256)", p0, p1, p2));
	}

	function log(address p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
	}

	function log(address p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
	}

	function log(address p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
	}

	function log(address p0, bool p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256)", p0, p1, p2));
	}

	function log(address p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
	}

	function log(address p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
	}

	function log(address p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
	}

	function log(address p0, address p1, uint256 p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256)", p0, p1, p2));
	}

	function log(address p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
	}

	function log(address p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
	}

	function log(address p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
	}

	function log(uint256 p0, uint256 p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,uint256,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,string,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,bool,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, uint256 p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,uint256,address,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,uint256,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,string,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,bool,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,string,address,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,uint256,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,string,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,bool,address,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,uint256,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,string,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,bool,address)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,uint256)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,string)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,bool)", p0, p1, p2, p3));
	}

	function log(uint256 p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint256,address,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,uint256,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint256 p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint256,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint256,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint256,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint256,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint256)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,uint256,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint256 p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint256,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint256,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint256,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint256,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint256)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,uint256,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint256 p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint256,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint256,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint256,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint256 p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint256 p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint256 p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint256 p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint256,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, uint256 p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint256)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
	}

}

/*
    Copyright 2022 Index Cooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { Math } from "@openzeppelin/contracts/math/Math.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import { IAToken } from "../interfaces/IAToken.sol";
import { IAaveLeverageModule } from "../interfaces/IAaveLeverageModule.sol";
import { IDebtIssuanceModule } from "../interfaces/IDebtIssuanceModule.sol";
import { IController } from "../interfaces/IController.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { IWETH } from "../interfaces/IWETH.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { UniSushiV2Library } from "../../external/contracts/UniSushiV2Library.sol";
import { FlashLoanReceiverBaseV2 } from "../../external/contracts/aaveV2/FlashLoanReceiverBaseV2.sol";
import { DEXAdapter } from "./DEXAdapter.sol";


/**
 * @title ExchangeIssuance
 * @author Index Coop
 *
 * Contract for issuing and redeeming a leveraged Set Token
 * Supports all tokens with one collateral Position in the form of an AToken and one debt position
 * Both the collateral as well as the debt token have to be available for flashloand and be 
 * tradeable against each other on Sushi / Quickswap
 */
contract ExchangeIssuanceLeveraged is ReentrancyGuard, FlashLoanReceiverBaseV2{

    using DEXAdapter for DEXAdapter.Addresses;
    using Address for address payable;
    using SafeMath for uint256;
    using PreciseUnitMath for uint256;
    using SafeERC20 for IERC20;
    using SafeERC20 for ISetToken;

    /* ============ Structs ============ */

    struct LeveragedTokenData {
        address collateralAToken;
        address collateralToken;
        uint256 collateralAmount;
        address debtToken;
        uint256 debtAmount;
    }

    struct DecodedParams {
        ISetToken setToken;
        uint256 setAmount;
        address originalSender;
        bool isIssuance;
        address paymentToken;
        uint256 limitAmount;
        LeveragedTokenData leveragedTokenData;
        DEXAdapter.SwapData collateralAndDebtSwapData;
        DEXAdapter.SwapData paymentTokenSwapData;
    }

    /* ============ Constants ============= */

    uint256 constant private MAX_UINT256 = type(uint256).max;
    uint256 public constant ROUNDING_ERROR_MARGIN = 2;

    /* ============ State Variables ============ */

    IController public immutable setController;
    IDebtIssuanceModule public immutable debtIssuanceModule;
    IAaveLeverageModule public immutable aaveLeverageModule;
    DEXAdapter.Addresses public addresses;

    /* ============ Events ============ */

    event ExchangeIssue(
        address indexed _recipient,     // The recipient address of the issued SetTokens
        ISetToken indexed _setToken,    // The issued SetToken
        address indexed _inputToken,    // The address of the input asset(ERC20/ETH) used to issue the SetTokens
        uint256 _amountInputToken,      // The amount of input tokens used for issuance
        uint256 _amountSetIssued        // The amount of SetTokens received by the recipient
    );

    event ExchangeRedeem(
        address indexed _recipient,     // The recipient address which redeemed the SetTokens
        ISetToken indexed _setToken,    // The redeemed SetToken
        address indexed _outputToken,   // The address of output asset(ERC20/ETH) received by the recipient
        uint256 _amountSetRedeemed,     // The amount of SetTokens redeemed for output tokens
        uint256 _amountOutputToken      // The amount of output tokens received by the recipient
    );

    /* ============ Modifiers ============ */

    modifier onlyLendingPool() {
         require(msg.sender == address(LENDING_POOL), "ExchangeIssuance: LENDING POOL ONLY");
         _;
    }

    modifier isValidPath(
        address[] memory _path,
        address _inputToken,
        address _outputToken
    )
    {
        if(_inputToken != _outputToken){
            require(
                _path[0] == _inputToken || (_inputToken == addresses.weth && _path[0] == DEXAdapter.ETH_ADDRESS),
                "ExchangeIssuance: INPUT_TOKEN_NOT_IN_PATH"
            );
            require(
                _path[_path.length-1] == _outputToken ||
                (_outputToken == addresses.weth && _path[_path.length-1] == DEXAdapter.ETH_ADDRESS),
                "ExchangeIssuance: OUTPUT_TOKEN_NOT_IN_PATH"
            );
        }
        _;
    }


    /* ============ Constructor ============ */

    /**
    * Sets various contract addresses 
    * 
    * @param _weth                  Address of wrapped native token
    * @param _quickRouter           Address of quickswap router
    * @param _sushiRouter           Address of sushiswap router
    * @param _uniV3Router           Address of uniswap v3 router
    * @param _uniV3Quoter           Address of uniswap v3 quoter
    * @param _setController         SetToken controller used to verify a given token is a set
    * @param _debtIssuanceModule    DebtIssuanceModule used to issue and redeem tokens
    * @param _aaveLeverageModule    AaveLeverageModule to sync before every issuance / redemption
    * @param _aaveAddressProvider   Address of address provider for aaves addresses
    * @param _curveAddressProvider  Contract to get current implementation address of curve registry
    * @param _curveCalculator       Contract to calculate required input to receive given output in curve (for exact output swaps)
    */
    constructor(
        address _weth,
        address _quickRouter,
        address _sushiRouter,
        address _uniV3Router,
        address _uniV3Quoter,
        IController _setController,
        IDebtIssuanceModule _debtIssuanceModule,
        IAaveLeverageModule _aaveLeverageModule,
        address _aaveAddressProvider,
        address _curveAddressProvider,
        address _curveCalculator
    )
        public
        FlashLoanReceiverBaseV2(_aaveAddressProvider)
    {
        setController = _setController;
        debtIssuanceModule = _debtIssuanceModule;
        aaveLeverageModule = _aaveLeverageModule;

        addresses.weth = _weth;
        addresses.quickRouter = _quickRouter;
        addresses.sushiRouter = _sushiRouter;
        addresses.uniV3Router = _uniV3Router;
        addresses.uniV3Quoter = _uniV3Quoter;
        addresses.curveAddressProvider = _curveAddressProvider;
        addresses.curveCalculator = _curveCalculator;
    }

    /* ============ External Functions ============ */

    /**
     * Returns the collateral / debt token addresses and amounts for a leveraged index 
     *
     * @param _setToken              Address of the SetToken to be issued / redeemed
     * @param _setAmount             Amount of SetTokens to issue / redeem
     * @param _isIssuance            Boolean indicating if the SetToken is to be issued or redeemed
     *
     * @return Struct containing the collateral / debt token addresses and amounts
     */
    function getLeveragedTokenData(
        ISetToken _setToken,
        uint256 _setAmount,
        bool _isIssuance
    )
        external 
        view
        returns (LeveragedTokenData memory)
    {
        return _getLeveragedTokenData(_setToken, _setAmount, _isIssuance);
    }

    /**
     * Runs all the necessary approval functions required for a given ERC20 token.
     * This function can be called when a new token is added to a SetToken during a
     * rebalance.
     *
     * @param _token    Address of the token which needs approval
     */
    function approveToken(IERC20 _token) external {
        _approveToken(_token);
    }

    /**
     * Gets the input cost of issuing a given amount of a set token. This
     * function is not marked view, but should be static called from frontends.
     * This constraint is due to the need to interact with the Uniswap V3 quoter
     * contract and call sync on AaveLeverageModule. Note: If the two SwapData
     * paths contain the same tokens, there will be a slight error introduced
     * in the result.
     *
     * @param _setToken                     the set token to issue
     * @param _setAmount                    amount of set tokens
     * @param _swapDataDebtForCollateral    swap data for the debt to collateral swap
     * @param _swapDataInputToken           swap data for the input token to collateral swap
     *
     * @return                              the amount of input tokens required to perfrom the issuance
     */
    function getIssueExactSet(
        ISetToken _setToken,
        uint256 _setAmount,
        DEXAdapter.SwapData memory _swapDataDebtForCollateral,
        DEXAdapter.SwapData memory _swapDataInputToken
    )
        external
        returns (uint256)
    {
        aaveLeverageModule.sync(_setToken);
        LeveragedTokenData memory issueInfo = _getLeveragedTokenData(_setToken, _setAmount, true);        
        uint256 collateralOwed = issueInfo.collateralAmount.preciseMul(1.0009 ether);
        uint256 borrowSaleProceeds = DEXAdapter.getAmountOut(addresses, _swapDataDebtForCollateral, issueInfo.debtAmount);
        collateralOwed = collateralOwed.sub(borrowSaleProceeds);
        return DEXAdapter.getAmountIn(addresses, _swapDataInputToken, collateralOwed);
    }

    /**
     * Gets the proceeds of a redemption of a given amount of a set token. This
     * function is not marked view, but should be static called from frontends.
     * This constraint is due to the need to interact with the Uniswap V3 quoter
     * contract and call sync on AaveLeverageModule. Note: If the two SwapData
     * paths contain the same tokens, there will be a slight error introduced
     * in the result.
     *
     * @param _setToken                     the set token to issue
     * @param _setAmount                    amount of set tokens
     * @param _swapDataCollateralForDebt    swap data for the collateral to debt swap
     * @param _swapDataOutputToken          swap data for the collateral token to the output token
     *
     * @return                              amount of _outputToken that would be obtained from the redemption
     */
    function getRedeemExactSet(
        ISetToken _setToken,
        uint256 _setAmount,
        DEXAdapter.SwapData memory _swapDataCollateralForDebt,
        DEXAdapter.SwapData memory _swapDataOutputToken
    )
        external
        returns (uint256)
    {
        aaveLeverageModule.sync(_setToken);
        LeveragedTokenData memory redeemInfo = _getLeveragedTokenData(_setToken, _setAmount, false);
        uint256 debtOwed = redeemInfo.debtAmount.preciseMul(1.0009 ether);
        uint256 debtPurchaseCost = DEXAdapter.getAmountIn(addresses, _swapDataCollateralForDebt, debtOwed);
        uint256 extraCollateral = redeemInfo.collateralAmount.sub(debtPurchaseCost);
        return DEXAdapter.getAmountOut(addresses, _swapDataOutputToken, extraCollateral);
    }

    /**
     * Trigger redemption of set token to pay the user with Eth
     *
     * @param _setToken                   Set token to redeem
     * @param _setAmount                  Amount to redeem
     * @param _minAmountOutputToken       Minimum amount of ETH to send to the user
     * @param _swapDataCollateralForDebt  Data (token path and fee levels) describing the swap from Collateral Token to Debt Token
     * @param _swapDataOutputToken        Data (token path and fee levels) describing the swap from Collateral Token to Eth
     */
    function redeemExactSetForETH(
        ISetToken _setToken,
        uint256 _setAmount,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapDataCollateralForDebt,
        DEXAdapter.SwapData memory _swapDataOutputToken
    )
        external
        nonReentrant
    {
        _initiateRedemption(
            _setToken,
            _setAmount,
            DEXAdapter.ETH_ADDRESS,
            _minAmountOutputToken,
            _swapDataCollateralForDebt,
            _swapDataOutputToken
        );
    }

    /**
     * Trigger redemption of set token to pay the user with an arbitrary ERC20 
     *
     * @param _setToken                   Set token to redeem
     * @param _setAmount                  Amount to redeem
     * @param _outputToken                Address of the ERC20 token to send to the user
     * @param _minAmountOutputToken       Minimum amount of output token to send to the user
     * @param _swapDataCollateralForDebt  Data (token path and fee levels) describing the swap from Collateral Token to Debt Token
     * @param _swapDataOutputToken        Data (token path and fee levels) describing the swap from Collateral Token to Output token
     */
    function redeemExactSetForERC20(
        ISetToken _setToken,
        uint256 _setAmount,
        address _outputToken,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapDataCollateralForDebt,
        DEXAdapter.SwapData memory _swapDataOutputToken
    )
        external
        nonReentrant
    {
        _initiateRedemption(
            _setToken,
            _setAmount,
            _outputToken,
            _minAmountOutputToken,
            _swapDataCollateralForDebt,
            _swapDataOutputToken
        );
    }

    /**
     * Trigger issuance of set token paying with any arbitrary ERC20 token
     *
     * @param _setToken                     Set token to issue
     * @param _setAmount                    Amount to issue
     * @param _inputToken                   Input token to pay with
     * @param _maxAmountInputToken          Maximum amount of input token to spend
     * @param _swapDataDebtForCollateral    Data (token addresses and fee levels) to describe the swap path from Debt to collateral token
     * @param _swapDataInputToken           Data (token addresses and fee levels) to describe the swap path from input to collateral token
     */
    function issueExactSetFromERC20(
        ISetToken _setToken,
        uint256 _setAmount,
        address _inputToken,
        uint256 _maxAmountInputToken,
        DEXAdapter.SwapData memory _swapDataDebtForCollateral,
        DEXAdapter.SwapData memory _swapDataInputToken
    )
        external
        nonReentrant
    {
        _initiateIssuance(
            _setToken,
            _setAmount,
            _inputToken,
            _maxAmountInputToken,
            _swapDataDebtForCollateral,
            _swapDataInputToken
        );
    }

    /**
     * Trigger issuance of set token paying with Eth
     *
     * @param _setToken                     Set token to issue
     * @param _setAmount                    Amount to issue
     * @param _swapDataDebtForCollateral    Data (token addresses and fee levels) to describe the swap path from Debt to collateral token
     * @param _swapDataInputToken           Data (token addresses and fee levels) to describe the swap path from eth to collateral token
     */
    function issueExactSetFromETH(
        ISetToken _setToken,
        uint256 _setAmount,
        DEXAdapter.SwapData memory _swapDataDebtForCollateral,
        DEXAdapter.SwapData memory _swapDataInputToken
    )
        external
        payable
        nonReentrant
    {
        _initiateIssuance(
            _setToken,
            _setAmount,
            DEXAdapter.ETH_ADDRESS,
            msg.value,
            _swapDataDebtForCollateral,
            _swapDataInputToken
        );
    }

    /**
     * This is the callback function that will be called by the AaveLending Pool after flashloaned tokens have been sent
     * to this contract.
     * After exiting this function the Lending Pool will attempt to transfer back the loaned tokens + interest. If it fails to do so
     * the whole transaction gets reverted
     *
     * @param assets     Addresses of all assets that were borrowed
     * @param amounts    Amounts that were borrowed
     * @param premiums   Interest to be paid on top of borrowed amount
     * @param initiator  Address that initiated the flashloan
     * @param params     Encoded bytestring of other parameters from the original contract call to be used downstream
     * 
     * @return Boolean indicating success of the operation (fixed to true otherwise the whole transaction would be reverted by lending pool)
     */
    function executeOperation(
        address[] memory assets,
        uint256[] memory amounts,
        uint256[] memory premiums,
        address initiator, 
        bytes memory params
    )
        external
        override 
        onlyLendingPool
        returns (bool)
    {
        require(initiator == address(this), "ExchangeIssuance: INVALID FLASHLOAN INITIATOR");
        require(assets.length == 1, "ExchangeIssuance: TOO MANY ASSETS");
        require(amounts.length == 1, "ExchangeIssuance: TOO MANY AMOUNTS");
        require(premiums.length == 1, "ExchangeIssuance: TOO MANY PREMIUMS");

        DecodedParams memory decodedParams = abi.decode(params, (DecodedParams));

        if(decodedParams.isIssuance){
            _performIssuance(assets[0], amounts[0], premiums[0], decodedParams);
        } else {
            _performRedemption(assets[0], amounts[0], premiums[0], decodedParams);
        }

        return true;
    }

    /**
     * Runs all the necessary approval functions required for a list of ERC20 tokens.
     *
     * @param _tokens    Addresses of the tokens which need approval
     */
    function approveTokens(IERC20[] memory _tokens) external {
        for (uint256 i = 0; i < _tokens.length; i++) {
            _approveToken(_tokens[i]);
        }
    }

    /**
     * Runs all the necessary approval functions required before issuing
     * or redeeming a SetToken. This function need to be called only once before the first time
     * this smart contract is used on any particular SetToken.
     *
     * @param _setToken    Address of the SetToken being initialized
     */
    function approveSetToken(ISetToken _setToken) external {
        LeveragedTokenData memory leveragedTokenData = _getLeveragedTokenData(_setToken, 1 ether, true);

        _approveToken(IERC20(leveragedTokenData.collateralAToken));
        _approveTokenToLendingPool(IERC20(leveragedTokenData.collateralToken));

        _approveToken(IERC20(leveragedTokenData.debtToken));
        _approveTokenToLendingPool(IERC20(leveragedTokenData.debtToken));
    }

    /* ============ Internal Functions ============ */

    /**
     * Performs all the necessary steps for issuance using the collateral tokens obtained in the flashloan
     *
     * @param _collateralToken            Address of the underlying collateral token that was loaned
     * @param _collateralTokenAmountNet   Amount of collateral token that was received as flashloan
     * @param _premium                    Premium / Interest that has to be returned to the lending pool on top of the loaned amount
     * @param _decodedParams              Struct containing token addresses / amounts to perform issuance
     */
    function _performIssuance(
        address _collateralToken,
        uint256 _collateralTokenAmountNet,
        uint256 _premium,
        DecodedParams memory _decodedParams
    ) 
    internal 
    {
        // Deposit collateral token obtained from flashloan to get the respective aToken position required for issuance
        _depositCollateralToken(_collateralToken, _collateralTokenAmountNet);

        // Issue set using the aToken returned by deposit step
        _issueSet(_decodedParams.setToken, _decodedParams.setAmount, _decodedParams.originalSender);
        // Obtain necessary collateral tokens to repay flashloan 
        uint amountInputTokenSpent = _obtainCollateralTokens(
            _collateralToken,
            _collateralTokenAmountNet + _premium,
            _decodedParams
        );
        require(amountInputTokenSpent <= _decodedParams.limitAmount, "ExchangeIssuance: INSUFFICIENT INPUT AMOUNT");
    }

    /**
     * Performs all the necessary steps for redemption using the debt tokens obtained in the flashloan
     *
     * @param _debtToken           Address of the debt token that was loaned
     * @param _debtTokenAmountNet  Amount of debt token that was received as flashloan
     * @param _premium             Premium / Interest that has to be returned to the lending pool on top of the loaned amount
     * @param _decodedParams       Struct containing token addresses / amounts to perform redemption
     */
    function _performRedemption(
        address _debtToken,
        uint256 _debtTokenAmountNet,
        uint256 _premium,
        DecodedParams memory _decodedParams
    ) 
    internal 
    {
        // Redeem set using debt tokens obtained from flashloan
        _redeemSet(
            _decodedParams.setToken,
            _decodedParams.setAmount,
            _decodedParams.originalSender
        );
        // Withdraw underlying collateral token from the aToken position returned by redeem step
        _withdrawCollateralToken(
            _decodedParams.leveragedTokenData.collateralToken,
            _decodedParams.leveragedTokenData.collateralAmount - ROUNDING_ERROR_MARGIN
        );
        // Obtain debt tokens required to repay flashloan by swapping the underlying collateral tokens obtained in withdraw step
        uint256 collateralTokenSpent = _swapCollateralForDebtToken(
            _debtTokenAmountNet + _premium,
            _debtToken,
            _decodedParams.leveragedTokenData.collateralAmount,
            _decodedParams.leveragedTokenData.collateralToken,
            _decodedParams.collateralAndDebtSwapData
        );
        // Liquidate remaining collateral tokens for the payment token specified by user
        uint256 amountOutputToken = _liquidateCollateralTokens(
            collateralTokenSpent,
            _decodedParams.setToken,
            _decodedParams.setAmount,
            _decodedParams.originalSender,
            _decodedParams.paymentToken,
            _decodedParams.limitAmount,
            _decodedParams.leveragedTokenData.collateralToken,
            _decodedParams.leveragedTokenData.collateralAmount  - 2*ROUNDING_ERROR_MARGIN,
            _decodedParams.paymentTokenSwapData
        );
        require(amountOutputToken >= _decodedParams.limitAmount, "ExchangeIssuance: INSUFFICIENT OUTPUT AMOUNT");
    }


    /**
    * Returns the collateral / debt token addresses and amounts for a leveraged index 
    *
    * @param _setToken              Address of the SetToken to be issued / redeemed
    * @param _setAmount             Amount of SetTokens to issue / redeem
    * @param _isIssuance            Boolean indicating if the SetToken is to be issued or redeemed
    *
    * @return Struct containing the collateral / debt token addresses and amounts
    */
    function _getLeveragedTokenData(
        ISetToken _setToken,
        uint256 _setAmount,
        bool _isIssuance
    )
        internal 
        view
        returns (LeveragedTokenData memory)
    {
        address[] memory components;
        uint256[] memory equityPositions;
        uint256[] memory debtPositions;


        if(_isIssuance){
            (components, equityPositions, debtPositions) = debtIssuanceModule.getRequiredComponentIssuanceUnits(_setToken, _setAmount);
        } else {
            (components, equityPositions, debtPositions) = debtIssuanceModule.getRequiredComponentRedemptionUnits(_setToken, _setAmount);
        }

        require(components.length == 2, "ExchangeIssuance: TOO MANY COMPONENTS");
        require(equityPositions[0] == 0 || equityPositions[1] == 0, "ExchangeIssuance: TOO MANY EQUITY POSITIONS");
        require(debtPositions[0] == 0 || debtPositions[1] == 0, "ExchangeIssuance: TOO MANY DEBT POSITIONS");

        if(equityPositions[0] > 0){
            return LeveragedTokenData(
                components[0],
                IAToken(components[0]).UNDERLYING_ASSET_ADDRESS(),
                equityPositions[0] + ROUNDING_ERROR_MARGIN,
                components[1],
                debtPositions[1]
            );
        } else {
            return LeveragedTokenData(
                components[1],
                IAToken(components[1]).UNDERLYING_ASSET_ADDRESS(),
                equityPositions[1] + ROUNDING_ERROR_MARGIN,
                components[0],
                debtPositions[0]
            );
        }
    }



    /**
     * Approves max amount of given token to all exchange routers and the debt issuance module
     *
     * @param _token  Address of the token to be approved
     */
    function _approveToken(IERC20 _token) internal {
        _safeApprove(_token, address(debtIssuanceModule), MAX_UINT256);
    }

    /**
     * Initiates a flashloan call with the correct parameters for issuing set tokens in the callback
     * Borrows correct amount of collateral token and and forwards encoded memory to controll issuance in the callback.
     *
     * @param _setToken                     Address of the SetToken being initialized
     * @param _setAmount                    Amount of the SetToken being initialized
     * @param _inputToken                   Address of the input token to pay with
     * @param _maxAmountInputToken          Maximum amount of input token to pay
     * @param _swapDataDebtForCollateral    Data (token addresses and fee levels) to describe the swap path from Debt to collateral token
     * @param _swapDataInputToken           Data (token addresses and fee levels) to describe the swap path from input to collateral token
     */
    function _initiateIssuance(
        ISetToken _setToken,
        uint256 _setAmount,
        address _inputToken,
        uint256 _maxAmountInputToken,
        DEXAdapter.SwapData memory _swapDataDebtForCollateral,
        DEXAdapter.SwapData memory _swapDataInputToken
    )
        internal
    {
        aaveLeverageModule.sync(_setToken);
        LeveragedTokenData memory leveragedTokenData = _getLeveragedTokenData(_setToken, _setAmount, true);

        address[] memory assets = new address[](1);
        assets[0] = leveragedTokenData.collateralToken;
        uint[] memory amounts =  new uint[](1);
        amounts[0] = leveragedTokenData.collateralAmount;

        bytes memory params = abi.encode(
            DecodedParams(
                _setToken,
                _setAmount,
                msg.sender,
                true,
                _inputToken,
                _maxAmountInputToken,
                leveragedTokenData,
                _swapDataDebtForCollateral,
                _swapDataInputToken
           )
        );

        _flashloan(assets, amounts, params);

    }

    /**
     * Initiates a flashloan call with the correct parameters for redeeming set tokens in the callback
     *
     * @param _setToken                   Address of the SetToken to redeem
     * @param _setAmount                  Amount of the SetToken to redeem
     * @param _outputToken                Address of token to return to the user
     * @param _minAmountOutputToken       Minimum amount of output token to receive
     * @param _swapDataCollateralForDebt  Data (token path and fee levels) describing the swap from Collateral Token to Debt Token
     * @param _swapDataOutputToken        Data (token path and fee levels) describing the swap from Collateral Token to Output token
     */
    function _initiateRedemption(
        ISetToken _setToken,
        uint256 _setAmount,
        address  _outputToken,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapDataCollateralForDebt,
        DEXAdapter.SwapData memory _swapDataOutputToken
    )
        internal
    {
        aaveLeverageModule.sync(_setToken);
        LeveragedTokenData memory leveragedTokenData = _getLeveragedTokenData(_setToken, _setAmount, false);

        address[] memory assets = new address[](1);
        assets[0] = leveragedTokenData.debtToken;
        uint[] memory amounts =  new uint[](1);
        amounts[0] = leveragedTokenData.debtAmount;

        bytes memory params = abi.encode(
            DecodedParams(
                _setToken,
                _setAmount,
                msg.sender,
                false,
                _outputToken,
                _minAmountOutputToken,
                leveragedTokenData,
                _swapDataCollateralForDebt,
                _swapDataOutputToken
            )
        );

        _flashloan(assets, amounts, params);

    }

    /**
     * Gets rid of the obtained collateral tokens from redemption by either sending them to the user
     * directly or converting them to the payment token and sending those out.
     *
     * @param _collateralTokenSpent    Amount of collateral token spent to obtain the debt token required for redemption
     * @param _setToken                Address of the SetToken to be issued
     * @param _setAmount               Amount of SetTokens to issue
     * @param _originalSender          Address of the user who initiated the redemption
     * @param _outputToken             Address of token to return to the user
     * @param _collateralToken         Address of the collateral token to sell
     * @param _collateralAmount        Amount of collateral token to sell
     * @param _minAmountOutputToken    Minimum amount of output token to return to the user
     * @param _swapData                Struct containing path and fee data for swap
     *
     * @return Amount of output token returned to the user
     */
    function _liquidateCollateralTokens(
        uint256 _collateralTokenSpent,
        ISetToken _setToken,
        uint256 _setAmount,
        address _originalSender,
        address _outputToken,
        uint256 _minAmountOutputToken,
        address _collateralToken,
        uint256 _collateralAmount,
        DEXAdapter.SwapData memory _swapData
    )
        internal
        returns (uint256)
    {
        require(_collateralAmount >= _collateralTokenSpent, "ExchangeIssuance: OVERSPENT COLLATERAL TOKEN");
        uint256 amountToReturn = _collateralAmount.sub(_collateralTokenSpent);
        uint256 outputAmount;
        if(_outputToken == DEXAdapter.ETH_ADDRESS){
            outputAmount = _liquidateCollateralTokensForETH(
                _collateralToken,
                amountToReturn,
                _originalSender,
                _minAmountOutputToken,
                _swapData
            );
        } else {
            outputAmount = _liquidateCollateralTokensForERC20(
                _collateralToken,
                amountToReturn,
                _originalSender,
                IERC20(_outputToken),
                _minAmountOutputToken,
                _swapData
            );
        }
        emit ExchangeRedeem(_originalSender, _setToken, _outputToken, _setAmount, outputAmount);
        return outputAmount;
    }

    /**
     * Returns the collateralToken directly to the user
     *
     * @param _collateralToken       Address of the the collateral token
     * @param _collateralRemaining   Amount of the collateral token remaining after buying required debt tokens
     * @param _originalSender        Address of the original sender to return the tokens to
     */
    function _returnCollateralTokensToSender(
        address _collateralToken,
        uint256 _collateralRemaining,
        address _originalSender
    )
        internal
    {
        IERC20(_collateralToken).transfer(_originalSender, _collateralRemaining);
    }

    /**
     * Sells the collateral tokens for the selected output ERC20 and returns that to the user
     *
     * @param _collateralToken       Address of the collateral token
     * @param _collateralRemaining   Amount of the collateral token remaining after buying required debt tokens
     * @param _originalSender        Address of the original sender to return the tokens to
     * @param _outputToken           Address of token to return to the user
     * @param _minAmountOutputToken  Minimum amount of output token to return to the user
     * @param _swapData              Data (token path and fee levels) describing the swap path from Collateral Token to Output token
     *
     * @return Amount of output token returned to the user
     */
    function _liquidateCollateralTokensForERC20(
        address _collateralToken,
        uint256 _collateralRemaining,
        address _originalSender,
        IERC20 _outputToken,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapData
    )
        internal
        returns (uint256)
    {
        if(address(_outputToken) == _collateralToken){
            _returnCollateralTokensToSender(_collateralToken, _collateralRemaining, _originalSender);
            return _collateralRemaining;
        }
        uint256 outputTokenAmount = _swapCollateralForOutputToken(
            _collateralToken,
            _collateralRemaining,
            address(_outputToken),
            _minAmountOutputToken,
            _swapData
        );
        _outputToken.transfer(_originalSender, outputTokenAmount);
        return outputTokenAmount;
    }

    /**
     * Sells the remaining collateral tokens for weth, withdraws that and returns native eth to the user
     *
     * @param _collateralToken            Address of the collateral token
     * @param _collateralRemaining        Amount of the collateral token remaining after buying required debt tokens
     * @param _originalSender             Address of the original sender to return the eth to
     * @param _minAmountOutputToken       Minimum amount of output token to return to user
     * @param _swapData                   Data (token path and fee levels) describing the swap path from Collateral Token to eth
     *
     * @return Amount of eth returned to the user
     */
    function _liquidateCollateralTokensForETH(
        address _collateralToken,
        uint256 _collateralRemaining,
        address _originalSender,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapData
    )
        internal
        isValidPath(_swapData.path, _collateralToken, addresses.weth)
        returns(uint256)
    {
        uint256 ethAmount = _swapCollateralForOutputToken(
            _collateralToken,
            _collateralRemaining,
            addresses.weth,
            _minAmountOutputToken,
            _swapData
        );
        if (ethAmount > 0) {
            IWETH(addresses.weth).withdraw(ethAmount);
            (payable(_originalSender)).sendValue(ethAmount);
        }
        return ethAmount;
    }

    /**
     * Obtains the tokens necessary to return the flashloan by swapping the debt tokens obtained
     * from issuance and making up the shortfall using the users funds.
     *
     * @param _collateralToken       collateral token to obtain
     * @param _amountRequired        Amount of collateralToken required to repay the flashloan
     * @param _decodedParams         Struct containing decoded data from original call passed through via flashloan
     *
     * @return Amount of input token spent
     */
    function _obtainCollateralTokens(
        address _collateralToken,
        uint256 _amountRequired,
        DecodedParams memory _decodedParams
    )
        internal
        returns (uint256)
    {
        uint collateralTokenObtained =  _swapDebtForCollateralToken(
            _collateralToken,
            _decodedParams.leveragedTokenData.debtToken,
            _decodedParams.leveragedTokenData.debtAmount,
            _decodedParams.collateralAndDebtSwapData
        );

        uint collateralTokenShortfall = _amountRequired.sub(collateralTokenObtained) + ROUNDING_ERROR_MARGIN;
        uint amountInputToken;

        if(_decodedParams.paymentToken == DEXAdapter.ETH_ADDRESS){
            amountInputToken = _makeUpShortfallWithETH(
                _collateralToken,
                collateralTokenShortfall,
                _decodedParams.originalSender,
                _decodedParams.limitAmount,
                _decodedParams.paymentTokenSwapData
            );
        } else {
            amountInputToken = _makeUpShortfallWithERC20(
                _collateralToken,
                collateralTokenShortfall,
                _decodedParams.originalSender,
                IERC20(_decodedParams.paymentToken),
                _decodedParams.limitAmount,
                _decodedParams.paymentTokenSwapData
            );
        }
        emit ExchangeIssue(
            _decodedParams.originalSender,
            _decodedParams.setToken,
            _decodedParams.paymentToken,
            amountInputToken,
            _decodedParams.setAmount
        );
        return amountInputToken;
    }

    /**
     * Issues set token using the previously obtained collateral token
     * Results in debt token being returned to the contract
     *
     * @param _setToken         Address of the SetToken to be issued
     * @param _setAmount        Amount of SetTokens to issue
     * @param _originalSender   Adress that initiated the token issuance, which will receive the set tokens
     */
    function _issueSet(ISetToken _setToken, uint256 _setAmount, address _originalSender) internal {
        debtIssuanceModule.issue(_setToken, _setAmount, _originalSender);
    }

    /**
     * Redeems set token using the previously obtained debt token
     * Results in collateral token being returned to the contract
     *
     * @param _setToken         Address of the SetToken to be redeemed
     * @param _setAmount        Amount of SetTokens to redeem
     * @param _originalSender   Adress that initiated the token redemption which is the source of the set tokens to be redeemed
     */
    function _redeemSet(ISetToken _setToken, uint256 _setAmount, address _originalSender) internal {
        _setToken.safeTransferFrom(_originalSender, address(this), _setAmount);
        debtIssuanceModule.redeem(_setToken, _setAmount, address(this));
    }

    /**
     * Transfers the shortfall between the amount of tokens required to return flashloan and what was obtained
     * from swapping the debt tokens from the users address
     *
     * @param _token                 Address of the token to transfer from user
     * @param _shortfall             Collateral token shortfall required to return the flashloan
     * @param _originalSender        Adress that initiated the token issuance, which is the adresss form which to transfer the tokens
     */
    function _transferShortfallFromSender(
        address _token,
        uint256 _shortfall,
        address _originalSender
    )
        internal
    {
        if(_shortfall>0){ 
            IERC20(_token).safeTransferFrom(_originalSender, address(this), _shortfall);
        }
    }

    /**
     * Makes up the collateral token shortfall with user specified ERC20 token
     *
     * @param _collateralToken             Address of the collateral token
     * @param _collateralTokenShortfall    Shortfall of collateral token that was not covered by selling the debt tokens
     * @param _originalSender              Address of the original sender to return the tokens to
     * @param _inputToken                  Input token to pay with
     * @param _maxAmountInputToken         Maximum amount of input token to spend
     *
     * @return Amount of input token spent
     */
    function _makeUpShortfallWithERC20(
        address _collateralToken,
        uint256 _collateralTokenShortfall,
        address _originalSender,
        IERC20 _inputToken,
        uint256 _maxAmountInputToken,
        DEXAdapter.SwapData memory _swapData
    )
        internal
        returns (uint256)
    {
        if(address(_inputToken) == _collateralToken){
            _transferShortfallFromSender(_collateralToken, _collateralTokenShortfall, _originalSender);
            return _collateralTokenShortfall;
        } else {
            _inputToken.transferFrom(_originalSender, address(this), _maxAmountInputToken);
            uint256 amountInputToken = _swapInputForCollateralToken(
                _collateralToken,
                _collateralTokenShortfall,
                address(_inputToken),
                _maxAmountInputToken,
                _swapData
            );
            if(amountInputToken < _maxAmountInputToken){
                _inputToken.transfer(_originalSender, _maxAmountInputToken.sub(amountInputToken));
            }
            return amountInputToken;
        }
    }

    /**
     * Makes up the collateral token shortfall with native eth
     *
     * @param _collateralToken             Address of the collateral token
     * @param _collateralTokenShortfall    Shortfall of collateral token that was not covered by selling the debt tokens
     * @param _originalSender              Address of the original sender to return the tokens to
     * @param _maxAmountEth                Maximum amount of eth to pay
     *
     * @return Amount of eth spent
     */
    function _makeUpShortfallWithETH(
        address _collateralToken,
        uint256 _collateralTokenShortfall,
        address _originalSender,
        uint256 _maxAmountEth,
        DEXAdapter.SwapData memory _swapData

    )
        internal
        returns(uint256)
    {
        IWETH(addresses.weth).deposit{value: _maxAmountEth}();

        uint256 amountEth = _swapInputForCollateralToken(
            _collateralToken,
            _collateralTokenShortfall,
            addresses.weth,
            _maxAmountEth,
            _swapData
        );

        if(_maxAmountEth > amountEth){
            uint256 amountEthReturn = _maxAmountEth.sub(amountEth);
            IWETH(addresses.weth).withdraw(amountEthReturn);
            (payable(_originalSender)).sendValue(amountEthReturn);
        }
        return amountEth;
    }

    /**
     * Swaps the debt tokens obtained from issuance for the collateral
     *
     * @param _collateralToken            Address of the collateral token buy
     * @param _debtToken                  Address of the debt token to sell
     * @param _debtAmount                 Amount of debt token to sell
     * @param _swapData                   Struct containing path and fee data for swap
     *
     * @return Amount of collateral token obtained
     */
    function _swapDebtForCollateralToken(
        address _collateralToken,
        address _debtToken,
        uint256 _debtAmount,
        DEXAdapter.SwapData memory _swapData
    )
        internal
        isValidPath(_swapData.path, _debtToken, _collateralToken)
        returns (uint256)
    {
        return addresses.swapExactTokensForTokens(
            _debtAmount,
            // minAmountOut is 0 here since we are going to make up the shortfall with the input token.
            // Sandwich protection is provided by the check at the end against _maxAmountInputToken parameter specified by the user
            0, 
            _swapData
        );
    }

    /**
     * Acquires debt tokens needed for flashloan repayment by swapping a portion of the collateral tokens obtained from redemption
     *
     * @param _debtAmount             Amount of debt token to buy
     * @param _debtToken              Address of debt token
     * @param _collateralAmount       Amount of collateral token available to spend / used as maxAmountIn parameter
     * @param _collateralToken        Address of collateral token
     * @param _swapData               Struct containing path and fee data for swap
     *
     * @return Amount of collateral token spent
     */
    function _swapCollateralForDebtToken(
        uint256 _debtAmount,
        address _debtToken,
        uint256 _collateralAmount,
        address _collateralToken,
        DEXAdapter.SwapData memory _swapData
    )
        internal
        isValidPath(_swapData.path, _collateralToken, _debtToken)
        returns (uint256)
    {
        return addresses.swapTokensForExactTokens(
            _debtAmount,
            _collateralAmount,
            _swapData
        );
    }

    /**
     * Acquires the required amount of collateral tokens by swapping the input tokens
     * Does nothing if collateral and input token are indentical
     *
     * @param _collateralToken       Address of collateral token
     * @param _amountRequired        Remaining amount of collateral token required to repay flashloan, after having swapped debt tokens for collateral
     * @param _inputToken            Address of input token to swap
     * @param _maxAmountInputToken   Maximum amount of input token to spend
     * @param _swapData              Data (token addresses and fee levels) describing the swap path
     *
     * @return Amount of input token spent
     */
    function _swapInputForCollateralToken(
        address _collateralToken,
        uint256 _amountRequired,
        address _inputToken,
        uint256 _maxAmountInputToken,
        DEXAdapter.SwapData memory _swapData
    )
        internal
        isValidPath(
            _swapData.path,
            _inputToken,
            _collateralToken
        )
        returns (uint256)
    {
        if(_collateralToken == _inputToken) return _amountRequired;
        return addresses.swapTokensForExactTokens(
            _amountRequired,
            _maxAmountInputToken,
            _swapData
        );
    }


    /**
     * Swaps the collateral tokens obtained from redemption for the selected output token
     * If both tokens are the same, does nothing
     *
     * @param _collateralToken        Address of collateral token
     * @param _collateralTokenAmount  Amount of colalteral token to swap
     * @param _outputToken            Address of the ERC20 token to swap into
     * @param _minAmountOutputToken   Minimum amount of output token to return to the user
     * @param _swapData               Data (token addresses and fee levels) describing the swap path
     *
     * @return Amount of output token obtained
     */
    function _swapCollateralForOutputToken(
        address _collateralToken,
        uint256 _collateralTokenAmount,
        address _outputToken,
        uint256 _minAmountOutputToken,
        DEXAdapter.SwapData memory _swapData
    )
        internal
        isValidPath(_swapData.path, _collateralToken, _outputToken)
        returns (uint256)
    {
        return addresses.swapExactTokensForTokens(
            _collateralTokenAmount,
            _minAmountOutputToken,
            _swapData
        );
    }



    /**
     * Deposit collateral to aave to obtain collateralAToken for issuance
     *
     * @param _collateralToken              Address of collateral token
     * @param _depositAmount                Amount to deposit
     */
    function _depositCollateralToken(
        address _collateralToken,
        uint256 _depositAmount
    ) internal {
        LENDING_POOL.deposit(_collateralToken, _depositAmount, address(this), 0);
    }

    /**
     * Convert collateralAToken from set redemption to collateralToken by withdrawing underlying from Aave
     *
     * @param _collateralToken       Address of the collateralToken to withdraw from Aave lending pool
     * @param _collateralAmount      Amount of collateralToken to withdraw
     */
    function _withdrawCollateralToken(
        address _collateralToken,
        uint256 _collateralAmount
    ) internal {
        LENDING_POOL.withdraw(_collateralToken, _collateralAmount, address(this));
    }

    /**
     * Sets a max approval limit for an ERC20 token, provided the current allowance
     * is less than the required allownce.
     *
     * @param _token              Token to approve
     * @param _spender            Spender address to approve
     * @param _requiredAllowance  Target allowance to set
     */
    function _safeApprove(
        IERC20 _token,
        address _spender,
        uint256 _requiredAllowance
    )
        internal
    {
        uint256 allowance = _token.allowance(address(this), _spender);
        if (allowance < _requiredAllowance) {
            _token.safeIncreaseAllowance(_spender, MAX_UINT256 - allowance);
        }
    }

    /**
     * Approves max amount of token to lending pool
     *
     * @param _token              Address of the token to approve
     */
    function _approveTokenToLendingPool(
        IERC20 _token
    )
    internal
    {
        uint256 allowance = _token.allowance(address(this), address(LENDING_POOL));
        if (allowance > 0) {
            _token.approve(address(LENDING_POOL), 0);
        }
        _token.approve(address(LENDING_POOL), MAX_UINT256);
    }

    /**
     * Triggers the flashloan from the Lending Pool
     *
     * @param assets         Addresses of tokens to loan 
     * @param amounts        Amounts to loan
     * @param params         Encoded memory to forward to the executeOperation method
     */
    function _flashloan(
        address[] memory assets,
        uint256[] memory amounts,
        bytes memory params
    )
    internal
    {
        address receiverAddress = address(this);
        address onBehalfOf = address(this);
        uint16 referralCode = 0;
        uint256[] memory modes = new uint256[](assets.length);

        // 0 = no debt (flash), 1 = stable, 2 = variable
        for (uint256 i = 0; i < assets.length; i++) {
            modes[i] = 0;
        }

        LENDING_POOL.flashLoan(
            receiverAddress,
            assets,
            amounts,
            modes,
            onBehalfOf,
            params,
            referralCode
        );
    }

    /**
     * Redeems a given amount of SetToken.
     *
     * @param _setToken     Address of the SetToken to be redeemed
     * @param _amount       Amount of SetToken to be redeemed
     */
    function _redeemExactSet(ISetToken _setToken, uint256 _amount) internal returns (uint256) {
        _setToken.safeTransferFrom(msg.sender, address(this), _amount);
        debtIssuanceModule.redeem(_setToken, _amount, address(this));
    }

}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
import { ISetToken } from "./ISetToken.sol";

interface IAaveLeverageModule {
    function sync(ISetToken _setToken) external virtual;
}

/*
    Copyright 2021 Index Cooperative
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IUniswapV2Factory } from "@uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol";
import { IUniswapV2Router02 } from "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
import { Math } from "@openzeppelin/contracts/math/Math.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import { IBasicIssuanceModule } from "../interfaces/IBasicIssuanceModule.sol";
import { IController } from "../interfaces/IController.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { IWETH } from "../interfaces/IWETH.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { UniSushiV2Library } from "../../external/contracts/UniSushiV2Library.sol";

/**
 * @title ExchangeIssuance
 * @author Index Coop
 *
 * Contract for issuing and redeeming any SetToken using ETH or an ERC20 as the paying/receiving currency.
 * All swaps are done using the best price found on Uniswap or Sushiswap.
 *
 */
contract ExchangeIssuanceV2 is ReentrancyGuard {

    using Address for address payable;
    using SafeMath for uint256;
    using PreciseUnitMath for uint256;
    using SafeERC20 for IERC20;
    using SafeERC20 for ISetToken;

    /* ============ Enums ============ */

    enum Exchange { Uniswap, Sushiswap, None }

    /* ============ Constants ============= */

    uint256 constant private MAX_UINT96 = 2**96 - 1;
    address constant public ETH_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;

    /* ============ State Variables ============ */

    address public WETH;
    IUniswapV2Router02 public uniRouter;
    IUniswapV2Router02 public sushiRouter;

    address public immutable uniFactory;
    address public immutable sushiFactory;

    IController public immutable setController;
    IBasicIssuanceModule public immutable basicIssuanceModule;

    /* ============ Events ============ */

    event ExchangeIssue(
        address indexed _recipient,     // The recipient address of the issued SetTokens
        ISetToken indexed _setToken,    // The issued SetToken
        IERC20 indexed _inputToken,     // The address of the input asset(ERC20/ETH) used to issue the SetTokens
        uint256 _amountInputToken,      // The amount of input tokens used for issuance
        uint256 _amountSetIssued        // The amount of SetTokens received by the recipient
    );

    event ExchangeRedeem(
        address indexed _recipient,     // The recipient address which redeemed the SetTokens
        ISetToken indexed _setToken,    // The redeemed SetToken
        IERC20 indexed _outputToken,    // The address of output asset(ERC20/ETH) received by the recipient
        uint256 _amountSetRedeemed,     // The amount of SetTokens redeemed for output tokens
        uint256 _amountOutputToken      // The amount of output tokens received by the recipient
    );

    event Refund(
        address indexed _recipient,     // The recipient address which redeemed the SetTokens
        uint256 _refundAmount           // The amount of ETH redunded to the recipient
    );

    /* ============ Modifiers ============ */

    modifier isSetToken(ISetToken _setToken) {
         require(setController.isSet(address(_setToken)), "ExchangeIssuance: INVALID SET");
         _;
    }

    /* ============ Constructor ============ */

    constructor(
        address _weth,
        address _uniFactory,
        IUniswapV2Router02 _uniRouter,
        address _sushiFactory,
        IUniswapV2Router02 _sushiRouter,
        IController _setController,
        IBasicIssuanceModule _basicIssuanceModule
    )
        public
    {
        uniFactory = _uniFactory;
        uniRouter = _uniRouter;

        sushiFactory = _sushiFactory;
        sushiRouter = _sushiRouter;

        setController = _setController;
        basicIssuanceModule = _basicIssuanceModule;

        WETH = _weth;
        IERC20(WETH).safeApprove(address(uniRouter), PreciseUnitMath.maxUint256());
        IERC20(WETH).safeApprove(address(sushiRouter), PreciseUnitMath.maxUint256());
    }

    /* ============ Public Functions ============ */

    /**
     * Runs all the necessary approval functions required for a given ERC20 token.
     * This function can be called when a new token is added to a SetToken during a
     * rebalance.
     *
     * @param _token    Address of the token which needs approval
     */
    function approveToken(IERC20 _token) public {
        _safeApprove(_token, address(uniRouter), MAX_UINT96);
        _safeApprove(_token, address(sushiRouter), MAX_UINT96);
        _safeApprove(_token, address(basicIssuanceModule), MAX_UINT96);
    }

    /* ============ External Functions ============ */

    /**
     * Runs all the necessary approval functions required for a list of ERC20 tokens.
     *
     * @param _tokens    Addresses of the tokens which need approval
     */
    function approveTokens(IERC20[] calldata _tokens) external {
        for (uint256 i = 0; i < _tokens.length; i++) {
            approveToken(_tokens[i]);
        }
    }

    /**
     * Runs all the necessary approval functions required before issuing
     * or redeeming a SetToken. This function need to be called only once before the first time
     * this smart contract is used on any particular SetToken.
     *
     * @param _setToken    Address of the SetToken being initialized
     */
    function approveSetToken(ISetToken _setToken) isSetToken(_setToken) external {
        address[] memory components = _setToken.getComponents();
        for (uint256 i = 0; i < components.length; i++) {
            // Check that the component does not have external positions
            require(
                _setToken.getExternalPositionModules(components[i]).length == 0,
                "ExchangeIssuance: EXTERNAL_POSITIONS_NOT_ALLOWED"
            );
            approveToken(IERC20(components[i]));
        }
    }

    /**
     * Issues SetTokens for an exact amount of input ERC20 tokens.
     * The ERC20 token must be approved by the sender to this contract.
     *
     * @param _setToken         Address of the SetToken being issued
     * @param _inputToken       Address of input token
     * @param _amountInput      Amount of the input token / ether to spend
     * @param _minSetReceive    Minimum amount of SetTokens to receive. Prevents unnecessary slippage.
     *
     * @return setTokenAmount   Amount of SetTokens issued to the caller
     */
    function issueSetForExactToken(
        ISetToken _setToken,
        IERC20 _inputToken,
        uint256 _amountInput,
        uint256 _minSetReceive
    )
        isSetToken(_setToken)
        external
        nonReentrant
        returns (uint256)
    {
        require(_amountInput > 0, "ExchangeIssuance: INVALID INPUTS");

        _inputToken.safeTransferFrom(msg.sender, address(this), _amountInput);

        uint256 amountEth = address(_inputToken) == WETH
            ? _amountInput
            : _swapTokenForWETH(_inputToken, _amountInput);

        uint256 setTokenAmount = _issueSetForExactWETH(_setToken, _minSetReceive, amountEth);

        emit ExchangeIssue(msg.sender, _setToken, _inputToken, _amountInput, setTokenAmount);
        return setTokenAmount;
    }

    /**
    * Issues an exact amount of SetTokens for given amount of input ERC20 tokens.
    * The excess amount of tokens is returned in an equivalent amount of ether.
    *
    * @param _setToken              Address of the SetToken to be issued
    * @param _inputToken            Address of the input token
    * @param _amountSetToken        Amount of SetTokens to issue
    * @param _maxAmountInputToken   Maximum amount of input tokens to be used to issue SetTokens. The unused
    *                               input tokens are returned as ether.
    *
    * @return amountEthReturn       Amount of ether returned to the caller
    */
    function issueExactSetFromToken(
        ISetToken _setToken,
        IERC20 _inputToken,
        uint256 _amountSetToken,
        uint256 _maxAmountInputToken
    )
        isSetToken(_setToken)
        external
        nonReentrant
        returns (uint256)
    {
        require(_amountSetToken > 0 && _maxAmountInputToken > 0, "ExchangeIssuance: INVALID INPUTS");

        _inputToken.safeTransferFrom(msg.sender, address(this), _maxAmountInputToken);

        uint256 initETHAmount = address(_inputToken) == WETH
            ? _maxAmountInputToken
            : _swapTokenForWETH(_inputToken, _maxAmountInputToken);

        uint256 amountEthSpent = _issueExactSetFromWETH(_setToken, _amountSetToken, initETHAmount);

        uint256 amountEthReturn = initETHAmount.sub(amountEthSpent);
        if (amountEthReturn > 0) {
            IERC20(WETH).safeTransfer(msg.sender,  amountEthReturn);
        }

        emit Refund(msg.sender, amountEthReturn);
        emit ExchangeIssue(msg.sender, _setToken, _inputToken, _maxAmountInputToken, _amountSetToken);
        return amountEthReturn;
    }

    /**
     * Redeems an exact amount of SetTokens for an ERC20 token.
     * The SetToken must be approved by the sender to this contract.
     *
     * @param _setToken             Address of the SetToken being redeemed
     * @param _outputToken          Address of output token
     * @param _amountSetToken       Amount SetTokens to redeem
     * @param _minOutputReceive     Minimum amount of output token to receive
     *
     * @return outputAmount         Amount of output tokens sent to the caller
     */
    function redeemExactSetForToken(
        ISetToken _setToken,
        IERC20 _outputToken,
        uint256 _amountSetToken,
        uint256 _minOutputReceive
    )
        isSetToken(_setToken)
        external
        nonReentrant
        returns (uint256)
    {
        require(_amountSetToken > 0, "ExchangeIssuance: INVALID INPUTS");

        address[] memory components = _setToken.getComponents();
        (
            uint256 totalEth,
            uint256[] memory amountComponents,
            Exchange[] memory exchanges
        ) =  _getAmountETHForRedemption(_setToken, components, _amountSetToken);

        uint256 outputAmount;
        if (address(_outputToken) == WETH) {
            require(totalEth > _minOutputReceive, "ExchangeIssuance: INSUFFICIENT_OUTPUT_AMOUNT");
            _redeemExactSet(_setToken, _amountSetToken);
            outputAmount = _liquidateComponentsForWETH(components, amountComponents, exchanges);
        } else {
            (uint256 totalOutput, Exchange outTokenExchange, ) = _getMaxTokenForExactToken(totalEth, address(WETH), address(_outputToken));
            require(totalOutput > _minOutputReceive, "ExchangeIssuance: INSUFFICIENT_OUTPUT_AMOUNT");
            _redeemExactSet(_setToken, _amountSetToken);
            uint256 outputEth = _liquidateComponentsForWETH(components, amountComponents, exchanges);
            outputAmount = _swapExactTokensForTokens(outTokenExchange, WETH, address(_outputToken), outputEth);
        }

        _outputToken.safeTransfer(msg.sender, outputAmount);
        emit ExchangeRedeem(msg.sender, _setToken, _outputToken, _amountSetToken, outputAmount);
        return outputAmount;
    }


    /**
     * Returns an estimated amount of SetToken that can be issued given an amount of input ERC20 token.
     *
     * @param _setToken         Address of the SetToken being issued
     * @param _amountInput      Amount of the input token to spend
     * @param _inputToken       Address of input token.
     *
     * @return                  Estimated amount of SetTokens that will be received
     */
    function getEstimatedIssueSetAmount(
        ISetToken _setToken,
        IERC20 _inputToken,
        uint256 _amountInput
    )
        isSetToken(_setToken)
        external
        view
        returns (uint256)
    {
        require(_amountInput > 0, "ExchangeIssuance: INVALID INPUTS");

        uint256 amountEth;
        if (address(_inputToken) != WETH) {
            // get max amount of WETH for the `_amountInput` amount of input tokens
            (amountEth, , ) = _getMaxTokenForExactToken(_amountInput, address(_inputToken), WETH);
        } else {
            amountEth = _amountInput;
        }

        address[] memory components = _setToken.getComponents();
        (uint256 setIssueAmount, , ) = _getSetIssueAmountForETH(_setToken, components, amountEth);
        return setIssueAmount;
    }

    /**
    * Returns the amount of input ERC20 tokens required to issue an exact amount of SetTokens.
    *
    * @param _setToken          Address of the SetToken being issued
    * @param _amountSetToken    Amount of SetTokens to issue
    *
    * @return                   Amount of tokens needed to issue specified amount of SetTokens
    */
    function getAmountInToIssueExactSet(
        ISetToken _setToken,
        IERC20 _inputToken,
        uint256 _amountSetToken
    )
        isSetToken(_setToken)
        external
        view
        returns(uint256)
    {
        require(_amountSetToken > 0, "ExchangeIssuance: INVALID INPUTS");

        address[] memory components = _setToken.getComponents();
        (uint256 totalEth, , , , ) = _getAmountETHForIssuance(_setToken, components, _amountSetToken);

        if (address(_inputToken) == WETH) {
            return totalEth;
        }

        (uint256 tokenAmount, , ) = _getMinTokenForExactToken(totalEth, address(_inputToken), address(WETH));
        return tokenAmount;
    }

    /**
     * Returns amount of output ERC20 tokens received upon redeeming a given amount of SetToken.
     *
     * @param _setToken             Address of SetToken to be redeemed
     * @param _amountSetToken       Amount of SetToken to be redeemed
     * @param _outputToken          Address of output token
     *
     * @return                      Estimated amount of ether/erc20 that will be received
     */
    function getAmountOutOnRedeemSet(
        ISetToken _setToken,
        address _outputToken,
        uint256 _amountSetToken
    )
        isSetToken(_setToken)
        external
        view
        returns (uint256)
    {
        require(_amountSetToken > 0, "ExchangeIssuance: INVALID INPUTS");

        address[] memory components = _setToken.getComponents();
        (uint256 totalEth, , ) = _getAmountETHForRedemption(_setToken, components, _amountSetToken);

        if (_outputToken == WETH) {
            return totalEth;
        }

        // get maximum amount of tokens for totalEth amount of ETH
        (uint256 tokenAmount, , ) = _getMaxTokenForExactToken(totalEth, WETH, _outputToken);
        return tokenAmount;
    }


    /* ============ Internal Functions ============ */

    /**
     * Sets a max approval limit for an ERC20 token, provided the current allowance
     * is less than the required allownce.
     *
     * @param _token    Token to approve
     * @param _spender  Spender address to approve
     */
    function _safeApprove(IERC20 _token, address _spender, uint256 _requiredAllowance) internal {
        uint256 allowance = _token.allowance(address(this), _spender);
        if (allowance < _requiredAllowance) {
            _token.safeIncreaseAllowance(_spender, MAX_UINT96 - allowance);
        }
    }

    /**
     * Issues SetTokens for an exact amount of input WETH.
     *
     * @param _setToken         Address of the SetToken being issued
     * @param _minSetReceive    Minimum amount of index to receive
     * @param _totalEthAmount   Total amount of WETH to be used to purchase the SetToken components
     *
     * @return setTokenAmount   Amount of SetTokens issued
     */
    function _issueSetForExactWETH(ISetToken _setToken, uint256 _minSetReceive, uint256 _totalEthAmount) internal returns (uint256) {

        address[] memory components = _setToken.getComponents();
        (
            uint256 setIssueAmount,
            uint256[] memory amountEthIn,
            Exchange[] memory exchanges
        ) = _getSetIssueAmountForETH(_setToken, components, _totalEthAmount);

        require(setIssueAmount > _minSetReceive, "ExchangeIssuance: INSUFFICIENT_OUTPUT_AMOUNT");

        for (uint256 i = 0; i < components.length; i++) {
            _swapExactTokensForTokens(exchanges[i], WETH, components[i], amountEthIn[i]);
        }

        basicIssuanceModule.issue(_setToken, setIssueAmount, msg.sender);
        return setIssueAmount;
    }

    /**
     * Issues an exact amount of SetTokens using WETH.
     * Acquires SetToken components at the best price accross uniswap and sushiswap.
     * Uses the acquired components to issue the SetTokens.
     *
     * @param _setToken          Address of the SetToken being issued
     * @param _amountSetToken    Amount of SetTokens to be issued
     * @param _maxEther          Max amount of ether that can be used to acquire the SetToken components
     *
     * @return totalEth          Total amount of ether used to acquire the SetToken components
     */
    function _issueExactSetFromWETH(ISetToken _setToken, uint256 _amountSetToken, uint256 _maxEther) internal returns (uint256) {

        address[] memory components = _setToken.getComponents();
        (
            uint256 sumEth,
            ,
            Exchange[] memory exchanges,
            uint256[] memory amountComponents,
        ) = _getAmountETHForIssuance(_setToken, components, _amountSetToken);

        require(sumEth <= _maxEther, "ExchangeIssuance: INSUFFICIENT_INPUT_AMOUNT");

        uint256 totalEth = 0;
        for (uint256 i = 0; i < components.length; i++) {
            uint256 amountEth = _swapTokensForExactTokens(exchanges[i], WETH, components[i], amountComponents[i]);
            totalEth = totalEth.add(amountEth);
        }
        basicIssuanceModule.issue(_setToken, _amountSetToken, msg.sender);
        return totalEth;
    }

    /**
     * Redeems a given amount of SetToken.
     *
     * @param _setToken     Address of the SetToken to be redeemed
     * @param _amount       Amount of SetToken to be redeemed
     */
    function _redeemExactSet(ISetToken _setToken, uint256 _amount) internal returns (uint256) {
        _setToken.safeTransferFrom(msg.sender, address(this), _amount);
        basicIssuanceModule.redeem(_setToken, _amount, address(this));
    }

    /**
     * Liquidates a given list of SetToken components for WETH.
     *
     * @param _components           An array containing the address of SetToken components
     * @param _amountComponents     An array containing the amount of each SetToken component
     * @param _exchanges            An array containing the exchange on which to liquidate the SetToken component
     *
     * @return                      Total amount of WETH received after liquidating all SetToken components
     */
    function _liquidateComponentsForWETH(address[] memory _components, uint256[] memory _amountComponents, Exchange[] memory _exchanges)
        internal
        returns (uint256)
    {
        uint256 sumEth = 0;
        for (uint256 i = 0; i < _components.length; i++) {
            sumEth = _exchanges[i] == Exchange.None
                ? sumEth.add(_amountComponents[i])
                : sumEth.add(_swapExactTokensForTokens(_exchanges[i], _components[i], WETH, _amountComponents[i]));
        }
        return sumEth;
    }

    /**
     * Gets the total amount of ether required for purchasing each component in a SetToken,
     * to enable the issuance of a given amount of SetTokens.
     *
     * @param _setToken             Address of the SetToken to be issued
     * @param _components           An array containing the addresses of the SetToken components
     * @param _amountSetToken       Amount of SetToken to be issued
     *
     * @return sumEth               The total amount of Ether reuired to issue the set
     * @return amountEthIn          An array containing the amount of ether to purchase each component of the SetToken
     * @return exchanges            An array containing the exchange on which to perform the purchase
     * @return amountComponents     An array containing the amount of each SetToken component required for issuing the given
     *                              amount of SetToken
     * @return pairAddresses        An array containing the pair addresses of ETH/component exchange pool
     */
    function _getAmountETHForIssuance(ISetToken _setToken, address[] memory _components, uint256 _amountSetToken)
        internal
        view
        returns (
            uint256 sumEth,
            uint256[] memory amountEthIn,
            Exchange[] memory exchanges,
            uint256[] memory amountComponents,
            address[] memory pairAddresses
        )
    {
        sumEth = 0;
        amountEthIn = new uint256[](_components.length);
        amountComponents = new uint256[](_components.length);
        exchanges = new Exchange[](_components.length);
        pairAddresses = new address[](_components.length);

        for (uint256 i = 0; i < _components.length; i++) {

            // Check that the component does not have external positions
            require(
                _setToken.getExternalPositionModules(_components[i]).length == 0,
                "ExchangeIssuance: EXTERNAL_POSITIONS_NOT_ALLOWED"
            );

            // Get minimum amount of ETH to be spent to acquire the required amount of SetToken component
            uint256 unit = uint256(_setToken.getDefaultPositionRealUnit(_components[i]));
            amountComponents[i] = uint256(unit).preciseMulCeil(_amountSetToken);

            (amountEthIn[i], exchanges[i], pairAddresses[i]) = _getMinTokenForExactToken(amountComponents[i], WETH, _components[i]);
            sumEth = sumEth.add(amountEthIn[i]);
        }
        return (sumEth, amountEthIn, exchanges, amountComponents, pairAddresses);
    }

    /**
     * Gets the total amount of ether returned from liquidating each component in a SetToken.
     *
     * @param _setToken             Address of the SetToken to be redeemed
     * @param _components           An array containing the addresses of the SetToken components
     * @param _amountSetToken       Amount of SetToken to be redeemed
     *
     * @return sumEth               The total amount of Ether that would be obtained from liquidating the SetTokens
     * @return amountComponents     An array containing the amount of SetToken component to be liquidated
     * @return exchanges            An array containing the exchange on which to liquidate the SetToken components
     */
    function _getAmountETHForRedemption(ISetToken _setToken, address[] memory _components, uint256 _amountSetToken)
        internal
        view
        returns (uint256, uint256[] memory, Exchange[] memory)
    {
        uint256 sumEth = 0;
        uint256 amountEth = 0;

        uint256[] memory amountComponents = new uint256[](_components.length);
        Exchange[] memory exchanges = new Exchange[](_components.length);

        for (uint256 i = 0; i < _components.length; i++) {

            // Check that the component does not have external positions
            require(
                _setToken.getExternalPositionModules(_components[i]).length == 0,
                "ExchangeIssuance: EXTERNAL_POSITIONS_NOT_ALLOWED"
            );

            uint256 unit = uint256(_setToken.getDefaultPositionRealUnit(_components[i]));
            amountComponents[i] = unit.preciseMul(_amountSetToken);

            // get maximum amount of ETH received for a given amount of SetToken component
            (amountEth, exchanges[i], ) = _getMaxTokenForExactToken(amountComponents[i], _components[i], WETH);
            sumEth = sumEth.add(amountEth);
        }
        return (sumEth, amountComponents, exchanges);
    }

    /**
     * Returns an estimated amount of SetToken that can be issued given an amount of input ERC20 token.
     *
     * @param _setToken             Address of the SetToken to be issued
     * @param _components           An array containing the addresses of the SetToken components
     * @param _amountEth            Total amount of ether available for the purchase of SetToken components
     *
     * @return setIssueAmount       The max amount of SetTokens that can be issued
     * @return amountEthIn          An array containing the amount ether required to purchase each SetToken component
     * @return exchanges            An array containing the exchange on which to purchase the SetToken components
     */
    function _getSetIssueAmountForETH(ISetToken _setToken, address[] memory _components, uint256 _amountEth)
        internal
        view
        returns (uint256 setIssueAmount, uint256[] memory amountEthIn, Exchange[] memory exchanges)
    {
        uint256 sumEth;
        uint256[] memory unitAmountEthIn;
        uint256[] memory unitAmountComponents;
        address[] memory pairAddresses;
        (
            sumEth,
            unitAmountEthIn,
            exchanges,
            unitAmountComponents,
            pairAddresses
        ) = _getAmountETHForIssuance(_setToken, _components, PreciseUnitMath.preciseUnit());

        setIssueAmount = PreciseUnitMath.maxUint256();
        amountEthIn = new uint256[](_components.length);

        for (uint256 i = 0; i < _components.length; i++) {

            amountEthIn[i] = unitAmountEthIn[i].mul(_amountEth).div(sumEth);

            uint256 amountComponent;
            if (exchanges[i] == Exchange.None) {
                amountComponent = amountEthIn[i];
            } else {
                (uint256 reserveIn, uint256 reserveOut) = UniSushiV2Library.getReserves(pairAddresses[i], WETH, _components[i]);
                amountComponent = UniSushiV2Library.getAmountOut(amountEthIn[i], reserveIn, reserveOut);
            }
            setIssueAmount = Math.min(amountComponent.preciseDiv(unitAmountComponents[i]), setIssueAmount);
        }
        return (setIssueAmount, amountEthIn, exchanges);
    }

    /**
     * Swaps a given amount of an ERC20 token for WETH for the best price on Uniswap/Sushiswap.
     *
     * @param _token    Address of the ERC20 token to be swapped for WETH
     * @param _amount   Amount of ERC20 token to be swapped
     *
     * @return          Amount of WETH received after the swap
     */
    function _swapTokenForWETH(IERC20 _token, uint256 _amount) internal returns (uint256) {
        (, Exchange exchange, ) = _getMaxTokenForExactToken(_amount, address(_token), WETH);
        IUniswapV2Router02 router = _getRouter(exchange);
        _safeApprove(_token, address(router), _amount);
        return _swapExactTokensForTokens(exchange, address(_token), WETH, _amount);
    }

    /**
     * Swap exact tokens for another token on a given DEX.
     *
     * @param _exchange     The exchange on which to peform the swap
     * @param _tokenIn      The address of the input token
     * @param _tokenOut     The address of the output token
     * @param _amountIn     The amount of input token to be spent
     *
     * @return              The amount of output tokens
     */
    function _swapExactTokensForTokens(Exchange _exchange, address _tokenIn, address _tokenOut, uint256 _amountIn) internal returns (uint256) {
        if (_tokenIn == _tokenOut) {
            return _amountIn;
        }
        address[] memory path = new address[](2);
        path[0] = _tokenIn;
        path[1] = _tokenOut;
        return _getRouter(_exchange).swapExactTokensForTokens(_amountIn, 0, path, address(this), block.timestamp)[1];
    }

    /**
     * Swap tokens for exact amount of output tokens on a given DEX.
     *
     * @param _exchange     The exchange on which to peform the swap
     * @param _tokenIn      The address of the input token
     * @param _tokenOut     The address of the output token
     * @param _amountOut    The amount of output token required
     *
     * @return              The amount of input tokens spent
     */
    function _swapTokensForExactTokens(Exchange _exchange, address _tokenIn, address _tokenOut, uint256 _amountOut) internal returns (uint256) {
        if (_tokenIn == _tokenOut) {
            return _amountOut;
        }
        address[] memory path = new address[](2);
        path[0] = _tokenIn;
        path[1] = _tokenOut;
        return _getRouter(_exchange).swapTokensForExactTokens(_amountOut, PreciseUnitMath.maxUint256(), path, address(this), block.timestamp)[0];
    }

    /**
     * Compares the amount of token required for an exact amount of another token across both exchanges,
     * and returns the min amount.
     *
     * @param _amountOut    The amount of output token
     * @param _tokenA       The address of tokenA
     * @param _tokenB       The address of tokenB
     *
     * @return              The min amount of tokenA required across both exchanges
     * @return              The Exchange on which minimum amount of tokenA is required
     * @return              The pair address of the uniswap/sushiswap pool containing _tokenA and _tokenB
     */
    function _getMinTokenForExactToken(uint256 _amountOut, address _tokenA, address _tokenB) internal view returns (uint256, Exchange, address) {
        if (_tokenA == _tokenB) {
            return (_amountOut, Exchange.None, ETH_ADDRESS);
        }

        uint256 maxIn = PreciseUnitMath.maxUint256() ;
        uint256 uniTokenIn = maxIn;
        uint256 sushiTokenIn = maxIn;

        address uniswapPair = _getPair(uniFactory, _tokenA, _tokenB);
        if (uniswapPair != address(0)) {
            (uint256 reserveIn, uint256 reserveOut) = UniSushiV2Library.getReserves(uniswapPair, _tokenA, _tokenB);
            // Prevent subtraction overflow by making sure pool reserves are greater than swap amount
            if (reserveOut > _amountOut) {
                uniTokenIn = UniSushiV2Library.getAmountIn(_amountOut, reserveIn, reserveOut);
            }
        }

        address sushiswapPair = _getPair(sushiFactory, _tokenA, _tokenB);
        if (sushiswapPair != address(0)) {
            (uint256 reserveIn, uint256 reserveOut) = UniSushiV2Library.getReserves(sushiswapPair, _tokenA, _tokenB);
            // Prevent subtraction overflow by making sure pool reserves are greater than swap amount
            if (reserveOut > _amountOut) {
                sushiTokenIn = UniSushiV2Library.getAmountIn(_amountOut, reserveIn, reserveOut);
            }
        }

        // Fails if both the values are maxIn
        require(!(uniTokenIn == maxIn && sushiTokenIn == maxIn), "ExchangeIssuance: ILLIQUID_SET_COMPONENT");
        return (uniTokenIn <= sushiTokenIn) ? (uniTokenIn, Exchange.Uniswap, uniswapPair) : (sushiTokenIn, Exchange.Sushiswap, sushiswapPair);
    }

    /**
     * Compares the amount of token received for an exact amount of another token across both exchanges,
     * and returns the max amount.
     *
     * @param _amountIn     The amount of input token
     * @param _tokenA       The address of tokenA
     * @param _tokenB       The address of tokenB
     *
     * @return              The max amount of tokens that can be received across both exchanges
     * @return              The Exchange on which maximum amount of token can be received
     * @return              The pair address of the uniswap/sushiswap pool containing _tokenA and _tokenB
     */
    function _getMaxTokenForExactToken(uint256 _amountIn, address _tokenA, address _tokenB) internal view returns (uint256, Exchange, address) {
        if (_tokenA == _tokenB) {
            return (_amountIn, Exchange.None, ETH_ADDRESS);
        }

        uint256 uniTokenOut = 0;
        uint256 sushiTokenOut = 0;

        address uniswapPair = _getPair(uniFactory, _tokenA, _tokenB);
        if(uniswapPair != address(0)) {
            (uint256 reserveIn, uint256 reserveOut) = UniSushiV2Library.getReserves(uniswapPair, _tokenA, _tokenB);
            uniTokenOut = UniSushiV2Library.getAmountOut(_amountIn, reserveIn, reserveOut);
        }

        address sushiswapPair = _getPair(sushiFactory, _tokenA, _tokenB);
        if(sushiswapPair != address(0)) {
            (uint256 reserveIn, uint256 reserveOut) = UniSushiV2Library.getReserves(sushiswapPair, _tokenA, _tokenB);
            sushiTokenOut = UniSushiV2Library.getAmountOut(_amountIn, reserveIn, reserveOut);
        }

        // Fails if both the values are 0
        require(!(uniTokenOut == 0 && sushiTokenOut == 0), "ExchangeIssuance: ILLIQUID_SET_COMPONENT");
        return (uniTokenOut >= sushiTokenOut) ? (uniTokenOut, Exchange.Uniswap, uniswapPair) : (sushiTokenOut, Exchange.Sushiswap, sushiswapPair);
    }

    /**
     * Returns the pair address for on a given DEX.
     *
     * @param _factory   The factory to address
     * @param _tokenA    The address of tokenA
     * @param _tokenB    The address of tokenB
     *
     * @return           The pair address (Note: address(0) is returned by default if the pair is not available on that DEX)
     */
    function _getPair(address _factory, address _tokenA, address _tokenB) internal view returns (address) {
        return IUniswapV2Factory(_factory).getPair(_tokenA, _tokenB);
    }

    /**
     * Returns the router address of a given exchange.
     *
     * @param _exchange     The Exchange whose router address is needed
     *
     * @return              IUniswapV2Router02 router of the given exchange
     */
     function _getRouter(Exchange _exchange) internal view returns(IUniswapV2Router02) {
         return (_exchange == Exchange.Uniswap) ? uniRouter : sushiRouter;
     }

}

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

/*
    Copyright 2021 Index Cooperative
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IUniswapV2Factory } from "@uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol";
import { IUniswapV2Router02 } from "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
import { Math } from "@openzeppelin/contracts/math/Math.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import { IBasicIssuanceModule } from "../interfaces/IBasicIssuanceModule.sol";
import { IController } from "../interfaces/IController.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { IWETH } from "../interfaces/IWETH.sol";
import { PreciseUnitMath } from "../lib/PreciseUnitMath.sol";
import { UniSushiV2Library } from "../../external/contracts/UniSushiV2Library.sol";


/**
 * @title ExchangeIssuance
 * @author Index Coop
 *
 * Contract for issuing and redeeming any SetToken using ETH or an ERC20 as the paying/receiving currency.
 * All swaps are done using the best price found on Uniswap or Sushiswap.
 *
 */
contract ExchangeIssuance is ReentrancyGuard {

    using Address for address payable;
    using SafeMath for uint256;
    using PreciseUnitMath for uint256;
    using SafeERC20 for IERC20;
    using SafeERC20 for ISetToken;

    /* ============ Enums ============ */

    enum Exchange { Uniswap, Sushiswap, None }

    /* ============ Constants ============= */

    uint256 constant private MAX_UINT96 = 2**96 - 1;
    address constant public ETH_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;

    /* ============ State Variables ============ */

    address public WETH;
    IUniswapV2Router02 public uniRouter;
    IUniswapV2Router02 public sushiRouter;

    address public immutable uniFactory;
    address public immutable sushiFactory;

    IController public immutable setController;
    IBasicIssuanceModule public immutable basicIssuanceModule;

    /* ============ Events ============ */

    event ExchangeIssue(
        address indexed _recipient,     // The recipient address of the issued SetTokens
        ISetToken indexed _setToken,    // The issued SetToken
        IERC20 indexed _inputToken,     // The address of the input asset(ERC20/ETH) used to issue the SetTokens
        uint256 _amountInputToken,      // The amount of input tokens used for issuance
        uint256 _amountSetIssued        // The amount of SetTokens received by the recipient
    );

    event ExchangeRedeem(
        address indexed _recipient,     // The recipient address which redeemed the SetTokens
        ISetToken indexed _setToken,    // The redeemed SetToken
        IERC20 indexed _outputToken,    // The address of output asset(ERC20/ETH) received by the recipient
        uint256 _amountSetRedeemed,     // The amount of SetTokens redeemed for output tokens
        uint256 _amountOutputToken      // The amount of output tokens received by the recipient
    );

    event Refund(
        address indexed _recipient,     // The recipient address which redeemed the SetTokens
        uint256 _refundAmount           // The amount of ETH redunded to the recipient
    );

    /* ============ Modifiers ============ */

    modifier isSetToken(ISetToken _setToken) {
         require(setController.isSet(address(_setToken)), "ExchangeIssuance: INVALID SET");
         _;
    }

    /* ============ Constructor ============ */

    constructor(
        address _weth,
        address _uniFactory,
        IUniswapV2Router02 _uniRouter,
        address _sushiFactory,
        IUniswapV2Router02 _sushiRouter,
        IController _setController,
        IBasicIssuanceModule _basicIssuanceModule
    )
        public
    {
        uniFactory = _uniFactory;
        uniRouter = _uniRouter;

        sushiFactory = _sushiFactory;
        sushiRouter = _sushiRouter;

        setController = _setController;
        basicIssuanceModule = _basicIssuanceModule;

        WETH = _weth;
        IERC20(WETH).safeApprove(address(uniRouter), PreciseUnitMath.maxUint256());
        IERC20(WETH).safeApprove(address(sushiRouter), PreciseUnitMath.maxUint256());
    }

    /* ============ Public Functions ============ */

    /**
     * Runs all the necessary approval functions required for a given ERC20 token.
     * This function can be called when a new token is added to a SetToken during a
     * rebalance.
     *
     * @param _token    Address of the token which needs approval
     */
    function approveToken(IERC20 _token) public {
        _safeApprove(_token, address(uniRouter), MAX_UINT96);
        _safeApprove(_token, address(sushiRouter), MAX_UINT96);
        _safeApprove(_token, address(basicIssuanceModule), MAX_UINT96);
    }

    /* ============ External Functions ============ */

    receive() external payable {
        // required for weth.withdraw() to work properly
        require(msg.sender == WETH, "ExchangeIssuance: Direct deposits not allowed");
    }

    /**
     * Runs all the necessary approval functions required for a list of ERC20 tokens.
     *
     * @param _tokens    Addresses of the tokens which need approval
     */
    function approveTokens(IERC20[] calldata _tokens) external {
        for (uint256 i = 0; i < _tokens.length; i++) {
            approveToken(_tokens[i]);
        }
    }

    /**
     * Runs all the necessary approval functions required before issuing
     * or redeeming a SetToken. This function need to be called only once before the first time
     * this smart contract is used on any particular SetToken.
     *
     * @param _setToken    Address of the SetToken being initialized
     */
    function approveSetToken(ISetToken _setToken) isSetToken(_setToken) external {
        address[] memory components = _setToken.getComponents();
        for (uint256 i = 0; i < components.length; i++) {
            // Check that the component does not have external positions
            require(
                _setToken.getExternalPositionModules(components[i]).length == 0,
                "ExchangeIssuance: EXTERNAL_POSITIONS_NOT_ALLOWED"
            );
            approveToken(IERC20(components[i]));
        }
    }

    /**
     * Issues SetTokens for an exact amount of input ERC20 tokens.
     * The ERC20 token must be approved by the sender to this contract.
     *
     * @param _setToken         Address of the SetToken being issued
     * @param _inputToken       Address of input token
     * @param _amountInput      Amount of the input token / ether to spend
     * @param _minSetReceive    Minimum amount of SetTokens to receive. Prevents unnecessary slippage.
     *
     * @return setTokenAmount   Amount of SetTokens issued to the caller
     */
    function issueSetForExactToken(
        ISetToken _setToken,
        IERC20 _inputToken,
        uint256 _amountInput,
        uint256 _minSetReceive
    )
        isSetToken(_setToken)
        external
        nonReentrant
        returns (uint256)
    {
        require(_amountInput > 0, "ExchangeIssuance: INVALID INPUTS");

        _inputToken.safeTransferFrom(msg.sender, address(this), _amountInput);

        uint256 amountEth = address(_inputToken) == WETH
            ? _amountInput
            : _swapTokenForWETH(_inputToken, _amountInput);

        uint256 setTokenAmount = _issueSetForExactWETH(_setToken, _minSetReceive, amountEth);

        emit ExchangeIssue(msg.sender, _setToken, _inputToken, _amountInput, setTokenAmount);
        return setTokenAmount;
    }

    /**
     * Issues SetTokens for an exact amount of input ether.
     *
     * @param _setToken         Address of the SetToken to be issued
     * @param _minSetReceive    Minimum amount of SetTokens to receive. Prevents unnecessary slippage.
     *
     * @return setTokenAmount   Amount of SetTokens issued to the caller
     */
    function issueSetForExactETH(
        ISetToken _setToken,
        uint256 _minSetReceive
    )
        isSetToken(_setToken)
        external
        payable
        nonReentrant
        returns(uint256)
    {
        require(msg.value > 0, "ExchangeIssuance: INVALID INPUTS");

        IWETH(WETH).deposit{value: msg.value}();

        uint256 setTokenAmount = _issueSetForExactWETH(_setToken, _minSetReceive, msg.value);

        emit ExchangeIssue(msg.sender, _setToken, IERC20(ETH_ADDRESS), msg.value, setTokenAmount);
        return setTokenAmount;
    }

    /**
    * Issues an exact amount of SetTokens for given amount of input ERC20 tokens.
    * The excess amount of tokens is returned in an equivalent amount of ether.
    *
    * @param _setToken              Address of the SetToken to be issued
    * @param _inputToken            Address of the input token
    * @param _amountSetToken        Amount of SetTokens to issue
    * @param _maxAmountInputToken   Maximum amount of input tokens to be used to issue SetTokens. The unused
    *                               input tokens are returned as ether.
    *
    * @return amountEthReturn       Amount of ether returned to the caller
    */
    function issueExactSetFromToken(
        ISetToken _setToken,
        IERC20 _inputToken,
        uint256 _amountSetToken,
        uint256 _maxAmountInputToken
    )
        isSetToken(_setToken)
        external
        nonReentrant
        returns (uint256)
    {
        require(_amountSetToken > 0 && _maxAmountInputToken > 0, "ExchangeIssuance: INVALID INPUTS");

        _inputToken.safeTransferFrom(msg.sender, address(this), _maxAmountInputToken);

        uint256 initETHAmount = address(_inputToken) == WETH
            ? _maxAmountInputToken
            : _swapTokenForWETH(_inputToken, _maxAmountInputToken);

        uint256 amountEthSpent = _issueExactSetFromWETH(_setToken, _amountSetToken, initETHAmount);

        uint256 amountEthReturn = initETHAmount.sub(amountEthSpent);
        if (amountEthReturn > 0) {
            IWETH(WETH).withdraw(amountEthReturn);
            (payable(msg.sender)).sendValue(amountEthReturn);
        }

        emit Refund(msg.sender, amountEthReturn);
        emit ExchangeIssue(msg.sender, _setToken, _inputToken, _maxAmountInputToken, _amountSetToken);
        return amountEthReturn;
    }

    /**
    * Issues an exact amount of SetTokens using a given amount of ether.
    * The excess ether is returned back.
    *
    * @param _setToken          Address of the SetToken being issued
    * @param _amountSetToken    Amount of SetTokens to issue
    *
    * @return amountEthReturn   Amount of ether returned to the caller
    */
    function issueExactSetFromETH(
        ISetToken _setToken,
        uint256 _amountSetToken
    )
        isSetToken(_setToken)
        external
        payable
        nonReentrant
        returns (uint256)
    {
        require(msg.value > 0 && _amountSetToken > 0, "ExchangeIssuance: INVALID INPUTS");

        IWETH(WETH).deposit{value: msg.value}();

        uint256 amountEth = _issueExactSetFromWETH(_setToken, _amountSetToken, msg.value);

        uint256 amountEthReturn = msg.value.sub(amountEth);

        if (amountEthReturn > 0) {
            IWETH(WETH).withdraw(amountEthReturn);
            (payable(msg.sender)).sendValue(amountEthReturn);
        }

        emit Refund(msg.sender, amountEthReturn);
        emit ExchangeIssue(msg.sender, _setToken, IERC20(ETH_ADDRESS), amountEth, _amountSetToken);
        return amountEthReturn;
    }

    /**
     * Redeems an exact amount of SetTokens for an ERC20 token.
     * The SetToken must be approved by the sender to this contract.
     *
     * @param _setToken             Address of the SetToken being redeemed
     * @param _outputToken          Address of output token
     * @param _amountSetToken       Amount SetTokens to redeem
     * @param _minOutputReceive     Minimum amount of output token to receive
     *
     * @return outputAmount         Amount of output tokens sent to the caller
     */
    function redeemExactSetForToken(
        ISetToken _setToken,
        IERC20 _outputToken,
        uint256 _amountSetToken,
        uint256 _minOutputReceive
    )
        isSetToken(_setToken)
        external
        nonReentrant
        returns (uint256)
    {
        require(_amountSetToken > 0, "ExchangeIssuance: INVALID INPUTS");

        address[] memory components = _setToken.getComponents();
        (
            uint256 totalEth,
            uint256[] memory amountComponents,
            Exchange[] memory exchanges
        ) =  _getAmountETHForRedemption(_setToken, components, _amountSetToken);

        uint256 outputAmount;
        if (address(_outputToken) == WETH) {
            require(totalEth > _minOutputReceive, "ExchangeIssuance: INSUFFICIENT_OUTPUT_AMOUNT");
            _redeemExactSet(_setToken, _amountSetToken);
            outputAmount = _liquidateComponentsForWETH(components, amountComponents, exchanges);
        } else {
            (uint256 totalOutput, Exchange outTokenExchange, ) = _getMaxTokenForExactToken(totalEth, address(WETH), address(_outputToken));
            require(totalOutput > _minOutputReceive, "ExchangeIssuance: INSUFFICIENT_OUTPUT_AMOUNT");
            _redeemExactSet(_setToken, _amountSetToken);
            uint256 outputEth = _liquidateComponentsForWETH(components, amountComponents, exchanges);
            outputAmount = _swapExactTokensForTokens(outTokenExchange, WETH, address(_outputToken), outputEth);
        }

        _outputToken.safeTransfer(msg.sender, outputAmount);
        emit ExchangeRedeem(msg.sender, _setToken, _outputToken, _amountSetToken, outputAmount);
        return outputAmount;
    }

    /**
     * Redeems an exact amount of SetTokens for ETH.
     * The SetToken must be approved by the sender to this contract.
     *
     * @param _setToken             Address of the SetToken to be redeemed
     * @param _amountSetToken       Amount of SetTokens to redeem
     * @param _minEthOut            Minimum amount of ETH to receive
     *
     * @return amountEthOut         Amount of ether sent to the caller
     */
    function redeemExactSetForETH(
        ISetToken _setToken,
        uint256 _amountSetToken,
        uint256 _minEthOut
    )
        isSetToken(_setToken)
        external
        nonReentrant
        returns (uint256)
    {
        require(_amountSetToken > 0, "ExchangeIssuance: INVALID INPUTS");

        address[] memory components = _setToken.getComponents();
        (
            uint256 totalEth,
            uint256[] memory amountComponents,
            Exchange[] memory exchanges
        ) =  _getAmountETHForRedemption(_setToken, components, _amountSetToken);

        require(totalEth > _minEthOut, "ExchangeIssuance: INSUFFICIENT_OUTPUT_AMOUNT");

        _redeemExactSet(_setToken, _amountSetToken);

        uint256 amountEthOut = _liquidateComponentsForWETH(components, amountComponents, exchanges);

        IWETH(WETH).withdraw(amountEthOut);
        (payable(msg.sender)).sendValue(amountEthOut);

        emit ExchangeRedeem(msg.sender, _setToken, IERC20(ETH_ADDRESS), _amountSetToken, amountEthOut);
        return amountEthOut;
    }

    /**
     * Returns an estimated amount of SetToken that can be issued given an amount of input ERC20 token.
     *
     * @param _setToken         Address of the SetToken being issued
     * @param _amountInput      Amount of the input token to spend
     * @param _inputToken       Address of input token.
     *
     * @return                  Estimated amount of SetTokens that will be received
     */
    function getEstimatedIssueSetAmount(
        ISetToken _setToken,
        IERC20 _inputToken,
        uint256 _amountInput
    )
        isSetToken(_setToken)
        external
        view
        returns (uint256)
    {
        require(_amountInput > 0, "ExchangeIssuance: INVALID INPUTS");

        uint256 amountEth;
        if (address(_inputToken) != WETH) {
            // get max amount of WETH for the `_amountInput` amount of input tokens
            (amountEth, , ) = _getMaxTokenForExactToken(_amountInput, address(_inputToken), WETH);
        } else {
            amountEth = _amountInput;
        }

        address[] memory components = _setToken.getComponents();
        (uint256 setIssueAmount, , ) = _getSetIssueAmountForETH(_setToken, components, amountEth);
        return setIssueAmount;
    }

    /**
    * Returns the amount of input ERC20 tokens required to issue an exact amount of SetTokens.
    *
    * @param _setToken          Address of the SetToken being issued
    * @param _amountSetToken    Amount of SetTokens to issue
    *
    * @return                   Amount of tokens needed to issue specified amount of SetTokens
    */
    function getAmountInToIssueExactSet(
        ISetToken _setToken,
        IERC20 _inputToken,
        uint256 _amountSetToken
    )
        isSetToken(_setToken)
        external
        view
        returns(uint256)
    {
        require(_amountSetToken > 0, "ExchangeIssuance: INVALID INPUTS");

        address[] memory components = _setToken.getComponents();
        (uint256 totalEth, , , , ) = _getAmountETHForIssuance(_setToken, components, _amountSetToken);

        if (address(_inputToken) == WETH) {
            return totalEth;
        }

        (uint256 tokenAmount, , ) = _getMinTokenForExactToken(totalEth, address(_inputToken), address(WETH));
        return tokenAmount;
    }

    /**
     * Returns amount of output ERC20 tokens received upon redeeming a given amount of SetToken.
     *
     * @param _setToken             Address of SetToken to be redeemed
     * @param _amountSetToken       Amount of SetToken to be redeemed
     * @param _outputToken          Address of output token
     *
     * @return                      Estimated amount of ether/erc20 that will be received
     */
    function getAmountOutOnRedeemSet(
        ISetToken _setToken,
        address _outputToken,
        uint256 _amountSetToken
    )
        isSetToken(_setToken)
        external
        view
        returns (uint256)
    {
        require(_amountSetToken > 0, "ExchangeIssuance: INVALID INPUTS");

        address[] memory components = _setToken.getComponents();
        (uint256 totalEth, , ) = _getAmountETHForRedemption(_setToken, components, _amountSetToken);

        if (_outputToken == WETH) {
            return totalEth;
        }

        // get maximum amount of tokens for totalEth amount of ETH
        (uint256 tokenAmount, , ) = _getMaxTokenForExactToken(totalEth, WETH, _outputToken);
        return tokenAmount;
    }


    /* ============ Internal Functions ============ */

    /**
     * Sets a max approval limit for an ERC20 token, provided the current allowance
     * is less than the required allownce.
     *
     * @param _token    Token to approve
     * @param _spender  Spender address to approve
     */
    function _safeApprove(IERC20 _token, address _spender, uint256 _requiredAllowance) internal {
        uint256 allowance = _token.allowance(address(this), _spender);
        if (allowance < _requiredAllowance) {
            _token.safeIncreaseAllowance(_spender, MAX_UINT96 - allowance);
        }
    }

    /**
     * Issues SetTokens for an exact amount of input WETH.
     *
     * @param _setToken         Address of the SetToken being issued
     * @param _minSetReceive    Minimum amount of index to receive
     * @param _totalEthAmount   Total amount of WETH to be used to purchase the SetToken components
     *
     * @return setTokenAmount   Amount of SetTokens issued
     */
    function _issueSetForExactWETH(ISetToken _setToken, uint256 _minSetReceive, uint256 _totalEthAmount) internal returns (uint256) {

        address[] memory components = _setToken.getComponents();
        (
            uint256 setIssueAmount,
            uint256[] memory amountEthIn,
            Exchange[] memory exchanges
        ) = _getSetIssueAmountForETH(_setToken, components, _totalEthAmount);

        require(setIssueAmount > _minSetReceive, "ExchangeIssuance: INSUFFICIENT_OUTPUT_AMOUNT");

        for (uint256 i = 0; i < components.length; i++) {
            _swapExactTokensForTokens(exchanges[i], WETH, components[i], amountEthIn[i]);
        }

        basicIssuanceModule.issue(_setToken, setIssueAmount, msg.sender);
        return setIssueAmount;
    }

    /**
     * Issues an exact amount of SetTokens using WETH.
     * Acquires SetToken components at the best price accross uniswap and sushiswap.
     * Uses the acquired components to issue the SetTokens.
     *
     * @param _setToken          Address of the SetToken being issued
     * @param _amountSetToken    Amount of SetTokens to be issued
     * @param _maxEther          Max amount of ether that can be used to acquire the SetToken components
     *
     * @return totalEth          Total amount of ether used to acquire the SetToken components
     */
    function _issueExactSetFromWETH(ISetToken _setToken, uint256 _amountSetToken, uint256 _maxEther) internal returns (uint256) {

        address[] memory components = _setToken.getComponents();
        (
            uint256 sumEth,
            ,
            Exchange[] memory exchanges,
            uint256[] memory amountComponents,
        ) = _getAmountETHForIssuance(_setToken, components, _amountSetToken);

        require(sumEth <= _maxEther, "ExchangeIssuance: INSUFFICIENT_INPUT_AMOUNT");

        uint256 totalEth = 0;
        for (uint256 i = 0; i < components.length; i++) {
            uint256 amountEth = _swapTokensForExactTokens(exchanges[i], WETH, components[i], amountComponents[i]);
            totalEth = totalEth.add(amountEth);
        }
        basicIssuanceModule.issue(_setToken, _amountSetToken, msg.sender);
        return totalEth;
    }

    /**
     * Redeems a given amount of SetToken.
     *
     * @param _setToken     Address of the SetToken to be redeemed
     * @param _amount       Amount of SetToken to be redeemed
     */
    function _redeemExactSet(ISetToken _setToken, uint256 _amount) internal returns (uint256) {
        _setToken.safeTransferFrom(msg.sender, address(this), _amount);
        basicIssuanceModule.redeem(_setToken, _amount, address(this));
    }

    /**
     * Liquidates a given list of SetToken components for WETH.
     *
     * @param _components           An array containing the address of SetToken components
     * @param _amountComponents     An array containing the amount of each SetToken component
     * @param _exchanges            An array containing the exchange on which to liquidate the SetToken component
     *
     * @return                      Total amount of WETH received after liquidating all SetToken components
     */
    function _liquidateComponentsForWETH(address[] memory _components, uint256[] memory _amountComponents, Exchange[] memory _exchanges)
        internal
        returns (uint256)
    {
        uint256 sumEth = 0;
        for (uint256 i = 0; i < _components.length; i++) {
            sumEth = _exchanges[i] == Exchange.None
                ? sumEth.add(_amountComponents[i])
                : sumEth.add(_swapExactTokensForTokens(_exchanges[i], _components[i], WETH, _amountComponents[i]));
        }
        return sumEth;
    }

    /**
     * Gets the total amount of ether required for purchasing each component in a SetToken,
     * to enable the issuance of a given amount of SetTokens.
     *
     * @param _setToken             Address of the SetToken to be issued
     * @param _components           An array containing the addresses of the SetToken components
     * @param _amountSetToken       Amount of SetToken to be issued
     *
     * @return sumEth               The total amount of Ether reuired to issue the set
     * @return amountEthIn          An array containing the amount of ether to purchase each component of the SetToken
     * @return exchanges            An array containing the exchange on which to perform the purchase
     * @return amountComponents     An array containing the amount of each SetToken component required for issuing the given
     *                              amount of SetToken
     * @return pairAddresses        An array containing the pair addresses of ETH/component exchange pool
     */
    function _getAmountETHForIssuance(ISetToken _setToken, address[] memory _components, uint256 _amountSetToken)
        internal
        view
        returns (
            uint256 sumEth,
            uint256[] memory amountEthIn,
            Exchange[] memory exchanges,
            uint256[] memory amountComponents,
            address[] memory pairAddresses
        )
    {
        sumEth = 0;
        amountEthIn = new uint256[](_components.length);
        amountComponents = new uint256[](_components.length);
        exchanges = new Exchange[](_components.length);
        pairAddresses = new address[](_components.length);

        for (uint256 i = 0; i < _components.length; i++) {

            // Check that the component does not have external positions
            require(
                _setToken.getExternalPositionModules(_components[i]).length == 0,
                "ExchangeIssuance: EXTERNAL_POSITIONS_NOT_ALLOWED"
            );

            // Get minimum amount of ETH to be spent to acquire the required amount of SetToken component
            uint256 unit = uint256(_setToken.getDefaultPositionRealUnit(_components[i]));
            amountComponents[i] = uint256(unit).preciseMulCeil(_amountSetToken);

            (amountEthIn[i], exchanges[i], pairAddresses[i]) = _getMinTokenForExactToken(amountComponents[i], WETH, _components[i]);
            sumEth = sumEth.add(amountEthIn[i]);
        }
        return (sumEth, amountEthIn, exchanges, amountComponents, pairAddresses);
    }

    /**
     * Gets the total amount of ether returned from liquidating each component in a SetToken.
     *
     * @param _setToken             Address of the SetToken to be redeemed
     * @param _components           An array containing the addresses of the SetToken components
     * @param _amountSetToken       Amount of SetToken to be redeemed
     *
     * @return sumEth               The total amount of Ether that would be obtained from liquidating the SetTokens
     * @return amountComponents     An array containing the amount of SetToken component to be liquidated
     * @return exchanges            An array containing the exchange on which to liquidate the SetToken components
     */
    function _getAmountETHForRedemption(ISetToken _setToken, address[] memory _components, uint256 _amountSetToken)
        internal
        view
        returns (uint256, uint256[] memory, Exchange[] memory)
    {
        uint256 sumEth = 0;
        uint256 amountEth = 0;

        uint256[] memory amountComponents = new uint256[](_components.length);
        Exchange[] memory exchanges = new Exchange[](_components.length);

        for (uint256 i = 0; i < _components.length; i++) {

            // Check that the component does not have external positions
            require(
                _setToken.getExternalPositionModules(_components[i]).length == 0,
                "ExchangeIssuance: EXTERNAL_POSITIONS_NOT_ALLOWED"
            );

            uint256 unit = uint256(_setToken.getDefaultPositionRealUnit(_components[i]));
            amountComponents[i] = unit.preciseMul(_amountSetToken);

            // get maximum amount of ETH received for a given amount of SetToken component
            (amountEth, exchanges[i], ) = _getMaxTokenForExactToken(amountComponents[i], _components[i], WETH);
            sumEth = sumEth.add(amountEth);
        }
        return (sumEth, amountComponents, exchanges);
    }

    /**
     * Returns an estimated amount of SetToken that can be issued given an amount of input ERC20 token.
     *
     * @param _setToken             Address of the SetToken to be issued
     * @param _components           An array containing the addresses of the SetToken components
     * @param _amountEth            Total amount of ether available for the purchase of SetToken components
     *
     * @return setIssueAmount       The max amount of SetTokens that can be issued
     * @return amountEthIn          An array containing the amount ether required to purchase each SetToken component
     * @return exchanges            An array containing the exchange on which to purchase the SetToken components
     */
    function _getSetIssueAmountForETH(ISetToken _setToken, address[] memory _components, uint256 _amountEth)
        internal
        view
        returns (uint256 setIssueAmount, uint256[] memory amountEthIn, Exchange[] memory exchanges)
    {
        uint256 sumEth;
        uint256[] memory unitAmountEthIn;
        uint256[] memory unitAmountComponents;
        address[] memory pairAddresses;
        (
            sumEth,
            unitAmountEthIn,
            exchanges,
            unitAmountComponents,
            pairAddresses
        ) = _getAmountETHForIssuance(_setToken, _components, PreciseUnitMath.preciseUnit());

        setIssueAmount = PreciseUnitMath.maxUint256();
        amountEthIn = new uint256[](_components.length);

        for (uint256 i = 0; i < _components.length; i++) {

            amountEthIn[i] = unitAmountEthIn[i].mul(_amountEth).div(sumEth);

            uint256 amountComponent;
            if (exchanges[i] == Exchange.None) {
                amountComponent = amountEthIn[i];
            } else {
                (uint256 reserveIn, uint256 reserveOut) = UniSushiV2Library.getReserves(pairAddresses[i], WETH, _components[i]);
                amountComponent = UniSushiV2Library.getAmountOut(amountEthIn[i], reserveIn, reserveOut);
            }
            setIssueAmount = Math.min(amountComponent.preciseDiv(unitAmountComponents[i]), setIssueAmount);
        }
        return (setIssueAmount, amountEthIn, exchanges);
    }

    /**
     * Swaps a given amount of an ERC20 token for WETH for the best price on Uniswap/Sushiswap.
     *
     * @param _token    Address of the ERC20 token to be swapped for WETH
     * @param _amount   Amount of ERC20 token to be swapped
     *
     * @return          Amount of WETH received after the swap
     */
    function _swapTokenForWETH(IERC20 _token, uint256 _amount) internal returns (uint256) {
        (, Exchange exchange, ) = _getMaxTokenForExactToken(_amount, address(_token), WETH);
        IUniswapV2Router02 router = _getRouter(exchange);
        _safeApprove(_token, address(router), _amount);
        return _swapExactTokensForTokens(exchange, address(_token), WETH, _amount);
    }

    /**
     * Swap exact tokens for another token on a given DEX.
     *
     * @param _exchange     The exchange on which to peform the swap
     * @param _tokenIn      The address of the input token
     * @param _tokenOut     The address of the output token
     * @param _amountIn     The amount of input token to be spent
     *
     * @return              The amount of output tokens
     */
    function _swapExactTokensForTokens(Exchange _exchange, address _tokenIn, address _tokenOut, uint256 _amountIn) internal returns (uint256) {
        if (_tokenIn == _tokenOut) {
            return _amountIn;
        }
        address[] memory path = new address[](2);
        path[0] = _tokenIn;
        path[1] = _tokenOut;
        return _getRouter(_exchange).swapExactTokensForTokens(_amountIn, 0, path, address(this), block.timestamp)[1];
    }

    /**
     * Swap tokens for exact amount of output tokens on a given DEX.
     *
     * @param _exchange     The exchange on which to peform the swap
     * @param _tokenIn      The address of the input token
     * @param _tokenOut     The address of the output token
     * @param _amountOut    The amount of output token required
     *
     * @return              The amount of input tokens spent
     */
    function _swapTokensForExactTokens(Exchange _exchange, address _tokenIn, address _tokenOut, uint256 _amountOut) internal returns (uint256) {
        if (_tokenIn == _tokenOut) {
            return _amountOut;
        }
        address[] memory path = new address[](2);
        path[0] = _tokenIn;
        path[1] = _tokenOut;
        return _getRouter(_exchange).swapTokensForExactTokens(_amountOut, PreciseUnitMath.maxUint256(), path, address(this), block.timestamp)[0];
    }

    /**
     * Compares the amount of token required for an exact amount of another token across both exchanges,
     * and returns the min amount.
     *
     * @param _amountOut    The amount of output token
     * @param _tokenA       The address of tokenA
     * @param _tokenB       The address of tokenB
     *
     * @return              The min amount of tokenA required across both exchanges
     * @return              The Exchange on which minimum amount of tokenA is required
     * @return              The pair address of the uniswap/sushiswap pool containing _tokenA and _tokenB
     */
    function _getMinTokenForExactToken(uint256 _amountOut, address _tokenA, address _tokenB) internal view returns (uint256, Exchange, address) {
        if (_tokenA == _tokenB) {
            return (_amountOut, Exchange.None, ETH_ADDRESS);
        }

        uint256 maxIn = PreciseUnitMath.maxUint256() ;
        uint256 uniTokenIn = maxIn;
        uint256 sushiTokenIn = maxIn;

        address uniswapPair = _getPair(uniFactory, _tokenA, _tokenB);
        if (uniswapPair != address(0)) {
            (uint256 reserveIn, uint256 reserveOut) = UniSushiV2Library.getReserves(uniswapPair, _tokenA, _tokenB);
            // Prevent subtraction overflow by making sure pool reserves are greater than swap amount
            if (reserveOut > _amountOut) {
                uniTokenIn = UniSushiV2Library.getAmountIn(_amountOut, reserveIn, reserveOut);
            }
        }

        address sushiswapPair = _getPair(sushiFactory, _tokenA, _tokenB);
        if (sushiswapPair != address(0)) {
            (uint256 reserveIn, uint256 reserveOut) = UniSushiV2Library.getReserves(sushiswapPair, _tokenA, _tokenB);
            // Prevent subtraction overflow by making sure pool reserves are greater than swap amount
            if (reserveOut > _amountOut) {
                sushiTokenIn = UniSushiV2Library.getAmountIn(_amountOut, reserveIn, reserveOut);
            }
        }

        // Fails if both the values are maxIn
        require(!(uniTokenIn == maxIn && sushiTokenIn == maxIn), "ExchangeIssuance: ILLIQUID_SET_COMPONENT");
        return (uniTokenIn <= sushiTokenIn) ? (uniTokenIn, Exchange.Uniswap, uniswapPair) : (sushiTokenIn, Exchange.Sushiswap, sushiswapPair);
    }

    /**
     * Compares the amount of token received for an exact amount of another token across both exchanges,
     * and returns the max amount.
     *
     * @param _amountIn     The amount of input token
     * @param _tokenA       The address of tokenA
     * @param _tokenB       The address of tokenB
     *
     * @return              The max amount of tokens that can be received across both exchanges
     * @return              The Exchange on which maximum amount of token can be received
     * @return              The pair address of the uniswap/sushiswap pool containing _tokenA and _tokenB
     */
    function _getMaxTokenForExactToken(uint256 _amountIn, address _tokenA, address _tokenB) internal view returns (uint256, Exchange, address) {
        if (_tokenA == _tokenB) {
            return (_amountIn, Exchange.None, ETH_ADDRESS);
        }

        uint256 uniTokenOut = 0;
        uint256 sushiTokenOut = 0;

        address uniswapPair = _getPair(uniFactory, _tokenA, _tokenB);
        if(uniswapPair != address(0)) {
            (uint256 reserveIn, uint256 reserveOut) = UniSushiV2Library.getReserves(uniswapPair, _tokenA, _tokenB);
            uniTokenOut = UniSushiV2Library.getAmountOut(_amountIn, reserveIn, reserveOut);
        }

        address sushiswapPair = _getPair(sushiFactory, _tokenA, _tokenB);
        if(sushiswapPair != address(0)) {
            (uint256 reserveIn, uint256 reserveOut) = UniSushiV2Library.getReserves(sushiswapPair, _tokenA, _tokenB);
            sushiTokenOut = UniSushiV2Library.getAmountOut(_amountIn, reserveIn, reserveOut);
        }

        // Fails if both the values are 0
        require(!(uniTokenOut == 0 && sushiTokenOut == 0), "ExchangeIssuance: ILLIQUID_SET_COMPONENT");
        return (uniTokenOut >= sushiTokenOut) ? (uniTokenOut, Exchange.Uniswap, uniswapPair) : (sushiTokenOut, Exchange.Sushiswap, sushiswapPair);
    }

    /**
     * Returns the pair address for on a given DEX.
     *
     * @param _factory   The factory to address
     * @param _tokenA    The address of tokenA
     * @param _tokenB    The address of tokenB
     *
     * @return           The pair address (Note: address(0) is returned by default if the pair is not available on that DEX)
     */
    function _getPair(address _factory, address _tokenA, address _tokenB) internal view returns (address) {
        return IUniswapV2Factory(_factory).getPair(_tokenA, _tokenB);
    }

    /**
     * Returns the router address of a given exchange.
     *
     * @param _exchange     The Exchange whose router address is needed
     *
     * @return              IUniswapV2Router02 router of the given exchange
     */
     function _getRouter(Exchange _exchange) internal view returns(IUniswapV2Router02) {
         return (_exchange == Exchange.Uniswap) ? uniRouter : sushiRouter;
     }

}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

import { IManagerIssuanceHook } from "../interfaces/IManagerIssuanceHook.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";


/**
 * @title SupplyCapIssuanceHook
 * @author Set Protocol
 *
 * Issuance hook that checks new issuances won't push SetToken totalSupply over supply cap.
 */
contract SupplyCapIssuanceHook is Ownable, IManagerIssuanceHook {
    using SafeMath for uint256;

    /* ============ Events ============ */

    event SupplyCapUpdated(uint256 _newCap);

    /* ============ State Variables ============ */

    // Cap on totalSupply of Sets
    uint256 public supplyCap;

    /* ============ Constructor ============ */

    /**
     * Constructor, overwrites owner and original supply cap.
     *
     * @param _initialOwner     Owner address, overwrites Ownable logic which sets to deployer as default
     * @param _supplyCap        Supply cap for Set (in wei of Set)
     */
    constructor(
        address _initialOwner,
        uint256 _supplyCap
    )
        public
    {
        supplyCap = _supplyCap;

        // Overwrite _owner param of Ownable contract
        transferOwnership(_initialOwner);
    }

    /**
     * Adheres to IManagerIssuanceHook interface, and checks to make sure the current issue call won't push total supply over cap.
     */
    function invokePreIssueHook(
        ISetToken _setToken,
        uint256 _issueQuantity,
        address /*_sender*/,
        address /*_to*/
    )
        external
        override
    {
        uint256 totalSupply = _setToken.totalSupply();

        require(totalSupply.add(_issueQuantity) <= supplyCap, "Supply cap exceeded");
    }

    /**
     * Adheres to IManagerIssuanceHook interface
     */
    function invokePreRedeemHook(
        ISetToken _setToken,
        uint256 _redeemQuantity,
        address _sender,
        address _to
    )
        external
        override
    {}

    /**
     * ONLY OWNER: Updates supply cap
     */
    function updateSupplyCap(uint256 _newCap) external onlyOwner {
        supplyCap = _newCap;
        SupplyCapUpdated(_newCap);
    }
}

/*
    Copyright 2021 Index Cooperative.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

pragma solidity 0.6.10;

import { IAirdropModule } from "../interfaces/IAirdropModule.sol";
import { IManagerIssuanceHook } from "../interfaces/IManagerIssuanceHook.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";

/**
 * @title AirdropIssuanceHook
 * @author Index Coop
 *
 * Issuance hooks that absorbs all airdropped tokens. Useful for ensuring that rebasing tokens are fully accounted for before issuance. Only works
 * with tokens that strictly positively rebase such as aTokens.
 */
contract AirdropIssuanceHook is IManagerIssuanceHook {

    /* ============ State Variables ============ */

    // Address of Set Protocol AirdropModule
    IAirdropModule public airdropModule;

    /* ============== Constructor ================ */

    /**
     * Sets state variables.
     *
     * @param   _airdropModule      address of AirdropModule
     */
    constructor(IAirdropModule _airdropModule) public {
        airdropModule = _airdropModule;
    }

    /* =========== External Functions =========== */

    /**
     * Absorbs all airdropped tokens. Called by some issuance modules before issuance.
     *
     * @param   _setToken           address of SetToken to absorb airdrops for
     */
    function invokePreIssueHook(ISetToken _setToken, uint256 /* _issueQuantity */, address /* _sender */, address /* _to */) external override {
        _sync(_setToken);
    }

    /**
     * Absorbs all airdropped tokens. Called by some issuance modules before redemption.
     *
     * @param   _setToken           address of SetToken to absorb airdrops for
     */
    function invokePreRedeemHook(ISetToken _setToken, uint256 /* _issueQuantity */, address /* _sender */, address /* _to */) external override {
        _sync(_setToken);
    }

    /* =========== Internal Functions ========== */

    /**
     * Absorbs all airdropped tokens. AirdropModule must be added to an initialized for the SetToken. Must have anyoneAbsorb set to true on
     * the AirdropModule.
     *
     * @param   _setToken           address of SetToken to absorb airdrops for
     */
    function _sync(ISetToken _setToken) internal {
        address[] memory airdrops = airdropModule.getAirdrops(_setToken);
        airdropModule.batchAbsorb(_setToken, airdrops);
    }
}

/*
    Copyright 2021 Index Cooperative.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

pragma solidity 0.6.10;

import { ISetToken } from "../interfaces/ISetToken.sol";

interface IAirdropModule {

    struct AirdropSettings {
        address[] airdrops;
        address feeRecipient;
        uint256 airdropFee;
        bool anyoneAbsorb;
    }
    
    function batchAbsorb(ISetToken _setToken, address[] memory _tokens) external;
    function getAirdrops(ISetToken _setToken) external view returns (address[] memory);
}

/*
    Copyright 2021 Index Cooperative.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { BaseExtension } from "../lib/BaseExtension.sol";
import { IAirdropModule } from "../interfaces/IAirdropModule.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";

/**
 * @title AirdropExtension
 * @author Index Coop
 *
 * Manager extension for interacting with AirdropModule
 */
contract AirdropExtension is BaseExtension {

    /* ========== State Variables ========= */

    // Address of AirdropModule
    IAirdropModule public immutable airdropModule;

    // Address of Set Token
    ISetToken public immutable setToken;

    /* ============ Constructor ============ */

    /**
     * Sets state variables
     *
     * @param _manager          Manager contract
     * @param _airdropModule    Set Protocol AirdropModule
     */
    constructor(IBaseManager _manager, IAirdropModule _airdropModule) public BaseExtension(_manager) {
        airdropModule = _airdropModule;
        setToken = manager.setToken();
    }

    /* ========== External Functions ========== */

    /**
     * OPERATOR ONLY: initializes the AirdropModule. The recipient is always set to the manager and the fee to 0.
     *
     * @param _airdropSettings  Settings to initially the AirdropModule with
     */
    function initializeAirdropModule(IAirdropModule.AirdropSettings memory _airdropSettings) external onlyOperator {
        invokeManager(
            address(airdropModule),
            abi.encodeWithSignature("initialize(address,(address[],address,uint256,bool))", setToken, _airdropSettings)
        );
    }

    /**
     * OPERATOR ONLY: absorbs airdropped tokens
     *
     * @param _token    Airdropped token to absorb
     */
    function absorb(address _token) external onlyAllowedCaller(msg.sender) {
        invokeManager(
            address(airdropModule),
            abi.encodeWithSignature("absorb(address,address)", setToken, _token)
        );
    }

    /**
     * OPERATOR ONLY: batch absorbs airdropped tokens
     *
     * @param _tokens   List of airdropped tokens to absorb
     */
    function batchAbsorb(address[] memory _tokens) external onlyAllowedCaller(msg.sender) {
        invokeManager(
            address(airdropModule),
            abi.encodeWithSignature("batchAbsorb(address,address[])", setToken, _tokens)
        );
    }

    /**
     * OPERATOR ONLY: adds a new airdrop token
     *
     * @param _token    Airdropped token to add
     */
    function addAirdrop(address _token) external onlyOperator {
        invokeManager(
            address(airdropModule),
            abi.encodeWithSignature("addAirdrop(address,address)", setToken, _token)
        );
    }

    /**
     * OPERATOR ONLY: removes a new airdrop token
     *
     * @param _token    Airdropped token to remove
     */
    function removeAirdrop(address _token) external onlyOperator {
        invokeManager(
            address(airdropModule),
            abi.encodeWithSignature("removeAirdrop(address,address)", setToken, _token)
        );
    }

    /**
     * OPERATOR ONLY: updates the anyoneAbsorb setting
     *
     * @param _anyoneAbsorb     new anyoneAbsorb setting value
     */
    function updateAnyoneAbsorb(bool _anyoneAbsorb) external onlyOperator {
        invokeManager(
            address(airdropModule),
            abi.encodeWithSignature("updateAnyoneAbsorb(address,bool)", setToken, _anyoneAbsorb)
        );
    }
}

/*
    Copyright 2021 IndexCooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

import { AddressArrayUtils } from "../lib/AddressArrayUtils.sol";
import { BaseExtension } from "../lib/BaseExtension.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";
import { IGeneralIndexModule } from "../interfaces/IGeneralIndexModule.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";

/**
 * @title GIMExtension
 * @author Set Protocol
 *
 * Smart contract manager extension that acts as a pass-through contract for interacting with GeneralIndexModule.
 * All functions are only callable by operator. startRebalance() on GIM maps to startRebalanceWithUnits on
 * GIMExtension.
 */
contract GIMExtension is BaseExtension {

    using AddressArrayUtils for address[];
    using SafeMath for uint256;

    /* ============ State Variables ============ */

    ISetToken public setToken;
    IGeneralIndexModule public generalIndexModule;  // GIM

    /* ============ Constructor ============ */

    constructor(IBaseManager _manager, IGeneralIndexModule _generalIndexModule) public BaseExtension(_manager) {
        generalIndexModule = _generalIndexModule;
        setToken = manager.setToken();
    }

    /* ============ External Functions ============ */

    /**
     * ONLY OPERATOR: Submits a startRebalance call to GeneralIndexModule. Uses internal function so that this contract can be inherited and
     * custom startRebalance logic can be added on top. Components array is sorted in new and old components arrays in order to conform to
     * startRebalance interface. See GIM for function specific restrictions.
     * @param _components               Array of components involved in rebalance inclusive of components being removed from set (targetUnit = 0)
     * @param _targetUnits              Array of target units at end of rebalance, maps to same index of _components array
     * @param _positionMultiplier       Position multiplier when target units were calculated, needed in order to adjust target units if fees accrued
     */
    function startRebalanceWithUnits(
        address[] calldata _components,
        uint256[] calldata _targetUnits,
        uint256 _positionMultiplier
    )
        external
        onlyOperator
    {
        (
            address[] memory newComponents,
            uint256[] memory newComponentsTargetUnits,
            uint256[] memory oldComponentsTargetUnits
        ) = _sortNewAndOldComponents(_components, _targetUnits);
        _startRebalance(newComponents, newComponentsTargetUnits, oldComponentsTargetUnits, _positionMultiplier);
    }

    /**
     * ONLY OPERATOR: Submits a setTradeMaximums call to GeneralIndexModule. See GIM for function specific restrictions.
     *
     * @param _components           Array of components
     * @param _tradeMaximums        Array of trade maximums mapping to correct component
     */
    function setTradeMaximums(
        address[] memory _components,
        uint256[] memory _tradeMaximums
    )
        external
        onlyOperator
    {
        bytes memory callData = abi.encodeWithSelector(
            IGeneralIndexModule.setTradeMaximums.selector,
            setToken,
            _components,
            _tradeMaximums
        );

        invokeManager(address(generalIndexModule), callData);
    }

    /**
     * ONLY OPERATOR: Submits a setExchanges call to GeneralIndexModule. See GIM for function specific restrictions.
     *
     * @param _components           Array of components
     * @param _exchangeNames        Array of exchange names mapping to correct component
     */
    function setExchanges(
        address[] memory _components,
        string[] memory _exchangeNames
    )
        external
        onlyOperator
    {
        bytes memory callData = abi.encodeWithSelector(
            IGeneralIndexModule.setExchanges.selector,
            setToken,
            _components,
            _exchangeNames
        );

        invokeManager(address(generalIndexModule), callData);
    }

    /**
     * ONLY OPERATOR: Submits a setCoolOffPeriods call to GeneralIndexModule. See GIM for function specific restrictions.
     *
     * @param _components           Array of components
     * @param _coolOffPeriods       Array of cool off periods to correct component
     */
    function setCoolOffPeriods(
        address[] memory _components,
        uint256[] memory _coolOffPeriods
    )
        external
        onlyOperator
    {
        bytes memory callData = abi.encodeWithSelector(
            IGeneralIndexModule.setCoolOffPeriods.selector,
            setToken,
            _components,
            _coolOffPeriods
        );

        invokeManager(address(generalIndexModule), callData);
    }

    /**
     * ONLY OPERATOR: Submits a setExchangeData call to GeneralIndexModule. See GIM for function specific restrictions.
     *
     * @param _components           Array of components
     * @param _exchangeData         Array of exchange specific arbitrary bytes data
     */
    function setExchangeData(
        address[] memory _components,
        bytes[] memory _exchangeData
    )
        external
        onlyOperator
    {
        bytes memory callData = abi.encodeWithSelector(
            IGeneralIndexModule.setExchangeData.selector,
            setToken,
            _components,
            _exchangeData
        );

        invokeManager(address(generalIndexModule), callData);
    }

    /**
     * ONLY OPERATOR: Submits a setRaiseTargetPercentage call to GeneralIndexModule. See GIM for function specific restrictions.
     *
     * @param _raiseTargetPercentage        Amount to raise all component's unit targets by (in precise units)
     */
    function setRaiseTargetPercentage(uint256 _raiseTargetPercentage) external onlyOperator {
        bytes memory callData = abi.encodeWithSelector(
            IGeneralIndexModule.setRaiseTargetPercentage.selector,
            setToken,
            _raiseTargetPercentage
        );

        invokeManager(address(generalIndexModule), callData);
    }

    /**
     * ONLY OPERATOR: Submits a setTraderStatus call to GeneralIndexModule. See GIM for function specific restrictions.
     *
     * @param _traders           Array trader addresses to toggle status
     * @param _statuses          Booleans indicating if matching trader can trade
     */
    function setTraderStatus(
        address[] memory _traders,
        bool[] memory _statuses
    )
        external
        onlyOperator
    {
        bytes memory callData = abi.encodeWithSelector(
            IGeneralIndexModule.setTraderStatus.selector,
            setToken,
            _traders,
            _statuses
        );

        invokeManager(address(generalIndexModule), callData);
    }

    /**
     * ONLY OPERATOR: Submits a setAnyoneTrade call to GeneralIndexModule. See GIM for function specific restrictions.
     *
     * @param _status          Boolean indicating if anyone can call trade
     */
    function setAnyoneTrade(bool _status) external onlyOperator {
        bytes memory callData = abi.encodeWithSelector(
            IGeneralIndexModule.setAnyoneTrade.selector,
            setToken,
            _status
        );

        invokeManager(address(generalIndexModule), callData);
    }

    /**
     * ONLY OPERATOR: Submits a initialize call to GeneralIndexModule. See GIM for function specific restrictions.
     */
    function initialize() external onlyOperator {
        bytes memory callData = abi.encodeWithSelector(
            IGeneralIndexModule.initialize.selector,
            setToken
        );

        invokeManager(address(generalIndexModule), callData);
    }

    /* ============ Internal Functions ============ */

    /**
     * Internal function that creates calldata and submits startRebalance call to GeneralIndexModule.
     *
     * @param _newComponents                    Array of new components to add to allocation
     * @param _newComponentsTargetUnits         Array of target units at end of rebalance for new components, maps to same index of _newComponents array
     * @param _oldComponentsTargetUnits         Array of target units at end of rebalance for old component, maps to same index of
     *                                               _setToken.getComponents() array, if component being removed set to 0.
     * @param _positionMultiplier               Position multiplier when target units were calculated, needed in order to adjust target units
     *                                               if fees accrued
     */
    function _startRebalance(
        address[] memory _newComponents,
        uint256[] memory _newComponentsTargetUnits,
        uint256[] memory _oldComponentsTargetUnits,
        uint256 _positionMultiplier
    )
        internal
    {
        bytes memory callData = abi.encodeWithSelector(
            IGeneralIndexModule.startRebalance.selector,
            setToken,
            _newComponents,
            _newComponentsTargetUnits,
            _oldComponentsTargetUnits,
            _positionMultiplier
        );

        invokeManager(address(generalIndexModule), callData);
    }

    /**
     * Internal function that sorts components into old and new components and builds the requisite target unit arrays. Old components target units
     * MUST maintain the order of the components array on the SetToken. The _components array MUST contain an entry for all current components even if
     * component is being removed (targetUnit = 0). This is validated implicitly by calculating the amount of new components that would be added as
     * implied by the array lengths, if more than the expected amount of new components are added then it implies an old component is missing.
     *
     * @param _components          Array of components involved in rebalance inclusive of components being removed from set (targetUnit = 0)
     * @param _targetUnits         Array of target units at end of rebalance, maps to same index of _components array
     */
    function _sortNewAndOldComponents(
        address[] memory _components,
        uint256[] memory _targetUnits
    )
        internal
        view
        returns (address[] memory, uint256[] memory, uint256[] memory)
    {
        address[] memory currentComponents = setToken.getComponents();

        uint256 currentSetComponentsLength = currentComponents.length;
        uint256 rebalanceComponentsLength = _components.length;

        require(rebalanceComponentsLength >= currentSetComponentsLength, "Components array must be equal or longer than current components");

        // We assume that there is an entry for each old component regardless of if it's 0, so any additional components in the array
        // must be added as a new component. Hence we can declare the length of the new components array as the difference between
        // rebalanceComponentsLength and currentSetComponentsLength
        uint256[] memory oldComponentsTargetUnits = new uint256[](currentSetComponentsLength);
        address[] memory newComponents = new address[](rebalanceComponentsLength.sub(currentSetComponentsLength));
        uint256[] memory newTargetUnits = new uint256[](rebalanceComponentsLength.sub(currentSetComponentsLength));

        uint256 newCounter;     // Count amount of components added to newComponents array to add new components to next index
        for (uint256 i = 0; i < rebalanceComponentsLength; i++) {
            address component = _components[i];
            (uint256 index, bool isIn) = currentComponents.indexOf(component);

            if (isIn) {
                oldComponentsTargetUnits[index] = _targetUnits[i];  // Use index in order to map to correct component in currentComponents array
            } else {
                require(newCounter < newComponents.length, "Unexpected new component added");
                newComponents[newCounter] = component;
                newTargetUnits[newCounter] = _targetUnits[i];
                newCounter = newCounter.add(1);
            }
        }

        return (newComponents, newTargetUnits, oldComponentsTargetUnits);
    }
}

/*
    Copyright 2020 Set Labs Inc.
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;
pragma experimental "ABIEncoderV2";

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

import { ISetToken } from "./ISetToken.sol";

interface IGeneralIndexModule {
    function startRebalance(
        ISetToken _setToken,
        address[] calldata _newComponents,
        uint256[] calldata _newComponentsTargetUnits,
        uint256[] calldata _oldComponentsTargetUnits,
        uint256 _positionMultiplier
    )
        external;
    
    function trade(
        ISetToken _setToken,
        IERC20 _component,
        uint256 _ethQuantityLimit
    )
        external;

    function tradeRemainingWETH(
        ISetToken _setToken,
        IERC20 _component,
        uint256 _minComponentReceived
    )
        external;
    
    function raiseAssetTargets(ISetToken _setToken) external;

    function setTradeMaximums(
        ISetToken _setToken,
        address[] memory _components,
        uint256[] memory _tradeMaximums
    )
        external;
    
    function setExchanges(
        ISetToken _setToken,
        address[] memory _components,
        string[] memory _exchangeNames
    )
        external;

    function setCoolOffPeriods(
        ISetToken _setToken,
        address[] memory _components,
        uint256[] memory _coolOffPeriods
    )
        external;

    function setExchangeData(
        ISetToken _setToken,
        address[] memory _components,
        bytes[] memory _exchangeData
    )
        external;

    function setRaiseTargetPercentage(ISetToken _setToken, uint256 _raiseTargetPercentage) external;

    function setTraderStatus(
        ISetToken _setToken,
        address[] memory _traders,
        bool[] memory _statuses
    )
        external;

    function setAnyoneTrade(ISetToken _setToken, bool _status) external;
    function initialize(ISetToken _setToken) external;
}

/*
    Copyright 2021 Index Coop

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { BaseExtension } from "../lib/BaseExtension.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";
import { IWrapModule } from "../interfaces/IWrapModule.sol";

/**
 * @title WrapExtension
 * @author Index Coop
 *
 * Manager extension for interacting with WrapModule
 */
contract WrapExtension is BaseExtension {

    /* ========== State Variables ========= */

    // Address of Set Token
    ISetToken public immutable setToken;

    // Address of WrapModule
    IWrapModule public immutable wrapModule;

    /* ============ Constructor ============ */

    /**
     * Sets state variables
     *
     * @param _manager          Manager contract
     * @param _wrapModule       Set Protocol WrapModule
     */
    constructor(IBaseManager _manager, IWrapModule _wrapModule) public BaseExtension(_manager) {
        manager = _manager;
        setToken = manager.setToken();
        wrapModule = _wrapModule;
    }

    /* ========== External Functions ========== */

    /**
     * OPERATOR ONLY: Initializes the Set Token on the Wrap Module.
     */
    function initialize() external onlyOperator {
        bytes memory data = abi.encodeWithSelector(wrapModule.initialize.selector, setToken);
        invokeManager(address(wrapModule), data);
    }

    /**
     * OPERATOR ONLY: Calls wrap on the WrapModule.
     *
     * @param _underlyingToken  address of underlying token
     * @param _wrappedToken     address of wrapped token
     * @param _underlyingUnits  units of underlying to wrap
     * @param _integrationName  Set Protocol integreation name for the wrap adapter
     */
    function wrap(
        address _underlyingToken,
        address _wrappedToken,
        uint256 _underlyingUnits,
        string calldata _integrationName
    )
        external
        onlyOperator
    {
        bytes memory data = abi.encodeWithSelector(
            wrapModule.wrap.selector,
            setToken,
            _underlyingToken,
            _wrappedToken,
            _underlyingUnits,
            _integrationName
        );
        invokeManager(address(wrapModule), data);
    }

    /**
     * OPERATOR ONLY: Calls wrapWithEther on the WrapModule.
     *
     * @param _wrappedToken     address of wrapped token
     * @param _underlyingUnits  units of weth to wrap
     * @param _integrationName  Set Protocol integreation name for the wrap adapter
     */
    function wrapWithEther(
        address _wrappedToken,
        uint256 _underlyingUnits,
        string calldata _integrationName
    )
        external
        onlyOperator
    {
        bytes memory data = abi.encodeWithSelector(
            wrapModule.wrapWithEther.selector,
            setToken,
            _wrappedToken,
            _underlyingUnits,
            _integrationName
        );
        invokeManager(address(wrapModule), data);
    }

    /**
     * OPERATOR ONLY: Calls unwrap on the WrapModule.
     *
     * @param _underlyingToken  address of underlying token
     * @param _wrappedToken     address of wrapped token
     * @param _wrappedUnits     units of wrapped token to unwrap
     * @param _integrationName  Set Protocol integreation name for the wrap adapter
     */
    function unwrap(
        address _underlyingToken,
        address _wrappedToken,
        uint256 _wrappedUnits,
        string calldata _integrationName
    )
        external
        onlyOperator
    {
        bytes memory data = abi.encodeWithSelector(
            wrapModule.unwrap.selector,
            setToken,
            _underlyingToken,
            _wrappedToken,
            _wrappedUnits,
            _integrationName
        );
        invokeManager(address(wrapModule), data);
    }

    /**
     * OPERATOR ONLY: Calls unwrapWithEther on the WrapModule.
     *
     * @param _wrappedToken     address of wrapped token
     * @param _wrappedUnits     units of wrapped token to unwrap
     * @param _integrationName  Set Protocol integreation name for the wrap adapter
     */
    function unwrapWithEther(
        address _wrappedToken,
        uint256 _wrappedUnits,
        string calldata _integrationName
    )
        external
        onlyOperator
    {
        bytes memory data = abi.encodeWithSelector(
            wrapModule.unwrapWithEther.selector,
            setToken,
            _wrappedToken,
            _wrappedUnits,
            _integrationName
        );
        invokeManager(address(wrapModule), data);
    }
}

/*
    Copyright 2021 Index Coop.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

import { ISetToken } from "./ISetToken.sol";

pragma solidity 0.6.10;

interface IWrapModule {

    function initialize(ISetToken _setToken) external;

    function wrap(
        ISetToken _setToken,
        address _underlyingToken,
        address _wrappedToken,
        uint256 _underlyingUnits,
        string calldata _integrationName
    ) external;

    function wrapWithEther(
        ISetToken _setToken,
        address _wrappedToken,
        uint256 _underlyingUnits,
        string calldata _integrationName
    ) external;

    function unwrap(
        ISetToken _setToken,
        address _underlyingToken,
        address _wrappedToken,
        uint256 _wrappedUnits,
        string calldata _integrationName
    ) external;

    function unwrapWithEther(
        ISetToken _setToken,
        address _wrappedToken,
        uint256 _wrappedUnits,
        string calldata _integrationName
    ) external;
}

/*
    Copyright 2021 IndexCooperative

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { BaseExtension } from "../lib/BaseExtension.sol";
import { IBaseManager } from "../interfaces/IBaseManager.sol";
import { IGovernanceModule } from "../interfaces/IGovernanceModule.sol";
import { ISetToken } from "../interfaces/ISetToken.sol";

/**
 * @title GovernanceExtension
 * @author Set Protocol
 *
 * Smart contract extension that acts as a manager interface for interacting with the Set Protocol
 * GovernanceModule to perform meta-governance actions. All governance functions are callable only
 * by a subset of allowed callers. The operator has the power to add/remove callers from the allowed
 * callers mapping.
 */
contract GovernanceExtension is BaseExtension {

    /* ============ State Variables ============ */

    ISetToken public setToken;
    IGovernanceModule public governanceModule;

    /* ============ Constructor ============ */

    constructor(IBaseManager _manager, IGovernanceModule _governanceModule) public BaseExtension(_manager) {
        governanceModule = _governanceModule;
        setToken = manager.setToken();
    }

    /* ============ External Functions ============ */

    /**
     * ONLY APPROVED CALLER: Submits a delegate call to the GovernanceModule. Approved caller mapping
     * is part of BaseExtension.
     *
     * @param _governanceName       Name of governance extension being used
     */
    function delegate(
        string memory _governanceName,
        address _delegatee
    )
        external
        onlyAllowedCaller(msg.sender)
    {
        bytes memory callData = abi.encodeWithSelector(
            IGovernanceModule.delegate.selector,
            setToken,
            _governanceName,
            _delegatee
        );

        invokeManager(address(governanceModule), callData);
    }

    /**
     * ONLY APPROVED CALLER: Submits a proposal call to the GovernanceModule. Approved caller mapping
     * is part of BaseExtension.
     *
     * @param _governanceName       Name of governance extension being used
     * @param _proposalData         Byte data of proposal
     */
    function propose(
        string memory _governanceName,
        bytes memory _proposalData
    )
        external
        onlyAllowedCaller(msg.sender)
    {
        bytes memory callData = abi.encodeWithSelector(
            IGovernanceModule.propose.selector,
            setToken,
            _governanceName,
            _proposalData
        );

        invokeManager(address(governanceModule), callData);
    }

    /**
     * ONLY APPROVED CALLER: Submits a register call to the GovernanceModule. Approved caller mapping
     * is part of BaseExtension.
     *
     * @param _governanceName       Name of governance extension being used
     */
    function register(string memory _governanceName) external onlyAllowedCaller(msg.sender) {
        bytes memory callData = abi.encodeWithSelector(
            IGovernanceModule.register.selector,
            setToken,
            _governanceName
        );

        invokeManager(address(governanceModule), callData);
    }

    /**
     * ONLY APPROVED CALLER: Submits a revoke call to the GovernanceModule. Approved caller mapping
     * is part of BaseExtension.
     *
     * @param _governanceName       Name of governance extension being used
     */
    function revoke(string memory _governanceName) external onlyAllowedCaller(msg.sender) {
        bytes memory callData = abi.encodeWithSelector(
            IGovernanceModule.revoke.selector,
            setToken,
            _governanceName
        );

        invokeManager(address(governanceModule), callData);
    }

    /**
     * ONLY APPROVED CALLER: Submits a vote call to the GovernanceModule. Approved caller mapping
     * is part of BaseExtension.
     *
     * @param _governanceName       Name of governance extension being used
     * @param _proposalId           Id of proposal being voted on
     * @param _support              Boolean indicating if supporting proposal
     * @param _data                 Arbitrary bytes to be used to construct vote call data
     */
    function vote(
        string memory _governanceName,
        uint256 _proposalId,
        bool _support,
        bytes memory _data
    )
        external
        onlyAllowedCaller(msg.sender)
    {
        bytes memory callData = abi.encodeWithSelector(
            IGovernanceModule.vote.selector,
            setToken,
            _governanceName,
            _proposalId,
            _support,
            _data
        );

        invokeManager(address(governanceModule), callData);
    }

    /**
     * ONLY OPERATOR: Initialize GovernanceModule for Set
     */
    function initialize() external onlyOperator {
        bytes memory callData = abi.encodeWithSelector(
            IGovernanceModule.initialize.selector,
            setToken
        );

        invokeManager(address(governanceModule), callData);
    }
}

/*
    Copyright 2020 Set Labs Inc.
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    SPDX-License-Identifier: Apache License, Version 2.0
*/
pragma solidity 0.6.10;

import { ISetToken } from "./ISetToken.sol";

interface IGovernanceModule {
    function delegate(ISetToken _setToken, string memory _governanceName, address _delegatee) external;
    function propose(ISetToken _setToken, string memory _governanceName, bytes memory _proposalData) external;
    function register(ISetToken _setToken, string memory _governanceName) external;
    function revoke(ISetToken _setToken, string memory _governanceName) external;
    function vote(
        ISetToken _setToken,
        string memory _governanceName,
        uint256 _proposalId,
        bool _support,
        bytes memory _data
    )
        external;
    function initialize(ISetToken _setToken) external;
}

/*
    Copyright 2022 Index Cooperative.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { Address } from "@openzeppelin/contracts/utils/Address.sol";
import { KeeperCompatibleInterface } from "@chainlink/contracts/src/v0.6/KeeperCompatible.sol";
import { IFlexibleLeverageStrategyExtension } from "../interfaces/IFlexibleLeverageStrategyExtension.sol";

/**
 * @title RebalanceKeeper
 * @author Index Cooperative
 * 
 * Chainlink Keeper which automatically rebalances FLI SetTokens.
 */
contract FliRebalanceKeeper is Ownable, KeeperCompatibleInterface {

    using Address for address;

    /* ============ Structs ============ */

    struct LeverageSettings {
        uint256 customMinLeverageRatio;                             // The minimum leverage ratio
        uint256 customMaxLeverageRatio;                             // The maximum leverage ratio
    }

    /* ============ Modifiers ============ */

    modifier onlyRegistry() {
        require(msg.sender == registryAddress, "Only registry address can call this function");
        _;
    }

    /* ============ State Variables ============ */

    IFlexibleLeverageStrategyExtension public fliExtension;         // Address of the fli extension contract
    address public registryAddress;                                 // Address of the chainlink keeper registry
    uint256 public exchangeIndex;                                   // The index of the exchange to use
    LeverageSettings public leverageSettings;                       // The leverage settings to check whether should rebalance

    /* ============ Constructor ============ */

    constructor(
        IFlexibleLeverageStrategyExtension _fliExtension,
        address _registryAddress,
        uint256 _exchangeIndex,
        LeverageSettings memory _leverageSettings
    ) public {
        fliExtension = _fliExtension;
        registryAddress = _registryAddress;
        exchangeIndex = _exchangeIndex;
        leverageSettings = _leverageSettings;
    }    

    /**
     * As checkUpkeep is not a view function, calling this function will actually consume gas.
     * As such if a keeper calls this function, it will always return true so that performUpkeep will be called.
     */    
    function checkUpkeep(bytes calldata /* checkData */) external override returns (bool, bytes memory) {
        (string[] memory exchangeNames, IFlexibleLeverageStrategyExtension.ShouldRebalance[] memory shouldRebalances) = fliExtension.shouldRebalanceWithBounds(
            leverageSettings.customMinLeverageRatio,
            leverageSettings.customMaxLeverageRatio
        );
        IFlexibleLeverageStrategyExtension.ShouldRebalance shouldRebalance = shouldRebalances[exchangeIndex];
        bytes memory performData = abi.encode(shouldRebalance, exchangeNames[exchangeIndex]);
        return (shouldRebalance != IFlexibleLeverageStrategyExtension.ShouldRebalance.NONE, performData);
    }

    /**
     * performUpkeep checks that a rebalance is required. Otherwise the contract call will revert.
     */
    function performUpkeep(bytes calldata performData) external override onlyRegistry {
        require(performData.length > 0, "Invalid performData");
        (IFlexibleLeverageStrategyExtension.ShouldRebalance shouldRebalance, string memory exchangeName) = abi.decode(
            performData,
            (IFlexibleLeverageStrategyExtension.ShouldRebalance, string)
        );
        if (shouldRebalance == IFlexibleLeverageStrategyExtension.ShouldRebalance.REBALANCE) {
            fliExtension.rebalance(exchangeName);
            return;
        } else if (shouldRebalance == IFlexibleLeverageStrategyExtension.ShouldRebalance.ITERATE_REBALANCE) {
            fliExtension.iterateRebalance(exchangeName);
            return;
        } else if (shouldRebalance == IFlexibleLeverageStrategyExtension.ShouldRebalance.RIPCORD) {
            fliExtension.ripcord(exchangeName);
            return;
        }
        revert("FliRebalanceKeeper: invalid shouldRebalance or no rebalance required");
    }
    function setExchangeIndex(uint256 _exchangeIndex) external onlyOwner {
        exchangeIndex = _exchangeIndex;
    }

    function setLeverageSettings(LeverageSettings memory _leverageSettings) external onlyOwner {
        leverageSettings = _leverageSettings;
    }
}

/*
    Copyright 2022 Index Cooperative.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

interface IFlexibleLeverageStrategyExtension {
    enum ShouldRebalance {
        NONE,                   // Indicates no rebalance action can be taken
        REBALANCE,              // Indicates rebalance() function can be successfully called
        ITERATE_REBALANCE,      // Indicates iterateRebalance() function can be successfully called
        RIPCORD                 // Indicates ripcord() function can be successfully called
    }

    function shouldRebalance() external view returns (string[] memory, ShouldRebalance[] memory);
    function rebalance(string memory _exchangeName) external;
    function iterateRebalance(string memory _exchageName) external;
    function ripcord(string memory _exchangeName) external;
    function shouldRebalanceWithBounds(uint256 _customMinLeverageRatio, uint256 _customMaxLeverageRatio) external view returns (string[] memory, ShouldRebalance[] memory);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;

import "./KeeperBase.sol";
import "./interfaces/KeeperCompatibleInterface.sol";

abstract contract KeeperCompatible is KeeperBase, KeeperCompatibleInterface {}

// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;

contract KeeperBase {
  /**
   * @notice method that allows it to be simulated via eth_call by checking that
   * the sender is the zero address.
   */
  function preventExecution() internal view {
    require(tx.origin == address(0), "only for simulated backend");
  }

  /**
   * @notice modifier that allows it to be simulated via eth_call by checking
   * that the sender is the zero address.
   */
  modifier cannotExecute() {
    preventExecution();
    _;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;

interface KeeperCompatibleInterface {

  /**
   * @notice method that is simulated by the keepers to see if any work actually
   * needs to be performed. This method does does not actually need to be
   * executable, and since it is only ever simulated it can consume lots of gas.
   * @dev To ensure that it is never called, you may want to add the
   * cannotExecute modifier from KeeperBase to your implementation of this
   * method.
   * @param checkData specified in the upkeep registration so it is always the
   * same for a registered upkeep. This can easily be broken down into specific
   * arguments using `abi.decode`, so multiple upkeeps can be registered on the
   * same contract and easily differentiated by the contract.
   * @return upkeepNeeded boolean to indicate whether the keeper should call
   * performUpkeep or not.
   * @return performData bytes that the keeper should call performUpkeep with, if
   * upkeep is needed. If you would like to encode data to decode later, try
   * `abi.encode`.
   */
  function checkUpkeep(
    bytes calldata checkData
  )
    external
    returns (
      bool upkeepNeeded,
      bytes memory performData
    );

  /**
   * @notice method that is actually executed by the keepers, via the registry.
   * The data returned by the checkUpkeep simulation will be passed into
   * this method to actually be executed.
   * @dev The input to this method should not be trusted, and the caller of the
   * method should not even be restricted to any single registry. Anyone should
   * be able call it, and the input should be validated, there is no guarantee
   * that the data passed in is the performData returned from checkUpkeep. This
   * could happen due to malicious keepers, racing keepers, or simply a state
   * change while the performUpkeep transaction is waiting for confirmation.
   * Always validate the data passed in.
   * @param performData is the data which was passed back from the checkData
   * simulation. If it is encoded, it can easily be decoded into other types by
   * calling `abi.decode`. This data should not be trusted, and should be
   * validated against the contract's current state.
   */
  function performUpkeep(
    bytes calldata performData
  ) external;
}

/*
    Copyright 2021 Index Coop.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import { ERC20 } from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

contract WrapAdapterMock is ERC20 {
    constructor(address _owner, uint256 _initAmount) public ERC20("Wrapped Token", "WTOKEN") {
        _mint(_owner, _initAmount);
    }

    /* ========= Wrapped Token Functions ========== */

    function mint(IERC20 _underlying, uint256 _amount) external {
        _underlying.transferFrom(msg.sender, address(this), _amount);
        _mint(msg.sender, _amount);
    }

    function mintWithEther(uint256 _amount) external payable {
        require(msg.value == _amount, "msg.value to low");
        _mint(msg.sender, _amount);
    }

    function burn(IERC20 _underlying, uint256 _amount) external {
        _burn(msg.sender, _amount);
        _underlying.transfer(msg.sender, _amount);
    }

    function burnWithEther(uint256 _amount) external {
        _burn(msg.sender, _amount);
        msg.sender.transfer(_amount);
    }

    receive() external payable {}

    /* ========= Wrap Adapter Functions =========== */

    address public constant ETH_TOKEN_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;

    function getWrapCallData(
        address _underlyingToken,
        address /* _wrappedToken */,
        uint256 _underlyingUnits
    )
        external
        view
        returns (address _subject, uint256 _value, bytes memory _calldata)
    {
        if (_underlyingToken == ETH_TOKEN_ADDRESS) {
            bytes memory data = abi.encodeWithSelector(this.mintWithEther.selector, _underlyingUnits);
            return (address(this), _underlyingUnits, data);
        } else {
            bytes memory data = abi.encodeWithSelector(this.mint.selector, _underlyingToken, _underlyingUnits);
            return (address(this), 0, data);
        }
    }

    function getUnwrapCallData(
        address _underlyingToken,
        address /* _wrappedToken */,
        uint256 _wrappedTokenUnits
    )
        external
        view
        returns
        (address _subject, uint256 _value, bytes memory _calldata)
    {
        if (_underlyingToken == ETH_TOKEN_ADDRESS) {
            bytes memory data = abi.encodeWithSelector(this.burnWithEther.selector, _wrappedTokenUnits);
            return (address(this), 0, data);
        } else {
            bytes memory data = abi.encodeWithSelector(this.burn.selector, _underlyingToken, _wrappedTokenUnits);
            return (address(this), 0, data);
        }
    }

    function getSpenderAddress(
        address /* underlyingToken */,
        address /* _wrappedToken */
    )
        external
        view
        returns(address) 
    {
        return address(this);
    }
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;
pragma experimental ABIEncoderV2;

import { ERC20 } from "@openzeppelin/contracts/token/ERC20/ERC20.sol";

/**
 * Trade Adapter that doubles as a mock exchange
 */
contract TradeAdapterMock {

    /* ============ Helper Functions ============ */

    function withdraw(address _token)
        external
    {
        uint256 balance = ERC20(_token).balanceOf(address(this));
        require(ERC20(_token).transfer(msg.sender, balance), "ERC20 transfer failed");
    }

    /* ============ Trade Functions ============ */

    function trade(
        address _sourceToken,
        address _destinationToken,
        address _destinationAddress,
        uint256 _sourceQuantity,
        uint256 /* _minDestinationQuantity */
    )
        external
    {
        uint256 destinationBalance = ERC20(_destinationToken).balanceOf(address(this));
        require(ERC20(_sourceToken).transferFrom(_destinationAddress, address(this), _sourceQuantity), "ERC20 TransferFrom failed");
        require(ERC20(_destinationToken).transfer(_destinationAddress, destinationBalance), "ERC20 transfer failed");
    }

    /* ============ Adapter Functions ============ */

    function getSpender()
        external
        view
        returns (address)
    {
        return address(this);
    }

    function getTradeCalldata(
        address _sourceToken,
        address _destinationToken,
        address _destinationAddress,
        uint256 _sourceQuantity,
        uint256 _minDestinationQuantity,
        bytes memory /* _data */
    )
        external
        view
        returns (address, uint256, bytes memory)
    {
        // Encode method data for SetToken to invoke
        bytes memory methodData = abi.encodeWithSignature(
            "trade(address,address,address,uint256,uint256)",
            _sourceToken,
            _destinationToken,
            _destinationAddress,
            _sourceQuantity,
            _minDestinationQuantity
        );

        return (address(this), 0, methodData);
    }
}

/*
    Copyright 2021 Set Labs Inc.

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

    SPDX-License-Identifier: Apache License, Version 2.0
*/

pragma solidity 0.6.10;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";

// mock class using BasicToken
contract StandardTokenMock is ERC20 {
    constructor(
        address _initialAccount,
        uint256 _initialBalance,
        string memory _name,
        string memory _symbol,
        uint8 _decimals
    )
        public
        ERC20(_name, _symbol)
    {
        _mint(_initialAccount, _initialBalance);
        _setupDecimals(_decimals);
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";

/// @title A vesting contract for full time contributors
/// @author 0xModene
/// @notice You can use this contract to set up vesting for full time DAO contributors
/// @dev All function calls are currently implemented without side effects
contract FTCVesting {
    using SafeMath for uint256;

    address public index;
    address public recipient;
    address public treasury;

    uint256 public vestingAmount;
    uint256 public vestingBegin;
    uint256 public vestingCliff;
    uint256 public vestingEnd;

    uint256 public lastUpdate;

    constructor(
        address index_,
        address recipient_,
        address treasury_,
        uint256 vestingAmount_,
        uint256 vestingBegin_,
        uint256 vestingCliff_,
        uint256 vestingEnd_
    ) public {
        require(vestingCliff_ >= vestingBegin_, "FTCVester.constructor: cliff is too early");
        require(vestingEnd_ > vestingCliff_, "FTCVester.constructor: end is too early");

        index = index_;
        recipient = recipient_;
        treasury = treasury_;

        vestingAmount = vestingAmount_;
        vestingBegin = vestingBegin_;
        vestingCliff = vestingCliff_;
        vestingEnd = vestingEnd_;

        lastUpdate = vestingBegin;
    }

    modifier onlyTreasury {
        require(msg.sender == treasury, "FTCVester.onlyTreasury: unauthorized");
        _;
    }

    modifier onlyRecipient {
        require(msg.sender == recipient, "FTCVester.onlyRecipient: unauthorized");
        _;
    }

    modifier overCliff {
        require(block.timestamp >= vestingCliff, "FTCVester.overCliff: cliff not reached");
        _;
    }

    /// @notice Sets new recipient address
    /// @param recipient_ new recipient address
    function setRecipient(address recipient_) external onlyRecipient {
        recipient = recipient_;
    }

    /// @notice Sets new treasury address
    /// @param treasury_ new treasury address
    function setTreasury(address treasury_) external onlyTreasury {
        treasury = treasury_;
    }

    /// @notice Allows recipient to claim all currently vested tokens
    function claim() external onlyRecipient overCliff {
        uint256 amount;
        if (block.timestamp >= vestingEnd) {
            amount = IERC20(index).balanceOf(address(this));
        } else {
            amount = vestingAmount.mul(block.timestamp.sub(lastUpdate)).div(vestingEnd.sub(vestingBegin));
            lastUpdate = block.timestamp;
        }
        IERC20(index).transfer(recipient, amount);
    }

    /// @notice Allows treasury to claw back funds in event of separation from recipient
    function clawback() external onlyTreasury {
        IERC20(index).transfer(treasury, IERC20(index).balanceOf(address(this)));
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.6.10;

import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { MerkleProof } from "@openzeppelin/contracts/cryptography/MerkleProof.sol";
import { IMerkleDistributor } from "../interfaces/IMerkleDistributor.sol";

contract MerkleDistributor is IMerkleDistributor {
    address public immutable override token;
    bytes32 public immutable override merkleRoot;

    // This is a packed array of booleans.
    mapping(uint256 => uint256) private claimedBitMap;

    constructor(address token_, bytes32 merkleRoot_) public {
        token = token_;
        merkleRoot = merkleRoot_;
    }

    function isClaimed(uint256 index) public view override returns (bool) {
        uint256 claimedWordIndex = index / 256;
        uint256 claimedBitIndex = index % 256;
        uint256 claimedWord = claimedBitMap[claimedWordIndex];
        uint256 mask = (1 << claimedBitIndex);
        return claimedWord & mask == mask;
    }

    function _setClaimed(uint256 index) private {
        uint256 claimedWordIndex = index / 256;
        uint256 claimedBitIndex = index % 256;
        claimedBitMap[claimedWordIndex] = claimedBitMap[claimedWordIndex] | (1 << claimedBitIndex);
    }

    function claim(uint256 index, address account, uint256 amount, bytes32[] calldata merkleProof) external override {
        require(!isClaimed(index), "MerkleDistributor: Drop already claimed.");

        // Verify the merkle proof.
        bytes32 node = keccak256(abi.encodePacked(index, account, amount));
        require(MerkleProof.verify(merkleProof, merkleRoot, node), "MerkleDistributor: Invalid proof.");

        // Mark it claimed and send the token.
        _setClaimed(index);
        require(IERC20(token).transfer(account, amount), "MerkleDistributor: Transfer failed.");

        emit Claimed(index, account, amount);
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.6.10;

// Allows anyone to claim a token if they exist in a merkle root.
interface IMerkleDistributor {
    // Returns the address of the token distributed by this contract.
    function token() external view returns (address);
    // Returns the merkle root of the merkle tree containing account balances available to claim.
    function merkleRoot() external view returns (bytes32);
    // Returns true if the index has been marked claimed.
    function isClaimed(uint256 index) external view returns (bool);
    // Claim the given amount of the token to the given address. Reverts if the inputs are invalid.
    function claim(uint256 index, address account, uint256 amount, bytes32[] calldata merkleProof) external;

    // This event is triggered whenever a call to #claim succeeds.
    event Claimed(uint256 index, address account, uint256 amount);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev These functions deal with verification of Merkle trees (hash trees),
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(bytes32[] memory proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        bytes32 computedHash = leaf;

        for (uint256 i = 0; i < proof.length; i++) {
            bytes32 proofElement = proof[i];

            if (computedHash <= proofElement) {
                // Hash(current computed hash + current element of the proof)
                computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
            } else {
                // Hash(current element of the proof + current computed hash)
                computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
            }
        }

        // Check if the computed hash (root) is equal to the provided root
        return computedHash == root;
    }
}

// SPDX-License-Identifier: Apache License, Version 2.0
pragma solidity 0.6.10;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";



contract ZeroExExchangeProxyMock {

    // Originally I also wanted to test Custom error handling,
    // but refrained from doing so, since the necessary upgrade of ethers lead to a lot of typescript issues.
    // TODO: Add Custom error handling test when ethers.js is upgraded to a compatible version
    enum ErrorType {
        None,
        RevertMessage,
        CustomError
    }

    // Mappings to control amount of buy / sell token transfered
    mapping(address => uint256) public buyAmountMultipliers;
    mapping(address => uint256) public sellAmountMultipliers;
    mapping(address => ErrorType) public errorMapping;


    string public constant testRevertMessage = "test revert message";

    // Method mocking the UniswapFeature of the zeroEx setup in tests
    // Returns the `minBuyAmount` of target token to the caller, which needs to be deposited into this contract beforehand
    // Original Implementation: https://github.com/0xProject/protocol/blob/development/contracts/zero-ex/contracts/src/features/UniswapFeature.sol#L99
    function sellToUniswap(
        IERC20[] calldata tokens,
        uint256 sellAmount,
        uint256 minBuyAmount,
        bool // isSushi
    )
        external
        payable
        returns (uint256 buyAmount)
    {
        require(tokens.length > 1, "UniswapFeature/InvalidTokensLength");
        IERC20 sellToken = tokens[0];
        IERC20 buyToken = tokens[tokens.length - 1];


        _throwErrorIfNeeded(sellToken);

        uint256 multipliedSellAmount = getSellAmount(sellToken, sellAmount);
        sellToken.transferFrom(msg.sender, address(this), multipliedSellAmount);

        buyAmount = getBuyAmount(buyToken, minBuyAmount);
        buyToken.transfer(msg.sender, buyAmount);
    }

    function _throwErrorIfNeeded(IERC20 sellToken) internal
    {
        if (errorMapping[address(sellToken)] == ErrorType.RevertMessage) {
            revert(testRevertMessage);
        } 
    }

    function getBuyAmount(
        IERC20 buyToken,
        uint256 minBuyAmount
    ) public view returns (uint256 buyAmount) {
        uint256 buyMultiplier = buyAmountMultipliers[address(buyToken)];
        if (buyMultiplier == 0) {
            buyAmount = minBuyAmount;
        }
        else{
            buyAmount = (minBuyAmount * buyMultiplier) / 10**18;
        }
    }

    // Function to adjust the amount of buy token that will be returned 
    // Set to 0 to disable / i.e. always return exact minBuyAmount
    function setBuyMultiplier(
        IERC20 buyToken,
        uint256 multiplier
    ) public {
        buyAmountMultipliers[address(buyToken)] = multiplier;
    }

    function getSellAmount(
        IERC20 sellToken,
        uint256 inputSellAmount
    ) public view returns (uint256 sellAmount) {
        uint256 sellMultiplier = sellAmountMultipliers[address(sellToken)];
        if (sellMultiplier == 0) {
            sellAmount = inputSellAmount;
        }
        else{
            sellAmount = (inputSellAmount * sellMultiplier) / 10**18;
        }
    }

    // Function to adjust the amount of sell token that will be returned 
    // Set to 0 to disable / i.e. always return exact minSellAmount
    function setSellMultiplier(
        IERC20 sellToken,
        uint256 multiplier
    ) public {
        sellAmountMultipliers[address(sellToken)] = multiplier;
    }

    function setErrorMapping(
        address sellToken,
        ErrorType errorType
    ) public {
        errorMapping[sellToken] = errorType;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {
    "contracts/exchangeIssuance/DEXAdapter.sol": {
      "DEXAdapter": "0xbb02bcce1bdcc0b07e7870346d8b2ad9397d0fac"
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"components":[{"internalType":"address","name":"quickRouter","type":"address"},{"internalType":"address","name":"sushiRouter","type":"address"},{"internalType":"address","name":"uniV3Router","type":"address"},{"internalType":"address","name":"uniV3Quoter","type":"address"},{"internalType":"address","name":"curveAddressProvider","type":"address"},{"internalType":"address","name":"curveCalculator","type":"address"},{"internalType":"address","name":"weth","type":"address"}],"internalType":"struct DEXAdapter.Addresses","name":"_dexAddresses","type":"tuple"},{"internalType":"contract IController","name":"_setController","type":"address"},{"internalType":"contract IDebtIssuanceModule","name":"_issuanceModule","type":"address"},{"internalType":"address","name":"_wrapModule","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_recipient","type":"address"},{"indexed":true,"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"indexed":true,"internalType":"contract IERC20","name":"_inputToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amountInputToken","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_amountSetIssued","type":"uint256"}],"name":"FlashMint","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_recipient","type":"address"},{"indexed":true,"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"indexed":true,"internalType":"contract IERC20","name":"_outputToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amountSetRedeemed","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_amountOutputToken","type":"uint256"}],"name":"FlashRedeem","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"}],"name":"approveSetToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"dexAdapter","outputs":[{"internalType":"address","name":"quickRouter","type":"address"},{"internalType":"address","name":"sushiRouter","type":"address"},{"internalType":"address","name":"uniV3Router","type":"address"},{"internalType":"address","name":"uniV3Quoter","type":"address"},{"internalType":"address","name":"curveAddressProvider","type":"address"},{"internalType":"address","name":"curveCalculator","type":"address"},{"internalType":"address","name":"weth","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"internalType":"address","name":"_inputToken","type":"address"},{"internalType":"uint256","name":"_setAmount","type":"uint256"},{"components":[{"internalType":"address","name":"underlyingERC20","type":"address"},{"components":[{"internalType":"address[]","name":"path","type":"address[]"},{"internalType":"uint24[]","name":"fees","type":"uint24[]"},{"internalType":"address","name":"pool","type":"address"},{"internalType":"enum DEXAdapter.Exchange","name":"exchange","type":"uint8"}],"internalType":"struct DEXAdapter.SwapData","name":"dexData","type":"tuple"},{"internalType":"uint256","name":"buyUnderlyingAmount","type":"uint256"}],"internalType":"struct FlashMintWrapped.ComponentSwapData[]","name":"_swapData","type":"tuple[]"}],"name":"getIssueExactSet","outputs":[{"internalType":"uint256","name":"amountInputNeeded","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"internalType":"address","name":"_outputToken","type":"address"},{"internalType":"uint256","name":"_setAmount","type":"uint256"},{"components":[{"internalType":"address","name":"underlyingERC20","type":"address"},{"components":[{"internalType":"address[]","name":"path","type":"address[]"},{"internalType":"uint24[]","name":"fees","type":"uint24[]"},{"internalType":"address","name":"pool","type":"address"},{"internalType":"enum DEXAdapter.Exchange","name":"exchange","type":"uint8"}],"internalType":"struct DEXAdapter.SwapData","name":"dexData","type":"tuple"},{"internalType":"uint256","name":"buyUnderlyingAmount","type":"uint256"}],"internalType":"struct FlashMintWrapped.ComponentSwapData[]","name":"_swapData","type":"tuple[]"}],"name":"getRedeemExactSet","outputs":[{"internalType":"uint256","name":"amountOutputReceived","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"issuanceModule","outputs":[{"internalType":"contract IDebtIssuanceModule","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"internalType":"contract IERC20","name":"_inputToken","type":"address"},{"internalType":"uint256","name":"_amountSetToken","type":"uint256"},{"internalType":"uint256","name":"_maxAmountInputToken","type":"uint256"},{"components":[{"internalType":"address","name":"underlyingERC20","type":"address"},{"components":[{"internalType":"address[]","name":"path","type":"address[]"},{"internalType":"uint24[]","name":"fees","type":"uint24[]"},{"internalType":"address","name":"pool","type":"address"},{"internalType":"enum DEXAdapter.Exchange","name":"exchange","type":"uint8"}],"internalType":"struct DEXAdapter.SwapData","name":"dexData","type":"tuple"},{"internalType":"uint256","name":"buyUnderlyingAmount","type":"uint256"}],"internalType":"struct FlashMintWrapped.ComponentSwapData[]","name":"_swapData","type":"tuple[]"},{"components":[{"internalType":"string","name":"integrationName","type":"string"},{"internalType":"bytes","name":"wrapData","type":"bytes"}],"internalType":"struct FlashMintWrapped.ComponentWrapData[]","name":"_wrapData","type":"tuple[]"}],"name":"issueExactSetFromERC20","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"internalType":"uint256","name":"_amountSetToken","type":"uint256"},{"components":[{"internalType":"address","name":"underlyingERC20","type":"address"},{"components":[{"internalType":"address[]","name":"path","type":"address[]"},{"internalType":"uint24[]","name":"fees","type":"uint24[]"},{"internalType":"address","name":"pool","type":"address"},{"internalType":"enum DEXAdapter.Exchange","name":"exchange","type":"uint8"}],"internalType":"struct DEXAdapter.SwapData","name":"dexData","type":"tuple"},{"internalType":"uint256","name":"buyUnderlyingAmount","type":"uint256"}],"internalType":"struct FlashMintWrapped.ComponentSwapData[]","name":"_swapData","type":"tuple[]"},{"components":[{"internalType":"string","name":"integrationName","type":"string"},{"internalType":"bytes","name":"wrapData","type":"bytes"}],"internalType":"struct FlashMintWrapped.ComponentWrapData[]","name":"_wrapData","type":"tuple[]"}],"name":"issueExactSetFromETH","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"internalType":"contract IERC20","name":"_outputToken","type":"address"},{"internalType":"uint256","name":"_amountSetToken","type":"uint256"},{"internalType":"uint256","name":"_minOutputReceive","type":"uint256"},{"components":[{"internalType":"address","name":"underlyingERC20","type":"address"},{"components":[{"internalType":"address[]","name":"path","type":"address[]"},{"internalType":"uint24[]","name":"fees","type":"uint24[]"},{"internalType":"address","name":"pool","type":"address"},{"internalType":"enum DEXAdapter.Exchange","name":"exchange","type":"uint8"}],"internalType":"struct DEXAdapter.SwapData","name":"dexData","type":"tuple"},{"internalType":"uint256","name":"buyUnderlyingAmount","type":"uint256"}],"internalType":"struct FlashMintWrapped.ComponentSwapData[]","name":"_swapData","type":"tuple[]"},{"components":[{"internalType":"string","name":"integrationName","type":"string"},{"internalType":"bytes","name":"wrapData","type":"bytes"}],"internalType":"struct FlashMintWrapped.ComponentWrapData[]","name":"_unwrapData","type":"tuple[]"}],"name":"redeemExactSetForERC20","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ISetToken","name":"_setToken","type":"address"},{"internalType":"uint256","name":"_amountSetToken","type":"uint256"},{"internalType":"uint256","name":"_minOutputReceive","type":"uint256"},{"components":[{"internalType":"address","name":"underlyingERC20","type":"address"},{"components":[{"internalType":"address[]","name":"path","type":"address[]"},{"internalType":"uint24[]","name":"fees","type":"uint24[]"},{"internalType":"address","name":"pool","type":"address"},{"internalType":"enum DEXAdapter.Exchange","name":"exchange","type":"uint8"}],"internalType":"struct DEXAdapter.SwapData","name":"dexData","type":"tuple"},{"internalType":"uint256","name":"buyUnderlyingAmount","type":"uint256"}],"internalType":"struct FlashMintWrapped.ComponentSwapData[]","name":"_swapData","type":"tuple[]"},{"components":[{"internalType":"string","name":"integrationName","type":"string"},{"internalType":"bytes","name":"wrapData","type":"bytes"}],"internalType":"struct FlashMintWrapped.ComponentWrapData[]","name":"_unwrapData","type":"tuple[]"}],"name":"redeemExactSetForETH","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"setController","outputs":[{"internalType":"contract IController","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20[]","name":"_tokens","type":"address[]"},{"internalType":"address payable","name":"_to","type":"address"}],"name":"withdrawTokens","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"wrapModule","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

-----Decoded View---------------
Arg [0] : _dexAddresses (tuple): System.Collections.Generic.List`1[Nethereum.ABI.FunctionEncoding.ParameterOutput]
Arg [1] : _setController (address): 0xD2463675a099101E36D85278494268261a66603A
Arg [2] : _issuanceModule (address): 0xa0a98EB7Af028BE00d04e46e1316808A62a8fd59
Arg [3] : _wrapModule (address): 0xbfE0f7b4f9537A25d7C498161D6f24B38699a075

-----Encoded View---------------
10 Constructor Arguments found :
Arg [0] : 0000000000000000000000000000000000000000000000000000000000000000
Arg [1] : 000000000000000000000000d9e1ce17f2641f24ae83637ab66a2cca9c378b9f
Arg [2] : 000000000000000000000000e592427a0aece92de3edee1f18e0157c05861564
Arg [3] : 000000000000000000000000b27308f9f90d607463bb33ea1bebb41c27ce5ab6
Arg [4] : 0000000000000000000000000000000022d53366457f9d5e68ec105046fc4383
Arg [5] : 000000000000000000000000c1db00a8e5ef7bfa476395cdbcc98235477cde4e
Arg [6] : 000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2
Arg [7] : 000000000000000000000000d2463675a099101e36d85278494268261a66603a
Arg [8] : 000000000000000000000000a0a98eb7af028be00d04e46e1316808a62a8fd59
Arg [9] : 000000000000000000000000bfe0f7b4f9537a25d7c498161d6f24b38699a075